API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 29th, 2016
90
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.91 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. fel_flag = 0x00000000
  4. rtc[0] value = 0x00000000
  5. rtc[1] value = 0x00000000
  6. rtc[2] value = 0x00000000
  7. rtc[3] value = 0x00000000
  8. rtc[4] value = 0x00000000
  9. rtc[5] value = 0x00000000
  10. rtc[6] value = 0x00000000
  11. rtc[7] value = 0x00000000
  12. DRAM DRIVE INFO: V0.8
  13. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  14. DRAM CLK = 672 MHz
  15. DRAM zq value: 003b3bfb
  16. READ DQS LCDL = 00202020
  17. DRAM SIZE =512 M
  18. odt delay
  19. dram size =512
  20. card boot number = 0
  21. card no is 0
  22. sdcard 0 line count 4
  23. [mmc]: mmc driver ver 2014-12-10 21:20:39
  24. [mmc]: ***Try SD card 0***
  25. [mmc]: SD/MMC Card: 4bit, capacity: 7681MB
  26. [mmc]: vendor: Man 00002020 Snr e58ebeb8
  27. [mmc]: product: N/A
  28. [mmc]: revision: 1.0
  29. [mmc]: ***SD/MMC 0 init OK!!!***
  30. sdcard 0 init ok
  31. The size of uboot is 000dc000.
  32. sum=ede66ee7
  33. src_sum=ede66ee7
  34. Succeed in loading uboot from sdmmc flash.
  35. Ready to disable icache.
  36. Jump to secend Boot.
  37. SUNXI_NORMAL_MODE
  38. [ 0.346]e mode
  39.  
  40. U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology
  41.  
  42. [ 0.353]version: 1.1.0
  43. normal mode
  44. [ 0.361]pmbus: ready
  45. not set main pmu id
  46. axp_probe error
  47. sunxi_set_cpux_voltage_by_i2c error
  48. [ 0.379]PMU: pll1 1200 Mhz,PLL6=600 Mhz
  49. AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
  50. sid read already
  51. fel key new mode
  52. run key detect
  53. no key found
  54. no key input
  55. dram_para_set start
  56. dram_para_set end
  57. normal mode
  58. [ 0.409]DRAM: 512 MiB
  59. relocation Offset is: 15af9000
  60. [box standby] read rtc = 0x0
  61. [box_start_os] mag be start_type no use
  62. user_gpio config
  63. user_gpio ok
  64. gic: normal or no secure os mode
  65. workmode = 0
  66. MMC: 0
  67. [ 0.484][mmc]: mmc driver ver 2014-12-10 9:23:00
  68. [ 0.489][mmc]: get sdc_phy_wipe fail.
  69. [ 0.493][mmc]: get sdc0 sdc_erase fail.
  70. [ 0.497][mmc]: get sdc_f_max fail,use default 50000000Hz
  71. [ 0.502][mmc]: get sdc_ex_dly_used fail,use default dly
  72. [ 0.508][mmc]: SUNXI SD/MMC: 0
  73. [ 0.521][mmc]: *Try SD card 0*
  74. [ 0.554][mmc]: CID 0x20204e 0x2f412020 0x10e58ebe 0xb80102b1
  75. [ 0.559][mmc]: mmc clk 50000000
  76. [ 0.562][mmc]: SD/MMC Card: 4bit, capacity: 7681MB
  77. [ 0.567][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  78. [ 0.573][mmc]: ***SD/MMC 0 init OK!!!***
  79. [ 0.578][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  80. [ 0.583][mmc]: secure_feature 0x0
  81. [ 0.587][mmc]: secure_removal_type 0x0
  82. [ 0.591]sunxi flash init ok
  83. script config pll_de to 864 Mhz
  84. Not Found clk pll_video1 in script
  85. script config pll_video to 297 Mhz
  86. [boot]disp_init_tv
  87. [DISP_TV] disp_init_tv enter g_tv_used
  88. screen 0 do not support TV TYPE!
  89. [BOOOT_DISP_TV] disp tv device_registered
  90. unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
  91. enable power vcc-hdmi-18, ret=-1
  92. DRV_DISP_Init end
  93. boot_disp.auto_hpd=1
  94. auto hpd check has 0 times!
  95. [disk_read_fs] no the partition
  96. error: open disp_rsl.fex, maybe it is not exist
  97. attched ok, mgr0<-->device0, type=4, mode=4----
  98. ready to set mode
  99. [ 1.473]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
  100. fail to find part named env
  101. Using default environment
  102.  
  103. In: serial
  104. Out: serial
  105. Err: serial
  106. --------fastboot partitions--------
  107. mbr not exist
  108. base bootcmd=run setargs_mmc boot_normal
  109. bootcmd set setargs_mmc
  110. key 0
  111. cant find rcvy value
  112. cant find fstbt value
  113. no misc partition is found
  114. to be run cmd=run setargs_mmc boot_normal
  115. [ 1.511][mmc]: MMC Device 2 not found
  116. [ 1.515][mmc]: Can not find mmc dev
  117. [ 1.518][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1849
  118. sunxi_secstorage_read fail
  119. get secure storage map err
  120. the private part isn't exist
  121. WORK_MODE_BOOT
  122. adver not need show
  123. sunxi_bmp_logo_display
  124. [disk_read_fs] no the partition
  125. error: open bootlogo.bmp, maybe it is not exist
  126. sunxi bmp info error : unable to open logo file bootlogo.bmp
  127. [ 1.551]Hit any key to stop autoboot: 0
  128. ## Booting kernel from Legacy Image at 40007800 ...
  129. Image Name: Linux-3.4.39
  130. Image Type: ARM Linux Kernel Image (uncompressed)
  131. Data Size: 5039448 Bytes = 4.8 MiB
  132. Load Address: 40008000
  133. Entry Point: 40008000
  134. Verifying Checksum ... OK
  135. Loading Kernel Image ... OK
  136. OK
  137. [ 5.135][mmc]: MMC Device 2 not found
  138. [ 5.139][mmc]: mmc not find,so not exit
  139. [ 5.143]
  140. Starting kernel ...
  141.  
  142. [sun8i_fixup]: From boot, get meminfo:
  143. Start: 0x40000000
  144. Size: 512MB
  145. ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
  146. ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
  147. [ 0.000000] Booting Linux on physical CPU 0
  148. [ 0.000000] Initializing cgroup subsys cpu
  149. [ 0.000000] Linux version 3.4.39 (allwinner@steven) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #41 SMP PREEMPT Sun Jun 21 13:09:26 HKT 2015
  150. [ 0.000000] Ignoring tag cmdline (using the default kernel command line)
  151. [ 0.000000] bootconsole [earlycon0] enabled
  152. [ 0.000000] cma: CMA: reserved 160 MiB at 56000000
  153. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  154. [ 0.000000] On node 0 totalpages: 131072
  155. [ 0.000000] free_area_init_node: node 0, pgdat c0a6d6c0, node_mem_map c0b49000
  156. [ 0.000000] Normal zone: 1152 pages used for memmap
  157. [ 0.000000] Normal zone: 0 pages reserved
  158. [ 0.000000] Normal zone: 129920 pages, LIFO batch:31
  159. [ 0.000000] script_init enter!
  160. [ 0.000000] script_init exit!
  161. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fdb000 s11840 r8192 d12736 u32768
  162. [ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
  163. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  164. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
  165. [ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  166. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  167. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  168. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  169. [ 0.000000] Memory: 512MB = 512MB total
  170. [ 0.000000] Memory: 343104k/343104k available, 181184k reserved, 0K highmem
  171. [ 0.000000] Virtual kernel memory layout:
  172. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  173. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  174. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  175. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  176. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  177. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  178. [ 0.000000] .text : 0xc0008000 - 0xc099e7e4 (9818 kB)
  179. [ 0.000000] .init : 0xc099f000 - 0xc09f1e40 ( 332 kB)
  180. [ 0.000000] .data : 0xc09f2000 - 0xc0a70138 ( 505 kB)
  181. [ 0.000000] .bss : 0xc0a708ec - 0xc0b489b8 ( 865 kB)
  182. [ 0.000000] Preemptible hierarchical RCU implementation.
  183. [ 0.000000] Additional per-CPU info printed with stalls.
  184. [ 0.000000] NR_IRQS:544
  185. [ 0.000000] Architected local timer running at 24.00MHz.
  186. [ 0.000000] Switching to timer-based delay loop
  187. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  188. [ 0.000000] Console: colour dummy device 80x30
  189. [ 0.000000] console [tty0] enabled, bootconsole disabled
  190. [ 0.000000] Booting Linux on physical CPU 0
  191. [ 0.000000] Initializing cgroup subsys cpu
  192. [ 0.000000] Linux version 3.4.39 (allwinner@steven) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #41 SMP PREEMPT Sun Jun 21 13:09:26 HKT 2015
  193. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  194. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  195. [ 0.000000] Machine: sun8i
  196. [ 0.000000] Ignoring tag cmdline (using the default kernel command line)
  197. [ 0.000000] bootconsole [earlycon0] enabled
  198. [ 0.000000] cma: CMA: reserved 160 MiB at 56000000
  199. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  200. [ 0.000000] On node 0 totalpages: 131072
  201. [ 0.000000] free_area_init_node: node 0, pgdat c0a6d6c0, node_mem_map c0b49000
  202. [ 0.000000] Normal zone: 1152 pages used for memmap
  203. [ 0.000000] Normal zone: 0 pages reserved
  204. [ 0.000000] Normal zone: 129920 pages, LIFO batch:31
  205. [ 0.000000] script_init enter!
  206. [ 0.000000] script_init exit!
  207. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fdb000 s11840 r8192 d12736 u32768
  208. [ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
  209. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  210. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
  211. [ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  212. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  213. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  214. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  215. [ 0.000000] Memory: 512MB = 512MB total
  216. [ 0.000000] Memory: 343104k/343104k available, 181184k reserved, 0K highmem
  217. [ 0.000000] Virtual kernel memory layout:
  218. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  219. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  220. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  221. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  222. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  223. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  224. [ 0.000000] .text : 0xc0008000 - 0xc099e7e4 (9818 kB)
  225. [ 0.000000] .init : 0xc099f000 - 0xc09f1e40 ( 332 kB)
  226. [ 0.000000] .data : 0xc09f2000 - 0xc0a70138 ( 505 kB)
  227. [ 0.000000] .bss : 0xc0a708ec - 0xc0b489b8 ( 865 kB)
  228. [ 0.000000] Preemptible hierarchical RCU implementation.
  229. [ 0.000000] Additional per-CPU info printed with stalls.
  230. [ 0.000000] NR_IRQS:544
  231. [ 0.000000] Architected local timer running at 24.00MHz.
  232. [ 0.000000] Switching to timer-based delay loop
  233. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  234. [ 0.000000] Console: colour dummy device 80x30
  235. [ 0.000000] console [tty0] enabled, bootconsole disabled
  236. [ 0.019904] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  237. [ 0.019958] pid_max: default: 32768 minimum: 301
  238. [ 0.020222] Mount-cache hash table entries: 512
  239. [ 0.021095] Initializing cgroup subsys cpuacct
  240. [ 0.021124] Initializing cgroup subsys freezer
  241. [ 0.021170] CPU: Testing write buffer coherency: ok
  242. [ 0.021232] ftrace: allocating 25659 entries in 76 pages
  243. [ 0.050251] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  244. [ 0.050284] [sunxi_smp_prepare_cpus] enter
  245. [ 0.050326] Setting up static identity map for 0x406b9730 - 0x406b9788
  246. [ 0.051159] CPU1: Booted secondary processor
  247. [ 0.051159] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  248. [ 0.051291] CPU2: Booted secondary processor
  249. [ 0.051291] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  250. [ 0.051291] CPU3: Booted secondary processor
  251. [ 0.051291] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  252. [ 0.060169] Brought up 4 CPUs
  253. [ 0.060252] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  254. [ 0.060826] devtmpfs: initialized
  255. [ 0.063284] wakeup src cnt is : 1.
  256. [ 0.063304] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
  257. [ 0.063328] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
  258. [ 0.063352] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
  259. [ 0.063377] sunxi pm init
  260. [ 0.063507] pinctrl core: initialized pinctrl subsystem
  261. [ 0.070952] NET: Registered protocol family 16
  262. [ 0.071660] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  263. [ 0.071660] script_sysfs_init success
  264. [ 0.071660] sunxi_dump_init success
  265. [ 0.072149] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  266. [ 0.072149] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  267. [ 0.072149] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  268. [ 0.072149] hw-breakpoint: maximum watchpoint size is 8 bytes.
  269. [ 0.072149] script config pll_video to 297 Mhz
  270. [ 0.072149] script config pll_de to 864 Mhz
  271. [ 0.072149] script config pll_ve to 402 Mhz
  272. [ 0.072149] sunxi_default_clk_init
  273. [ 0.072149] try to set pll6ahb1 to 200000000
  274. [ 0.072149] try to set ahb clk source to pll6ahb1
  275. [ 0.072149] set ahb clk source to pll6ahb1
  276. [ 0.072149] try to set ahb1 to 200000000
  277. [ 0.072149] try to set apb1 to 100000000
  278. [ 0.072424] ===fe3o4==== sunxi_root_procfs_attach ret:0
  279. [ 0.080215] bio: create slab <bio-0> at 0
  280. [ 0.080365] [ARISC] :sunxi-arisc driver v1.04
  281. [ 0.091962] [ARISC] :arisc version: [v0.1.34]
  282. [ 0.170465] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
  283. [ 0.171858] SCSI subsystem initialized
  284. [ 0.171858] usbcore: registered new interface driver usbfs
  285. <6>[ 0.171858] usbcore: registered new interface driver hub
  286. [ 0.180039] usbcore: registered new device driver usb
  287. [ 0.180152] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  288. [ 0.180176] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  289. [ 0.180199] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  290. [ 0.180521] Linux video capture interface: v2.00
  291. [ 0.180700] Advanced Linux Sound Architecture Driver Version 1.0.25.
  292. [ 0.181169] Bluetooth: Core ver 2.16
  293. [ 0.181214] NET: Registered protocol family 31
  294. [ 0.181236] Bluetooth: HCI device and connection manager initialized
  295. [ 0.181263] Bluetooth: HCI socket layer initialized
  296. [ 0.181283] Bluetooth: L2CAP socket layer initialized
  297. [ 0.181323] Bluetooth: SCO socket layer initialized
  298. [ 0.181533] cfg80211: Calling CRDA to update world regulatory domain
  299. [ 0.181611] Switching to clocksource arch_sys_counter
  300. [ 0.192120] FS-Cache: Loaded
  301. [ 0.192398] CacheFiles: Loaded
  302. [ 0.202325] NET: Registered protocol family 2
  303. [ 0.202588] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  304. [ 0.203080] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  305. [ 0.203324] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  306. [ 0.203543] TCP: Hash tables configured (established 16384 bind 16384)
  307. [ 0.203568] TCP: reno registered
  308. [ 0.203586] UDP hash table entries: 256 (order: 1, 8192 bytes)
  309. [ 0.203621] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  310. [ 0.203879] NET: Registered protocol family 1
  311. [ 0.204203] RPC: Registered named UNIX socket transport module.
  312. [ 0.204230] RPC: Registered udp transport module.
  313. [ 0.204249] RPC: Registered tcp transport module.
  314. [ 0.204267] RPC: Registered tcp NFSv4.1 backchannel transport module.
  315. [ 0.204723] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  316. [ 0.204836] sunxi_reg_init enter
  317. [ 0.205453] audit: initializing netlink socket (disabled)
  318. [ 0.205503] type=2000 audit(0.200:1): initialized
  319. [ 0.207431] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  320. [ 0.208090] NTFS driver 2.1.30 [Flags: R/W].
  321. [ 0.208208] fuse init (API version 7.18)
  322. [ 0.208893] Btrfs loaded
  323. [ 0.208925] msgmni has been set to 990
  324. [ 0.209906] io scheduler noop registered
  325. [ 0.209932] io scheduler deadline registered (default)
  326. [ 0.210055] io scheduler cfq registered
  327. [ 0.210458] [DISP]disp_module_init
  328. [ 0.210739] cmdline,disp=
  329. [ 0.217233] [DISP] Fb_map_kernel_logo,line:925:Fb_map_kernel_logo failed!
  330. [ 0.230019] Console: switching to colour frame buffer device 160x45
  331. [ 0.242904] [DISP]disp_module_init finish
  332. [ 0.243187] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
  333. [ 0.243605] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  334. [ 0.243750] sw_uart_pm()890 - uart0 clk is already enable
  335. [ 0.243881] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  336. [ 0.435861] console [ttyS0] enabled
  337. [ 0.570948] sunxi_cmatest_init enter
  338. [ 0.750069] sunxi_cmatest_init success
  339. [ 0.753749] loop: module loaded
  340. [ 0.870178] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
  341. [ 1.028925] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
  342. [ 1.176729] tun: Universal TUN/TAP device driver, 1.6
  343. [ 1.475261] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  344. [ 1.552084] can't get item for emac_power gpio !
  345. [ 1.561106] PPP generic driver version 2.4.2
  346. [ 1.569354] PPP BSD Compression module registered
  347. [ 1.577921] PPP Deflate Compression module registered
  348. [ 1.587599] PPP MPPE Compression module registered
  349. [ 1.596259] NET: Registered protocol family 24
  350. [ 1.604499] PPTP driver version 0.8.5
  351. [ 1.612004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!