Advertisement
Guest User

WR841N boot logs and faults #2

a guest
Nov 9th, 2013
190
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.46 KB | None | 0 0
  1. ## Booting image at 9f020000 ...
  2. Uncompressing Kernel Image ... OK
  3.  
  4. Starting kernel ...
  5.  
  6. [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 16:49:30 UTC 2013
  7. [ 0.000000] bootconsole [early0] enabled
  8. [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
  9. [ 0.000000] SoC: Atheros AR9341 rev 3
  10. [ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  11. [ 0.000000] Determined physical RAM map:
  12. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  13. [ 0.000000] Initrd not found or empty - disabling initrd
  14. [ 0.000000] Zone PFN ranges:
  15. [ 0.000000] Normal 0x00000000 -> 0x00002000
  16. [ 0.000000] Movable zone start PFN for each node
  17. [ 0.000000] Early memory PFN ranges
  18. [ 0.000000] 0: 0x00000000 -> 0x00002000
  19. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  20. [ 0.000000] Kernel command line: board=TL-WR841N-v8 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  21. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  24. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  25. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  26. [ 0.000000] Writing ErrCtl register=00000000
  27. [ 0.000000] Readback ErrCtl register=00000000
  28. [ 0.000000] Memory: 29000k/32768k available (2211k kernel code, 3768k reserved, 418k data, 212k init, 0k highmem)
  29. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  30. [ 0.000000] NR_IRQS:51
  31. [ 0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
  32. [ 0.080000] pid_max: default: 32768 minimum: 301
  33. [ 0.080000] Mount-cache hash table entries: 512
  34. [ 0.090000] NET: Registered protocol family 16
  35. [ 0.090000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
  36. [ 0.100000] MIPS: machine is TP-LINK TL-WR841N/ND v8
  37. [ 0.510000] bio: create slab <bio-0> at 0
  38. [ 0.520000] Switching to clocksource MIPS
  39. [ 0.530000] NET: Registered protocol family 2
  40. [ 0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  42. [ 0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.540000] TCP: Hash tables configured (established 1024 bind 1024)
  44. [ 0.550000] TCP reno registered
  45. [ 0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  46. [ 0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  47. [ 0.560000] NET: Registered protocol family 1
  48. [ 0.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  49. [ 0.590000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  50. [ 0.600000] msgmni has been set to 56
  51. [ 0.600000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  52. [ 0.610000] io scheduler noop registered
  53. [ 0.620000] io scheduler deadline registered (default)
  54. [ 0.620000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  55. [ 0.650000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  56. [ 0.660000] console [ttyS0] enabled, bootconsole disabled
  57. [ 0.660000] console [ttyS0] enabled, bootconsole disabled
  58. [ 0.670000] m25p80 spi0.0: found s25sl032a, expected m25p80
  59. [ 0.680000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
  60. [ 0.690000] 5 tp-link partitions found on MTD device spi0.0
  61. [ 0.690000] Creating 5 MTD partitions on "spi0.0":
  62. [ 0.700000] 0x000000000000-0x000000020000 : "u-boot"
  63. [ 0.700000] 0x000000020000-0x000000109c7c : "kernel"
  64. [ 0.710000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  65. [ 0.720000] 0x000000109c7c-0x0000003f0000 : "rootfs"
  66. [ 0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  67. [ 0.740000] mtd: partition "rootfs" set to be root filesystem
  68. [ 0.750000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=110000
  69. [ 0.760000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
  70. [ 0.760000] 0x0000003f0000-0x000000400000 : "art"
  71. [ 0.770000] 0x000000020000-0x0000003f0000 : "firmware"
  72. [ 0.800000] ag71xx_mdio: probed
  73. [ 0.800000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  74. [ 1.360000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd042, driver=Generic PHY]
  75. [ 1.370000] eth1: Atheros AG71xx at 0xba000000, irq 5
  76. [ 1.920000] eth1: Found an AR934X built-in switch
  77. [ 2.960000] TCP cubic registered
  78. [ 2.960000] NET: Registered protocol family 17
  79. [ 2.960000] Bridge firewalling registered
  80. [ 2.970000] 8021q: 802.1Q VLAN Support v1.8
  81. [ 2.980000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  82. [ 2.990000] Freeing unused kernel memory: 212k freed
  83. - preinit -
  84. Press the [f] key and hit [enter] to enter failsafe mode
  85. [ 7.370000] eth0: link up (100Mbps/Full duplex)
  86. - regular preinit -
  87. [ 8.000000] JFFS2 notice: (444) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 15 of xref (0 dead, 5 orphan) found.
  88. switching to jffs2
  89. - init -
  90. [ 8.170000] eth0: link down
  91.  
  92. Please press Enter to activate this console. [ 8.860000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
  93. [ 8.870000] Backport based on wireless-testing.git master-2012-09-07
  94. [ 8.870000] compat.git: wireless-testing.git
  95. [ 8.900000] cfg80211: Calling CRDA to update world regulatory domain
  96. [ 8.910000] cfg80211: World regulatory domain updated:
  97. [ 8.910000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  98. [ 8.920000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  99. [ 8.930000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  100. [ 8.940000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  101. [ 8.940000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  102. [ 8.950000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  103. [ 9.240000] usbcore: registered new interface driver usbfs
  104. [ 9.240000] usbcore: registered new interface driver hub
  105. [ 9.250000] usbcore: registered new device driver usb
  106. [ 9.720000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
  107. [ 9.730000] cfg80211: Calling CRDA for country: US
  108. [ 9.740000] cfg80211: Regulatory domain changed to country: US
  109. [ 9.740000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  110. [ 9.750000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  111. [ 9.760000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  112. [ 9.770000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  113. [ 9.780000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  114. [ 9.790000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  115. [ 9.790000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  116. [ 9.850000] PPP generic driver version 2.4.2
  117. [ 10.050000] ip_tables: (C) 2000-2006 Netfilter Core Team
  118. [ 10.230000] NET: Registered protocol family 24
  119. [ 10.240000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  120. [ 10.270000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
  121. [ 10.460000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  122. [ 14.690000] device eth1 entered promiscuous mode
  123. [ 15.290000] eth1: link up (1000Mbps/Full duplex)
  124. [ 15.290000] br-lan: port 1(eth1) entered forwarding state
  125. [ 15.300000] br-lan: port 1(eth1) entered forwarding state
  126. [ 15.450000] eth0: link up (100Mbps/Full duplex)
  127. [ 17.300000] br-lan: port 1(eth1) entered forwarding state
  128. [ 20.040000] cfg80211: Calling CRDA for country: RU
  129. [ 20.050000] cfg80211: Regulatory domain changed to country: RU
  130. [ 20.060000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  131. [ 20.060000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  132. [ 20.070000] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
  133.  
  134.  
  135.  
  136. BusyBox v1.19.4 (2013-03-14 11:28:31 UTC) built-in shell (ash)
  137. Enter 'help' for a list of built-in commands.
  138.  
  139. _______ ________ __
  140. | |.-----.-----.-----.| | | |.----.| |_
  141. | - || _ | -__| || | | || _|| _|
  142. |_______|| __|_____|__|__||________||__| |____|
  143. |__| W I R E L E S S F R E E D O M
  144. -----------------------------------------------------
  145. ATTITUDE ADJUSTMENT (12.09, r36088)
  146. -----------------------------------------------------
  147. * 1/4 oz Vodka Pour all ingredients into mixing
  148. * 1/4 oz Gin tin with ice, strain into glass.
  149. * 1/4 oz Amaretto
  150. * 1/4 oz Triple sec
  151. * 1/4 oz Peach schnapps
  152. * 1/4 oz Sour mix
  153. * 1 splash Cranberry juice
  154. -----------------------------------------------------
  155. root@OpenWrt:/# [ 26.370000] device wlan0 entered promiscuous mode
  156. [ 26.510000] br-lan: port 2(wlan0) entered forwarding state
  157. [ 26.510000] br-lan: port 2(wlan0) entered forwarding state
  158. [ 28.510000] br-lan: port 2(wlan0) entered forwarding state
  159.  
  160. root@OpenWrt:/# [ 38.210000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 800caf64, ra == 800c181c
  161. [ 38.220000] Oops[#1]:
  162. [ 38.220000] Cpu 0
  163. [ 38.220000] $ 0 : 00000000 7713e3dc 00000000 00000001
  164. [ 38.220000] $ 4 : 80f44c00 802f1124 e0ffffff 00000001
  165. [ 38.220000] $ 8 : 00000000 0000000a ffffffff 00000000
  166. [ 38.220000] $12 : 0a6a736f 81b2a3dc 00000000 771248b8
  167. [ 38.220000] $16 : 77164000 80f44c00 80f44c00 e10fe10f
  168. [ 38.220000] $20 : 80f41e24 00000000 00000000 802a0000
  169. [ 38.220000] $24 : 00000469 8006dabc
  170. [ 38.220000] $28 : 80f40000 80f41d90 00000000 800c181c
  171. [ 38.220000] Hi : 00000014
  172. [ 38.220000] Lo : 00000000
  173. [ 38.220000] epc : 800caf64 0x800caf64
  174. [ 38.220000] Tainted: G O
  175. [ 38.220000] ra : 800c181c 0x800c181c
  176. [ 38.220000] Status: 1100f403 KERNEL EXL IE
  177. [ 38.220000] Cause : 00800008
  178. [ 38.220000] BadVA : 00000000
  179. [ 38.220000] PrId : 0001974c (MIPS 74Kc)
  180. [ 38.220000] Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  181. [ 38.220000] Process jshn (pid: 1549, threadinfo=80f40000, task=80f21d18, tls=77196440)
  182. [ 38.220000] Stack : 81b626e0 81b72f78 e0ffffff 800c649c 77164000 80f44c00 80f44c00 e10fe10f
  183. [ 38.220000] 80f41e24 00000000 00000000 00400000 00000000 800c181c 81b72f78 81b0e000
  184. [ 38.220000] 77163fff 00000000 e10fe10f 800b4bd4 81b62b58 81b62b58 81b0e000 01020100
  185. [ 38.220000] 81b0e034 77661448 00460000 00000001 77661448 800c7424 7713cff4 80f00770
  186. [ 38.220000] 00000000 ffffffff 80f41e20 00000000 0000000b 81b0e000 c0030002 00000001
  187. [ 38.220000] ...
  188. [ 38.220000] Call Trace:[<800c649c>] 0x800c649c
  189. [ 38.220000] [<800c181c>] 0x800c181c
  190. [ 38.220000] [<800b4bd4>] 0x800b4bd4
  191. [ 38.220000] [<800c7424>] 0x800c7424
  192. [ 38.220000] [<8006fb68>] 0x8006fb68
  193. [ 38.220000] [<800738f0>] 0x800738f0
  194. [ 38.220000] [<80074df0>] 0x80074df0
  195. [ 38.220000] [<800d7a20>] 0x800d7a20
  196. [ 38.220000] [<80075484>] 0x80075484
  197. [ 38.220000] [<800c7b6c>] 0x800c7b6c
  198. [ 38.220000] [<800754c4>] 0x800754c4
  199. [ 38.220000] [<8006a204>] 0x8006a204
  200. [ 38.220000]
  201. [ 38.220000]
  202. [ 38.220000] Code: 8c820038 3c17802a 00809021 <8c550000> 2450fff8 00008821 26b5fff8 3c168035 26f76960
  203. [ 38.470000] ---[ end trace 025715181450a20d ]---
  204. [ 38.480000] Fixing recursive fault but reboot is needed!
  205.  
  206. root@OpenWrt:/# ps
  207. PID USER VSZ STAT COMMAND
  208. 1 root 1504 S init
  209. 2 root 0 SW [kthreadd]
  210. 3 root 0 SW [ksoftirqd/0]
  211. 4 root 0 SW [kworker/0:0]
  212. 5 root 0 SW [kworker/u:0]
  213. 6 root 0 SW< [khelper]
  214. 7 root 0 SW [kworker/u:1]
  215. 62 root 0 SW [sync_supers]
  216. 64 root 0 SW [bdi-default]
  217. 66 root 0 SW< [kblockd]
  218. 95 root 0 SW [kswapd0]
  219. 143 root 0 SW [fsnotify_mark]
  220. 173 root 0 SW< [ath79-spi]
  221. 184 root 0 SW [mtdblock0]
  222. 189 root 0 SW [mtdblock1]
  223. 194 root 0 SW [mtdblock2]
  224. 199 root 0 SW [mtdblock3]
  225. 204 root 0 SW [mtdblock4]
  226. 209 root 0 SW [mtdblock5]
  227. 250 root 0 SW [kworker/0:1]
  228. 445 root 0 SWN [jffs2_gcd_mtd3]
  229. 447 root 0 SW [flush-mtd-unmap]
  230. 462 root 1536 S {rcS} /bin/sh /etc/init.d/rcS S boot
  231. 463 root 1500 S /bin/ash --login
  232. 464 root 1540 S {rcS} /bin/sh /etc/init.d/rcS S boot
  233. 465 root 1496 S logger -s -p 6 -t sysinit
  234. 494 root 0 SW< [cfg80211]
  235. 503 root 0 SW [khubd]
  236. 571 root 1508 S /sbin/syslogd -l 8 -C16
  237. 573 root 1492 S /sbin/klogd
  238. 575 root 852 S /sbin/hotplug2 --override --persistent --set-rules-f
  239. 581 root 872 S /sbin/ubusd
  240. 587 root 1540 S /sbin/netifd
  241. 615 root 0 SW [kworker/0:2]
  242. 654 root 1508 S udhcpc -p /var/run/udhcpc-eth0.pid -s /lib/netifd/dh
  243. 671 root 1620 S /usr/sbin/pppd nodetach ipparam wan ifname pppoe-wan
  244. 698 root 1500 S /sbin/watchdog -t 5 /dev/watchdog
  245. 1131 root 1424 S hostapd -P /var/run/wifi-phy0.pid -B /var/run/hostap
  246. 1523 root 1152 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 802
  247. 1541 root 1132 S /usr/sbin/uhttpd -f -h /www -r OpenWrt -x /cgi-bin -
  248. 1545 root 1608 S {S60dnsmasq} /bin/sh /etc/rc.common /etc/rc.d/S60dns
  249. 1549 root 0 DW [jshn]
  250. 1550 root 1496 R ps
  251. root@OpenWrt:/#
  252. root@OpenWrt:/# ps
  253. PID USER VSZ STAT COMMAND
  254. 1 root 1504 S init
  255. 2 root 0 SW [kthreadd]
  256. 3 root 0 SW [ksoftirqd/0]
  257. 4 root 0 SW [kworker/0:0]
  258. 5 root 0 SW [kworker/u:0]
  259. 6 root 0 SW< [khelper]
  260. 7 root 0 SW [kworker/u:1]
  261. 62 root 0 SW [sync_supers]
  262. 64 root 0 SW [bdi-default]
  263. 66 root 0 SW< [kblockd]
  264. 95 root 0 SW [kswapd0]
  265. 143 root 0 SW [fsnotify_mark]
  266. 173 root 0 SW< [ath79-spi]
  267. 184 root 0 SW [mtdblock0]
  268. 189 root 0 SW [mtdblock1]
  269. 194 root 0 SW [mtdblock2]
  270. 199 root 0 SW [mtdblock3]
  271. 204 root 0 SW [mtdblock4]
  272. 209 root 0 SW [mtdblock5]
  273. 250 root 0 SW [kworker/0:1]
  274. 445 root 0 SWN [jffs2_gcd_mtd3]
  275. 447 root 0 SW [flush-mtd-unmap]
  276. 462 root 1536 S {rcS} /bin/sh /etc/init.d/rcS S boot
  277. 463 root 1500 S /bin/ash --login
  278. 464 root 1540 S {rcS} /bin/sh /etc/init.d/rcS S boot
  279. 465 root 1496 S logger -s -p 6 -t sysinit
  280. 494 root 0 SW< [cfg80211]
  281. 503 root 0 SW [khubd]
  282. 571 root 1508 S /sbin/syslogd -l 8 -C16
  283. 573 root 1492 S /sbin/klogd
  284. 575 root 852 S /sbin/hotplug2 --override --persistent --set-rules-f
  285. 581 root 872 S /sbin/ubusd
  286. 587 root 1540 S /sbin/netifd
  287. 615 root 0 SW [kworker/0:2]
  288. 654 root 1508 S udhcpc -p /var/run/udhcpc-eth0.pid -s /lib/netifd/dh
  289. 671 root 1620 S /usr/sbin/pppd nodetach ipparam wan ifname pppoe-wan
  290. 698 root 1500 S /sbin/watchdog -t 5 /dev/watchdog
  291. 1131 root 1424 S hostapd -P /var/run/wifi-phy0.pid -B /var/run/hostap
  292. 1523 root 1152 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 802
  293. 1541 root 1132 S /usr/sbin/uhttpd -f -h /www -r OpenWrt -x /cgi-bin -
  294. 1545 root 1608 S {S60dnsmasq} /bin/sh /etc/rc.common /etc/rc.d/S60dns
  295. 1549 root 0 DW [jshn]
  296. 1551 root 1496 R ps
  297. root@OpenWrt:/# js
  298. root@OpenWrt:/# jshn --help
  299. jshn: invalid option -- -
  300. Usage: jshn [-n] -r <message>|-w
  301. root@OpenWrt:/#
  302. root@OpenWrt:/# jshn --help
  303. root@OpenWrt:/# 
  304. root@OpenWrt:/# [ 107.050000] device wlan0 left promiscuous mode
  305. [ 107.050000] br-lan: port 2(wlan0) entered disabled state
  306. [ 108.440000] device wlan0 entered promiscuous mode
  307. [ 108.520000] br-lan: port 2(wlan0) entered forwarding state
  308. [ 108.530000] br-lan: port 2(wlan0) entered forwarding state
  309. [ 110.530000] br-lan: port 2(wlan0) entered forwarding state
  310. [ 177.040000] CPU 0 Unable to handle kernel paging request at virtual address 000004b2, epc == 80168b78, ra == 8026e428
  311. [ 177.050000] Oops[#2]:
  312. [ 177.050000] Cpu 0
  313. [ 177.050000] $ 0 : 00000000 00000001 000000db 00000080
  314. [ 177.050000] $ 4 : 81b4bc1a 000004b2 00000008 00000001
  315. [ 177.050000] $ 8 : 8034e160 00000000 00000000 8000f81a
  316. [ 177.050000] $12 : 0000000e 00000007 802957d0 80f95e90
  317. [ 177.050000] $16 : 81b4bbf8 80db6380 00000100 80350000
  318. [ 177.050000] $20 : 802e0000 802a30e0 802a3120 80350000
  319. [ 177.050000] $24 : 00000000 8006a0c0
  320. [ 177.050000] $28 : 80f94000 80f95e48 802e45f0 8026e428
  321. [ 177.050000] Hi : 00000000
  322. [ 177.050000] Lo : 028f5baf
  323. [ 177.050000] epc : 80168b78 0x80168b78
  324. [ 177.050000] Tainted: G D O
  325. [ 177.050000] ra : 8026e428 0x8026e428
  326. [ 177.050000] Status: 1100f403 KERNEL EXL IE
  327. [ 177.050000] Cause : 00800008
  328. [ 177.050000] BadVA : 000004b2
  329. [ 177.050000] PrId : 0001974c (MIPS 74Kc)
  330. [ 177.050000] Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  331. [ 177.050000] Process luci (pid: 2856, threadinfo=80f94000, task=80f22db8, tls=77b80440)
  332. [ 177.050000] Stack : 000000b1 02625f1b 00000003 000000b1 02625f1b 80db6380 802700a0 802700c8
  333. [ 177.050000] 802e5214 00000000 00000063 8034e160 8034e160 8007c52c 00000007 802e5214
  334. [ 177.050000] 00000001 00000001 00014600 80350000 81b90244 81b90244 8034e008 00000001
  335. [ 177.050000] 00000001 00000100 0000000a 00000004 80350000 80077038 00c7c438 77b39000
  336. [ 177.050000] 00000063 00c7c5e0 00c59860 77b525c0 00000000 00000104 00c7c438 77b39000
  337. [ 177.050000] ...
  338. [ 177.050000] Call Trace:[<802700a0>] 0x802700a0
  339. [ 177.050000] [<802700c8>] 0x802700c8
  340. [ 177.050000] [<8007c52c>] 0x8007c52c
  341. [ 177.050000] [<80077038>] 0x80077038
  342. [ 177.050000] [<80077248>] 0x80077248
  343. [ 177.050000] [<800c7b6c>] 0x800c7b6c
  344. [ 177.050000] [<8007747c>] 0x8007747c
  345. [ 177.050000] [<800630ec>] 0x800630ec
  346. [ 177.050000]
  347. [ 177.050000]
  348. [ 177.050000] Code: 00000000 0805a2e4 00000000 <90a20000> 00621023 14400006 24840001 24a50001 24c6ffff
  349. [ 177.280000] ---[ end trace 025715181450a20e ]---
  350. [ 177.290000] Kernel panic - not syncing: Fatal exception in interrupt
  351. [ 178.540000] Reserved instruction in kernel code[#3]:
  352. [ 178.540000] Cpu 0
  353. [ 178.540000] $ 0 : 00000000 00000001 8000dc8c 8162fa48
  354. [ 178.540000] $ 4 : 8162fa48 00000000 80f15eb8 00000000
  355. [ 178.540000] $ 8 : 1100f400 1000001f 00000001 00000000
  356. [ 178.540000] $12 : 00000000 00000000 802957d0 3d3d3d3d
  357. [ 178.540000] $16 : 8162fa48 802e4340 802e0000 7fffffff
  358. [ 178.540000] $20 : ffffffff 000000b2 208236e5 000000b2
  359. [ 178.540000] $24 : 00000018 80198f30
  360. [ 178.540000] $28 : 80f94000 80f95aa0 00000000 8008e1cc
  361. [ 178.540000] Hi : 001946c8
  362. [ 178.540000] Lo : 7aba5872
  363. [ 178.540000] epc : 8000dc8c 0x8000dc8c
  364. [ 178.540000] Tainted: G D O
  365. [ 178.540000] ra : 8008e1cc 0x8008e1cc
  366. [ 178.540000] Status: 11007402 KERNEL EXL
  367. [ 178.540000] Cause : 00800028
  368. [ 178.540000] PrId : 0001974c (MIPS 74Kc)
  369. [ 178.540000] Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  370. [ 178.540000] Process luci (pid: 2856, threadinfo=80f94000, task=80f22db8, tls=77b80440)
  371. [ 178.540000] Stack : 802e0000 00000000 00000034 00000000 80350000 802e4370 208236e5 8008eb10
  372. [ 178.540000] 80f95bef 80166c6c 8034db64 0000003a 80352a90 0000000a 000000b2 208236e5
  373. [ 178.540000] 00000003 000000b2 208236e5 80c24000 802e2880 00000007 802e5214 00000000
  374. [ 178.540000] 00000034 00000000 80350000 802a4a88 802a4a9c 80068f48 00000001 00000001
  375. [ 178.540000] 00014600 80350000 802a4a88 800a4128 80f95bd8 80f95bef ffffffff 80f95be8
  376. [ 178.540000] ...
  377. [ 178.540000] Call Trace:[<8008eb10>] 0x8008eb10
  378. [ 178.540000] [<80166c6c>] 0x80166c6c
  379. [ 178.540000] [<80068f48>] 0x80068f48
  380. [ 178.540000] [<800a4128>] 0x800a4128
  381. [ 178.540000] [<800a705c>] 0x800a705c
  382. [ 178.540000] [<800a3a0c>] 0x800a3a0c
  383. [ 178.540000] [<80064ac8>] 0x80064ac8
  384. [ 178.540000] [<800630ec>] 0x800630ec
  385. [ 178.540000] [<80096b70>] 0x80096b70
  386. [ 178.540000] [<80198f30>] 0x80198f30
  387. [ 178.540000] [<8028431c>] 0x8028431c
  388. [ 178.540000] [<80168b20>] 0x80168b20
  389. [ 178.540000] [<800679c4>] 0x800679c4
  390. [ 178.540000] [<8006c0ec>] 0x8006c0ec
  391. [ 178.540000] [<80168b78>] 0x80168b78
  392. [ 178.540000] [<8026e428>] 0x8026e428
  393. [ 178.540000] [<80c59e24>] 0x80c59e24
  394. [ 178.540000] [<80215280>] 0x80215280
  395. [ 178.540000] [<80c5a598>] 0x80c5a598
  396. [ 178.540000] [<800976d8>] 0x800976d8
  397. [ 178.540000] [<800630e0>] 0x800630e0
  398. [ 178.540000] [<8007c660>] 0x8007c660
  399. [ 178.540000] [<8006a0c0>] 0x8006a0c0
  400. [ 178.540000] [<8026e428>] 0x8026e428
  401. [ 178.540000] [<80168b78>] 0x80168b78
  402. [ 178.540000] [<802700a0>] 0x802700a0
  403. [ 178.540000] [<802700c8>] 0x802700c8
  404. [ 178.540000] [<8007c52c>] 0x8007c52c
  405. [ 178.540000] [<80077038>] 0x80077038
  406. [ 178.540000] [<80077248>] 0x80077248
  407. [ 178.540000] [<800c7b6c>] 0x800c7b6c
  408. [ 178.540000] [<8007747c>] 0x8007747c
  409. [ 178.540000] [<800630ec>] 0x800630ec
  410. [ 178.540000]
  411. [ 178.540000]
  412. [ 178.540000] Code: ffffffff ffffffff ffffffff <ffffffff> ffff
  413. Note: at this point the router is hangs.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement