Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
- Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.
- 2960-24TT starting...
- Base ethernet MAC Address: 0001.428D.2B38
- Xmodem file system is available.
- Initializing Flash...
- flashfs[0]: 1 files, 0 directories
- flashfs[0]: 0 orphaned files, 0 orphaned directories
- flashfs[0]: Total bytes: 64016384
- flashfs[0]: Bytes used: 4414921
- flashfs[0]: Bytes available: 59601463
- flashfs[0]: flashfs fsck took 1 seconds.
- ...done Initializing Flash.
- Boot Sector Filesystem (bs:) installed, fsid: 3
- Parameter Block Filesystem (pb:) installed, fsid: 4
- Loading "flash:/c2960-lanbase-mz.122-25.FX.bin"...
- ########################################################################## [OK]
- Restricted Rights Legend
- Use, duplication, or disclosure by the Government is
- subject to restrictions as set forth in subparagraph
- (c) of the Commercial Computer Software - Restricted
- Rights clause at FAR sec. 52.227-19 and subparagraph
- (c) (1) (ii) of the Rights in Technical Data and Computer
- Software clause at DFARS sec. 252.227-7013.
- cisco Systems, Inc.
- 170 West Tasman Drive
- San Jose, California 95134-1706
- Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
- Copyright (c) 1986-2005 by Cisco Systems, Inc.
- Compiled Wed 12-Oct-05 22:05 by pt_team
- Image text-base: 0x80008098, data-base: 0x814129C4
- Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.
- 24 FastEthernet/IEEE 802.3 interface(s)
- 2 Gigabit Ethernet/IEEE 802.3 interface(s)
- 63488K bytes of flash-simulated non-volatile configuration memory.
- Base ethernet MAC Address : 0001.428D.2B38
- Motherboard assembly number : 73-9832-06
- Power supply part number : 341-0097-02
- Motherboard serial number : FOC103248MJ
- Power supply serial number : DCA102133JA
- Model revision number : B0
- Motherboard revision number : C0
- Model number : WS-C2960-24TT
- System serial number : FOC1033Z1EY
- Top Assembly Part Number : 800-26671-02
- Top Assembly Revision Number : B0
- Version ID : V02
- CLEI Code Number : COM3K00BRA
- Hardware Board Revision Number : 0x01
- Switch Ports Model SW Version SW Image
- ------ ----- ----- ---------- ----------
- * 1 26 WS-C2960-24TT 12.2 C2960-LANBASE-M
- Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
- Copyright (c) 1986-2005 by Cisco Systems, Inc.
- Compiled Wed 12-Oct-05 22:05 by pt_team
- Press RETURN to get started!
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/2, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/3, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up
- Switch>enable
- Switch#show run
- Building configuration...
- Current configuration : 1033 bytes
- !
- version 12.2
- no service timestamps log datetime msec
- no service timestamps debug datetime msec
- no service password-encryption
- !
- hostname Switch
- !
- !
- spanning-tree mode pvst
- !
- interface FastEthernet0/1
- !
- interface FastEthernet0/2
- !
- interface FastEthernet0/3
- !
- interface FastEthernet0/4
- !
- Switch#conf ?
- terminal Configure from the terminal
- <cr>
- Switch#conf conf t
- ^
- % Invalid input detected at '^' marker.
- Switch#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Switch(config)#int fa0/1
- Switch(config-if)#switch mode acc
- Switch(config-if)#switch port max 1
- Switch(config-if)#switch port ?
- mac-address Secure mac address
- maximum Max secure addresses
- violation Security violation mode
- <cr>
- Switch(config-if)#switch port switch port mac sticky
- ^
- % Invalid input detected at '^' marker.
- Switch(config-if)#switch port mac sticky
- Switch(config-if)#switch port viol shut
- Switch(config-if)#end
- Switch#
- %SYS-5-CONFIG_I: Configured from console by console
- Switch#show port-sec int fa0/1
- Port Security : Disabled
- Port Status : Secure-down
- Violation Mode : Shutdown
- Aging Time : 0 mins
- Aging Type : Absolute
- SecureStatic Address Aging : Disabled
- Maximum MAC Addresses : 1
- Total MAC Addresses : 0
- Configured MAC Addresses : 0
- Sticky MAC Addresses : 0
- Last Source Address:Vlan : 0000.0000.0000:0
- Security Violation Count : 0
- Switch#
- %LINK-5-CHANGED: Interface FastEthernet0/3, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/3, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/3, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- ==================================================================================================
- Aging Type : Absolute
- SecureStatic Address Aging : Disabled
- Maximum MAC Addresses : 1
- Total MAC Addresses : 1
- Configured MAC Addresses : 0
- Sticky MAC Addresses : 1
- Last Source Address:Vlan : 000C.CF80.E113:1
- Security Violation Count : 1
- Switch#
- Switch#configure terminal
- Enter configuration commands, one per line. End with CNTL/Z.
- Switch(config)#interface FastEthernet0/1
- Switch(config-if)#no shutdown
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- Switch(config-if)#end
- %SYS-5-CONFIG_I: Configured from console by console
- Switch#show port-sec int fa0/1
- Port Security : Enabled
- Port Status : Secure-shutdown
- Violation Mode : Shutdown
- Aging Time : 0 mins
- Aging Type : Absolute
- SecureStatic Address Aging : Disabled
- Maximum MAC Addresses : 1
- Total MAC Addresses : 1
- Configured MAC Addresses : 0
- Sticky MAC Addresses : 1
- Last Source Address:Vlan : 000C.CF80.E113:1
- Security Violation Count : 1
- Switch#
- Switch#
- Switch#
- Switch#configure terminal
- Enter configuration commands, one per line. End with CNTL/Z.
- Switch(config)#interface FastEthernet0/1
- Switch(config-if)#no shutdown
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- Switch(config-if)#shutdown
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
- Switch(config-if)#no shutdown
- Switch(config-if)#
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- Switch(config-if)#swsswitchport port-security violation shutdown
- Switch(config-if)#
- Switch(config-if)#exit
- Switch(config)#interface FastEthernet0/1
- Switch(config-if)#no shutdown
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- Switch(config-if)#shutdown
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
- Switch(config-if)#no shutdown
- Switch(config-if)#
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- Switch(config-if)#switchport port-security violation restrict
- Switch(config-if)#end
- %SYS-5-CONFIG_I: Configured from console by console
- Switch#
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- Switch#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Switch(config)#int fa0/1
- Switch(config-if)#switchport port-security interface fa0/1
- ^
- % Invalid input detected at '^' marker.
- Switch(config-if)#exit
- Switch(config)#end
- Switch#
- %SYS-5-CONFIG_I: Configured from console by console
- show
- % Incomplete command.
- Switch#show port-security interface fa0/1
- Port Security : Enabled
- Port Status : Secure-up
- Violation Mode : Restrict
- Aging Time : 0 mins
- Aging Type : Absolute
- SecureStatic Address Aging : Disabled
- Maximum MAC Addresses : 1
- Total MAC Addresses : 1
- Configured MAC Addresses : 0
- Sticky MAC Addresses : 1
- Last Source Address:Vlan : 000C.CF80.E113:1
- Security Violation Count : 0
- Switch#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Switch(config)#int fa0/1
- Switch(config-if)#switchport port-security violation shutdown
- Switch(config-if)#end
- Switch#
- %SYS-5-CONFIG_I: Configured from console by console
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- exit
- Switch con0 is now available
- Press RETURN to get started.
- Switch>return
- Translating "return"...domain server (255.255.255.255)
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
- ===========================================================================================
- %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
- Router(config-if)#int fa0/3
- %Invalid interface type and number
- Router(config)#ip address 10.10.1.100 255.0.0.0
- ^
- % Invalid input detected at '^' marker.
- Router(config)#int fa0/3
- %Invalid interface type and number
- Router(config)#int fa0/0
- Router(config-if)#ip address 10.10.1.100 255.0.0.0
- % 10.0.0.0 overlaps with FastEthernet0/1
- Router(config-if)#no shutdown
- % 10.0.0.0 overlaps with FastEthernet0/1
- FastEthernet0/0: incorrect IP address assignment
- Router(config-if)#ip address 10.10.1.101 255.0.0.0
- % 10.0.0.0 overlaps with FastEthernet0/1
- Router(config-if)#ip address 10.10.0.101 255.0.0.0
- % 10.0.0.0 overlaps with FastEthernet0/1
- Router(config-if)#ip address 10.10.0.100 255.0.0.0
- % 10.0.0.0 overlaps with FastEthernet0/1
- Router(config-if)#
- %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
- Router(config-if)#username Kazio pass Kazio123
- Router(config)#line vty 0 4
- Router(config-line)#login local
- Router(config-line)#show run
- ^
- % Invalid input detected at '^' marker.
- Router(config-line)#end
- Router#
- %SYS-5-CONFIG_I: Configured from console by console
- show run
- Building configuration...
- Current configuration : 478 bytes
- !
- version 12.2
- no service timestamps log datetime msec
- no service timestamps debug datetime msec
- no service password-encryption
- !
- hostname Router
- !
- !
- !
- !
- !
- !
- !
- !
- username Kazio password 0 Kazio123
- !
- !
- !
- !
- !
- Router#show run
- Building configuration...
- Current configuration : 478 bytes
- !
- version 12.2
- no service timestamps log datetime msec
- no service timestamps debug datetime msec
- no service password-encryption
- !
- hostname Router
- !
- !
- !
- !
- !
- !
- !
- !
- username Kazio password 0 Kazio123
- !
- !
- !
- Router#show run
- Building configuration...
- Current configuration : 478 bytes
- !
- version 12.2
- no service timestamps log datetime msec
- no service timestamps debug datetime msec
- no service password-encryption
- !
- hostname Router
- !
- !
- !
- !
- !
- !
- !
- !
- username Kazio password 0 Kazio123
- !
- !
- !
- !
- !
- !
- !
- !
- !
- !
- !
- interface FastEthernet0/0
- ip address 10.10.0.100 255.0.0.0
- duplex auto
- speed auto
- shutdown
- !
- interface FastEthernet0/1
- ip address 10.10.1.100 255.0.0.0
- duplex auto
- speed auto
- !
- ip classless
- !
- !
- !
- !
- !
- !
- !
- line con 0
- line vty 0 4
- login local
- !
- !
- !
- end
- Router#
- Router#
- Router#
- Router#
- Router#
- Router#
- Router#
- Router#
- Router#
- Router#
- Router#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#service pass
- Router(config)#show run
- ^
- % Invalid input detected at '^' marker.
- Router(config)#end
- Router#
- %SYS-5-CONFIG_I: Configured from console by console
- Router#show run
- Building configuration...
- Current configuration : 485 bytes
- !
- version 12.2
- no service timestamps log datetime msec
- no service timestamps debug datetime msec
- service password-encryption
- !
- hostname Router
- !
- !
- !
- !
- !
- !
- !
- !
- username Kazio password 7 080A4D540016544541
- !
- !
- !
- !
- !
- Router#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#username Stasia password-encryption Stasia123
- ^
- % Invalid input detected at '^' marker.
- Router(config)#username Stasia secret stasia123
- Router(config)#end
- Router#
- %SYS-5-CONFIG_I: Configured from console by console
- Router#show run
- Building configuration...
- Current configuration : 541 bytes
- !
- version 12.2
- no service timestamps log datetime msec
- no service timestamps debug datetime msec
- service password-encryption
- !
- hostname Router
- !
- !
- !
- !
- !
- !
- !
- !
- username Kazio password 7 080A4D540016544541
- username Stasia secret 5 $1$mERr$IbxmCt.GGwf9QXvoQGr80.
- !
- !
- --More--
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement