Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.12.0-rc6-00151-g7a3fa45 (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 SMP Wed Oct 30 09:14:30 CDT 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] cma: CMA: reserved 16 MiB at 9e800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] CPU: All CPU(s) started in SVC mode.
- [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c11c7000 s14016 r8192 d14656 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=none camera=none vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 488204K/523264K available (5383K kernel code, 648K rwdata, 2068K rodata, 409K init, 5522K bss, 35060K reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc074f100 (7453 kB)
- [ 0.000000] .init : 0xc0750000 - 0xc07b66c0 ( 410 kB)
- [ 0.000000] .data : 0xc07b8000 - 0xc085a3a8 ( 649 kB)
- [ 0.000000] .bss : 0xc085a3a8 - 0xc0dbee68 (5523 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
- [ 0.000000] OMAP clockevent source: timer12 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.000000] ... MAX_LOCK_DEPTH: 48
- [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.000000] ... CLASSHASH_SIZE: 4096
- [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
- [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
- [ 0.000000] ... CHAINHASH_SIZE: 16384
- [ 0.000000] memory used by lock dependency info: 3695 kB
- [ 0.000000] per task-struct memory footprint: 1152 bytes
- [ 0.001281] Calibrating delay loop... 324.40 BogoMIPS (lpj=1622016)
- [ 0.098175] pid_max: default: 32768 minimum: 301
- [ 0.098724] Security Framework initialized
- [ 0.098907] Mount-cache hash table entries: 512
- [ 0.102996] CPU: Testing write buffer coherency: ok
- [ 0.104553] missing device node for CPU 0
- [ 0.104583] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.104644] Setting up static identity map for 0xc051a538 - 0xc051a5a8
- [ 0.108428] Brought up 1 CPUs
- [ 0.108459] SMP: Total of 1 processors activated.
- [ 0.108459] CPU: All CPU(s) started in SVC mode.
- [ 0.111968] devtmpfs: initialized
- [ 0.122131] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 0.124114] omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
- [ 0.124176] omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
- [ 0.184173] pinctrl core: initialized pinctrl subsystem
- [ 0.189331] regulator-dummy: no parameters
- [ 0.193237] NET: Registered protocol family 16
- [ 0.201538] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.203796] omap-gpmc omap-gpmc: GPMC revision 5.0
- [ 0.217132] OMAP GPIO hardware version 2.5
- [ 0.238342] omap_mux_init: Add partition: #1: core, flags: 4
- [ 0.241210] OMAP3 Beagle Rev: xM C
- [ 0.255889] omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
- [ 0.264434] Reprogramming SDRC clock to 400000000 Hz
- [ 0.267578] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.287445] omap-mcbsp.2: alias fck already exists
- [ 0.288299] omap-mcbsp.3: alias fck already exists
- [ 0.292999] OMAP DMA hardware revision 5.0
- [ 0.296997] arm-pmu: alias fck already exists
- [ 0.374694] bio: create slab <bio-0> at 0
- [ 0.379211] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
- [ 0.379302] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
- [ 0.471832] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
- [ 0.480590] SCSI subsystem initialized
- [ 0.483398] usbcore: registered new interface driver usbfs
- [ 0.483978] usbcore: registered new interface driver hub
- [ 0.484924] usbcore: registered new device driver usb
- [ 0.491607] omap_i2c omap_i2c.1: bus 1 rev4.4 at 2600 kHz
- [ 0.493835] omap_i2c omap_i2c.3: bus 3 rev4.4 at 100 kHz
- [ 0.504364] Switched to clocksource 32k_counter
- [ 0.692199] NET: Registered protocol family 2
- [ 0.694763] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.695098] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
- [ 0.697357] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.697570] TCP: reno registered
- [ 0.697601] UDP hash table entries: 256 (order: 2, 20480 bytes)
- [ 0.697906] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
- [ 0.699645] NET: Registered protocol family 1
- [ 0.701965] RPC: Registered named UNIX socket transport module.
- [ 0.701995] RPC: Registered udp transport module.
- [ 0.701995] RPC: Registered tcp transport module.
- [ 0.702026] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.703277] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 0.703613] CPU PMU: probing PMU on CPU 0
- [ 0.703643] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.929168] VFS: Disk quotas dquot_6.5.2
- [ 0.929504] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.932525] NFS: Registering the id_resolver key type
- [ 0.933135] Key type id_resolver registered
- [ 0.933166] Key type id_legacy registered
- [ 0.933319] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.933929] msgmni has been set to 985
- [ 0.938659] io scheduler noop registered
- [ 0.938690] io scheduler deadline registered
- [ 0.938812] io scheduler cfq registered (default)
- [ 0.943756] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.953277] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
- [ 0.956390] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
- [ 0.958312] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
- [ 1.660980] console [ttyO2] enabled
- [ 1.666992] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
- [ 1.715423] brd: module loaded
- [ 1.742706] loop: module loaded
- [ 1.759155] twl 1-0048: PIH (irq 23) chaining IRQs 338..346
- [ 1.765747] twl 1-0048: power (irq 343) chaining IRQs 346..353
- [ 1.775360] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371
- [ 1.790222] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral
- [ 1.801971] hsusb2_reset: 3300 mV
- [ 1.809509] hsusb2_vcc: 3300 mV
- [ 1.818847] vdd_mpu_iva: 600 <--> 1450 mV normal
- [ 1.826263] vdd_core: 600 <--> 1450 mV normal
- [ 1.833618] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
- [ 1.842559] VDAC: 1800 mV normal standby
- [ 1.849426] VDVI: 1800 mV normal standby
- [ 1.856719] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
- [ 1.872772] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 1.880615] Trying ONFI probe in 16 bits mode, aborting !
- [ 1.886413] No NAND device found
- [ 1.889984] No NAND device found
- [ 1.909851] usbcore: registered new interface driver asix
- [ 1.916656] usbcore: registered new interface driver ax88179_178a
- [ 1.923645] usbcore: registered new interface driver cdc_ether
- [ 1.930755] usbcore: registered new interface driver r815x
- [ 1.937408] usbcore: registered new interface driver smsc95xx
- [ 1.944000] usbcore: registered new interface driver net1080
- [ 1.951721] usbcore: registered new interface driver cdc_subset
- [ 1.958709] usbcore: registered new interface driver zaurus
- [ 1.965545] usbcore: registered new interface driver cdc_ncm
- [ 1.973999] usbcore: registered new interface driver cdc_wdm
- [ 1.980743] usbcore: registered new interface driver usb-storage
- [ 1.987823] usbcore: registered new interface driver usbtest
- [ 1.996429] mousedev: PS/2 mouse device common for all mice
- [ 2.008819] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-004b/twl4030_pwrbutton/input/input0
- [ 2.025054] twl_rtc twl_rtc: Power up reset detected.
- [ 2.030548] twl_rtc twl_rtc: Enabling TWL-RTC
- [ 2.039978] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 2.048065] i2c /dev entries driver
- [ 2.055816] Driver for 1-wire Dallas network protocol.
- [ 2.067443] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 2.081451] omap-dma-engine omap-dma-engine: allocating channel for 62
- [ 2.088623] omap-dma-engine omap-dma-engine: allocating channel for 61
- [ 2.476135] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.487396] usbcore: registered new interface driver usbhid
- [ 2.493286] usbhid: USB HID core driver
- [ 2.499176] oprofile: using arm/armv7
- [ 2.503906] TCP: cubic registered
- [ 2.507598] Initializing XFRM netlink socket
- [ 2.512329] NET: Registered protocol family 17
- [ 2.517211] NET: Registered protocol family 15
- [ 2.522338] Key type dns_resolver registered
- [ 2.540405] ThumbEE CPU extension supported.
- [ 2.550170] VDVI: incomplete constraints, leaving on
- [ 2.556030] VDAC: incomplete constraints, leaving on
- [ 2.568725] input: gpio-keys as /devices/platform/gpio-keys/input/input1
- [ 2.580139] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
- [ 2.593475] Waiting for root device /dev/mmcblk0p2...
- [ 2.606140] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 2.617797] mmc0: new high speed SDHC card at address 1234
- [ 2.626983] mmcblk0: mmc0:1234 SA04G 3.63 GiB
- [ 2.638824] mmcblk0: p1 p2
- [ 7.934722] kjournald starting. Commit interval 5 seconds
- [ 8.671386] EXT3-fs (mmcblk0p2): using internal journal
- [ 8.682403] EXT3-fs (mmcblk0p2): recovery complete
- [ 8.687530] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
- [ 8.695007] VFS: Mounted root (ext3 filesystem) on device 179:2.
- [ 8.707275] devtmpfs: mounted
- [ 8.711364] Freeing unused kernel memory: 408K (c0750000 - c07b6000)
- Mounting proc : OK
- Mounting sysfs : OK
- Mounting devtmpfs:mount: mounting none on /dev failed: Device or resource busy
- boot mounted: OK
- /dev/ttyO2 linked to /dev/tty-bd - using as console
- ******************************************
- Starting System Init for OMAP3BeagleBoard
- Release: X.x
- Kernel: Linux OMAP3BeagleBoard 3.12.0-rc6-00151-g7a3fa45 #5 SMP Wed Oct 30 09:14:30 CDT 2013 armv7l GNU/Linux
- ******************************************
- Saving kernel ring buffer : OK
- Mounting devpts : OK
- Setting up networking
- Configuring lo : OK
- Starting syslogd : OK
- Starting klogd : OK
- Mounting filesystems : OK
- mount: mounting none on /proc/bus/usb/ failed: No such file or directory
- Please press Enter to activate this console.
- / $
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement