Advertisement
kamalj

/dev/da0

May 17th, 2015
324
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.69 KB | None | 0 0
  1. smartctl -a /dev/da0
  2. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: HGST Deskstar NAS
  7. Device Model: HGST HDN724040ALE640
  8. Serial Number: PKxxxxxxxxx39B
  9. LU WWN Device Id: 5 000cca 24cd0ff2d
  10. Firmware Version: MJAOA5E0
  11. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS T13/1699-D revision 4
  17. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Sun May 17 12:51:09 2015 EDT
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 24) seconds.
  34. Offline data collection
  35. capabilities: (0x5b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. No Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 563) minutes.
  52. SCT capabilities: (0x003d) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  61. 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 81
  62. 3 Spin_Up_Time 0x0007 179 179 024 Pre-fail Always - 457 (Average 408)
  63. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 26
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  65. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  66. 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
  67. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4639
  68. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
  70. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 216
  71. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 216
  72. 194 Temperature_Celsius 0x0002 181 181 000 Old_age Always - 33 (Min/Max 21/37)
  73. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  74. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 73
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 73 (device log contains only the most recent five errors)
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 73 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours)
  95. When the command that caused the error occurred, the device was active or idle.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 84 51 d1 5f 4f 21 03 Error: ICRC, ABRT at LBA = 0x03214f5f = 52514655
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. 60 00 08 30 50 21 40 00 1d+16:28:50.674 READ FPDMA QUEUED
  106. 60 00 00 30 4f 21 40 00 1d+16:28:50.673 READ FPDMA QUEUED
  107. 60 00 08 30 4e 21 40 00 1d+16:28:50.672 READ FPDMA QUEUED
  108. 60 00 00 30 4d 21 40 00 1d+16:28:50.671 READ FPDMA QUEUED
  109. 60 00 08 30 4c 21 40 00 1d+16:28:50.670 READ FPDMA QUEUED
  110.  
  111. Error 72 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
  112. When the command that caused the error occurred, the device was active or idle.
  113.  
  114. After command completion occurred, registers were:
  115. ER ST SC SN CL CH DH
  116. -- -- -- -- -- -- --
  117. 84 51 51 6f 7c 92 0e Error: ICRC, ABRT at LBA = 0x0e927c6f = 244481135
  118.  
  119. Commands leading to the command that caused the error were:
  120. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  121. -- -- -- -- -- -- -- -- ---------------- --------------------
  122. 60 80 00 c0 7c 92 40 00 1d+16:04:26.400 READ FPDMA QUEUED
  123. 60 00 08 c0 7b 92 40 00 1d+16:04:26.399 READ FPDMA QUEUED
  124. 60 00 00 c0 7a 92 40 00 1d+16:04:26.398 READ FPDMA QUEUED
  125. 60 00 08 c0 79 92 40 00 1d+16:04:26.397 READ FPDMA QUEUED
  126. 60 80 00 20 79 92 40 00 1d+16:04:26.394 READ FPDMA QUEUED
  127.  
  128. Error 71 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
  129. When the command that caused the error occurred, the device was active or idle.
  130.  
  131. After command completion occurred, registers were:
  132. ER ST SC SN CL CH DH
  133. -- -- -- -- -- -- --
  134. 84 51 61 cf e4 93 01 Error: ICRC, ABRT at LBA = 0x0193e4cf = 26469583
  135.  
  136. Commands leading to the command that caused the error were:
  137. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  138. -- -- -- -- -- -- -- -- ---------------- --------------------
  139. 60 00 00 30 e4 93 40 00 1d+15:20:17.226 READ FPDMA QUEUED
  140. 60 00 00 30 e3 93 40 00 1d+15:20:17.225 READ FPDMA QUEUED
  141. 60 00 00 30 e2 93 40 00 1d+15:20:17.225 READ FPDMA QUEUED
  142. 60 00 00 30 e1 93 40 00 1d+15:20:17.224 READ FPDMA QUEUED
  143. 60 00 00 30 e0 93 40 00 1d+15:20:17.223 READ FPDMA QUEUED
  144.  
  145. Error 70 occurred at disk power-on lifetime: 3961 hours (165 days + 1 hours)
  146. When the command that caused the error occurred, the device was active or idle.
  147.  
  148. After command completion occurred, registers were:
  149. ER ST SC SN CL CH DH
  150. -- -- -- -- -- -- --
  151. 84 51 a1 3f 35 d4 09 Error: ICRC, ABRT at LBA = 0x09d4353f = 164902207
  152.  
  153. Commands leading to the command that caused the error were:
  154. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  155. -- -- -- -- -- -- -- -- ---------------- --------------------
  156. 60 00 00 e0 35 d4 40 00 1d+13:49:22.756 READ FPDMA QUEUED
  157. 60 00 08 e0 34 d4 40 00 1d+13:49:22.755 READ FPDMA QUEUED
  158. 60 00 00 e0 33 d4 40 00 1d+13:49:22.754 READ FPDMA QUEUED
  159. 60 00 08 e0 32 d4 40 00 1d+13:49:22.753 READ FPDMA QUEUED
  160. 60 00 00 e0 31 d4 40 00 1d+13:49:22.753 READ FPDMA QUEUED
  161.  
  162. Error 69 occurred at disk power-on lifetime: 3960 hours (165 days + 0 hours)
  163. When the command that caused the error occurred, the device was active or idle.
  164.  
  165. After command completion occurred, registers were:
  166. ER ST SC SN CL CH DH
  167. -- -- -- -- -- -- --
  168. 84 51 d1 8f 8e 82 08 Error: ICRC, ABRT at LBA = 0x08828e8f = 142773903
  169.  
  170. Commands leading to the command that caused the error were:
  171. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  172. -- -- -- -- -- -- -- -- ---------------- --------------------
  173. 60 00 08 60 8f 82 40 00 1d+13:01:09.547 READ FPDMA QUEUED
  174. 60 00 00 60 8e 82 40 00 1d+13:01:09.546 READ FPDMA QUEUED
  175. 60 f0 08 70 8d 82 40 00 1d+13:01:09.546 READ FPDMA QUEUED
  176. 60 f0 00 80 8c 82 40 00 1d+13:01:09.545 READ FPDMA QUEUED
  177. 60 00 08 80 8b 82 40 00 1d+13:01:09.544 READ FPDMA QUEUED
  178.  
  179. SMART Self-test log structure revision number 1
  180. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  181. # 1 Extended offline Completed without error 00% 1126 -
  182. # 2 Short offline Completed without error 00% 1115 -
  183. # 3 Extended offline Completed without error 00% 1005 -
  184. # 4 Short offline Completed without error 00% 995 -
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
  196.  
  197. [root@freenas] ~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement