[   36.492314] vesafb: framebuffer at 0x10028000, mapped to 0xd0880000, using 7200k, total 16384k
[   36.492322] vesafb: mode is 1280x720x32, linelength=5120, pages=4096
[   36.492325] vesafb: scrolling: redraw
[   36.492330] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   36.492511] Console: switching to colour frame buffer device 160x45
[   36.576156] fb0: VESA VGA frame buffer device
[   36.802593] fuse init (API version 7.9)
[   36.825347] ACPI: processor limited to max C-state 2
[   36.825620] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   36.825628] ACPI: Processor [CPU0] (supports 8 throttling states)
[   36.825648] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[   37.620170] usbcore: registered new interface driver usbfs
[   37.620207] usbcore: registered new interface driver hub
[   37.640102] usbcore: registered new device driver usb
[   37.660055] USB Universal Host Controller Interface driver v3.0
[   37.660143] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
[   37.660159] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   37.660166] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   37.660577] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   37.660617] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002020
[   37.660823] usb usb1: configuration #1 chosen from 1 choice
[   37.660862] hub 1-0:1.0: USB hub found
[   37.660871] hub 1-0:1.0: 2 ports detected
[   37.704389] 8139too Fast Ethernet driver 0.9.28
[   37.760749] SCSI subsystem initialized
[   37.773917] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
[   37.773927] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
[   37.773946] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   37.773952] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   37.773989] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   37.777900] ehci_hcd 0000:00:1d.7: debug port 1
[   37.777909] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   37.777918] ehci_hcd 0000:00:1d.7: irq 18, io mem 0x22605000
[   37.791914] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   37.792091] usb usb2: configuration #1 chosen from 1 choice
[   37.792130] hub 2-0:1.0: USB hub found
[   37.792139] hub 2-0:1.0: 8 ports detected
[   37.805452] libata version 3.00 loaded.
[   37.896089] PCI: Enabling device 0000:03:03.0 (0000 -> 0003)
[   37.896107] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 19
[   37.896126] PCI: Setting latency timer of device 0000:03:03.0 to 64
[   37.897269] eth0: RealTek RTL8139 at 0x1000, 00:1f:5b:aa:61:44, IRQ 19
[   37.897275] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   37.914623] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   37.926551] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[   37.926600] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   37.926619] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   37.931693] ata_piix 0000:00:1f.1: version 2.12
[   37.931710] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[   37.931749] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   37.939550] scsi0 : ata_piix
[   37.940158] scsi1 : ata_piix
[   37.940882] ata1: PATA max UDMA/100 cmd 0x2058 ctl 0x2064 bmdma 0x2040 irq 20
[   37.940888] ata2: PATA max UDMA/100 cmd 0x2050 ctl 0x2060 bmdma 0x2048 irq 20
[   38.116349] ata1.00: ATA-7: FUJITSU MHW2040AT, 0081000C, max UDMA/33
[   38.116357] ata1.00: 78140160 sectors, multi 16: LBA48
[   38.132263] ata1.00: configured for UDMA/33
[   38.299390] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2040A 0081 PQ: 0 ANSI: 5
[   38.315468] usb 2-1: new high speed USB device using ehci_hcd and address 2
[   38.423250] Driver 'sd' needs updating - please use bus_type methods
[   38.423378] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[   38.423398] sd 0:0:0:0: [sda] Write Protect is off
[   38.423403] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   38.423429] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   38.423502] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[   38.423518] sd 0:0:0:0: [sda] Write Protect is off
[   38.423522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   38.423547] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   38.423553]  sda:<6>usb 2-1: configuration #1 chosen from 1 choice
[   38.848963]  sda1 sda2 sda3 sda4
[   38.849133] sd 0:0:0:0: [sda] Attached SCSI disk
[   38.857784] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   38.918999] usbcore: registered new interface driver libusual
[   38.925448] Initializing USB Mass Storage driver...
[   38.926644] scsi2 : SCSI emulation for USB Mass Storage devices
[   38.927432] usbcore: registered new interface driver usb-storage
[   38.927438] USB Mass Storage support registered.
[   38.927536] usb-storage: device found at 2
[   38.927539] usb-storage: waiting for device to settle before scanning
[   39.242585] usb 1-2: new low speed USB device using uhci_hcd and address 2
[   39.420217] usb 1-2: configuration #1 chosen from 1 choice
[   39.468536] usbcore: registered new interface driver hiddev
[   39.525074] input: Apple Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
[   39.525111] input,hidraw0: USB HID v1.11 Device [Apple Inc. IR Receiver] on usb-0000:00:1d.0-2
[   39.525132] usbcore: registered new interface driver usbhid
[   39.525137] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   43.922521] usb-storage: device scan complete
[   46.294510] scsi 2:0:0:0: Direct-Access              Geek Squad       8192 PQ: 0 ANSI: 0 CCS
[   46.300387] sd 2:0:0:0: [sdb] 15663104 512-byte hardware sectors (8020 MB)
[   46.301092] sd 2:0:0:0: [sdb] Write Protect is off
[   46.301097] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   46.301101] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   46.303706] sd 2:0:0:0: [sdb] 15663104 512-byte hardware sectors (8020 MB)
[   46.304458] sd 2:0:0:0: [sdb] Write Protect is off
[   46.304462] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   46.304466] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   46.304471]  sdb:<4>GPT:Primary header thinks Alt. header is not at the end of the disk.
[   46.311430] GPT:7831551 != 15663103
[   46.311433] GPT:Alternate GPT header not at the end of the disk.
[   46.311437] GPT:7831551 != 15663103
[   46.311440] GPT: Use GNU Parted to correct GPT errors.
[   46.311445]  sdb1 sdb2 sdb3 sdb4
[   46.311619] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   46.311679] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   51.571691] kjournald starting.  Commit interval 5 seconds
[   51.571706] EXT3-fs: mounted filesystem with ordered data mode.
[   53.265649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   53.317688] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.400259] Linux agpgart interface v0.102
[   54.240722] intel_rng: FWH not detected
[   54.284807] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   54.456346] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
[   54.456362] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   54.456405] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   54.674135] iTCO_vendor_support: vendor-support=0
[   54.729216] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   54.729337] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[   54.729388] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   54.796397] input: Power Button (FF) as /devices/virtual/input/input3
[   54.808192] ACPI: Power Button (FF) [PWRF]
[   54.808281] input: Power Button (CM) as /devices/virtual/input/input4
[   54.820166] ACPI: Power Button (CM) [PWRB]
[   55.225724] Loading crystalhd v3.5.0
[   55.752124] nvidia: module license 'NVIDIA' taints kernel.
[   56.878864] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   56.890262] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   57.155082] udev: renamed network interface eth0 to eth1
[   57.734135] crystalhd 0000:02:00.0: Starting Device:0x1612
[   57.734172] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[   57.734183] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   57.734193] crystalhd 0000:02:00.0: bar0:0x22400000-0x00010000  bar2:0x22000000-0x00400000
[   57.734225] crystalhd 0000:02:00.0: i2o_addr:0xd11e0000   Mapped addr:0xd1280000
[   58.237036] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   58.237249] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   58.237263] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   58.237432] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   59.371996] loop: module loaded
[   59.432258] lp: driver loaded but no devices found
[   59.751750] Adding 499992k swap on /dev/sdb4.  Priority:-1 extents:1 across:499992k
[   59.856385] EXT3 FS on sdb3, internal journal
[   60.207677] ip_tables: (C) 2000-2006 Netfilter Core Team
[   61.662673] NET: Registered protocol family 17
[   62.476943] No dock devices found.
[   63.755157] NET: Registered protocol family 10
[   63.755756] lo: Disabled Privacy Extensions
[  112.946622] Marking TSC unstable due to: cpufreq changes.
[  112.953251] Time: hpet clocksource has been installed.
[  113.333133] Clocksource tsc unstable (delta = -154675710 ns)
[   71.581364] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[   78.837798] crystalhd 0000:02:00.0: Entering chd_dec_open
[   78.837807] crystalhd 0000:02:00.0: Opening new user[0] handle
[   80.159900] crystalhd 0000:02:00.0: Firmware Downloaded Successfully
[  139.692560] eth1: no IPv6 routers present
[  146.625973] start_capture: pause_th:12, resume_th:5
[  146.872919] crystalhd 0000:02:00.0: [FMT CH] PIB:0 0 420 1 500 220 500 0 0 0
[  146.952110] Invalid Line Number[80808080]
[  146.968629] Invalid Line Number[80808080]
[  146.984556] crystalhd 0000:02:00.0: MISSING 3 PICTURES
[  147.475512] crystalhd 0000:02:00.0: list_index:1 rx[1] rxtot[30] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  246.184589] crystalhd 0000:02:00.0: list_index:0 rx[2] rxtot[39] Y:2 UV:2 Int:28 YDnSz:0 UVDnSz:0
[  246.316691] crystalhd 0000:02:00.0: list_index:1 rx[3] rxtot[44] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  247.410736] crystalhd 0000:02:00.0: list_index:1 rx[4] rxtot[46] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  247.767412] crystalhd 0000:02:00.0: list_index:1 rx[5] rxtot[48] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  247.787172] crystalhd 0000:02:00.0: MISSING 6 PICTURES
[  247.925677] crystalhd 0000:02:00.0: list_index:0 rx[6] rxtot[53] Y:2 UV:2 Int:28 YDnSz:0 UVDnSz:0
[  248.016545] crystalhd 0000:02:00.0: list_index:0 rx[7] rxtot[57] Y:2 UV:2 Int:28 YDnSz:0 UVDnSz:0
[  248.037076] crystalhd 0000:02:00.0: MISSING 2 PICTURES
[  248.427619] crystalhd 0000:02:00.0: list_index:1 rx[8] rxtot[64] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  248.428314] crystalhd 0000:02:00.0: MISSING 5 PICTURES
[  248.432114] crystalhd 0000:02:00.0: MISSING 68 PICTURES
[  249.400504] crystalhd 0000:02:00.0: list_index:0 rx[9] rxtot[67] Y:2 UV:2 Int:28 YDnSz:0 UVDnSz:0
[  249.401130] crystalhd 0000:02:00.0: MISSING 22 PICTURES
[  249.644586] crystalhd 0000:02:00.0: list_index:1 rx[10] rxtot[70] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  249.658102] crystalhd 0000:02:00.0: MISSING 6 PICTURES
[  249.857144] crystalhd 0000:02:00.0: list_index:1 rx[11] rxtot[74] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  249.861951] crystalhd 0000:02:00.0: MISSING 4 PICTURES
[  251.092788] crystalhd 0000:02:00.0: list_index:1 rx[12] rxtot[78] Y:10 UV:10 Int:2800 YDnSz:0 UVDnSz:0
[  251.104179] crystalhd 0000:02:00.0: MISSING 14 PICTURES
[  253.113940] crystalhd 0000:02:00.0: FETCH TIMEOUT
[  257.841294] crystalhd 0000:02:00.0: FETCH TIMEOUT
[  385.318653] crystalhd 0000:02:00.0: number of rx success 251 and failure 12