Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- _ _ .____
- | |_| | | _ \
- | _ | | (_))
- | |-| | | |
- |_| |_| |_| ..
- _ _ ____ _
- | | | | | __ ) ___ ___ | |_
- | | | |___| _ \ / _ \ / _ \| __|
- | |_| |___| |_) | (_) | (_) | |_
- \___/ |____/ \___/ \___/ \__|
- ** LOADER **
- ** BOARD: DB-88F6281A-BP LE
- U-Boot 1.1.4 (Jan 8 2010 - 14:03:56) MIC version : 3.4.19-16
- U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CD4E0
- Soc: 88F6281 A1 (DDR2)
- CPU running @ 1200Mhz L2 running @ 400Mhz
- SysClock = 400Mhz , TClock = 200Mhz
- DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
- DRAM CS[0] base 0x00000000 size 256MB
- DRAM CS[1] base 0x10000000 size 256MB
- DRAM Total size 512MB 16bit width
- Addresses 8M - 0M are saved for the U-Boot usage.
- Mem malloc Initialization (8M - 7M): Done
- [1024kB@f8000000] Flash: 1 MB
- CPU : Marvell Feroceon (Rev 1)
- Streaming disabled
- Write allocate disabled
- USB 0: host mode
- PEX 0: PCI Express Root Complex Interface
- PEX interface detected Link X1
- Net: egiga0 [PRIME], egiga1
- Hit any key to stop autoboot: 0
- HP>> usb start
- (Re)start USB...
- USB: scanning bus for devices... 3 USB Device(s) found
- Waiting for storage device(s) to settle before scanning...
- 1 Storage Device(s) found
- HP>> usb storage
- Device 0: Vendor: Generic Prod.: Flash Disk Rev: 8.07
- Type: Removable Hard Disk
- Capacity: 1921.0 MB = 1.8 GB (3934208 x 512)
- HP>> fatload usb 0:1 0x00800000 netbsd.ub
- reading netbsd.ub
- ....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
- 5293440 bytes read
- HP>> boot 0x00800000
- Usage:
- boot - boot default, i.e., run 'bootcmd'
- HP>> bootm 0x00800000
- ## Booting image at 00800000 ...
- Image Name: NetBSD/sheevaplug 7.0
- Created: 2015-09-25 9:04:50 UTC
- Image Type: ARM NetBSD Kernel Image (uncompressed)
- Data Size: 5293376 Bytes = 5 MB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- OK
- ## Transferring control to NetBSD stage-2 loader (at address 00008000) ...
- NetBSD/evbarm (sheevaplug) booting ...
- [ Kernel symbol table missing! ]
- Loaded initial symtab at 0xc043ae48, strtab at 0xc047df48, # entries 16192
- pmap_postinit: Allocated 35 static L1 descriptor tables
- Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
- 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
- The NetBSD Foundation, Inc. All rights reserved.
- Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
- NetBSD 7.0 (SHEEVAPLUG.201509250726Z)
- total memory = 512 MB
- avail memory = 496 MB
- sysctl_createv: sysctl_create(machine_arch) returned 17
- kern.module.path=/stand/evbarm/7.0/modules
- mainbus0 (root)
- cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core)
- cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
- cpu0: 16KB/32B 4-way L1 VIVT Instruction cache
- cpu0: 16KB/32B 4-way write-back-locking-C L1 VIVT Data cache
- mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood
- mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz
- mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer
- mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General Purpose I/O Port Interface
- mvsocgpp0: 50 gpio pins
- mvsocgpp0: interrupts 96..103, intr 35
- mvsocgpp0: interrupts 104..111, intr 36
- mvsocgpp0: interrupts 112..119, intr 37
- mvsocgpp0: interrupts 120..127, intr 38
- mvsocgpp0: interrupts 128..135, intr 39
- mvsocgpp0: interrupts 136..143, intr 40
- mvsocgpp0: interrupts 144..151, intr 41
- mvsocgpp0: Data Out: 0x00000000
- mvsocgpp0: Data Out Enable Control: 0x00000000
- mvsocgpp0: Data Blink Enable: 0x00000000
- mvsocgpp0: Data In Polarity: 0x00000000
- mvsocgpp0: Data In: 0x00000000
- mvsocgpp0: Interrupt Cause: 0x00000000
- mvsocgpp0: Interrupt Mask: 0x00000000
- mvsocgpp0: Interrupt Level Mask: 0x00000000
- mvsocgpp0: High Data Out: 0x0000d000
- mvsocgpp0: High Data Out Enable Ctrl: 0xfffe2fff
- mvsocgpp0: High Blink Enable: 0x00000000
- mvsocgpp0: High Data In Polarity: 0x00000040
- mvsocgpp0: High Data In: 0x0002f040
- mvsocgpp0: High Interrupt Cause: 0x00000000
- mvsocgpp0: High Interrupt Mask: 0x00000000
- mvsocgpp0: High Interrupt Level Mask: 0x00000000
- gpio0 at mvsocgpp0: 50 pins
- mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
- com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
- com0: console
- com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
- ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface
- usb0 at ehci0: USB revision 2.0
- gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine
- gtidmac0: XOR Engine 4 channels, intr 5...8
- gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
- iic0 at gttwsi0: I2C bus
- mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell Cryptographic Engines and Security Accelerator
- mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller
- mvgbe0 at mvgbec0 port 0 irq 11
- mvgbe0: Ethernet address f4:ce:46:
- ukphy0 at mvgbe0 phy 8: OUI 0x000ac2, model 0x0022, rev. 0
- ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller
- mvgbe at mvgbec1 port 0 not configured
- mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface
- extent_alloc_subregion: extent `pexmem', size 0x4000000
- panic: extent_alloc_subregion: bad size
- Stopped in pid 0.1 (system) at netbsd:cpu_Debugger+0x4: bx r14
- db>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement