Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- USB_ModeSwitch log from Sun Apr 1 17:02:11 2012
- Using global config file: /etc/usb_modeswitch.conf
- Raw args from udev: /2-5:1.0
- Bus ID for device not given by udev.
- Trying to determine it from kernel name (2-5:1.0) ...
- USB dir exists: /sys/bus/usb/devices/2-5
- Warning: USB attribute "serial" not readable.
- SCSI dir exists: /sys/bus/usb/devices/2-5
- Warning: SCSI attribute "vendor" not readable.
- Warning: SCSI attribute "model" not readable.
- Warning: SCSI attribute "rev" not readable.
- ----------------
- USB values from sysfs:
- idVendor 12d1
- idProduct 14fe
- manufacturer HUAWEI
- product HUAWEI Mobile
- serial (null)
- bNumConfigurations 1
- ----------------
- bNumConfigurations is 1 - don't check for active configuration
- Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz
- Searching entries named: /usr/share/usb_modeswitch/12d1:14fe*
- Searching overriding entries named: /etc/usb_modeswitch.d/12d1:14fe*
- SCSI attributes not needed, moving on.
- Extracting config 12d1:14fe from collection /usr/share/usb_modeswitch/configPack.tar.gz
- ! matched, now switching
- (running command: /usr/sbin/usb_modeswitch -I -W -D -c /var/lib/usb_modeswitch/current_cfg -u -1 2>&1)
- Verbose debug output of usb_modeswitch and libusb follows
- (Note that some USB errors are expected in the process)
- --------------------------------
- Reading config file: /var/lib/usb_modeswitch/current_cfg
- * usb_modeswitch: handle USB devices with multiple modes
- * Version 1.1.9 (C) Josua Dietze 2011
- * Based on libusb0 (0.1.12 and above)
- ! PLEASE REPORT NEW CONFIGURATIONS !
- DefaultVendor= 0x12d1
- DefaultProduct= 0x14fe
- TargetVendor= 0x12d1
- TargetProduct= 0x1506
- TargetClass= not set
- TargetProductList=""
- DetachStorageOnly=0
- HuaweiMode=0
- SierraMode=0
- SonyMode=0
- GCTMode=0
- KobilMode=0
- SequansMode=0
- MobileActionMode=0
- CiscoMode=0
- MessageEndpoint= not set
- MessageContent="55534243123456780000000000000011062000000100000000000000000000"
- NeedResponse=0
- ResponseEndpoint= not set
- Interface=0x00
- InquireDevice disabled
- Success check enabled, max. wait time 20 seconds
- System integration mode enabled
- Looking for target devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 12d1:14fe
- found matching vendor ID
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- No devices in target mode or class found
- Looking for default devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 12d1:14fe
- found matching vendor ID
- found matching product ID
- adding device
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- Found devices in default mode, class or configuration (1)
- Accessing device 007 on bus 002 ...
- Skipping the check for the current configuration
- Using endpoints 0x01 (out) and 0x81 (in)
- USB description data (for identification)
- -------------------------
- Manufacturer: HUAWEI
- Product: HUAWEI Mobile
- Serial No.: not provided
- -------------------------
- Looking for active driver ...
- OK, driver found ("usb-storage")
- OK, driver "usb-storage" detached
- Setting up communication with interface 0
- Using endpoint 0x01 for message sending ...
- Trying to send message 1 to endpoint 0x01 ...
- OK, message successfully sent
- Resetting response endpoint 0x81
- Could not reset endpoint (probably harmless): -71
- Resetting message endpoint 0x01
- Could not reset endpoint (probably harmless): -19
- Device is gone, skipping any further commands
- Checking for mode switch (max. 20 times, once per second) ...
- Searching for target devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- Searching for target devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- Searching for target devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- Searching for target devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- Searching for target devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- Searching for target devices ...
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1bcf:0007
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 1d6b:0001
- searching devices, found USB ID 12d1:1506
- found matching vendor ID
- found matching product ID
- adding device
- searching devices, found USB ID 1d6b:0002
- searching devices, found USB ID 1d6b:0002
- Found target device, now opening
- Found target device 008 on bus 002
- Target device description data
- -------------------------
- Manufacturer: HUAWEI
- Product: HUAWEI Mobile
- Serial No.: not provided
- -------------------------
- Found correct target device
- Mode switch succeeded. Bye.
- ok:12d1:1506
- --------------------------------
- (end of usb_modeswitch output)
- USB dir exists: /sys/bus/usb/devices/2-5
- Warning: USB attribute "serial" not readable.
- Driver module is "option", ID PATH is /sys/bus/usb-serial/drivers/option1
- Now checking for newly created serial devices ...
- no new serial devices found
- Device not in bind_list
- Driver was loaded already
- Trying to add ID to driver "option"
- ID added to driver; check for new devices in /dev
- still no new serial devices found
- Checking for AVOID_RESET_QUIRK attribute
- AVOID_RESET_QUIRK activated
- All done, exiting
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement