dm800 boot problem 28/12-2

[4294669.948000]fault
[4294669.948000] Found NAND: ACC=e3000000, cfg=04042300, flashId=ad76ad76, tim1=
[4294791.240000] sync is off so we enable it
5363444f, tim2=00000fc6244000] playback!
[4294669.960000] BrcmNAND version = 0x0001 64MB @00000000 (0 ms)
[4294
[4294669.965000] Found NAND chip on Chip Select 1, chipSize=64MB, usable size=646000] flush video decoder
[4294791.397000] V
MB, base=14000000x0
[4294669.974000] ACC_CONTROL B4: e3000000IDEO0: set blank to 0
[4294669.977000] page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shi
[4294791.471000] VIDEO0: set blank to 0
ft=14

[4294669.985000] Brcm NAND controller version = 0.1 NAND flash size 64MB @140000
PYTHONPATH: /usr/lib/e
00ma
[4294670.008000] brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevelle manual blit
 - double buffering ava
=15, eccbytes=3
[4294670.017000] brcmnand_default_bbt: bbt_td = bbt_main_descr
resolution: 1280 x 720 x 32 (st
[4294670.024000] brcmnandCET: Status -> Deferred
+ (9) gLCDDC
lcd buffer 0x7f7cc
[4294670.029000]        numchips=1, size=4000000
LCD resolution: 132 x 64 x 8 (
[4294670.033000] Creating 4 MTD partitions on "bcm7xxx-nand.0":t Render Class
[FONT] initializing lib..
[4294670.094000]  - USB h/w setup mode <B>
[42947
[4294670.094000]  - USB power enable set for active LOW modenc
[4294670.104000] brcm-ehci brcm-ehci.0: BRCM EHCI
DVB_API_VERSION
[4294670.109000] brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus numnd File Eraser
+ (5) Tuxtxt
+ (8) graphi
ber 1elera
[4294670.117000] brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300cm_accel: invalid opcode! 00000080
[4294670.123000] brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 De94797.925000] bcmfb: enable manual blit
c 2004uble b
[4294670.132000] usb usb1: configuration #1 chosen from 1 choicee for acceleration surfaces.
[4294670.138000] hub 1-0:1.0: USB hub found 5120)
[FONT] initializ
[4294670.254000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHC
[FONT] Intializing font cache, using max. 4MB...
I-brcm-0)
[4294670.262000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controllerotifiers.end() FAILED

[4294670.269000]  - Resetting at b0480408
[4294799.146000] VIDEO
[4294670.273000] <-- brcm_start_hc
[4294799.153
[4294670.276000] brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
[4294799.158000] playback!
[4294670.282000] brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus
[4294799.183000] VIDEO0: start decode
 number 2
I-brcm-1)ERSION_MI
[4294670.476000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
+ (5) Tuxtxt
+ (8) graphics acceleration mana

[4294670.483000]  - Resetting at b04805084801.762000] bcm_accel: invalid opcode! 0
[4294670.487000] <-- brcm_start_hc
+ (9) GFB
[4294670.490000] brcm-ohci-1 brcm-ohci-1.

LCD resolution: 132 x 64 x 8 (stride: 132)
2
[4294670.573000] usb usb3: configuration #1 chosen from 1 choice
[FONT] initializing lib...
[4294670.579000] hub 3-0:1.0: USB hub found
[FONT] Intializing font cache, using
[4294670.583000] hub 3-0:1.0: 2 ports detected
+ (10) gRC
FATAL: base
[4294670.689000] Initializing USB Mass Storage driver...end() FAILED
[4294670.709000] usb 1-2: configuration #1 chosen from 1 choi
[4294803.037000] VIDEO0
[4294670.748000] ALSA device list:3.294000] no decoder left in sync
[4294670.751000]   No soundcards found.
[4294670.755000] TCP bic registeredlib/enigma2/python
[4294670.759000] NET: Registered protocol family 1N_MINOR 3
+ (9) GFBDC
16384k video mem
[429
30
[4294671.098000] usb 1-1: configuration #1 chosen from 1 choice
 - double buffering available!
[4294672.272000] Sending DHCP requests ., OK surfaces.
[4294672.281000] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.
+ (9) gLCDDC
lcd buffer 0x7f7cc8 8448 bytes, stride 13
168.1.101
[4294672.290000] IP-Config: Complete:n: 132 x 64 x 8 (stride: 132)
[4294672.293000]       device=eth0, addr=192.168.1.101, mask=255.255.255.0, gw=1
[FONT] initializing lib...
[FONT] loading fonts...
92.168.1.1,
[F
[4294672.301000]      host=192.168.1.101, domain=, n

DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
[4294681.676000] sdb: Write Protect is offround File Eraser
[4294681.680000] sdb: assuming drive cache: write throughanager
[4294809.510000
[4294681.685000]  sdb: sdb1 00000080
[4294681.701000] sd 1:0:0:0: Attached scsi removable disk sdb4k video mem
[4294809.638000] bcmfb: enable m
[4294681.707000] sd 1:0:0:0: Attached scsi generic sg1 type 0 buffering available!
9184kB av
open-multiboot - debug: mount /proc
open-multiboot - debug: mount /sys(stride: 5120)
open-multiboot - debug: mount /media
lcd buffer 0x7f7cc8 8448
open-multiboot - debug:
+ (10) gRC
FA
 recommendedse.cpp:155 A
[4294685.301000] EXT3 FS on sdb1, internal journalED
[4294685.305000] EXT3-fs: mounted filesystem with ordered data mode.
[4294810.799000] VIDEO0: set blank to 0
[4294688.321000] kjournald starting.  Commit interval 5 seconds
[4294810.815000] playba
[4294688.327000] EXT3-fs warning: mounting fs with errors, running e2fsck is rec
[4294810.832000] VIDEO0: start decode
ommended
[4294688.336000] EXT3 FS on sda1, internal journalr

Traceback (most recent call last):ERSION_MINOR 3
  File "/sbin/open-multiboot-branding-helper.py", line 61, in <module>
+ (5) Tuxtxt
+ (8) graphics acceleration manager
    import boxbranding
[4294813.40
ImportError: No module named boxbranding
Traceback (most recent call last):
16384k video mem

  File "/sbin/open-multiboot-branding-helper.py", line

+ (10) gRC
FATAL: base/ebase.cpp:155 ASSERTION
bcm7401 [4294706.592000] enter base init, xvd 20090807, vdc 20080313, rap 200904
!
Segmentation fault
30, xpt 20080313000] VIDEO0: set
[4294706.600000] kernMemSize : 148 MB
[4294814.703000] sync is
[4294814
[4294709.160000] set sb to 3(2)
[4294709.163000] set fb to 2(-1)er left in sync handling so disa
[4294709.166000] set input to 0
[4294709.169000] set fb to 2(-1)sr/lib/enigma2/python
[4294709.174000] bcm_video_analog_port_setup (fmt=6)RSION_MINOR 3
[4294709.179000] SET FORMAT: display[1], format=6
+ (5) Tuxtxt
+ (8) graphics
[4294709.192000] HDMI: now connected
[4294709.230000] HDMI: EDID read ok
9184kB
[4294709.234000] HDMI: initial mode set!

[4294709.237000] using 50.00Hz as MonitorRefreshRate
+ (9) gLCDDC
[4294709.242000] SET FORMAT: display[0], format=24
LCD resolut
[4294709.247000] HDMI mode132)
[4294709.249000] use EDID to detect colorspace
[FONT] initializing lib..
[4294709.254000] using colorspace: 1ading fonts...
[4294709.333000] set fb to 2(0) using max. 4MB...
[4294709.336000] bcm_video_analog_port_setup (fmt=6)
FATAL: base/ebase.cpp:155 ASSERTION notifie
[4294709.583000] enable madng Avahi mDNS/DNS-SD Daemon
[4294709.659000] VIDEO0: set fallback framerate to 60000
   ...done.
udhcpc (v1.19.4) started
[4294709.664000] VIDEO0: set progressive override mode to 1
Sending select for 192.168.1.101...
[4294709.669000] VIDEO0: set streamtype!ained, lease time 172800
[4294709.673000] set MPEG2
ip: RTNETLINK answ
[4294709.676000] sw rave disabled!
/etc/udhcpc.d/50de
[4294709.685000] sync is off so we enable it

[4294710.443000] init ALSA!
ifdown: interfa
[4294710.618000] VIDEO0: first pts 0x0
done.
stoppe
[4294710.638000] DVB: registering new adapter (BCM7401)
Sending all processes the TERM signal...
[4294710.844000] enable tsm0
Sending all processes the
[4294711.134000] autodetecting NIMs...
Unmounting remote file
[4294711.175000] ret: 2, feid: 06
Stopping portmap daemon.

2ND STAGE OK, build #84 (2011-09-02)
[4294719.735000] VIDEO0: stop decodeetup
{000001
[4294719.739000] no decoder left in sync handling so disable xpt_sync
0.007  - fp init
0.
[4294719.824000] registered vtuner vtuner0, minor 62
0.742  - config loaded.
[4294719.863000] registered vtuter set
[4294721.743000] input: dreambox ir mouse as /class/input/input4
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
ntfs [4294721.906000] NTFS driver 2.1.27 [Flags: R/O MODULE].zed
Scanning JFFS2 FS: . done.
udf
[4294722.972000] dib0700: loaded with support for 14 different device-types
load: Failed to find inode
 -
[4294722.990000] dvb-usb: found a 'Hauppauge Nova-T S

oftware demuxer.
1366x7
[4294724.226000] DVB: registering new adapter (Hauppauge Nova-T Stick)_12
[4294724.508000] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...1280x720p_70Hz !DVI_
[4294724.750000] DiB0070: successfull
nput51920x
[4294724.788000] dvb-usb: schedule remote query interval to 50 msecs. 1
create surface 1920 1080
[4294724.795000] dvb-usb: Hauppauge Nova-T Stick successfully initialized and col
nnected.g>
[4294724.806000] usbcore: registered new driver dvb_usb_dib07001280x720
lcd: /boot/vmlinux-2.6.18-7.4
open-multiboot - debug: backup kernel for image 'flash' version 2.6.18-7.4-dm800 (satdreamgr@images) (gcc vers
[4294725.124000] VIDEO0: set blank to 0
[4294725.129000] sync is off so we enable itFri Jun 6 00:02:32 EEST 2014
[4294725.134000] playback!
Fetching vars
[4294725.136000] total video delay: 0
Default command line =
[4294725.358000] VIDEO0: first pts 0x03 rootfstype=jffs2 rw console=null qui
[4294725.362000] VIDEO0: framerate changed 3
2 831ffebc 83029b34
[4294725.366000] VIDEO0: resolution changed (1280 720)
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 eb
[4294725.371000] VIDEO0: aspect changed 3
[4294725.380000] set current avs auto aspect to 16:9
Determined physical RAM map:
[4294725.385000] disable wss on display 0usable)
[4294725.389000] disable wss on display 1
User-defined
[4294725.420000] VIDEO0: set blank to 0g
Built 1 zonelists.  Total pages: 6553
[4294725.425000] VIDEO0: stop decodeeo
<5>Kernel command line: console=t
[4294725.429000] VIDEO0: set blank to 0rootfst294746.658000] SET FORMAT: displ
[4294725.433000] no decoder left in sync handling so disable xpt_sync746
before init RAC 0x02a00000      0x000000009
open-multiboot - debug: the framebuffer device was opened successfully0
[4294667.296000] Primary instruction
open-multiboot - debug: current mode is 720x576, 32bpp, stride 2880000] set sb to 3(1)
[4294
ize 16 byt
open-multiboot - debug: the framebuffer device was mapped to memory successfullytions).4747.119000] VIDEO0: set blank to 0

open-multiboot - debug: set color paletteandler fastpath (31 instructions).294747.
open-multiboot - debug: set manual blit
[4294667.2
open-multiboot - debug: input device openeddisable xpt_sync
[4294667.296000] PID has
open-multiboot - error: failed to set lcd bin modestoring mixer settings...
open-multiboot - error: cannot read lcd x resolutionquency: 14
[4294748.205000] use EDID to detect colorspace
[4294667.369000] Dentry cache has
[4294748.210000] using colorspace: 1072 bytes) discover...
[4294748.279000] bcm_video_analog_port_setup (fmt=6)

[4294667.378000] Inode-cache hash table entries:
[4294748.398000] SET FORMAT: display[1], format=6
ip: RTNETLINK answers: Fil
[4294748.418000] set current avs auto aspect to 16:9ilable (3238k kernel code, 117040k r1
[4294748.423000] disable wss on display 0internet superserver:
eserved, 665k data
[4294748.427000] disable wss on display 1klogd: done
[4294667.445000]
[4294748.431000] set sb to 3(1)mon:
[4294748.631000] VIDEO0: start decode00] registering PCI controller with i
[4294748.653000] flush video decoder
[4294
[4294748.798000] VIDEO0: first pts 0x0em initialized
[4294
[4294748.860000] VIDEO0: set blank to 0core: registered new driver usbfs
[4294
[4294748.866000] VIDEO0: stop decode
[4294667.489000] usbcore:
[4294748.869000] VIDEO0: set blank to 0
[42
[
[4294748.873000] no decoder left in sync handling so disable xpt_sync0000 + 00
PYTHO
ALSA: Restoring mixer settings...0300

udhcpc (v1.19.4) startedL_eA8_
[4294667
Sending discover...shed hash table ent
Sending select for 192.168.1.101...
 - double buffering availabl
Lease of 192.168.1.101 obtained, lease time 172800667.550000] TCP bind hash table entries: 4096 (ord
ip: RTNETLINK answers: File exists x 720 x 32 (stride: 5120)
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1ash tables configured (established 8192 bind 40
Starting internet superserver: ine

[4294767.682000] playback!0] fuse init (API version
[4294767.684000] total video delay: 0 (0 ms)
[4294667.592000] SGI XFS with large bloc
[4294767.701000] VIDEO0: start decodeault
[4294781.75400
[4294767.715000] flush video decoderInitializing Cryptographic API294781
[4294767.958000] VIDEO0: first pts 0x0
[4294667.604000] io scheduler noop
[4294768.021000] VIDEO0: set blank to 0
[4294667.608000] io sch
[4294768.026000] VIDEO0: stop decodelt)
[42947
[4294768.030000] VIDEO0: set blank to 0614000] io scheduler deadline registere
[4294768.034000] no decoder left in syn

[4294667.658000] Broadcom BCM7401 P31 Ethernet Netw
+ (9) GFBDC2.0 Jun  6
16384k video memONPATH: /usr/lib
[4294779.582000] bcmfb: enable manual blit
DV
0:01:10RSION 5
[4294667.666000]
[4294779.587000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_
+
[4294667.678000] Config Internal PHY Through MDIO: 1
R8_G8_B8)-Duplex (
 - double buffering available!044000] bcm_accel: invalid opc
9184kB available for acceleration surfaces.0] ata1: SATA max UDMA/133 cmd 0xB0510000 c
resolution: 1280 x 720 x 32 (stride: 5120).174000] bcmfb: enable manual blit
+ (9) gLCDDC
051003
[FONT] loading fonts...pde 132
[FONT] Intializing font cache, using max. 4MB...64 x 8 (s
th 0/32)2)
[4294669.753000] ata1
+ (10) gRCdev 0 mult
FATAL: base/ebase.cpp:155 ASSERTION notifiers.find(fd) == notifiers.end() FAILEDta1.00: configured for UDMA/133ts...
[FONT] Intializing f
!4
Segmentation faultndor: ATA       Mo
[4294783.193000] VIDEO0: set blank to 010) gRC
FATAL: base/ebase.cpp
[4294783.214000] sync is off so we enable itype:   Direct-Access                      AN
[4294783.220000] playback!
!
[4294783.222000] total video delay: 0 (0 ms) 052500
[4294669.780000] SCSI device sda: 48
[4294783.234000] VIDEO0: start decode48000] sync is o

PYTHONPATH: /usr/lib/enigma2/python[4294669.814000]  sda: sda1
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 30:0:0: Attached scsi disk sdat_sync
+ (1) Background File Eraser
[4294669.883000]
+ (5) Tuxtxtttached scsi
+ (8) graphics acceleration manager
DVB_API_VERSION 5
[4294787.499000] bcm_accel: invalid opcode! 00000080on: 1.30 $
lcd buffer 0x7f7cc8 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
FATAL: base/ebase.cpp:155 ASSERTION notifiers.find(fd) == notifiers.end() FAILED
!
Segmentation fault
[4294788.846000] VIDEO0: set blank to 0
[4294788.870000] sync is off so we enable it
[4294788.874000] playback!
[4294788.877000] total video delay: 0 (0 ms)
[4294788.892000] VIDEO0: start decode
[4294788.906000] flush video decoder
[4294789.018000] VIDEO0: first pts 0x0
[4294789.093000] VIDEO0: set blank to 0
[4294789.098000] VIDEO0: stop decode
[4294789.103000] VIDEO0: set blank to 0
[4294789.106000] no decoder left in sync handling so disable xpt_sync
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3