API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 19th, 2017
92
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.28 KB | None | 0 0
raw download clone embed print report
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Western Digital Scorpio Blue Serial ATA
  3. Device Model: WDC WD800BEVS-22RST0
  4. Serial Number: WD-WXEY07218440
  5. LU WWN Device Id: 5 0014ee 256175a02
  6. Firmware Version: 04.01G04
  7. User Capacity: 80,026,361,856 bytes [80.0 GB]
  8. Sector Size: 512 bytes logical/physical
  9. Device is: In smartctl database [for details use: -P show]
  10. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  11. Local Time is: Fri Jan 20 01:29:49 2017 UTC
  12. SMART support is: Available - device has SMART capability.
  13. SMART support is: Enabled
  14.  
  15. === START OF READ SMART DATA SECTION ===
  16. SMART overall-health self-assessment test result: PASSED
  17.  
  18. General SMART Values:
  19. Offline data collection status: (0x00) Offline data collection activity
  20. was never started.
  21. Auto Offline Data Collection: Disabled.
  22. Self-test execution status: ( 0) The previous self-test routine completed
  23. without error or no self-test has ever
  24. been run.
  25. Total time to complete Offline
  26. data collection: ( 3780) seconds.
  27. Offline data collection
  28. capabilities: (0x7b) SMART execute Offline immediate.
  29. Auto Offline data collection on/off support.
  30. Suspend Offline collection upon new
  31. command.
  32. Offline surface scan supported.
  33. Self-test supported.
  34. Conveyance Self-test supported.
  35. Selective Self-test supported.
  36. SMART capabilities: (0x0003) Saves SMART data before entering
  37. power-saving mode.
  38. Supports SMART auto save timer.
  39. Error logging capability: (0x01) Error logging supported.
  40. General Purpose Logging supported.
  41. Short self-test routine
  42. recommended polling time: ( 2) minutes.
  43. Extended self-test routine
  44. recommended polling time: ( 51) minutes.
  45. Conveyance self-test routine
  46. recommended polling time: ( 6) minutes.
  47. SCT capabilities: (0x103f) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x000f 197 197 051 Pre-fail Always - 99128
  56. 3 Spin_Up_Time 0x0003 160 159 021 Pre-fail Always - 1000
  57. 4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8573
  58. 5 Reallocated_Sector_Ct 0x0033 149 149 140 Pre-fail Always - 401
  59. 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 1
  60. 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 22605
  61. 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  62. 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
  63. 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5615
  64. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 509
  65. 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 624696
  66. 194 Temperature_Celsius 0x0022 104 078 000 Old_age Always - 39
  67. 196 Reallocated_Event_Count 0x0032 089 089 000 Old_age Always - 111
  68. 197 Current_Pending_Sector 0x0012 199 176 000 Old_age Always - 26
  69. 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
  70. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  71. 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
  72.  
  73. SMART Error Log Version: 1
  74. ATA Error Count: 10821 (device log contains only the most recent five errors)
  75. CR = Command Register [HEX]
  76. FR = Features Register [HEX]
  77. SC = Sector Count Register [HEX]
  78. SN = Sector Number Register [HEX]
  79. CL = Cylinder Low Register [HEX]
  80. CH = Cylinder High Register [HEX]
  81. DH = Device/Head Register [HEX]
  82. DC = Device Command Register [HEX]
  83. ER = Error register [HEX]
  84. ST = Status register [HEX]
  85. Powered_Up_Time is measured from power on, and printed as
  86. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  87. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  88.  
  89. Error 10821 occurred at disk power-on lifetime: 22605 hours (941 days + 21 hours)
  90. When the command that caused the error occurred, the device was active or idle.
  91.  
  92. After command completion occurred, registers were:
  93. ER ST SC SN CL CH DH
  94. -- -- -- -- -- -- --
  95. 01 51 00 05 73 71 40 Error: AMNF at LBA = 0x00717305 = 7435013
  96.  
  97. Commands leading to the command that caused the error were:
  98. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  99. -- -- -- -- -- -- -- -- ---------------- --------------------
  100. 60 01 c0 05 73 71 00 08 00:27:52.122 READ FPDMA QUEUED
  101. ef 10 02 00 00 00 00 08 00:27:52.121 SET FEATURES [Enable SATA feature]
  102. 27 00 00 00 00 00 00 08 00:27:52.121 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  103. ec 00 00 00 00 00 00 08 00:27:52.120 IDENTIFY DEVICE
  104. ef 03 46 00 00 00 00 08 00:27:52.120 SET FEATURES [Set transfer mode]
  105.  
  106. Error 10820 occurred at disk power-on lifetime: 22605 hours (941 days + 21 hours)
  107. When the command that caused the error occurred, the device was active or idle.
  108.  
  109. After command completion occurred, registers were:
  110. ER ST SC SN CL CH DH
  111. -- -- -- -- -- -- --
  112. 01 51 00 01 73 71 40 Error: AMNF at LBA = 0x00717301 = 7435009
  113.  
  114. Commands leading to the command that caused the error were:
  115. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  116. -- -- -- -- -- -- -- -- ---------------- --------------------
  117. 60 01 48 01 73 71 00 08 00:27:48.648 READ FPDMA QUEUED
  118. 60 01 40 05 73 71 00 08 00:27:48.648 READ FPDMA QUEUED
  119. ef 10 02 00 00 00 00 08 00:27:48.647 SET FEATURES [Enable SATA feature]
  120. 27 00 00 00 00 00 00 08 00:27:48.647 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  121. ec 00 00 00 00 00 00 08 00:27:48.647 IDENTIFY DEVICE
  122.  
  123. Error 10819 occurred at disk power-on lifetime: 22605 hours (941 days + 21 hours)
  124. When the command that caused the error occurred, the device was active or idle.
  125.  
  126. After command completion occurred, registers were:
  127. ER ST SC SN CL CH DH
  128. -- -- -- -- -- -- --
  129. 01 51 00 00 73 71 40 Error: AMNF at LBA = 0x00717300 = 7435008
  130.  
  131. Commands leading to the command that caused the error were:
  132. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  133. -- -- -- -- -- -- -- -- ---------------- --------------------
  134. 60 01 c8 05 73 71 00 08 00:27:45.163 READ FPDMA QUEUED
  135. 60 01 c0 01 73 71 00 08 00:27:45.163 READ FPDMA QUEUED
  136. 60 01 b8 00 73 71 00 08 00:27:45.163 READ FPDMA QUEUED
  137. ef 10 02 00 00 00 00 08 00:27:45.163 SET FEATURES [Enable SATA feature]
  138. 27 00 00 00 00 00 00 08 00:27:45.163 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  139.  
  140. Error 10818 occurred at disk power-on lifetime: 22605 hours (941 days + 21 hours)
  141. When the command that caused the error occurred, the device was active or idle.
  142.  
  143. After command completion occurred, registers were:
  144. ER ST SC SN CL CH DH
  145. -- -- -- -- -- -- --
  146. 01 51 00 05 73 71 40 Error: AMNF at LBA = 0x00717305 = 7435013
  147.  
  148. Commands leading to the command that caused the error were:
  149. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  150. -- -- -- -- -- -- -- -- ---------------- --------------------
  151. 60 01 28 03 73 71 00 08 00:27:39.293 READ FPDMA QUEUED
  152. 60 01 20 05 73 71 00 08 00:27:39.293 READ FPDMA QUEUED
  153. 60 01 18 04 73 71 00 08 00:27:39.293 READ FPDMA QUEUED
  154. ef 10 02 00 00 00 00 08 00:27:39.292 SET FEATURES [Enable SATA feature]
  155. 27 00 00 00 00 00 00 08 00:27:39.292 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  156.  
  157. Error 10817 occurred at disk power-on lifetime: 22605 hours (941 days + 21 hours)
  158. When the command that caused the error occurred, the device was active or idle.
  159.  
  160. After command completion occurred, registers were:
  161. ER ST SC SN CL CH DH
  162. -- -- -- -- -- -- --
  163. 01 51 00 01 73 71 40 Error: AMNF at LBA = 0x00717301 = 7435009
  164.  
  165. Commands leading to the command that caused the error were:
  166. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  167. -- -- -- -- -- -- -- -- ---------------- --------------------
  168. 60 01 90 04 73 71 00 08 00:27:35.799 READ FPDMA QUEUED
  169. 60 01 88 05 73 71 00 08 00:27:35.799 READ FPDMA QUEUED
  170. 60 01 80 01 73 71 00 08 00:27:35.798 READ FPDMA QUEUED
  171. 60 01 78 03 73 71 00 08 00:27:35.798 READ FPDMA QUEUED
  172. ef 10 02 00 00 00 00 08 00:27:35.796 SET FEATURES [Enable SATA feature]
  173.  
  174. SMART Self-test log structure revision number 1
  175. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  176.  
  177. SMART Selective self-test log data structure revision number 1
  178. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  179. 1 0 0 Not_testing
  180. 2 0 0 Not_testing
  181. 3 0 0 Not_testing
  182. 4 0 0 Not_testing
  183. 5 0 0 Not_testing
  184. Selective self-test flags (0x0):
  185. After scanning selected spans, do NOT read-scan remainder of disk.
  186. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!