API tools faq
paste
barjac

dmesg

barjac
Feb 4th, 2011
67
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 45.36 KB | None | 0 0
raw download clone embed print report
  1. Initializing cgroup subsys cpuset
  2. Initializing cgroup subsys cpu
  3. Linux version 2.6.36.2-desktop-2mnb (herton@celeste.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Wed Dec 22 16:47:21 UTC 2010
  4. Command line: BOOT_IMAGE=/boot/vmlinuz
  5. BIOS-provided physical RAM map:
  6. BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
  7. BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  8. BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
  9. BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
  10. BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
  11. BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
  12. BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
  13. BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
  14. NX (Execute Disable) protection: active
  15. DMI 2.3 present.
  16. AMI BIOS detected: BIOS may corrupt low RAM, working around it.
  17. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  18. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
  19. e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  20. AGP bridge at 00:00:00
  21. Aperture from AGP @ f8000000 old size 32 MB
  22. Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
  23. Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
  24. last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
  25. MTRR default type: uncachable
  26. MTRR fixed ranges enabled:
  27. 00000-9FFFF write-back
  28. A0000-EFFFF uncachable
  29. F0000-FFFFF write-protect
  30. MTRR variable ranges enabled:
  31. 0 base 0000000000 mask FFC0000000 write-back
  32. 1 disabled
  33. 2 disabled
  34. 3 disabled
  35. 4 disabled
  36. 5 disabled
  37. 6 disabled
  38. 7 disabled
  39. x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  40. initial memory mapped : 0 - 20000000
  41. init_memory_mapping: 0000000000000000-000000003ffb0000
  42. 0000000000 - 003fe00000 page 2M
  43. 003fe00000 - 003ffb0000 page 4k
  44. kernel direct mapping tables up to 3ffb0000 @ 16000-19000
  45. RAMDISK: 37804000 - 37bfa000
  46. ACPI: RSDP 00000000000f88c0 00014 (v00 ACPIAM)
  47. ACPI: RSDT 000000003ffb0000 00030 (v01 A_M_I OEMRSDT 07000716 MSFT 00000097)
  48. ACPI: FACP 000000003ffb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
  49. ACPI: DSDT 000000003ffb03f0 03F83 (v01 K8UNF K8UNF233 00000233 INTL 02002026)
  50. ACPI: FACS 000000003ffc0000 00040
  51. ACPI: APIC 000000003ffb0390 0005C (v01 A_M_I OEMAPIC 07000716 MSFT 00000097)
  52. ACPI: OEMB 000000003ffc0040 00056 (v01 A_M_I AMI_OEM 07000716 MSFT 00000097)
  53. ACPI: Local APIC address 0xfee00000
  54. Scanning NUMA topology in Northbridge 24
  55. No NUMA configuration found
  56. Faking a node at 0000000000000000-000000003ffb0000
  57. Initmem setup node 0 0000000000000000-000000003ffb0000
  58. NODE_DATA [00000000019670c0 - 000000000196c0bf]
  59. [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002200000-ffff880002ffffff] on node 0
  60. Zone PFN ranges:
  61. DMA 0x00000010 -> 0x00001000
  62. DMA32 0x00001000 -> 0x00100000
  63. Normal empty
  64. Movable zone start PFN for each node
  65. early_node_map[2] active PFN ranges
  66. 0: 0x00000010 -> 0x0000009f
  67. 0: 0x00000100 -> 0x0003ffb0
  68. On node 0 totalpages: 261951
  69. DMA zone: 56 pages used for memmap
  70. DMA zone: 0 pages reserved
  71. DMA zone: 3927 pages, LIFO batch:0
  72. DMA32 zone: 3527 pages used for memmap
  73. DMA32 zone: 254441 pages, LIFO batch:31
  74. Nvidia board detected. Ignoring ACPI timer override.
  75. If you got timer trouble try acpi_use_timer_override
  76. Detected use of extended apic ids on hypertransport bus
  77. ACPI: PM-Timer IO Port: 0x4008
  78. ACPI: Local APIC address 0xfee00000
  79. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  80. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
  81. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  82. IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
  83. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  84. ACPI: BIOS IRQ0 pin2 override ignored.
  85. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  86. ACPI: IRQ9 used by override.
  87. Using ACPI (MADT) for SMP configuration information
  88. SMP: Allowing 2 CPUs, 1 hotplug CPUs
  89. nr_irqs_gsi: 40
  90. PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  91. PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
  92. PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
  93. Allocating PCI resources starting at 40000000 (gap: 40000000:bf7c0000)
  94. Booting paravirtualized kernel on bare hardware
  95. early_res array is doubled to 64 at [170c0 - 178bf]
  96. setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
  97. PERCPU: Embedded 29 pages/cpu @ffff880001a00000 s87040 r8192 d23552 u1048576
  98. pcpu-alloc: s87040 r8192 d23552 u1048576 alloc=1*2097152
  99. pcpu-alloc: [0] 0 1
  100. Built 1 zonelists in Node order, mobility grouping on. Total pages: 258368
  101. Policy zone: DMA32
  102. Kernel command line: BOOT_IMAGE=/boot/vmlinuz
  103. PID hash table entries: 4096 (order: 3, 32768 bytes)
  104. Checking aperture...
  105. AGP bridge at 00:00:00
  106. Aperture from AGP @ f8000000 old size 32 MB
  107. Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
  108. Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
  109. Node 0: aperture @ f8000000 size 64 MB
  110. Subtract (40 early reservations)
  111. #1 [0001000000 - 0001966388] TEXT DATA BSS
  112. #2 [0037804000 - 0037bfa000] RAMDISK
  113. #3 [000009f400 - 0000100000] BIOS reserved
  114. #4 [0001967000 - 00019670a9] BRK
  115. #5 [0000010000 - 0000012000] TRAMPOLINE
  116. #6 [0000012000 - 0000016000] ACPI WAKEUP
  117. #7 [0000016000 - 0000017000] PGTABLE
  118. #8 [00019670c0 - 000196c0c0] NODE_DATA
  119. #9 [000196c0c0 - 000196d0c0] BOOTMEM
  120. #10 [0000017000 - 00000170c0] BOOTMEM
  121. #11 [000216e000 - 000216f000] BOOTMEM
  122. #12 [000216f000 - 0002170000] BOOTMEM
  123. #13 [0002200000 - 0003000000] MEMMAP 0
  124. #14 [000196d0c0 - 00019850c0] BOOTMEM
  125. #15 [00019850c0 - 000199d0c0] BOOTMEM
  126. #16 [000199e000 - 000199f000] BOOTMEM
  127. #17 [00019663c0 - 0001966403] BOOTMEM
  128. #18 [0001966440 - 0001966638] BOOTMEM
  129. #19 [0001966640 - 00019666a8] BOOTMEM
  130. #20 [00019666c0 - 0001966728] BOOTMEM
  131. #21 [0001966740 - 00019667a8] BOOTMEM
  132. #22 [00019667c0 - 0001966828] BOOTMEM
  133. #23 [0001966840 - 00019668a8] BOOTMEM
  134. #24 [00019668c0 - 0001966928] BOOTMEM
  135. #25 [0001966940 - 00019669a8] BOOTMEM
  136. #26 [00019669c0 - 0001966a28] BOOTMEM
  137. #27 [0001966a40 - 0001966a60] BOOTMEM
  138. #28 [0001966a80 - 0001966a99] BOOTMEM
  139. #29 [0001966ac0 - 0001966ad9] BOOTMEM
  140. #30 [0001a00000 - 0001a1d000] BOOTMEM
  141. #31 [0001b00000 - 0001b1d000] BOOTMEM
  142. #32 [0001966b00 - 0001966b08] BOOTMEM
  143. #33 [0001966b40 - 0001966b48] BOOTMEM
  144. #34 [0001966b80 - 0001966b88] BOOTMEM
  145. #35 [0001966bc0 - 0001966bd0] BOOTMEM
  146. #36 [0001966c00 - 0001966d40] BOOTMEM
  147. #37 [0001966d40 - 0001966da0] BOOTMEM
  148. #38 [0001966dc0 - 0001966e20] BOOTMEM
  149. #39 [000199f000 - 00019a7000] BOOTMEM
  150. Memory: 1019256k/1048256k available (4055k kernel code, 452k absent, 28548k reserved, 3261k data, 720k init)
  151. SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  152. Hierarchical RCU implementation.
  153. RCU-based detection of stalled CPUs is disabled.
  154. Verbose stalled-CPUs detection is disabled.
  155. NR_IRQS:2304
  156. spurious 8259A interrupt: IRQ7.
  157. Console: colour VGA+ 80x25
  158. console [tty0] enabled
  159. allocated 10485760 bytes of page_cgroup
  160. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  161. Fast TSC calibration using PIT
  162. Detected 2211.025 MHz processor.
  163. Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.05 BogoMIPS (lpj=2211025)
  164. pid_max: default: 32768 minimum: 301
  165. Security Framework initialized
  166. TOMOYO Linux initialized
  167. Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  168. Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  169. Mount-cache hash table entries: 256
  170. Initializing cgroup subsys ns
  171. Initializing cgroup subsys cpuacct
  172. Initializing cgroup subsys memory
  173. Initializing cgroup subsys devices
  174. Initializing cgroup subsys freezer
  175. Initializing cgroup subsys net_cls
  176. Initializing cgroup subsys blkio
  177. tseg: 0000000000
  178. mce: CPU supports 5 MCE banks
  179. Performance Events: AMD PMU driver.
  180. ... version: 0
  181. ... bit width: 48
  182. ... generic registers: 4
  183. ... value mask: 0000ffffffffffff
  184. ... max period: 00007fffffffffff
  185. ... fixed-purpose events: 0
  186. ... event mask: 000000000000000f
  187. SMP alternatives: switching to UP code
  188. ACPI: Checking initramfs for custom DSDT
  189. ACPI: Core revision 20100702
  190. ftrace: converting mcount calls to 0f 1f 44 00 00
  191. ftrace: allocating 16123 entries in 64 pages
  192. Setting APIC routing to flat
  193. ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  194. CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
  195. Brought up 1 CPUs
  196. Total of 1 processors activated (4422.05 BogoMIPS).
  197. devtmpfs: initialized
  198. Time: 18:08:17 Date: 02/04/11
  199. NET: Registered protocol family 16
  200. node 0 link 0: io port [1000, ffffff]
  201. TOM: 0000000040000000 aka 1024M
  202. node 0 link 0: mmio [a0000, bffff]
  203. node 0 link 0: mmio [40000000, fe0bffff]
  204. bus: [00, ff] on node 0 link 0
  205. bus: 00 index 0 [io 0x0000-0xffff]
  206. bus: 00 index 1 [mem 0x000a0000-0x000bffff]
  207. bus: 00 index 2 [mem 0x40000000-0xfcffffffff]
  208. ACPI: bus type pci registered
  209. PCI: Using configuration type 1 for base access
  210. bio: create slab <bio-0> at 0
  211. ACPI: EC: Look up EC in DSDT
  212. ACPI: Executed 1 blocks of module-level executable AML code
  213. ACPI: Interpreter enabled
  214. ACPI: (supports S0 S1 S4 S5)
  215. ACPI: Using IOAPIC for interrupt routing
  216. ACPI: Power Resource [ISAV] (on)
  217. ACPI: No dock devices found.
  218. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  219. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  220. pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
  221. pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
  222. pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  223. pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
  224. pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
  225. pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
  226. pci 0000:00:01.1: reg 10: [io 0x5080-0x509f]
  227. pci 0000:00:01.1: reg 20: [io 0x5000-0x503f]
  228. pci 0000:00:01.1: reg 24: [io 0x5040-0x507f]
  229. pci 0000:00:01.1: PME# supported from D3hot D3cold
  230. pci 0000:00:01.1: PME# disabled
  231. pci 0000:00:02.0: reg 10: [mem 0xfebff000-0xfebfffff]
  232. pci 0000:00:02.0: supports D1 D2
  233. pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  234. pci 0000:00:02.0: PME# disabled
  235. pci 0000:00:02.1: reg 10: [mem 0xfebfe000-0xfebfefff]
  236. pci 0000:00:02.1: supports D1 D2
  237. pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  238. pci 0000:00:02.1: PME# disabled
  239. pci 0000:00:02.2: reg 10: [mem 0xfebfdc00-0xfebfdcff]
  240. pci 0000:00:02.2: supports D1 D2
  241. pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
  242. pci 0000:00:02.2: PME# disabled
  243. pci 0000:00:05.0: reg 10: [mem 0xfebfc000-0xfebfcfff]
  244. pci 0000:00:05.0: reg 14: [io 0xec00-0xec07]
  245. pci 0000:00:05.0: supports D1 D2
  246. pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
  247. pci 0000:00:05.0: PME# disabled
  248. pci 0000:00:08.0: reg 20: [io 0xffa0-0xffaf]
  249. pci 0000:00:0a.0: reg 10: [io 0x0f80-0x0f87]
  250. pci 0000:00:0a.0: reg 14: [io 0x0f00-0x0f03]
  251. pci 0000:00:0a.0: reg 18: [io 0x0e80-0x0e87]
  252. pci 0000:00:0a.0: reg 1c: [io 0x0e00-0x0e03]
  253. pci 0000:00:0a.0: reg 20: [io 0xe000-0xe00f]
  254. pci 0000:00:0a.0: reg 24: [io 0xd800-0xd87f]
  255. PCI: peer root bus 00 res updated from pci conf
  256. pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
  257. pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff pref]
  258. pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
  259. pci 0000:00:0b.0: PCI bridge to [bus 01-01]
  260. pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
  261. pci 0000:00:0b.0: bridge window [mem 0xfc800000-0xfe8fffff]
  262. pci 0000:00:0b.0: bridge window [mem 0xe4700000-0xf46fffff pref]
  263. pci 0000:02:06.0: reg 10: [io 0xc880-0xc887]
  264. pci 0000:02:06.0: reg 14: [io 0xc800-0xc803]
  265. pci 0000:02:06.0: reg 18: [io 0xc480-0xc487]
  266. pci 0000:02:06.0: reg 1c: [io 0xc400-0xc403]
  267. pci 0000:02:06.0: reg 20: [io 0xc080-0xc08f]
  268. pci 0000:02:06.0: reg 24: [mem 0xfeaffc00-0xfeaffdff]
  269. pci 0000:02:06.0: reg 30: [mem 0xfea00000-0xfea7ffff pref]
  270. pci 0000:02:06.0: supports D1 D2
  271. pci 0000:02:07.0: reg 10: [io 0xc000-0xc03f]
  272. pci 0000:02:07.0: supports D1 D2
  273. pci 0000:02:07.1: reg 10: [io 0xcc00-0xcc07]
  274. pci 0000:02:07.1: supports D1 D2
  275. pci 0000:02:07.2: reg 10: [mem 0xfeaff000-0xfeaff7ff]
  276. pci 0000:02:07.2: reg 14: [mem 0xfeaf8000-0xfeafbfff]
  277. pci 0000:02:07.2: supports D1 D2
  278. pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot
  279. pci 0000:02:07.2: PME# disabled
  280. pci 0000:00:0e.0: PCI bridge to [bus 02-02]
  281. pci 0000:00:0e.0: bridge window [io 0xc000-0xcfff]
  282. pci 0000:00:0e.0: bridge window [mem 0xfe900000-0xfeafffff]
  283. pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  284. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  285. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  286. ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
  287. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
  288. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *9
  289. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11
  290. ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
  291. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
  292. ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5
  293. ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *3
  294. ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
  295. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
  296. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
  297. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
  298. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10
  299. ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
  300. ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
  301. HEST: Table is not found!
  302. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  303. vgaarb: loaded
  304. PCI: Using ACPI for IRQ routing
  305. PCI: pci_cache_line_size set to 64 bytes
  306. pci 0000:00:00.0: address space collision: [mem 0xf8000000-0xfbffffff pref] conflicts with GART [mem 0xf8000000-0xfbffffff]
  307. reserve RAM buffer: 000000000009f400 - 000000000009ffff
  308. reserve RAM buffer: 000000003ffb0000 - 000000003fffffff
  309. NetLabel: Initializing
  310. NetLabel: domain hash size = 128
  311. NetLabel: protocols = UNLABELED CIPSOv4
  312. NetLabel: unlabeled traffic allowed by default
  313. pnp: PnP ACPI init
  314. ACPI: bus type pnp registered
  315. pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
  316. pnp 00:0d: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
  317. pnp 00:0d: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
  318. pnp 00:0d: disabling [mem 0x00100000-0x3fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
  319. pnp: PnP ACPI: found 14 devices
  320. ACPI: ACPI bus type pnp unregistered
  321. system 00:07: [io 0x04d0-0x04d1] has been reserved
  322. system 00:07: [io 0x4000-0x407f] has been reserved
  323. system 00:07: [io 0x4080-0x40ff] has been reserved
  324. system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
  325. system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
  326. system 00:08: [mem 0xff7c0000-0xffffffff] has been reserved
  327. system 00:0c: [io 0x0290-0x029f] has been reserved
  328. Switching to clocksource acpi_pm
  329. pci 0000:00:0b.0: PCI bridge to [bus 01-01]
  330. pci 0000:00:0b.0: bridge window [io disabled]
  331. pci 0000:00:0b.0: bridge window [mem 0xfc800000-0xfe8fffff]
  332. pci 0000:00:0b.0: bridge window [mem 0xe4700000-0xf46fffff pref]
  333. pci 0000:00:0e.0: PCI bridge to [bus 02-02]
  334. pci 0000:00:0e.0: bridge window [io 0xc000-0xcfff]
  335. pci 0000:00:0e.0: bridge window [mem 0xfe900000-0xfeafffff]
  336. pci 0000:00:0e.0: bridge window [mem pref disabled]
  337. pci 0000:00:0e.0: setting latency timer to 64
  338. pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  339. pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
  340. pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff]
  341. pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfe8fffff]
  342. pci_bus 0000:01: resource 2 [mem 0xe4700000-0xf46fffff pref]
  343. pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
  344. pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfeafffff]
  345. NET: Registered protocol family 2
  346. IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
  347. TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
  348. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  349. TCP: Hash tables configured (established 131072 bind 65536)
  350. TCP reno registered
  351. UDP hash table entries: 512 (order: 2, 16384 bytes)
  352. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  353. NET: Registered protocol family 1
  354. pci 0000:01:00.0: Boot video device
  355. PCI: CLS 64 bytes, default 64
  356. Trying to unpack rootfs image as initramfs...
  357. Freeing initrd memory: 4056k freed
  358. agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
  359. agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
  360. agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
  361. agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
  362. audit: initializing netlink socket (disabled)
  363. type=2000 audit(1296842897.229:1): initialized
  364. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  365. VFS: Disk quotas dquot_6.5.2
  366. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  367. msgmni has been set to 1998
  368. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  369. io scheduler noop registered
  370. io scheduler deadline registered
  371. io scheduler cfq registered (default)
  372. ERST: Table is not found!
  373. Linux agpgart interface v0.103
  374. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  375. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  376. 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  377. brd: module loaded
  378. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  379. serio: i8042 KBD port at 0x60,0x64 irq 1
  380. serio: i8042 AUX port at 0x60,0x64 irq 12
  381. mice: PS/2 mouse device common for all mice
  382. rtc_cmos 00:02: RTC can wake from S4
  383. rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  384. rtc0: alarms up to one year, y3k, 114 bytes nvram
  385. cpuidle: using governor ladder
  386. cpuidle: using governor menu
  387. TCP cubic registered
  388. Registering the dns_resolver key type
  389. PM: Resume from disk failed.
  390. registered taskstats version 1
  391. Magic number: 15:248:139
  392. block ram4: hash matches
  393. acpi device:10: hash matches
  394. rtc_cmos 00:02: setting system clock to 2011-02-04 18:08:18 UTC (1296842898)
  395. BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  396. EDD information not available.
  397. Freeing unused kernel memory: 720k freed
  398. nash-hotplug (35): /proc/35/oom_adj is deprecated, please use /proc/35/oom_score_adj instead.
  399. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  400. logips2pp: Detected unknown logitech mouse model 63
  401. SCSI subsystem initialized
  402. libata version 3.00 loaded.
  403. sata_sil 0000:02:06.0: version 2.4
  404. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
  405. sata_sil 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
  406. scsi0 : sata_sil
  407. scsi1 : sata_sil
  408. ata1: SATA max UDMA/100 mmio m512@0xfeaffc00 tf 0xfeaffc80 irq 19
  409. ata2: SATA max UDMA/100 mmio m512@0xfeaffc00 tf 0xfeaffcc0 irq 19
  410. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  411. ata1.00: ATA-8: WDC WD10EAVS-32D7B1, 01.01A01, max UDMA/133
  412. ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  413. ata1.00: configured for UDMA/100
  414. scsi 0:0:0:0: Direct-Access ATA WDC WD10EAVS-32D 01.0 PQ: 0 ANSI: 5
  415. sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  416. sd 0:0:0:0: [sda] Write Protect is off
  417. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  418. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  419. sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 >
  420. sd 0:0:0:0: [sda] Attached SCSI disk
  421. ata2: SATA link down (SStatus 0 SControl 310)
  422. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  423. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  424. pata_amd 0000:00:08.0: version 0.4.1
  425. pata_amd 0000:00:08.0: power state changed by ACPI to D0
  426. pata_amd 0000:00:08.0: power state changed by ACPI to D0
  427. pata_amd 0000:00:08.0: setting latency timer to 64
  428. scsi2 : pata_amd
  429. scsi3 : pata_amd
  430. ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  431. ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  432. input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1
  433. ata4.00: ATAPI: ATAPI CDRW 52X32, Y.BS, max UDMA/33
  434. ata4.01: ATAPI: SONY DVD RW DRU-700A, VY02, max UDMA/33
  435. ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
  436. ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
  437. ata4.00: configured for UDMA/33
  438. ata4.01: configured for UDMA/33
  439. scsi 3:0:0:0: CD-ROM ATAPI CDRW 52X32 Y.BS PQ: 0 ANSI: 5
  440. scsi 3:0:1:0: CD-ROM SONY DVD RW DRU-700A VY02 PQ: 0 ANSI: 5
  441. sata_nv 0000:00:0a.0: version 3.5
  442. ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
  443. sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
  444. sata_nv 0000:00:0a.0: setting latency timer to 64
  445. scsi4 : sata_nv
  446. scsi5 : sata_nv
  447. ata5: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xe000 irq 22
  448. ata6: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xe008 irq 22
  449. ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  450. ata5.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
  451. ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  452. ata5.00: configured for UDMA/133
  453. scsi 4:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
  454. sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  455. sd 4:0:0:0: [sdb] Write Protect is off
  456. sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  457. sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  458. sdb: sdb1
  459. sd 4:0:0:0: [sdb] Attached SCSI disk
  460. ata6: SATA link down (SStatus 0 SControl 300)
  461. EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts:
  462. Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
  463. usbcore: registered new interface driver usbfs
  464. usbcore: registered new interface driver hub
  465. usbcore: registered new device driver usb
  466. udev: starting version 153
  467. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  468. ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
  469. ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
  470. ohci_hcd 0000:00:02.0: setting latency timer to 64
  471. ohci_hcd 0000:00:02.0: OHCI Host Controller
  472. ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
  473. ohci_hcd 0000:00:02.0: irq 21, io mem 0xfebff000
  474. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  475. Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
  476. usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  477. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  478. usb usb1: Product: OHCI Host Controller
  479. usb usb1: Manufacturer: Linux 2.6.36.2-desktop-2mnb ohci_hcd
  480. usb usb1: SerialNumber: 0000:00:02.0
  481. hub 1-0:1.0: USB hub found
  482. hub 1-0:1.0: 4 ports detected
  483. ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
  484. ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20
  485. ohci_hcd 0000:00:02.1: setting latency timer to 64
  486. ohci_hcd 0000:00:02.1: OHCI Host Controller
  487. ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
  488. ohci_hcd 0000:00:02.1: irq 20, io mem 0xfebfe000
  489. input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
  490. ACPI: Power Button [PWRB]
  491. input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  492. ACPI: Power Button [PWRF]
  493. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  494. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  495. usb usb2: Product: OHCI Host Controller
  496. usb usb2: Manufacturer: Linux 2.6.36.2-desktop-2mnb ohci_hcd
  497. usb usb2: SerialNumber: 0000:00:02.1
  498. hub 2-0:1.0: USB hub found
  499. hub 2-0:1.0: 4 ports detected
  500. ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
  501. ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
  502. ehci_hcd 0000:00:02.2: setting latency timer to 64
  503. ehci_hcd 0000:00:02.2: EHCI Host Controller
  504. ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
  505. ehci_hcd 0000:00:02.2: debug port 1
  506. ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
  507. ehci_hcd 0000:00:02.2: irq 22, io mem 0xfebfdc00
  508. ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
  509. usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  510. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  511. usb usb3: Product: EHCI Host Controller
  512. usb usb3: Manufacturer: Linux 2.6.36.2-desktop-2mnb ehci_hcd
  513. usb usb3: SerialNumber: 0000:00:02.2
  514. hub 3-0:1.0: USB hub found
  515. hub 3-0:1.0: 8 ports detected
  516. forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
  517. ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
  518. forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 21 (level, low) -> IRQ 21
  519. forcedeth 0000:00:05.0: setting latency timer to 64
  520. nv_probe: set workaround bit for reversed mac addr
  521. ACPI: acpi_idle registered with cpuidle
  522. sd 0:0:0:0: Attached scsi generic sg0 type 0
  523. sr 3:0:0:0: Attached scsi generic sg1 type 5
  524. scsi 3:0:1:0: Attached scsi generic sg2 type 5
  525. sd 4:0:0:0: Attached scsi generic sg3 type 0
  526. EDAC MC: Ver: 2.1.0 Dec 22 2010
  527. sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
  528. cdrom: Uniform CD-ROM driver Revision: 3.20
  529. sr 3:0:0:0: Attached scsi CD-ROM sr0
  530. sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
  531. sr 3:0:1:0: Attached scsi CD-ROM sr1
  532. gameport gameport0: EMU10K1 is pci0000:02:07.1/gameport0, io 0xcc00, speed 1204kHz
  533. EDAC amd64_edac: Ver: 3.3.0 Dec 22 2010
  534. Floppy drive(s): fd0 is 1.44M
  535. usb 3-3: new high speed USB device using ehci_hcd and address 2
  536. FDC 0 is a post-1991 82077
  537. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
  538. ohci1394 0000:02:07.2: PCI INT B -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
  539. ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[feaff000-feaff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
  540. forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:6b:88:6a
  541. forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
  542. i2c i2c-0: nForce2 SMBus adapter at 0x5000
  543. i2c i2c-1: nForce2 SMBus adapter at 0x5040
  544. EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
  545. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  546. Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  547. (Note that use of the override may cause unknown side effects.)
  548. amd64_edac: probe of 0000:00:18.2 failed with error -22
  549. usb 3-3: New USB device found, idVendor=0840, idProduct=00a1
  550. usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  551. usb 3-3: Product: USB 2.0 Mass Storage Device
  552. usb 3-3: Manufacturer: Generic
  553. usb 3-3: SerialNumber: 00A10000000025152
  554. parport_pc 00:06: reported by Plug and Play ACPI
  555. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
  556. ppdev: user-space parallel port driver
  557. Initializing USB Mass Storage driver...
  558. scsi6 : usb-storage 3-3:1.0
  559. usbcore: registered new interface driver usb-storage
  560. USB Mass Storage support registered.
  561. usb 2-2: new full speed USB device using ohci_hcd and address 2
  562. usb 2-2: New USB device found, idVendor=041e, idProduct=4053
  563. usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  564. ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0101060a53]
  565. scsi 6:0:0:0: Direct-Access WDC WD50 00AAVS-00ZTB0 01.0 PQ: 0 ANSI: 0
  566. sd 6:0:0:0: Attached scsi generic sg4 type 0
  567. sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  568. sd 6:0:0:0: [sdc] Write Protect is off
  569. sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
  570. sd 6:0:0:0: [sdc] Assuming drive cache: write through
  571. sd 6:0:0:0: [sdc] Assuming drive cache: write through
  572. sdc: sdc1
  573. sd 6:0:0:0: [sdc] Assuming drive cache: write through
  574. sd 6:0:0:0: [sdc] Attached SCSI disk
  575. Linux video capture interface: v2.00
  576. gspca: main v2.10.0 registered
  577. gspca: probing 041e:4053
  578. zc3xx: Sensor Tas5130 (VF0250)
  579. input: zc3xx as /devices/pci0000:00/0000:00:02.1/usb2/2-2/input/input4
  580. gspca: video0 created
  581. usbcore: registered new interface driver zc3xx
  582. zc3xx: registered
  583. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17
  584. EMU10K1_Audigy 0000:02:07.0: PCI INT A -> Link[LNKD] -> GSI 17 (level, low) -> IRQ 17
  585. Installing spdif_bug patch: SB Audigy 2 [SB0240]
  586. powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
  587. powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2
  588. powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
  589. powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
  590. powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
  591. device-mapper: uevent: version 1.0.3
  592. device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
  593. EXT4-fs (sda18): re-mounted. Opts: (null)
  594. EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  595. EXT4-fs (sda24): mounted filesystem with ordered data mode. Opts: (null)
  596. EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: (null)
  597. fuse init (API version 7.15)
  598. EXT3-fs: barriers not enabled
  599. kjournald starting. Commit interval 5 seconds
  600. EXT3-fs (sda9): using internal journal
  601. EXT3-fs (sda9): mounted filesystem with ordered data mode
  602. loop: module loaded
  603. Adding 4095468k swap on /dev/sda6. Priority:-1 extents:1 across:4095468k
  604. NET: Registered protocol family 10
  605. lo: Disabled Privacy Extensions
  606. NET: Registered protocol family 17
  607. [drm] Initialized drm 1.1.0 20060810
  608. nouveau 0000:01:00.0: PCI INT A -> Link[LNKD] -> GSI 17 (level, low) -> IRQ 17
  609. [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031100a1)
  610. [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
  611. [drm] nouveau 0000:01:00.0: ... appears to be valid
  612. [drm] nouveau 0000:01:00.0: BMP BIOS found
  613. [drm] nouveau 0000:01:00.0: BMP version 5.39
  614. [drm] nouveau 0000:01:00.0: Bios version 04.31.20.52
  615. [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
  616. [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
  617. [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
  618. [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000
  619. [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000003
  620. [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
  621. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEC78
  622. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEFD7
  623. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF13A
  624. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF2AA
  625. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF2C7
  626. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF2E4
  627. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF4C1
  628. [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
  629. [TTM] Zone kernel: Available graphics memory: 512016 kiB.
  630. [TTM] Initializing pool allocator.
  631. agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
  632. agpgart: work_for_cpu tried to set rate=x12. Setting to AGP3 x8 mode.
  633. agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
  634. nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
  635. [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
  636. [drm] nouveau 0000:01:00.0: Saving VGA fonts
  637. [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
  638. [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
  639. [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
  640. [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
  641. [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
  642. [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
  643. [drm] nouveau 0000:01:00.0: Load detected on output B
  644. [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x48000, bo ffff880036321800
  645. Console: switching to colour frame buffer device 90x36
  646. fb0: nouveaufb frame buffer device
  647. drm: registered panic notifier
  648. [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
  649. [drm] nouveau 0000:01:00.0: Load detected on output B
  650. [drm] nouveau 0000:01:00.0: Load detected on output B
  651. [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
  652. [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
  653. [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
  654. [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
  655. [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
  656. [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
  657. ip_tables: (C) 2000-2006 Netfilter Core Team
  658. Netfilter messages via NETLINK v0.30.
  659. nf_conntrack version 0.5.0 (8000 buckets, 32000 max)
  660. NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  661. NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  662. ip_set version 4 loaded
  663. ctnetlink v0.93: registering with nfnetlink.
  664. ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  665. xt_time: kernel timezone is -0000
  666. eth0: no IPv6 routers present
  667. u32 classifier
  668. Actions configured
  669. [drm] nouveau 0000:01:00.0: Load detected on output B
  670. yakuake invoked oom-killer: gfp_mask=0x201da, order=0, oom_adj=0, oom_score_adj=0
  671. yakuake cpuset=/ mems_allowed=0
  672. Pid: 5470, comm: yakuake Not tainted 2.6.36.2-desktop-2mnb #1
  673. Call Trace:
  674. [<ffffffff810ac4c1>] ? cpuset_print_task_mems_allowed+0x91/0xa0
  675. [<ffffffff810f1789>] dump_header+0x89/0x1a0
  676. [<ffffffff8120f8f0>] ? ___ratelimit+0xa0/0x110
  677. [<ffffffff810f1bdd>] oom_kill_process+0x8d/0x200
  678. [<ffffffff810f1f68>] out_of_memory+0x218/0x3b0
  679. [<ffffffff810f58fd>] __alloc_pages_nodemask+0x70d/0x720
  680. [<ffffffff8112802a>] alloc_pages_current+0x9a/0x100
  681. [<ffffffff810eebb7>] __page_cache_alloc+0x87/0x90
  682. [<ffffffff810f9019>] __do_page_cache_readahead+0xc9/0x210
  683. [<ffffffff810f9181>] ra_submit+0x21/0x30
  684. [<ffffffff810f077b>] filemap_fault+0x38b/0x450
  685. [<ffffffff8132630e>] ? sock_aio_read+0x17e/0x190
  686. [<ffffffff8110c164>] __do_fault+0x54/0x560
  687. [<ffffffff8110fd65>] handle_mm_fault+0x1c5/0xdb0
  688. [<ffffffff813efd39>] do_page_fault+0x179/0x340
  689. [<ffffffff813ec855>] page_fault+0x25/0x30
  690. Mem-Info:
  691. Node 0 DMA per-cpu:
  692. CPU 0: hi: 0, btch: 1 usd: 0
  693. Node 0 DMA32 per-cpu:
  694. CPU 0: hi: 186, btch: 31 usd: 113
  695. active_anon:107794 inactive_anon:107878 isolated_anon:32
  696. active_file:186 inactive_file:236 isolated_file:0
  697. unevictable:0 dirty:0 writeback:334 unstable:0
  698. free:2012 slab_reclaimable:3791 slab_unreclaimable:6786
  699. mapped:465 shmem:339 pagetables:10971 bounce:0
  700. Node 0 DMA free:4024kB min:60kB low:72kB high:88kB active_anon:5480kB inactive_anon:5668kB active_file:12kB inactive_file:116kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15708kB mlocked:0kB dirty:0kB writeback:0kB mapped:28kB shmem:0kB slab_reclaimable:152kB slab_unreclaimable:132kB kernel_stack:0kB pagetables:256kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:228 all_unreclaimable? yes
  701. lowmem_reserve[]: 0 993 993 993
  702. Node 0 DMA32 free:4024kB min:4000kB low:5000kB high:6000kB active_anon:425696kB inactive_anon:425844kB active_file:732kB inactive_file:828kB unevictable:0kB isolated(anon):128kB isolated(file):0kB present:1017764kB mlocked:0kB dirty:0kB writeback:1336kB mapped:1832kB shmem:1356kB slab_reclaimable:15012kB slab_unreclaimable:27012kB kernel_stack:2696kB pagetables:43628kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:2342 all_unreclaimable? yes
  703. lowmem_reserve[]: 0 0 0 0
  704. Node 0 DMA: 2*4kB 8*8kB 5*16kB 3*32kB 3*64kB 2*128kB 3*256kB 1*512kB 0*1024kB 1*2048kB 0*4096kB = 4024kB
  705. Node 0 DMA32: 152*4kB 25*8kB 23*16kB 11*32kB 3*64kB 2*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 4024kB
  706. 4138 total pagecache pages
  707. 3360 pages in swap cache
  708. Swap cache stats: add 1093744, delete 1090384, find 13699/21349
  709. Free swap = 0kB
  710. Total swap = 4095468kB
  711. 262048 pages RAM
  712. 6072 pages reserved
  713. 4061 pages shared
  714. 252388 pages non-shared
  715. [ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name
  716. [ 171] 0 171 1658 12 0 -17 -1000 udevd
  717. [ 656] 0 656 4240 0 0 0 0 mount.ntfs-3g
  718. [ 680] 0 680 1671 12 0 -17 -1000 udevd
  719. [ 681] 0 681 1671 9 0 -17 -1000 udevd
  720. [ 3358] 0 3358 994 12 0 0 0 acpid
  721. [ 3369] 0 3369 60107 17 0 0 0 rsyslogd
  722. [ 3387] 0 3387 1083 7 0 0 0 mdadm
  723. [ 3413] 0 3413 3089 0 0 0 0 atd
  724. [ 3429] 0 3429 2034 2 0 0 0 bootlogd
  725. [ 3466] 499 3466 3377 14 0 0 0 dbus-daemon
  726. [ 3469] 0 3469 3686 33 0 0 0 crond
  727. [ 3517] 494 3517 10800 190 0 0 0 hald
  728. [ 3521] 0 3521 144253 22 0 0 0 console-kit-dae
  729. [ 3635] 0 3635 5597 20 0 0 0 hald-runner
  730. [ 3797] 0 3797 6094 13 0 0 0 hald-addon-stor
  731. [ 3806] 0 3806 6096 0 0 0 0 hald-addon-cpuf
  732. [ 3808] 494 3808 4972 19 0 0 0 hald-addon-acpi
  733. [ 3810] 0 3810 6094 11 0 0 0 hald-addon-stor
  734. [ 3811] 0 3811 6094 13 0 0 0 hald-addon-stor
  735. [ 3833] 0 3833 1509 2 0 0 0 ifplugd
  736. [ 3933] 0 3933 6094 0 0 0 0 hald-addon-inpu
  737. [ 3961] 0 3961 7160 16 0 0 0 kdm
  738. [ 3963] 0 3963 41195 1326 0 0 0 X
  739. [ 3998] 0 3998 17133 18 0 0 0 kdm
  740. [ 4261] 0 4261 1355 2 0 0 0 hddtemp
  741. [ 4278] 484 4278 5481 34 0 0 0 ntpd
  742. [ 4297] 498 4297 6402 2 0 0 0 avahi-daemon
  743. [ 4298] 498 4298 6369 0 0 0 0 avahi-daemon
  744. [ 4336] 0 4336 17444 41 0 0 0 cupsd
  745. [ 4355] 0 4355 1638 28 0 0 0 vnstatd
  746. [ 4425] 0 4425 6423 0 0 0 0 preload
  747. [ 4550] 0 4550 5657 15 0 0 0 master
  748. [ 4555] 485 4555 6173 0 0 0 0 pickup
  749. [ 4556] 485 4556 6185 17 0 0 0 qmgr
  750. [ 4921] 0 4921 2630 0 0 0 0 mandi
  751. [ 4930] 0 4930 986 11 0 0 0 mingetty
  752. [ 4931] 0 4931 986 11 0 0 0 mingetty
  753. [ 4932] 0 4932 986 11 0 0 0 mingetty
  754. [ 4933] 0 4933 986 11 0 0 0 mingetty
  755. [ 4934] 0 4934 986 11 0 0 0 mingetty
  756. [ 4935] 0 4935 986 11 0 0 0 mingetty
  757. [ 5029] 500 5029 3012 10 0 0 0 startkde
  758. [ 5056] 500 5056 4035 24 0 0 0 gpg-agent
  759. [ 5102] 500 5102 4970 0 0 0 0 dbus-launch
  760. [ 5103] 500 5103 3795 317 0 0 0 dbus-daemon
  761. [ 5147] 500 5147 25562 0 0 0 0 s2u
  762. [ 5219] 500 5219 951 0 0 0 0 start_kdeinit
  763. [ 5220] 500 5220 63624 89 0 0 0 kdeinit4
  764. [ 5221] 500 5221 64730 135 0 0 0 klauncher
  765. [ 5223] 500 5223 110047 198 0 0 0 kded4
  766. [ 5225] 500 5225 2858 16 0 0 0 gam_server
  767. [ 5231] 500 5231 90564 124 0 0 0 kglobalaccel
  768. [ 5239] 500 5239 985 0 0 0 0 kwrapper4
  769. [ 5242] 500 5242 111421 136 0 0 0 ksmserver
  770. [ 5263] 500 5263 115762 192 0 0 0 kwin
  771. [ 5265] 500 5265 266536 26 0 0 0 knotify4
  772. [ 5267] 500 5267 212771 1148 0 0 0 plasma-desktop
  773. [ 5269] 500 5269 2284 5 0 0 0 ksysguardd
  774. [ 5273] 500 5273 57923 65 0 0 0 kuiserver
  775. [ 5275] 500 5275 86332 189 0 0 0 akonadi_control
  776. [ 5277] 500 5277 215684 0 0 0 0 akonadiserver
  777. [ 5279] 500 5279 188661 70 0 0 0 mysqld
  778. [ 5340] 500 5340 67953 44 0 0 0 akonadi_contact
  779. [ 5359] 500 5359 67936 38 0 0 0 akonadi_contact
  780. [ 5360] 500 5360 72150 46 0 0 0 akonadi_ical_re
  781. [ 5362] 500 5362 72148 38 0 0 0 akonadi_ical_re
  782. [ 5363] 500 5363 72148 35 0 0 0 akonadi_ical_re
  783. [ 5364] 500 5364 72141 32 0 0 0 akonadi_ical_re
  784. [ 5365] 500 5365 72010 37 0 0 0 akonadi_ical_re
  785. [ 5366] 500 5366 72010 41 0 0 0 akonadi_ical_re
  786. [ 5367] 500 5367 72010 88 0 0 0 akonadi_ical_re
  787. [ 5368] 500 5368 72010 34 0 0 0 akonadi_ical_re
  788. [ 5369] 500 5369 72142 42 0 0 0 akonadi_ical_re
  789. [ 5370] 500 5370 72010 44 0 0 0 akonadi_ical_re
  790. [ 5371] 500 5371 72176 42 0 0 0 akonadi_ical_re
  791. [ 5372] 500 5372 72150 39 0 0 0 akonadi_ical_re
  792. [ 5373] 500 5373 69367 46 0 0 0 akonadi_maildir
  793. [ 5374] 500 5374 68570 69 0 0 0 akonadi_maildis
  794. [ 5375] 500 5375 86156 125 0 0 0 akonadi_nepomuk
  795. [ 5376] 500 5376 67817 42 0 0 0 akonadi_vcard_r
  796. [ 5377] 500 5377 67953 45 0 0 0 akonadi_vcard_r
  797. [ 5378] 500 5378 67817 81 0 0 0 akonadi_vcard_r
  798. [ 5379] 500 5379 67953 86 0 0 0 akonadi_vcard_r
  799. [ 5380] 500 5380 67817 40 0 0 0 akonadi_vcard_r
  800. [ 5381] 500 5381 67949 74 0 0 0 akonadi_vcard_r
  801. [ 5382] 500 5382 67957 87 0 0 0 akonadi_vcard_r
  802. [ 5383] 500 5383 67948 74 0 0 0 akonadi_vcard_r
  803. [ 5384] 500 5384 67953 35 0 0 0 akonadi_vcard_r
  804. [ 5395] 500 5395 90808 143 0 0 0 kaccess
  805. [ 5408] 500 5408 32753 10 0 0 0 nepomukserver
  806. [ 5427] 500 5427 152963 160 0 0 0 krunner
  807. [ 5461] 500 5461 69624 83 0 0 0 polkit-kde-auth
  808. [ 5463] 500 5463 113490 666 0 0 0 kmix
  809. [ 5465] 0 5465 12491 23 0 0 0 polkitd
  810. [ 5467] 500 5467 112072 1176 0 0 0 konversation
  811. [ 5470] 500 5470 87784 299 0 0 0 yakuake
  812. [ 5474] 500 5474 117299 64 0 0 0 gnote
  813. [ 5479] 500 5479 33208 28 0 0 0 pam-panel-icon
  814. [ 5486] 500 5486 58796 189 0 0 0 python
  815. [ 5487] 500 5487 28583 11 0 0 0 xsettings-kde
  816. [ 5492] 500 5492 104212 110 0 0 0 pulseaudio
  817. [ 5494] 496 5494 40541 10 0 0 0 rtkit-daemon
  818. [ 5499] 500 5499 58843 390 0 0 0 net_applet
  819. [ 5500] 500 5500 3087 20 0 0 0 pam_timestamp_c
  820. [ 5508] 500 5508 90901 146 0 0 0 klipper
  821. [ 5512] 500 5512 10546 52 0 0 0 gconfd-2
  822. [ 5517] 500 5517 95830 118 0 0 0 korgac
  823. [ 5518] 500 5518 25418 2 0 0 0 gconf-helper
  824. [ 5521] 500 5521 4262 0 0 0 0 bash
  825. [ 5545] 500 5545 10226 16 0 0 0 gvfsd
  826. [ 5554] 500 5554 67015 0 0 0 0 gvfs-fuse-daemo
  827. [ 6154] 500 6154 136018 720 0 0 0 dolphin
  828. [ 6821] 500 6821 1521656 201843 0 0 0 vlc
  829. [ 6862] 500 6862 3032 3 0 0 0 xdg-screensaver
  830. [ 6866] 500 6866 4904 0 0 0 0 xprop
  831. [ 7026] 500 7026 58843 371 0 0 0 net_applet
  832. Out of memory: Kill process 6821 (vlc) score 881 or sacrifice child
  833. Killed process 6821 (vlc) total-vm:6086624kB, anon-rss:807372kB, file-rss:0kB
  834. SysRq : Keyboard mode set to system default
  835. SysRq : Emergency Sync
  836. SysRq : Terminate All Tasks
  837. Emergency Sync complete
  838. [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
  839. [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
  840. [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
  841. [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
  842. [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
  843. [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
  844. [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!