API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 14th, 2012
131
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.16 KB | None | 0 0
raw download clone embed print report
  1. ANDROID
  2. ▒▒HELLO! BOOT0 is starting!
  3. boot0 version : .3.0
  4. dram size =512
  5. Succeed in opening nand flash.
  6. Succeed in reading Boot1 file head.
  7. The size of Boot1 is 0x00036000.
  8. The file stored in 0X00000000 of block 2 is perfect.
  9. Check is correct.
  10. Ready to disable icache.
  11. Succeed in loading Boot1.
  12. Jump to Boot1.
  13. [ 0.142] boot1 version : 1.3.1b
  14. [ 0.142] pmu type = 3
  15. [ 0.143] bat vol = 0
  16. [ 0.170] axi:ahb:apb=3:2:2
  17. [ 0.170] set dcdc2=1400, clock=1008 successed
  18. [ 0.172] key
  19. [ 0.184] no key found
  20. [ 0.184] flash init start
  21. [ 1.557] flash init finish
  22. [ 1.558] fs init ok
  23. [ 1.559] fattype FAT16
  24. [ 1.559] fs mount ok
  25. [ 1.565] script finish
  26. [ 1.567] power finish
  27. [ 1.572] BootMain start
  28. [ 1.573] 0
  29. [ 1.586] key value = 0
  30. [ 1.586] recovery key high 6, low 4
  31. [ 1.587] unable to find fastboot_key key_max value
  32. [ 1.594] test for multi os boot with display
  33. [ 1.597] show pic finish
  34. [ 1.600] load kernel start
  35. [ 1.617] load kernel successed
  36. [ 1.617] start address = 0x4a000000
  37.  
  38. U-Boot 2011.09-rc1-00001-g137aa1c (May 17 2012 - 13:46:14) Allwinner Technology
  39.  
  40. CPU: SUNXI Family
  41. Board: A10-EVB
  42. DRAM: 512 MiB
  43. NAND: 3504 MiB
  44. In: serial
  45. Out: serial
  46. Err: serial
  47. --------fastboot partitions--------
  48. -total partitions:11-
  49. -name- -start- -size-
  50. bootloader : 100000 1000000
  51. env : 1100000 200000
  52. boot : 1300000 2000000
  53. system : 3300000 10000000
  54. data : 13300000 10000000
  55. misc : 23300000 100000
  56. recovery : 23400000 2000000
  57. cache : 25400000 8000000
  58. private : 2d400000 100000
  59. sysrecovery : 2d500000 14000000
  60. UDISK : 41500000 99b00000
  61. -----------------------------------
  62. Hit any key to stop autoboot: 0
  63.  
  64. NAND read: device 0 offset 0x1300000, size 0x2000000
  65. 33554432 bytes read: OK
  66.  
  67. Starting kernel ...
  68.  
  69. [ 0.000000] Linux version 3.0.8 (androidck@androidck-desktop) (gcc version 4.5.1 (Sourc2
  70. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  71. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  72. [ 0.000000] Machine: sun4i
  73. [ 0.000000] Total Detected Memory: 512MB with 1 banks
  74. [ 0.000000] Memory Reserved(in bytes):
  75. [ 0.000000] LCD: 0x5a000000, 0x02000000
  76. [ 0.000000] SYS: 0x43000000, 0x00010000
  77. [ 0.000000] G2D: 0x58000000, 0x01000000
  78. [ 0.000000] VE : 0x44000000, 0x05000000
  79. [ 0.000000] VE : 0x49000000, 0x01000000
  80. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  81. [ 0.000000] On node 0 totalpages: 114688
  82. [ 0.000000] free_area_init_node: node 0, pgdat c0803298, node_mem_map c09ca000
  83. [ 0.000000] Normal zone: 896 pages used for memmap
  84. [ 0.000000] Normal zone: 0 pages reserved
  85. [ 0.000000] Normal zone: 113792 pages, LIFO batch:31
  86. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  87. [ 0.000000] pcpu-alloc: [0] 0
  88. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  89. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandd init=/init loglev0
  90. [ 0.000000] MAC_ADDRESS: 00:00:00:00:00:00
  91. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  92. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  93. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  94. [ 0.000000] Memory: 448MB = 448MB total
  95. [ 0.000000] Memory: 312600k/312600k available, 146152k reserved, 0K highmem
  96. [ 0.000000] Virtual kernel memory layout:
  97. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  98. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  99. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  100. [ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
  101. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  102. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  103. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  104. [ 0.000000] .init : 0xc0008000 - 0xc0031000 ( 164 kB)
  105. [ 0.000000] .text : 0xc0031000 - 0xc07b70d0 (7705 kB)
  106. [ 0.000000] .data : 0xc07b8000 - 0xc080d5a0 ( 342 kB)
  107. [ 0.000000] .bss : 0xc080d5c4 - 0xc09c9eb8 (1779 kB)
  108. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  109. [ 0.000000] NR_IRQS:96 nr_irqs:96 96
  110. [ 0.000000] timer0: Periodic Mode
  111. [ 0.000000] sw_timer_init,line:397
  112. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  113. [ 0.000000] aw_clksrc_init, line:338
  114. [ 0.000000] Console: colour dummy device 80x30
  115. [ 0.000092] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  116. [ 0.040022] pid_max: default: 32768 minimum: 301
  117. [ 0.040146] Mount-cache hash table entries: 512
  118. [ 0.040434] CPU: Testing write buffer coherency: ok
  119. [ 0.040614] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  120. [ 0.041063] devtmpfs: initialized
  121. [ 0.042323] print_constraints: dummy:
  122. [ 0.042457] NET: Registered protocol family 16
  123. [ 0.042981] hw-breakpoint: debug architecture 0x4 unsupported.
  124. [ 0.043497] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  125. [ 0.043557] Initialize DMAC OK
  126. [ 0.049058] bio: create slab <bio-0> at 0
  127. [ 0.049623] SCSI subsystem initialized
  128. [ 0.049687] libata version 3.00 loaded.
  129. [ 0.049902] usbcore: registered new interface driver usbfs
  130. [ 0.049971] usbcore: registered new interface driver hub
  131. [ 0.050000] usbcore: registered new device driver usb
  132. [ 0.050000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  133. [ 0.050000] Bluetooth: Core ver 2.16
  134. [ 0.050000] NET: Registered protocol family 31
  135. [ 0.050000] Bluetooth: HCI device and connection manager initialized
  136. [ 0.050000] Bluetooth: HCI socket layer initialized
  137. [ 0.050000] Bluetooth: L2CAP socket layer initialized
  138. [ 0.050000] Bluetooth: SCO socket layer initialized
  139. [ 0.050000] cfg80211: Calling CRDA to update world regulatory domain
  140. [ 0.050000] Init eGon pin module V2.0
  141. [ 0.050000] Switching to clocksource aw 64bits couter
  142. [ 0.050000] FS-Cache: Loaded
  143. [ 0.050000] CacheFiles: Loaded
  144. [ 0.050000] Switched to NOHz mode on CPU #0
  145. [ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  146. [ 0.050000] [sw_hcd0]: usb host driver initialize........
  147. [ 0.050000] [sw_hcd0]: open_usb_clock
  148. [ 0.066382] [sw_hcd0]: host_init_state = 1
  149. [ 0.066391] [sw_hcd0]: platform is usb host
  150. [ 0.066447] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller a8
  151. [ 0.066471] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  152. [ 0.066487] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  153. [ 0.066993] hub 1-0:1.0: USB hub found
  154. [ 0.067018] hub 1-0:1.0: 1 port detected
  155. [ 0.067044] [sw_hcd_host0]: Set USB Power ON
  156. [ 0.067319] [sw_udc]: udc_init: version 20080411
  157. [ 0.067392] WRN:L3791(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: platform_driver_registerd
  158. [ 0.067711] NET: Registered protocol family 2
  159. [ 0.067827] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  160. [ 0.068052] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  161. [ 0.068327] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  162. [ 0.068510] TCP: Hash tables configured (established 16384 bind 16384)
  163. [ 0.068520] TCP reno registered
  164. [ 0.068530] UDP hash table entries: 256 (order: 0, 4096 bytes)
  165. [ 0.068548] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  166. [ 0.068717] NET: Registered protocol family 1
  167. [ 0.069020] RPC: Registered named UNIX socket transport module.
  168. [ 0.069032] RPC: Registered udp transport module.
  169. [ 0.069040] RPC: Registered tcp transport module.
  170. [ 0.069047] RPC: Registered tcp NFSv4.1 backchannel transport module.
  171. [ 0.069202] Trying to unpack rootfs image as initramfs...
  172. [ 0.143503] Freeing initrd memory: 960K
  173. [ 0.143609] [pm]aw_pm_init!
  174. [ 0.150557] ashmem: initialized
  175. [ 0.156148] VFS: Disk quotas dquot_6.5.2
  176. [ 0.156310] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  177. [ 0.159468] NTFS driver 2.1.30 [Flags: R/W].
  178. [ 0.159917] fuse init (API version 7.16)
  179. [ 0.160768] msgmni has been set to 612
  180. [ 0.161230] cryptomgr_test used greatest stack depth: 6712 bytes left
  181. [ 0.161649] cryptomgr_test used greatest stack depth: 6480 bytes left
  182. [ 0.163723] cryptomgr_test used greatest stack depth: 6388 bytes left
  183. [ 0.164754] cryptomgr_test used greatest stack depth: 6312 bytes left
  184. [ 0.165231] alg: No test for stdrng (krng)
  185. [ 0.165443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  186. [ 0.165457] io scheduler noop registered
  187. [ 0.165468] io scheduler deadline registered
  188. [ 0.165542] io scheduler cfq registered (default)
  189. [ 0.166141] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  190. [ 0.188098] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  191. [ 0.827942] console [ttyS0] enabled
  192. [ 0.851910] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  193. [ 0.859330] G2D: drv_g2d_init
  194. [ 0.862356] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  195. [ 0.868098] G2D: head:d8000000,tail:d9000000
  196. [ 0.872418] G2D: Module initialized.major:251
  197. [ 0.877348] brd: module loaded
  198. [ 0.882501] loop: module loaded
  199. [ 0.885657] [NAND]nand driver, init.
  200. [ 0.889256] [NAND] nand gpio_request
  201. [ 0.892896] [NAND] nand driver version: 0x2 0x9
  202. [ 0.897521] nand interrupte register ok
  203. [ 0.901382] ret of NFC_ChangMode is 0
  204. [ 0.905126] dma_hdle is 0
  205. [ 0.907920] dma_hdle is 10000008
  206. [ 0.939902] The 0 disk name = bootloader, class name = DISK, disk size = 32768
  207. [ 0.947172] The 1 disk name = env, class name = DISK, disk size = 4096
  208. [ 0.953723] The 2 disk name = boot, class name = DISK, disk size = 65536
  209. [ 0.960440] The 3 disk name = system, class name = DISK, disk size = 524288
  210. [ 0.967395] The 4 disk name = data, class name = DISK, disk size = 524288
  211. [ 0.974194] The 5 disk name = misc, class name = DISK, disk size = 2048
  212. [ 0.980821] The 6 disk name = recovery, class name = DISK, disk size = 65536
  213. [ 0.987862] The 7 disk name = cache, class name = DISK, disk size = 262144
  214. [ 0.994748] The 8 disk name = private, class name = DISK, disk size = 2048
  215. [ 1.001642] The 9 disk name = sysrecovery, class name = DISK, disk size = 655360
  216. [ 1.009031] The 10 disk name = UDISK, class name = DISK, disk size = 13424640
  217. [ 1.016180] The 10 disk size = 13424640
  218. [ 1.020030] part total count = 11
  219. [ 1.024702] nanda:
  220. [ 1.028324] nandb: unknown partition table
  221. [ 1.034015] nandc: unknown partition table
  222. [ 1.039629] nandd: unknown partition table
  223. [ 1.153923] nande: unknown partition table
  224. [ 1.159568] nandf: unknown partition table
  225. [ 1.165199] nandg: unknown partition table
  226. [ 1.170771] nandh: unknown partition table
  227. [ 1.283825] nandi:
  228. [ 1.287386] nandj: unknown partition table
  229. [ 1.400569] nandk:
  230. [ 1.402837] benn: nand probe enter
  231. [ 1.406271] [NAND]nand driver, ok.
  232. [ 1.481115] SATA AHCI Phy Power Failed!!
  233. [ 1.555905] SATA AHCI Phy Calibration Failed!!
  234. [ 1.560371] err: gpio count < =0 ,gpio_count is: 0
  235. [ 1.565250] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  236. [ 1.572227] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  237. [ 1.577588] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platforme
  238. [ 1.586044] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  239. [ 1.594108] scsi0 : sw_ahci_platform
  240. [ 1.597988] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
  241. [ 1.606079] PPP generic driver version 2.4.2
  242. [ 1.610686] PPP Deflate Compression module registered
  243. [ 1.615738] PPP BSD Compression module registered
  244. [ 1.621511] PPP MPPE Compression module registered
  245. [ 1.626305] NET: Registered protocol family 24
  246. [ 1.630915] PPTP driver version 0.8.5
  247. [ 1.634846] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
  248. [ 1.642538] [EMAC] ahb clk enable
  249. [ 1.645941] [EMAC] ahb gate clk: 0x2026041
  250. [ 1.660252] wemac wemac.0: PHY SETUP, reg 0 value: 3100
  251. [ 1.666469] wemac wemac.0: resetting device
  252. [ 1.671422] release temp resource
  253. [ 1.674787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  254. [ 1.681384] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  255. [ 1.687757] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc08bf7d4
  256. [ 1.695524] [sw-ehci1]: open clock
  257. [ 1.718878] [sw-ehci1]: Set USB Power ON
  258. [ 1.722821] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  259. [ 1.730333] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  260. [ 1.737467] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  261. [ 1.760054] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  262. [ 1.765453] ehci_irq: port change detect
  263. [ 1.769869] hub 2-0:1.0: USB hub found
  264. [ 1.773668] hub 2-0:1.0: 1 port detected
  265. [ 1.777899] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc08bf8e4
  266. [ 1.785669] [sw-ohci1]: open clock
  267. [ 1.809023] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  268. [ 1.816182] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  269. [ 1.823274] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  270. [ 1.884435] hub 3-0:1.0: USB hub found
  271. [ 1.888197] hub 3-0:1.0: 1 port detected
  272. [ 1.892467] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc08bf9f8
  273. [ 1.900270] [sw-ehci2]: open clock
  274. [ 1.923646] [sw-ehci2]: Set USB Power ON
  275. [ 1.927569] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  276. [ 1.935081] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  277. [ 1.942233] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  278. [ 1.960055] ata1: SATA link down (SStatus 0 SControl 300)
  279. [ 1.965504] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  280. [ 1.971016] ehci_irq: port change detect
  281. [ 1.975362] hub 4-0:1.0: USB hub found
  282. [ 1.979121] hub 4-0:1.0: 1 port detected
  283. [ 1.983348] [sw-ehci2]: sw_usb_disable_ehci
  284. [ 1.987533] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc08bf9f8
  285. [ 1.995426] sw-ehci sw-ehci.2: remove, state 1
  286. [ 1.999877] usb usb4: USB disconnect, device number 1
  287. [ 2.005587] sw-ehci sw-ehci.2: USB bus 4 deregistered
  288. [ 2.010677] [sw-ehci2]: Set USB Power OFF
  289. [ 2.014688] [sw-ehci2]: close clock
  290. [ 2.018302] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc08bfb08
  291. [ 2.026069] [sw-ohci2]: open clock
  292. [ 2.049533] [sw-ohci2]: Set USB Power ON
  293. [ 2.053477] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  294. [ 2.060639] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  295. [ 2.067711] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  296. [ 2.090058] usb 2-1: new high speed USB device number 2 using sw-ehci
  297. [ 2.134426] hub 4-0:1.0: USB hub found
  298. [ 2.138252] hub 4-0:1.0: 1 port detected
  299. [ 2.142439] [sw-ohci2]: sw_usb_disable_ohci
  300. [ 2.146623] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc08bfb08
  301. [ 2.154480] sw-ohci sw-ohci.2: remove, state 1
  302. [ 2.158937] usb usb4: USB disconnect, device number 1
  303. [ 2.164352] sw-ohci sw-ohci.2: USB bus 4 deregistered
  304. [ 2.169406] [sw-ohci2]: Set USB Power OFF
  305. [ 2.173441] [sw-ohci2]: close clock
  306. [ 2.176967] Initializing USB Mass Storage driver...
  307. [ 2.181999] usbcore: registered new interface driver usb-storage
  308. [ 2.188000] USB Mass Storage support registered.
  309. [ 2.192777] usbcore: registered new interface driver ums-alauda
  310. [ 2.198729] usbcore: registered new interface driver ums-cypress
  311. [ 2.204813] usbcore: registered new interface driver ums-datafab
  312. [ 2.210878] usbcore: registered new interface driver ums_eneub6250
  313. [ 2.217087] usbcore: registered new interface driver ums-freecom
  314. [ 2.223148] usbcore: registered new interface driver ums-isd200
  315. [ 2.229098] usbcore: registered new interface driver ums-jumpshot
  316. [ 2.235248] usbcore: registered new interface driver ums-karma
  317. [ 2.241136] usbcore: registered new interface driver ums-onetouch
  318. [ 2.247275] usbcore: registered new interface driver ums-realtek
  319. [ 2.253385] usbcore: registered new interface driver ums-sddr09
  320. [ 2.259344] usbcore: registered new interface driver ums-sddr55
  321. [ 2.265324] usbcore: registered new interface driver ums-usbat
  322. [ 2.271295] usbcore: registered new interface driver usbserial
  323. [ 2.277123] usbserial: USB Serial Driver core
  324. [ 2.281537] USB Serial support registered for GSM modem (1-port)
  325. [ 2.328423] scsi1 : usb-storage 2-1:1.0
  326. [ 2.332942] usbcore: registered new interface driver option
  327. [ 2.338512] option: v0.7.2:USB Driver for GSM modems
  328. [ 2.343582] ------print_msc_config-----
  329. [ 2.347416] vendor_id = 0x18d1
  330. [ 2.351530] mass_storage_id = 0x1
  331. [ 2.355362] adb_id = 0x2
  332. [ 2.359193] usb_manufacturer_name = USB Developer
  333. [ 2.363912] usb_product_name = Android
  334. [ 2.368090] usb_serial_number = 20080411
  335. [ 2.372374] msc_vendor_name = USB 2.0
  336. [ 2.376551] msc_product_name = USB Flash Driver
  337. [ 2.381530] msc_release = 100
  338. [ 2.385361] luns = 3
  339. [ 2.389019] ---------------------------
  340. [ 2.393007] WRN:L3038(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: udc is null
  341. [ 2.400071] mousedev: PS/2 mouse device common for all mice
  342. [ 2.405929] input: sun4i-keyboard as /devices/virtual/input/input0
  343. [ 2.412290] ==register_early_suspend =
  344. [ 2.416618] sunxi RTC version 0.1
  345. [ 2.420215] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  346. [ 2.426697] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  347. [ 2.431512] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:7
  348. [ 2.437120] using rtc device, rtc, for alarms
  349. [ 2.441353] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  350. [ 2.447667] i2c /dev entries driver
  351. [ 2.451282] !!! base_Addr = 0xdc914c00
  352. [ 2.455125] config i2c gpio with gpio_config api
  353. [ 2.459863] twi0, apb clock = 24000000
  354. [ 2.465099] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  355. [ 2.471563] I2C: i2c-0: AW16XX I2C adapter
  356. [ 2.475657] **********start************
  357. [ 2.479489] 0x40
  358. [ 2.481440] 0xf8
  359. [ 2.483363] 0x28
  360. [ 2.485285] 0x0
  361. [ 2.487121] 0x0
  362. [ 2.488957] **********end************
  363. [ 2.492671] !!! base_Addr = 0xdc916000
  364. [ 2.496547] twi1, apb clock = 24000000
  365. [ 2.500616] I2C: i2c-1: AW16XX I2C adapter
  366. [ 2.504709] **********start************
  367. [ 2.508540] 0x40
  368. [ 2.510489] 0xf8
  369. [ 2.512412] 0x58
  370. [ 2.514334] 0x0
  371. [ 2.516170] 0x0
  372. [ 2.518006] **********end************
  373. [ 2.521714] !!! base_Addr = 0xdc918400
  374. [ 2.525580] twi2, apb clock = 24000000
  375. [ 2.529618] I2C: i2c-2: AW16XX I2C adapter
  376. [ 2.533738] **********start************
  377. [ 2.537570] 0x40
  378. [ 2.539492] 0xf8
  379. [ 2.541444] 0x58
  380. [ 2.543366] 0x0
  381. [ 2.545203] 0x0
  382. [ 2.547039] **********end************
  383. [ 2.550850] lirc_dev: IR Remote Control driver registered, major 250
  384. [ 2.557289] IR NEC protocol handler initialized
  385. [ 2.561839] IR RC5(x) protocol handler initialized
  386. [ 2.566626] IR RC6 protocol handler initialized
  387. [ 2.571171] IR JVC protocol handler initialized
  388. [ 2.575697] IR Sony protocol handler initialized
  389. [ 2.580328] IR RC5 (streamzap) protocol handler initialized
  390. [ 2.585894] IR LIRC bridge handler initialized
  391. [ 2.590351] Linux video capture interface: v2.00
  392. [ 2.595108] usbcore: registered new interface driver uvcvideo
  393. [ 2.600878] USB Video Class driver (v1.1.0)
  394. [ 2.605094] [cedar dev]: install start!!!
  395. [ 2.609472] [cedar dev]: install end!!!
  396. [ 2.613340] [ace_drv] start!!!
  397. [ 2.616656] [ace_drv] init end!!!
  398. [ 2.619970] [pa_drv] start!!!
  399. [ 2.623201] [pa_drv] init end!!!
  400. [ 2.626538] print_constraints: axp20_ldo1: 1300 mV
  401. [ 2.632404] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  402. [ 2.640054] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  403. [ 2.647594] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  404. [ 2.655243] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  405. [ 2.662909] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  406. [ 2.670025] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  407. [ 2.677160] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-s1
  408. [ 2.693264] pmu_pekoff_time = 6000
  409. [ 2.696665] pmu_pekoff_en = 1
  410. [ 2.699629] pmu_peklong_time = 1000
  411. [ 2.703136] pmu_pekon_time = 1000
  412. [ 2.706448] pmu_pwrok_time = 64
  413. [ 2.709585] pmu_pwrnoe_time = 2000
  414. [ 2.713002] pmu_intotp_en = 1
  415. [ 2.716449] [AXP]POWER20_OFF_CTL:1908-->0x42
  416. [ 2.721214] POWER20_PEK_SET:1925-->0x8d
  417. [ 2.725524] POWER20_PEK_SET:1936-->0x8d
  418. [ 2.729834] POWER20_PEK_SET:1945-->0x8d
  419. [ 2.734164] POWER20_PEK_SET:1956-->0x8d
  420. [ 2.738476] POWER20_PEK_SET:1968-->0x8d
  421. [ 2.742809] POWER20_HOTOVER_CTL:1977-->0xad
  422. [ 2.750626] [AXP]last_rest_vol = 0, now_rest_vol = 100
  423. [ 2.757317] [AXP]Cur_CoulombCounter = 0
  424. [ 2.761173] [AXP]charger->rest_vol = 100
  425. [ 2.768007] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redham
  426. [ 2.776888] device-mapper: multipath: version 1.3.0 loaded
  427. [ 2.782431] device-mapper: multipath round-robin: version 1.0.0 loaded
  428. [ 2.788954] device-mapper: multipath queue-length: version 0.1.0 loaded
  429. [ 2.795592] device-mapper: multipath service-time: version 0.2.0 loaded
  430. [ 2.802506] Bluetooth: HCI UART driver ver 2.2
  431. [ 2.806950] Bluetooth: HCI H4 protocol initialized
  432. [ 2.811765] Bluetooth: HCI BCSP protocol initialized
  433. [ 2.816725] Bluetooth: HCILL protocol initialized
  434. [ 2.821656] [mmc_pm]: no sdio card used in configuration
  435. [ 2.826964] [mmc]: sunximmc_init
  436. [ 2.830505] [mmc]: sunxi mmc controller using config : 0xb
  437. [ 2.836047] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  438. [ 2.842544] [mmc]: mmc 0 power off !!
  439. [ 2.846308] [mmc]: mmc0 Probe: base:0xdc920000 irq:32 dma:0 pdes:0xd92e8000, ret 0.
  440. [ 2.854011] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  441. [ 2.860443] [mmc]: mmc 1 power off !!
  442. [ 2.864173] [mmc]: mmc1 Probe: base:0xdc922000 irq:33 dma:0 pdes:0xd92ec000, ret 0.
  443. [ 2.871865] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  444. [ 2.878253] [mmc]: mmc 3 power off !!
  445. [ 2.882014] [mmc]: mmc3 Probe: base:0xdc924000 irq:35 dma:0 pdes:0xd92f0000, ret 0.
  446. [ 2.890376] usbcore: registered new interface driver usbhid
  447. [ 2.895944] usbhid: USB HID core driver
  448. [ 2.899821] usbcore: registered new interface driver usb_wireless_remote
  449. [ 2.906543] usb_wireless_remote: 20080411:USB 2.4G Wireless Receiver
  450. [ 2.913310] logger: created 256K log 'log_main'
  451. [ 2.917930] logger: created 256K log 'log_events'
  452. [ 2.922781] logger: created 256K log 'log_radio'
  453. [ 2.927477] logger: created 256K log 'log_system'
  454. [ 2.932568] usbcore: registered new interface driver snd-usb-audio
  455. [ 2.939162] enter sun4i Audio codec!!!
  456. [ 2.943620] sun4i audio support initialized
  457. [ 2.947898] audiocodec_adap_awxx_init: script_parser_fetch err.
  458. [ 2.954070] sun4i Audio codec successfully loaded..
  459. [ 2.959834] soc_new_pcm,line:2112
  460. [ 2.963438] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  461. [ 2.969257] ALSA device list:
  462. [ 2.972258] #0: sun4i-CODEC Audio Codec
  463. [ 2.976349] #1: sun4i-sndhdmi
  464. [ 2.979737] Netfilter messages via NETLINK v0.30.
  465. [ 2.984532] nf_conntrack version 0.5.0 (4899 buckets, 19596 max)
  466. [ 2.991007] ctnetlink v0.93: registering with nfnetlink.
  467. [ 2.996320] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  468. [ 3.003314] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  469. [ 3.009380] IPv4 over IPv4 tunneling driver
  470. [ 3.013901] GRE over IPv4 demultiplexor driver
  471. [ 3.018171] GRE over IPv4 tunneling driver
  472. [ 3.022958] ip_tables: (C) 2000-2006 Netfilter Core Team
  473. [ 3.028427] TCP cubic registered
  474. [ 3.031685] Initializing XFRM netlink socket
  475. [ 3.036678] NET: Registered protocol family 10
  476. [ 3.042006] ip6_tables: (C) 2000-2006 Netfilter Core Team
  477. [ 3.047547] IPv6 over IPv4 tunneling driver
  478. [ 3.052575] NET: Registered protocol family 17
  479. [ 3.057049] NET: Registered protocol family 15
  480. [ 3.061679] Bluetooth: RFCOMM TTY layer initialized
  481. [ 3.066563] Bluetooth: RFCOMM socket layer initialized
  482. [ 3.071776] Bluetooth: RFCOMM ver 1.11
  483. [ 3.075524] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  484. [ 3.080853] Bluetooth: BNEP filters: protocol multicast
  485. [ 3.086078] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  486. [ 3.092104] L2TP core driver, V2.0
  487. [ 3.095521] PPPoL2TP kernel driver, V2.0
  488. [ 3.099442] L2TP IP encapsulation support (L2TPv3)
  489. [ 3.104343] L2TP netlink interface
  490. [ 3.107768] L2TP ethernet pseudowire support (L2TPv3)
  491. [ 3.113243] [mmc_pm]: No sdio card, please check your config !!
  492. [ 3.119200] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  493. [ 3.127277] dram_sysdev_init finished!
  494. [ 3.131962] [LCD] lcd_module_init
  495. [ 3.198871] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  496. [ 3.206921] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  497. [ 3.214964] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  498. [ 3.222960] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  499. [ 3.230901] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  500. [ 3.238816] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  501. [ 3.246550] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  502. [ 3.251363] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:8
  503. [ 3.256774] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:08 UTC (12623)
  504. [ 3.265610] Freeing init memory: 164K
  505. [ 3.271794] init: could not import file init.sun4i.usb.rc
  506. [ 3.329290] init: to sleep 1 seconds.
  507. [ 3.342205] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
  508. [ 3.352516] usb-stor-scan used greatest stack depth: 5808 bytes left
  509. [ 4.333329] init: has waken up.
  510. [ 4.336528] init: [william] hdmistatus = 0!
  511. [ 4.340764] init: [william] tvstatus = 0!
  512. [ 4.345198] init: width = 1280
  513. [ 4.348261] init: height = 720
  514. [ 4.351380] init: s.st_size = 3686400
  515. [ 4.361424] sd 1:0:0:0: [sda] 3891200 512-byte logical blocks: (1.99 GB/1.85 GiB)
  516. [ 4.380126] sd 1:0:0:0: [sda] Write Protect is off
  517. [ 4.384941] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
  518. [ 4.392802] sd 1:0:0:0: [sda] No Caching mode page present
  519. [ 4.392817] sd 1:0:0:0: [sda] Assuming drive cache: write through
  520. [ 4.395876] sd 1:0:0:0: [sda] No Caching mode page present
  521. [ 4.395891] sd 1:0:0:0: [sda] Assuming drive cache: write through
  522. [ 4.432759] sda: sda1
  523. [ 4.436890] init: command 'loglevel' r=0
  524. [ 4.441032] init: command 'export' r=0
  525. [ 4.444839] init: command 'export' r=0
  526. [ 4.448635] init: command 'export' r=0
  527. [ 4.452445] init: command 'export' r=0
  528. [ 4.456300] init: command 'export' r=0
  529. [ 4.460128] init: command 'export' r=0
  530. [ 4.463920] init: command 'export' r=0
  531. [ 4.467685] init: command 'export' r=0
  532. [ 4.471510] sd 1:0:0:0: [sda] No Caching mode page present
  533. [ 4.477000] sd 1:0:0:0: [sda] Assuming drive cache: write through
  534. [ 4.483133] init: command 'export' r=0
  535. [ 4.486937] init: command 'symlink' r=0
  536. [ 4.490837] init: command 'symlink' r=0
  537. [ 4.494714] init: command 'symlink' r=0
  538. [ 4.498567] init: command 'mkdir' r=0
  539. [ 4.502258] sd 1:0:0:0: [sda] Attached SCSI removable disk
  540. [ 4.508195] init: command 'mount' r=-1
  541. [ 4.512065] init: command 'mkdir' r=0
  542. [ 4.515761] init: command 'mkdir' r=0
  543. [ 4.519446] init: command 'mkdir' r=0
  544. [ 4.523178] init: command 'mkdir' r=0
  545. [ 4.526871] init: command 'mkdir' r=0
  546. [ 4.530624] init: command 'mkdir' r=0
  547. [ 4.534313] init: command 'mkdir' r=0
  548. [ 4.538000] init: command 'mkdir' r=0
  549. [ 4.541710] init: command 'mkdir' r=0
  550. [ 4.545484] init: command 'mount' r=0
  551. [ 4.549172] init: command 'mkdir' r=0
  552. [ 4.552936] init: command 'mount' r=0
  553. [ 4.556695] init: command 'write' r=0
  554. [ 4.560460] init: command 'write' r=-2
  555. [ 4.564266] init: command 'write' r=0
  556. [ 4.567966] init: command 'write' r=0
  557. [ 4.571736] init: command 'write' r=0
  558. [ 4.575450] init: command 'write' r=-2
  559. [ 4.579246] init: command 'write' r=0
  560. [ 4.582984] init: command 'mkdir' r=0
  561. [ 4.586953] init: command 'mount' r=-1
  562. [ 4.590796] init: command 'chown' r=0
  563. [ 4.594486] init: command 'chown' r=-2
  564. [ 4.598248] init: command 'chmod' r=-2
  565. [ 4.602136] init: command 'write' r=0
  566. [ 4.605822] init: command 'mkdir' r=0
  567. [ 4.609507] init: command 'chown' r=-2
  568. [ 4.613315] init: command 'chmod' r=-2
  569. [ 4.617109] init: command 'write' r=0
  570. [ 4.620828] init: command 'mkdir' r=0
  571. [ 4.624505] init: command 'chown' r=-2
  572. [ 4.628275] init: command 'chmod' r=-2
  573. [ 4.632102] init: command 'write' r=0
  574. [ 4.635777] init: command 'chmod' r=0
  575. [ 4.639458] init: processing action 0x2ff00 (fs)
  576. [ 4.653428] EXT4-fs (nandd): barriers disabled
  577. [ 4.666879] EXT4-fs (nandd): recovery complete
  578. [ 4.671513] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
  579. [ 4.679572] init: command 'mount' r=0
  580. [ 4.683335] init: command 'wait' r=0
  581. [ 4.696395] EXT4-fs (nande): barriers disabled
  582. [ 6.624051] EXT4-fs (nande): recovery complete
  583. [ 6.628575] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
  584. [ 6.636750] init: command 'mount' r=0
  585. [ 6.640584] init: command 'setupfs' r=0
  586. [ 6.644441] init: do_umount: /data
  587. [ 6.650126] init: command 'umount' r=0
  588. [ 6.735410] e2fsck used greatest stack depth: 5708 bytes left
  589. [ 6.741691] init: command 'exec' r=0
  590. [ 6.794937] EXT4-fs (nande): barriers disabled
  591. [ 6.800678] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0c
  592. [ 6.811879] init: command 'exec' r=0
  593. [ 6.824253] EXT4-fs (nandh): barriers disabled
  594. [ 6.948472] EXT4-fs (nandh): recovery complete
  595. [ 6.953014] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
  596. [ 6.961089] init: command 'mount' r=0
  597. [ 6.964868] init: command 'setupfs' r=0
  598. [ 6.968710] init: do_umount: /cache
  599. [ 6.980102] init: command 'umount' r=0
  600. [ 6.996503] init: command 'exec' r=0
  601. [ 7.010790] EXT4-fs (nandh): barriers disabled
  602. [ 7.016474] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0c
  603. [ 7.027684] init: command 'exec' r=0
  604. [ 7.032575] init: dont need format /dev/block/nandk
  605. [ 7.037289] init: command 'format_userdata' r=1
  606. [ 7.042099] init: command 'export' r=0
  607. [ 7.046975] init: dont need format /dev/block/nandi
  608. [ 7.051736] init: command 'format_userdata' r=1
  609. [ 7.056505] init: command 'mkdir' r=0
  610. [ 7.061550] init: command 'mount' r=0
  611. [ 7.065238] init: processing action 0x2b3f0 (post-fs)
  612. [ 7.070403] init: command 'chown' r=0
  613. [ 7.074093] init: command 'chmod' r=0
  614. [ 7.078690] init: command 'chown' r=-2
  615. [ 7.082483] init: command 'chmod' r=-2
  616. [ 7.086285] init: command 'chown' r=0
  617. [ 7.089974] init: command 'chmod' r=0
  618. [ 7.093694] init: command 'chown' r=0
  619. [ 7.097382] init: command 'chmod' r=0
  620. [ 7.101132] init: command 'chown' r=0
  621. [ 7.104819] init: command 'chmod' r=0
  622. [ 7.108552] init: command 'mkdir' r=0
  623. [ 7.112278] init: processing action 0x2b5e0 (post-fs-data)
  624. [ 7.117804] init: command 'chown' r=0
  625. [ 7.121533] init: command 'chmod' r=0
  626. [ 7.134073] init: command 'mkdir' r=0
  627. [ 7.137778] init: command 'copy' r=-1
  628. [ 7.249533] init: command 'chown' r=-2
  629. [ 7.253325] init: command 'chmod' r=-2
  630. [ 7.257093] init: command 'copy' r=-1
  631. [ 7.260807] init: command 'chown' r=-2
  632. [ 7.264566] init: command 'chmod' r=-2
  633. [ 7.268339] init: command 'write' r=-2
  634. [ 7.272196] init: command 'mkdir' r=0
  635. [ 7.276861] init: command 'mkdir' r=0
  636. [ 7.280628] init: command 'mkdir' r=0
  637. [ 7.284345] init: command 'mkdir' r=0
  638. [ 7.288053] init: command 'mkdir' r=0
  639. [ 7.291792] init: command 'mkdir' r=0
  640. [ 7.295509] init: command 'mkdir' r=0
  641. [ 7.299219] init: command 'mkdir' r=0
  642. [ 7.303864] init: command 'mkdir' r=0
  643. [ 7.307576] init: command 'chmod' r=0
  644. [ 7.311330] init: command 'mkdir' r=0
  645. [ 7.315014] init: command 'chown' r=0
  646. [ 7.318724] init: command 'mkdir' r=0
  647. [ 7.322469] init: command 'chmod' r=0
  648. [ 7.327100] init: command 'chmod' r=0
  649. [ 7.330857] init: command 'chmod' r=0
  650. [ 7.334557] init: command 'chmod' r=0
  651. [ 7.338258] init: command 'chmod' r=0
  652. [ 7.342020] init: command 'mkdir' r=0
  653. [ 7.346631] init: command 'mkdir' r=0
  654. [ 7.350397] init: command 'mkdir' r=0
  655. [ 7.354108] init: command 'mkdir' r=0
  656. [ 7.357818] init: command 'mkdir' r=0
  657. [ 7.361578] init: command 'mkdir' r=0
  658. [ 7.365287] init: command 'mkdir' r=0
  659. [ 7.368994] init: command 'mkdir' r=0
  660. [ 7.372739] init: command 'mkdir' r=0
  661. [ 7.376431] init: command 'chown' r=0
  662. [ 7.380136] init: command 'chmod' r=0
  663. [ 7.383845] init: command 'mkdir' r=0
  664. [ 7.387559] init: command 'mkdir' r=0
  665. [ 7.391342] init: command 'chown' r=-2
  666. [ 7.395139] init: command 'chmod' r=-2
  667. [ 7.398920] init: command 'chown' r=-2
  668. [ 7.402729] init: command 'chmod' r=-2
  669. [ 7.406484] init: processing action 0x30978 (property_service_init)
  670. [ 7.416627] init: Created socket '/dev/socket/property_service' with mode '666', user ''
  671. [ 7.425842] init: command 'property_service_init' r=0
  672. [ 7.430954] init: processing action 0x309c0 (signal_init)
  673. [ 7.436409] init: command 'signal_init' r=0
  674. [ 7.440639] init: processing action 0x30a08 (check_startup)
  675. [ 7.446247] init: command 'check_startup' r=0
  676. [ 7.450634] init: processing action 0x2bdd0 (boot)
  677. [ 7.464960] init: command 'chown' r=0
  678. [ 7.468659] init: command 'chmod' r=0
  679. [ 7.472866] init: command 'ifup' r=0
  680. [ 7.476549] init: command 'hostname' r=0
  681. [ 7.480558] init: command 'domainname' r=0
  682. [ 7.484669] init: command 'setrlimit' r=0
  683. [ 7.488724] init: command 'write' r=0
  684. [ 7.492474] init: command 'write' r=0
  685. [ 7.496245] init: command 'chown' r=0
  686. [ 7.499931] init: command 'chmod' r=0
  687. [ 7.503661] init: command 'chown' r=0
  688. [ 7.507343] init: command 'chmod' r=0
  689. [ 7.511099] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj i.
  690. [ 7.519714] init: command 'write' r=0
  691. [ 7.523446] init: command 'write' r=0
  692. [ 7.527148] init: command 'write' r=0
  693. [ 7.530855] init: command 'chown' r=-2
  694. [ 7.534619] init: command 'chown' r=-2
  695. [ 7.538381] init: command 'chown' r=-2
  696. [ 7.542172] init: command 'chown' r=-2
  697. [ 7.545945] init: command 'chown' r=-2
  698. [ 7.549722] init: command 'chown' r=0
  699. [ 7.553433] init: command 'chown' r=0
  700. [ 7.557122] init: command 'chown' r=0
  701. [ 7.560890] init: command 'chmod' r=0
  702. [ 7.564570] init: command 'chmod' r=0
  703. [ 7.568246] init: command 'chmod' r=0
  704. [ 7.572014] init: command 'chown' r=0
  705. [ 7.575706] init: command 'chmod' r=0
  706. [ 7.579411] init: command 'chown' r=-2
  707. [ 7.583231] init: command 'chown' r=-2
  708. [ 7.586997] init: command 'chown' r=-2
  709. [ 7.590803] init: command 'chown' r=-2
  710. [ 7.594577] init: command 'chown' r=-2
  711. [ 7.598341] init: command 'chown' r=-2
  712. [ 7.602130] init: command 'chown' r=-2
  713. [ 7.605896] init: command 'chown' r=-2
  714. [ 7.609667] init: command 'chown' r=-2
  715. [ 7.613456] init: command 'chown' r=-2
  716. [ 7.617220] init: command 'chown' r=-2
  717. [ 7.621008] init: command 'chown' r=-2
  718. [ 7.624772] init: command 'chown' r=-2
  719. [ 7.628543] init: command 'chown' r=-2
  720. [ 7.632330] init: command 'chown' r=-2
  721. [ 7.636095] init: command 'chown' r=-2
  722. [ 7.639858] init: command 'chown' r=-2
  723. [ 7.643652] init: command 'chown' r=-2
  724. [ 7.647434] init: command 'chown' r=-2
  725. [ 7.651249] init: command 'chown' r=0
  726. [ 7.654942] init: command 'chown' r=0
  727. [ 7.658635] init: command 'chown' r=0
  728. [ 7.662352] init: command 'chown' r=0
  729. [ 7.666037] init: command 'chown' r=0
  730. [ 7.669720] init: command 'chown' r=0
  731. [ 7.673441] init: command 'chown' r=0
  732. [ 7.677162] init: command 'setprop' r=0
  733. [ 7.681061] init: command 'setprop' r=0
  734. [ 7.684929] init: command 'setprop' r=0
  735. [ 7.688799] init: command 'setprop' r=0
  736. [ 7.692735] init: command 'setprop' r=0
  737. [ 7.696603] init: command 'setprop' r=0
  738. [ 7.700512] init: command 'setprop' r=0
  739. [ 7.704367] init: command 'setprop' r=0
  740. [ 7.708308] init: starting 'console'
  741. [ 7.712311] init: starting 'servicemanager'
  742. [ 7.716797] init: starting 'vold'
  743. [ 7.721750] init: command 'class_start' r=0
  744. [ 7.726737] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1'
  745. [ 7.735830] init: starting 'netd'
  746. [ 7.740468] init: starting 'debuggerd'
  747. [ 7.744769] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', gro'
  748. [ 7.754299] init: starting 'surfaceflinger'
  749. [ 7.759460] init: starting 'zygote'
  750. [ 7.763771] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1'
  751. [ 7.774241] init: starting 'drm'
  752. [ 7.780201] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '
  753. [ 7.788564] init: starting 'media'
  754. [ 7.794881] init: starting 'netshare'
  755. [ 7.800105] init: starting 'dbus'
  756. [ 7.804736] init: starting 'installd'
  757. [ 7.808785] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recov'
  758. [ 7.818789] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group'
  759. [ 7.827865] init: Created socket '/dev/socket/installd' with mode '600', user '1000', g'
  760. [ 7.837065] init: starting 'keystore'
  761. [ 7.841930] init: starting 'u3gmonitor'
  762. [ 7.848744] init: Created socket '/dev/socket/keystore' with mode '666', user '0', grou'
  763. [ 7.857855] init: starting 'ril-daemon'
  764. [ 7.863317] init: starting 'securefile'
  765. [ 7.867855] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001','
  766. [ 7.877875] init: starting 'isomountmanager'
  767. [ 7.884368] init: command 'class_start' r=0
  768. [ 7.891472] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1'
  769. [ 7.899949] init: processing action 0x30238 (boot)
  770. [ 7.973762] input: sun4i-ir as /devices/virtual/input/input2
  771. [ 7.979686] IR Initial OK
  772. [ 7.993706] ==register_early_suspend =
  773. [ 8.004088] init: command 'insmod' r=0
  774. [ 8.104972] UMP: UMP device driver loaded
  775. [ 8.110600] init: command 'insmod' r=0
  776. [ 8.349169] Mali: mali--2244-rel0!
  777. [ 8.355076] Mali: Mali device driver r2p4-02rel0 loaded
  778. [ 8.361167] init: command 'insmod' r=0
  779. [ 8.404851] init: command 'insmod' r=0
  780. [ 8.443672] usbcore: registered new interface driver asix
  781. [ 8.461287] init: command 'insmod' r=0
  782. [ 8.491133] usbcore: registered new interface driver qf9700
  783. [ 8.496935] init: command 'insmod' r=0
  784. [ 8.521606] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  785. [ 8.529243] init: command 'insmod' r=0
  786. [ 8.566910] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  787. [ 8.577507] usbcore: registered new interface driver rtl8150
  788. [ 8.588237] init: command 'insmod' r=0
  789. [ 8.611787] Registered gpio_sw device: PH10
  790. [ 8.616096] Registered gpio_sw device: PH20
  791. [ 8.621282] Registered gpio_sw device: PB3
  792. [ 8.625743] init: command 'insmod' r=0
  793. [ 8.651340] init: command 'insmod' r=0
  794. [ 8.674224] init: command 'insmod' r=0
  795. [ 8.707212] init: command 'insmod' r=0
  796. [ 8.734093] soc_new_pcm,line:2112
  797. [ 8.737824] asoc: sndspdif <-> sun4i-spdif.0 mapping ok
  798. [ 8.744826] init: command 'insmod' r=0
  799. [ 8.775919] usbcore: registered new interface driver cdc_ether
  800. [ 8.782003] init: command 'insmod' r=0
  801. [ 8.812434] usbcore: registered new interface driver cdc_eem
  802. [ 8.818311] init: command 'insmod' r=0
  803. [ 8.852721] usbcore: registered new interface driver cdc_subset
  804. [ 8.858819] init: command 'insmod' r=0
  805. [ 8.862722] init: command 'chmod' r=0
  806. [ 8.866656] init: command 'chown' r=0
  807. [ 8.870522] init: command 'chmod' r=0
  808. [ 8.874345] init: command 'chmod' r=0
  809. [ 8.878101] init: command 'chown' r=0
  810. [ 8.882005] init: command 'chown' r=0
  811. [ 8.885773] [mmc_pm]: No sdio card, please check your config !!
  812. [ 9.000245] init: command 'write' r=0
  813. [ 9.003979] init: command 'setprop' r=0
  814. [ 9.007832] init: processing action 0x30a50 (queue_propety_triggers)
  815. [ 9.058915] init: command 'queue_propety_triggers' r=0
  816. [ 9.091881] init: processing action 0x2c7d8 (nonencrypted)
  817. [ 9.120892] init: command 'class_start' r=0
  818. [ 9.170184] init: processing action 0x2cdc0 (property:persist.sys.usb.config=*)
  819. [ 9.177581] init: command 'setprop' r=0
  820. [ 9.270118] init: processing action 0x2cf90 (property:ro.debuggable=1)
  821. [ 9.276674] init: command 'start' r=0
  822. [ 10.080809] init: starting 'bootanim'
  823. [ 10.308905] init: waitpid returned pid 99, status = 00000000
  824. [ 10.308923] init: untracked pid 99 exited
  825. [ 17.519805] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  826. [ 22.490984] request_suspend_state: wakeup (3->0) at 22490948021 (2010-01-01 00:00:27.72)
  827. [ 22.825485] wemac wemac.0: enabling eth0
  828. [ 22.829900] wemac wemac.0: WARNING: no IRQ resource flags set.
  829. [ 22.829939] wemac wemac.0: resetting device
  830. [ 22.832120] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  831. [ 22.866273] init: starting 'dhcpcd_eth'
  832. [ 23.927154] netd used greatest stack depth: 5416 bytes left
  833. [ 27.240501] init: processing action 0x2e758 (property:sys.boot_completed=1)
  834. [ 27.339436] init: starting 'preinstall'
  835. [ 27.371377] init: command 'start' r=0
  836. [ 27.392473] init: waitpid returned pid 483, status = 00000100
  837. [ 27.464994] init: process 'preinstall', pid 483 exited
  838. [ 30.363988] init: service 'bootanim' is being killed
  839. [ 30.391222] init: waitpid returned pid 133, status = 00000009
  840. [ 30.397018] init: process 'bootanim', pid 133 exited
  841. [ 32.970040] eth0: no IPv6 routers present
  842. [ 36.533395] input: qwerty as /devices/virtual/input/input3
  843.  
  844.  
  845. 1|root@android:/data/local # ls /lib
  846. 130|root@android:/data/local # lsmod
  847. cdc_subset 1549 0 - Live 0xbf0a5000
  848. cdc_eem 2657 0 - Live 0xbf0a1000
  849. cdc_ether 6681 0 - Live 0xbf09b000
  850. sun4i_sndspdif 2601 0 - Live 0xbf097000
  851. sndspdif 2871 1 - Live 0xbf093000
  852. sun4i_spdma 4321 1 - Live 0xbf08e000
  853. sun4i_spdif 6383 1 - Live 0xbf089000
  854. gpio_sw 96389 0 - Live 0xbf06e000
  855. rtl8150 8910 0 - Live 0xbf067000
  856. mcs7830 6557 0 - Live 0xbf061000
  857. qf9700 8513 0 - Live 0xbf05a000
  858. asix 22500 0 - Live 0xbf04f000
  859. usbnet 23745 6 cdc_subset,cdc_eem,cdc_ether,mcs7830,qf9700,asix, Live 0xbf043000
  860. mali 130275 6 - Live 0xbf016000
  861. ump 42162 11 mali, Live 0xbf005000
  862. sun4i_ir 4344 0 - Live 0xbf000000
  863.  
  864. root@android:/system # lsusb -v
  865. Bus 001 Device 001: ID 1d6b:0001
  866. Bus 002 Device 001: ID 1d6b:0002
  867. Bus 003 Device 001: ID 1d6b:0001
  868.  
  869. root@android:/sys # ls module/sun4i_
  870. sun4i_cedar/ sun4i_sndspdif/ sun4i_spdma/
  871. sun4i_ir/ sun4i_spdif/ sun4i_wemac/
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!