API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 25th, 2013
10
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.91 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda Green (Adv. Format)
  6. Device Model: ST2000DL003-9VT166
  7. Serial Number: 6YD022XP
  8. LU WWN Device Id: 5 000c50 032dd8b48
  9. Firmware Version: CC32
  10. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Fri Jan 25 19:05:55 2013 EST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21. See vendor-specific Attribute list for marginal Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 623) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 255) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x30b7) SCT Status supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 9916320
  60. 3 Spin_Up_Time 0x0003 094 092 000 Pre-fail Always - 0
  61. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 884
  62. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 19250540
  64. 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10467
  65. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 665
  67. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  68. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  69. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  70. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032841
  71. 189 High_Fly_Writes 0x003a 083 083 000 Old_age Always - 17
  72. 190 Airflow_Temperature_Cel 0x0022 047 033 045 Old_age Always In_the_past 53 (90 248 64 48)
  73. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  74. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 417
  75. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 950
  76. 194 Temperature_Celsius 0x0022 053 067 000 Old_age Always - 53 (0 16 0 0)
  77. 195 Hardware_ECC_Recovered 0x001a 015 005 000 Old_age Always - 9916320
  78. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  79. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 261756781865245
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1379040301
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 972034206
  84.  
  85. SMART Error Log Version: 1
  86. No Errors Logged
  87.  
  88. SMART Self-test log structure revision number 1
  89. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  90.  
  91.  
  92. SMART Selective self-test log data structure revision number 1
  93. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  94. 1 0 0 Not_testing
  95. 2 0 0 Not_testing
  96. 3 0 0 Not_testing
  97. 4 0 0 Not_testing
  98. 5 0 0 Not_testing
  99. Selective self-test flags (0x0):
  100. After scanning selected spans, do NOT read-scan remainder of disk.
  101. If Selective self-test is pending on power-up, resume after 0 minute delay.
  102.  
  103. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
  104. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  105.  
  106. === START OF INFORMATION SECTION ===
  107. Model Family: Seagate Barracuda Green (Adv. Format)
  108. Device Model: ST2000DL003-9VT166
  109. Serial Number: 6YD022XP
  110. LU WWN Device Id: 5 000c50 032dd8b48
  111. Firmware Version: CC32
  112. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  113. Sector Size: 512 bytes logical/physical
  114. Device is: In smartctl database [for details use: -P show]
  115. ATA Version is: 8
  116. ATA Standard is: ATA-8-ACS revision 4
  117. Local Time is: Fri Jan 25 19:06:26 2013 EST
  118. SMART support is: Available - device has SMART capability.
  119. SMART support is: Enabled
  120.  
  121. === START OF READ SMART DATA SECTION ===
  122. SMART overall-health self-assessment test result: PASSED
  123. See vendor-specific Attribute list for marginal Attributes.
  124.  
  125. General SMART Values:
  126. Offline data collection status: (0x82) Offline data collection activity
  127. was completed without error.
  128. Auto Offline Data Collection: Enabled.
  129. Self-test execution status: ( 0) The previous self-test routine completed
  130. without error or no self-test has ever
  131. been run.
  132. Total time to complete Offline
  133. data collection: ( 623) seconds.
  134. Offline data collection
  135. capabilities: (0x7b) SMART execute Offline immediate.
  136. Auto Offline data collection on/off support.
  137. Suspend Offline collection upon new
  138. command.
  139. Offline surface scan supported.
  140. Self-test supported.
  141. Conveyance Self-test supported.
  142. Selective Self-test supported.
  143. SMART capabilities: (0x0003) Saves SMART data before entering
  144. power-saving mode.
  145. Supports SMART auto save timer.
  146. Error logging capability: (0x01) Error logging supported.
  147. General Purpose Logging supported.
  148. Short self-test routine
  149. recommended polling time: ( 1) minutes.
  150. Extended self-test routine
  151. recommended polling time: ( 255) minutes.
  152. Conveyance self-test routine
  153. recommended polling time: ( 2) minutes.
  154. SCT capabilities: (0x30b7) SCT Status supported.
  155. SCT Feature Control supported.
  156. SCT Data Table supported.
  157.  
  158. SMART Attributes Data Structure revision number: 10
  159. Vendor Specific SMART Attributes with Thresholds:
  160. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  161. 1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 9916320
  162. 3 Spin_Up_Time 0x0003 094 092 000 Pre-fail Always - 0
  163. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 884
  164. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  165. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 19250540
  166. 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10467
  167. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  168. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 665
  169. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  170. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  171. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  172. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032841
  173. 189 High_Fly_Writes 0x003a 083 083 000 Old_age Always - 17
  174. 190 Airflow_Temperature_Cel 0x0022 047 033 045 Old_age Always In_the_past 53 (90 248 64 48)
  175. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  176. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 417
  177. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 950
  178. 194 Temperature_Celsius 0x0022 053 067 000 Old_age Always - 53 (0 16 0 0)
  179. 195 Hardware_ECC_Recovered 0x001a 015 005 000 Old_age Always - 9916320
  180. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  181. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  182. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  183. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 110865990822173
  184. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1379040301
  185. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 972034206
  186.  
  187. SMART Error Log Version: 1
  188. No Errors Logged
  189.  
  190. SMART Self-test log structure revision number 1
  191. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  192.  
  193.  
  194. SMART Selective self-test log data structure revision number 1
  195. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  196. 1 0 0 Not_testing
  197. 2 0 0 Not_testing
  198. 3 0 0 Not_testing
  199. 4 0 0 Not_testing
  200. 5 0 0 Not_testing
  201. Selective self-test flags (0x0):
  202. After scanning selected spans, do NOT read-scan remainder of disk.
  203. If Selective self-test is pending on power-up, resume after 0 minute delay.
  204.  
  205. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
  206. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  207.  
  208. === START OF INFORMATION SECTION ===
  209. Model Family: Seagate Barracuda Green (Adv. Format)
  210. Device Model: ST2000DL003-9VT166
  211. Serial Number: 6YD022XP
  212. LU WWN Device Id: 5 000c50 032dd8b48
  213. Firmware Version: CC32
  214. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  215. Sector Size: 512 bytes logical/physical
  216. Device is: In smartctl database [for details use: -P show]
  217. ATA Version is: 8
  218. ATA Standard is: ATA-8-ACS revision 4
  219. Local Time is: Fri Jan 25 19:07:00 2013 EST
  220. SMART support is: Available - device has SMART capability.
  221. SMART support is: Enabled
  222.  
  223. === START OF READ SMART DATA SECTION ===
  224. SMART overall-health self-assessment test result: PASSED
  225. See vendor-specific Attribute list for marginal Attributes.
  226.  
  227. General SMART Values:
  228. Offline data collection status: (0x82) Offline data collection activity
  229. was completed without error.
  230. Auto Offline Data Collection: Enabled.
  231. Self-test execution status: ( 0) The previous self-test routine completed
  232. without error or no self-test has ever
  233. been run.
  234. Total time to complete Offline
  235. data collection: ( 623) seconds.
  236. Offline data collection
  237. capabilities: (0x7b) SMART execute Offline immediate.
  238. Auto Offline data collection on/off support.
  239. Suspend Offline collection upon new
  240. command.
  241. Offline surface scan supported.
  242. Self-test supported.
  243. Conveyance Self-test supported.
  244. Selective Self-test supported.
  245. SMART capabilities: (0x0003) Saves SMART data before entering
  246. power-saving mode.
  247. Supports SMART auto save timer.
  248. Error logging capability: (0x01) Error logging supported.
  249. General Purpose Logging supported.
  250. Short self-test routine
  251. recommended polling time: ( 1) minutes.
  252. Extended self-test routine
  253. recommended polling time: ( 255) minutes.
  254. Conveyance self-test routine
  255. recommended polling time: ( 2) minutes.
  256. SCT capabilities: (0x30b7) SCT Status supported.
  257. SCT Feature Control supported.
  258. SCT Data Table supported.
  259.  
  260. SMART Attributes Data Structure revision number: 10
  261. Vendor Specific SMART Attributes with Thresholds:
  262. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  263. 1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 9916320
  264. 3 Spin_Up_Time 0x0003 094 092 000 Pre-fail Always - 0
  265. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 884
  266. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  267. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 19250540
  268. 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10467
  269. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  270. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 665
  271. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  272. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  273. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  274. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032841
  275. 189 High_Fly_Writes 0x003a 083 083 000 Old_age Always - 17
  276. 190 Airflow_Temperature_Cel 0x0022 047 033 045 Old_age Always In_the_past 53 (90 248 64 48)
  277. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  278. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 417
  279. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 950
  280. 194 Temperature_Celsius 0x0022 053 067 000 Old_age Always - 53 (0 16 0 0)
  281. 195 Hardware_ECC_Recovered 0x001a 015 005 000 Old_age Always - 9916320
  282. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  283. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  284. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  285. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 258196253976861
  286. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1379040301
  287. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 972034206
  288.  
  289. SMART Error Log Version: 1
  290. No Errors Logged
  291.  
  292. SMART Self-test log structure revision number 1
  293. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  294.  
  295.  
  296. SMART Selective self-test log data structure revision number 1
  297. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  298. 1 0 0 Not_testing
  299. 2 0 0 Not_testing
  300. 3 0 0 Not_testing
  301. 4 0 0 Not_testing
  302. 5 0 0 Not_testing
  303. Selective self-test flags (0x0):
  304. After scanning selected spans, do NOT read-scan remainder of disk.
  305. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!