Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <4>CPU ProcId is: 0x00019740, options: 0x000021cd
- <4>Primary instruction cache 32kb, linesize 32 bytes (4 ways)
- <4>Primary data cache 32kb, linesize 32 bytes (4 ways)
- <4>Linux version 2.4.20 (tony@moonlight) (gcc version 3.2.3 with Broadcom modifications) #61 Fri Sep 3 16:02:24 CST 2010
- <4>Found a 8MB ST compatible serial flash
- <4>Determined physical RAM map:
- <4> memory: 04000000 @ 00000000 (usable)
- <4>On node 0 totalpages: 16384
- <4>zone(0): 16384 pages.
- <4>zone(1): 0 pages.
- <4>zone(2): 0 pages.
- <4>Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
- <4>CPU: BCM4716 rev 1 at 453 MHz
- <4>Calibrating delay loop... 226.09 BogoMIPS
- <6>Memory: 62676k/65536k available (1619k kernel code, 2860k reserved, 116k data, 60k init, 0k highmem)
- <6>Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
- <6>Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
- <4>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
- <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
- <4>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
- <4>Checking for 'wait' instruction... unavailable.
- <4>POSIX conformance testing by UNIFIX
- <4>PCI: Using membase 8000000
- <4>PCI: Initializing host
- <4>PCI: Reset RC
- <4>PCI: Fixing up bus 0
- <4>PCI: Fixing up bridge
- <4>PCI: Fixing up bridge
- <4>PCI: Enabling device 01:00.1 (0004 -> 0006)
- <4>PCI: Fixing up bus 1
- <6>Linux NET4.0 for Linux 2.4
- <6>Based upon Swansea University Computer Society NET3.039
- <4>Initializing RT netlink socket
- <4>Starting kswapd
- <6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
- <6>devfs: boot_options: 0x1
- <5>NTFS driver v1.1.22 [Flags: R/O]
- <6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
- <4>fuse init (API version 7.5)
- <4>fuse distribution version: 2.5.3
- <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
- <6>ttyS00 at 0xb8000300 (irq = 8) is a 16550A
- <6>PPP generic driver version 2.4.2
- <6>SCSI subsystem driver Revision: 1.00
- <3>pflash: found no supported devices
- <5>sflash: squash filesystem with lzma found at block 926
- <5>Creating 18 MTD partitions on "sflash":
- <5>0x00000000-0x00040000 : "boot"
- <5>0x00040000-0x00710000 : "linux"
- <5>0x000e7900-0x00710000 : "rootfs"
- <5>0x00710000-0x00720000 : "ML1"
- <5>0x00720000-0x00730000 : "ML2"
- <5>0x00730000-0x00740000 : "ML3"
- <5>0x00740000-0x00750000 : "ML4"
- <5>0x00750000-0x00760000 : "ML5"
- <5>0x00760000-0x00770000 : "ML6"
- <5>0x00770000-0x00780000 : "ML7"
- <5>0x00780000-0x00790000 : "ML8"
- <5>0x00790000-0x007a0000 : "ML9"
- <5>0x007a0000-0x007b0000 : "ML10"
- <5>0x007b0000-0x007c0000 : "T_Meter1"
- <5>0x007c0000-0x007d0000 : "T_Meter2"
- <5>0x007d0000-0x007e0000 : "POT"
- <5>0x007e0000-0x007f0000 : "board_data"
- <5>0x007f0000-0x00800000 : "nvram"
- <6>NET4: Linux TCP/IP 1.0 for NET4.0
- <6>IP Protocols: ICMP, UDP, TCP, IGMP
- <6>IP: routing cache hash table of 512 buckets, 4Kbytes
- <6>TCP: Hash tables configured (established 4096 bind 8192)
- <6>Linux IP multicast router 0.06 plus PIM-SM
- <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- <6>NET4: Ethernet Bridge 008 for NET4.0
- <1>802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
- <1>All bugs added by David S. Miller <davem@redhat.com>
- <4>FAT: bogus logical sector size 15415
- <4>FAT: bogus logical sector size 15415
- <3>NTFS: Unable to set blocksize 512.
- <4>VFS: Mounted root (squashfs filesystem) readonly.
- <6>Mounted devfs on /dev
- <6>Freeing unused kernel memory: 60k freed
- <4>eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.144.3
- <4>eth1: Broadcom BCM4329 802.11 Wireless Controller 5.10.144.5
- <4>PCI: Enabling device 01:01.0 (0000 -> 0002)
- <4>eth2: Broadcom BCMa8d8 802.11 Wireless Controller 5.10.144.5
- <4>Algorithmics/MIPS FPU Emulator v1.5
- <6>vlan1: dev_set_allmulti(master, 1)
- <6>vlan1: dev_set_promiscuity(master, 1)
- <6>device eth0 entered promiscuous mode
- <6>device vlan1 entered promiscuous mode
- <6>device eth1 entered promiscuous mode
- <6>device eth2 entered promiscuous mode
- <6>br0: port 3(eth2) entering learning state
- <6>br0: port 2(eth1) entering learning state
- <6>br0: port 1(vlan1) entering learning state
- <6>br0: port 3(eth2) entering forwarding state
- <6>br0: topology change detected, propagating
- <6>br0: port 2(eth1) entering forwarding state
- <6>br0: topology change detected, propagating
- <6>br0: port 1(vlan1) entering forwarding state
- <6>br0: topology change detected, propagating
- <6>usb.c: registered new driver usbdevfs
- <6>usb.c: registered new driver hub
- <4>USB20H mdio control register : 0x80000008
- <6>ehci_hcd 00:04.1: PCI device 14e4:471a
- <6>ehci_hcd 00:04.1: irq 5, pci mem b8004000
- <6>usb.c: new USB bus registered, assigned bus number 1
- <7>ehci_hcd 00:04.1: ehci_start hcs_params 0x1212 dbg=0 cc=1 pcc=2 ordered ports=2
- <7>ehci_hcd 00:04.1: ehci_start hcc_params a010 thresh 1 uframes 1024
- <7>ehci_hcd 00:04.1: capability 0000 at a0
- <4>ehci_hcd 00:04.1: illegal capability!
- <7>ehci_hcd 00:04.1: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
- <4>PCI: 00:04.1 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
- <7>ehci_hcd 00:04.1: init command 010001 (park)=0 ithresh=1 period=1024 RUN
- <6>ehci_hcd 00:04.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
- <7>hcd.c: 00:04.1 root hub device address 1
- <7>usb.c: kmalloc IF 8398d760, numif 1
- <7>usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
- <7>usb.c: USB device number 1 default language ID 0x0
- <6>Manufacturer: Linux 2.4.20 ehci_hcd
- <6>Product: PCI device 14e4:471a
- <6>SerialNumber: 00:04.1
- <6>hub.c: USB hub found
- <6>hub.c: 2 ports detected
- <7>hub.c: standalone hub
- <7>hub.c: individual port power switching
- <7>hub.c: individual port over-current protection
- <7>hub.c: Single TT
- <7>hub.c: TT requires at most 8 FS bit times
- <7>hub.c: Port indicators are not supported
- <7>hub.c: power on to power good time: 20ms
- <7>hub.c: hub controller current requirement: 0mA
- <7>hub.c: port removable status: RR
- <7>hub.c: local power source is good
- <7>hub.c: no over-current condition exists
- <7>hub.c: enabling power on all ports
- <7>usb.c: hub driver claimed interface 8398d760
- <7>usb.c: kusbd: /sbin/hotplug add 1
- <4>USB20H mdio control register : 0x80000008
- <6>usb-ohci.c: USB OHCI at membase 0xb8009000, IRQ 5
- <6>usb-ohci.c: usb-00:04.0, PCI device 14e4:471a
- <6>usb.c: new USB bus registered, assigned bus number 2
- <7>usb.c: kmalloc IF 8398d880, numif 1
- <7>usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
- <7>usb.c: USB device number 1 default language ID 0x0
- <6>Product: USB OHCI Root Hub
- <6>SerialNumber: b8009000
- <6>hub.c: USB hub found
- <6>hub.c: 2 ports detected
- <7>hub.c: standalone hub
- <7>hub.c: ganged power switching
- <7>hub.c: no over-current protection
- <7>hub.c: Port indicators are not supported
- <7>hub.c: power on to power good time: 4ms
- <7>hub.c: hub controller current requirement: 0mA
- <7>hub.c: port removable status: RR
- <7>hub.c: local power source is good
- <7>hub.c: no over-current condition exists
- <7>hub.c: enabling power on all ports
- <7>usb.c: hub driver claimed interface 8398d880
- <7>usb.c: kusbd: /sbin/hotplug add 1
- <6>Initializing USB Mass Storage driver...
- <6>usb.c: registered new driver usb-storage
- <6>USB Mass Storage support registered.
- <0>IOCTL_AG_REGION_SET: English
- <6>br0: port 1(vlan1) entering disabled state
- <6>vlan1: dev_set_promiscuity(master, 1)
- <6>br0: port 1(vlan1) entering learning state
- <6>br0: port 1(vlan1) entering forwarding state
- <6>br0: topology change detected, propagating
- <6>br0: port 2(eth1) entering disabled state
- <6>br0: port 2(eth1) entering disabled state
- <6>device eth1 left promiscuous mode
- <6>br0: port 3(eth2) entering disabled state
- <6>br0: port 3(eth2) entering disabled state
- <6>device eth2 left promiscuous mode
- <6>device eth1 entered promiscuous mode
- <6>br0: port 2(eth1) entering learning state
- <6>br0: port 2(eth1) entering forwarding state
- <6>br0: topology change detected, propagating
- <6>device eth2 entered promiscuous mode
- <6>br0: port 3(eth2) entering learning state
- <6>br0: port 3(eth2) entering forwarding state
- <6>br0: topology change detected, propagating
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement