<4>[   66.055731] c0 s3c-fimc0: FIMC0 1 opened.
<7>[   66.056478] c0 s5c73m3_probe
<7>[   66.056902] c0 s5c73m3_power_on: in
<7>[   66.056921] c0 s5c73m3 vddCore : 1100000
<7>[   66.058926] c0 system_rev : 11
<4>[   66.068532] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[   66.068589] c0 s5c73m3_init: vdd core value from OTP : 1.10V
<7>[   66.068639] c0 s5c73m3_init: chip info from OTP : 0x5e00, 0x6f03, 0xa255
<7>[   66.095802] c0 s5c73m3_get_sensor_fw_version: Sensor_version = ZKFI07, Sensor_Type = CML0801-M0
<7>[   66.102297] c0 s5c73m3_get_af_cal_version: Cal_Device = 0xc1018f0, Cal_DLL = 0xb512f97c
<7>[   66.102506] c0 s5c73m3_open_firmware_file: /data/cfw/SlimISP_ZK.bin is opened
<7>[   66.102598] c0 s5c73m3_compare_date: date1 = FI03, date2 = FI03
<7>[   66.102644] c0 , compare result = 0
<7>[   66.102680] c0 s5c73m3_get_phone_fw_version: Phone_version = ZKFI03(index=2)
<7>[   66.102751] c0 s5c73m3_check_fw_date: Sensor_date = FI07, Phone_date = FI03
<7>[   66.102795] c0 , compare result = 1
<7>[   66.102826] c0 s5c73m3_check_fw: Loading From SensorFW......
<7>[   66.102869] c0 s5c73m3_power_down: in
<4>[   66.144419] c3 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[   66.144909] c3 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[   66.144942] c3 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[   66.144980] c3 s5c73m3_power_on: in
<7>[   66.145000] c3 s5c73m3 vddCore : 1100000
<7>[   66.146282] c3 system_rev : 11
<4>[   66.156441] c3 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<3>[   66.161280] c0 s5c73m3_get_sensor_fw_binary: FW loaded: /data/cfw/SlimISP_ZK.bin
<7>[   66.606699] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[   66.618712] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1      CS-20000f FTC-2000
<3>[   66.618771] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[   66.685112] c0 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[   66.685232] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[   66.685859] c0 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[   66.685919] c0 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[   66.685978] c0 s5c73m3_check_fw: i2c failed, err -22
<7>[   66.686033] c0 s5c73m3_init: isp.bad_fw is true
<3>[   66.686215] c0 s5c73m3_init: i2c failed, err -22