Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELLO! BOOT0 is starting!
- boot0 version : 4.0.0
- rtc[1] value = 0x00010000
- rtc[2] value = 0x00020000
- rtc[3] value = 0x00030000
- DRAM DRIVE INFO: V1.0
- DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM normal_mode value: 00000001
- DRAM CLK =672 MHZ
- PMU: AXP81X
- ddr voltage = 1200 mv
- using ic A83T
- using axp AXP813
- DRAM zq value: 00003bfb
- dram size =2048
- card boot number = 0
- card no is 0
- sdcard 0 line count 0
- [mmc]: mmc driver ver 2014-8-11 15:06:39
- [mmc]: ***Try SD card 0***
- [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
- [mmc]: vendor: Man 00035344 Snr 83562d79
- [mmc]: product: SL16G
- [mmc]: revision: 8.0
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- ERROR! NOT find the head of uboot.
- The size of uboot is 000d8000.
- sum=ce3ec68c
- src_sum=ce3ec68c
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- normal mode
- [ 0.314]
- U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
- [ 0.322]version: 2.1.0
- normal mode
- [ 0.402]pmbus: normal or secure os
- ready
- [ 0.407]PMU: AXP81X
- [ 0.409]PMU: AXP81X found
- bat_vol=0, ratio=100
- [ 0.414]PMU: dcdc2 900
- [ 0.417]PMU: pll1 1008 Mhz
- AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
- set power on vol to default
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 900, onoff=1
- dcdc3_vol = 900, onoff=1
- dcdc4_vol = 900, onoff=1
- dcdc6_vol = 900, onoff=1
- aldo1_vol = 1800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- eldo2_vol = 1800, onoff=0
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 3300, onoff=0
- dldo3_vol = 2500, onoff=1
- dldo4_vol = 2800, onoff=0
- fldo2_vol = 900, onoff=1
- gpio0_vol = 3300, onoff=1
- gpio1_vol = 3300, onoff=1
- find power_sply to end
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b04, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b08, value=0xd, pmu_vol=3300
- supply=dldo3
- axp=axp81x, supply=dldo3, vol=1800
- reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b10, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b14, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b18, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
- supply=aldo3
- axp=axp81x, supply=aldo3, vol=3000
- reg addr=0x1f02f00, value=0xa, pmu_vol=3000
- config gpio bias voltage finish
- vbus exist
- no battery, limit to dc
- ac100 reg 0x00 = 0x101
- ac100 reg 0xd0 = 0x0
- ac100 reg 0xd1 = 0x0
- __446__:(board.c:power_source_init)
- [AXP81X]:[00]=[C5]
- [AXP81X]:[01]=[10]
- [AXP81X]:[02]=[02]
- [AXP81X]:[03]=[51]
- [AXP81X]:[04]=[00]
- [AXP81X]:[05]=[00]
- [AXP81X]:[06]=[00]
- [AXP81X]:[07]=[00]
- [AXP81X]:[08]=[00]
- [AXP81X]:[09]=[00]
- [AXP81X]:[0A]=[00]
- [AXP81X]:[0B]=[00]
- [AXP81X]:[0C]=[00]
- [AXP81X]:[0D]=[00]
- [AXP81X]:[0E]=[00]
- [AXP81X]:[0F]=[0E]
- [AXP81X]:[10]=[3F]
- [AXP81X]:[11]=[00]
- [AXP81X]:[12]=[20]
- [AXP81X]:[13]=[C8]
- [AXP81X]:[14]=[08]
- [AXP81X]:[15]=[1A]
- [AXP81X]:[16]=[1A]
- [AXP81X]:[17]=[0B]
- [AXP81X]:[18]=[15]
- [AXP81X]:[19]=[00]
- [AXP81X]:[1A]=[16]
- [AXP81X]:[1B]=[00]
- [AXP81X]:[1C]=[0B]
- [AXP81X]:[1D]=[04]
- [AXP81X]:[1E]=[00]
- [AXP81X]:[1F]=[00]
- [AXP81X]:[20]=[11]
- [AXP81X]:[21]=[A8]
- [AXP81X]:[22]=[A8]
- [AXP81X]:[23]=[A8]
- [AXP81X]:[24]=[A4]
- [AXP81X]:[25]=[9E]
- [AXP81X]:[26]=[A8]
- [AXP81X]:[27]=[FC]
- [AXP81X]:[28]=[0B]
- [AXP81X]:[29]=[0B]
- [AXP81X]:[2A]=[17]
- [AXP81X]:[2B]=[00]
- [AXP81X]:[2C]=[00]
- [AXP81X]:[2D]=[30]
- [AXP81X]:[2E]=[40]
- [AXP81X]:[2F]=[00]
- [AXP81X]:[30]=[03]
- [AXP81X]:[31]=[03]
- [AXP81X]:[32]=[43]
- [AXP81X]:[33]=[C8]
- [AXP81X]:[34]=[45]
- [AXP81X]:[35]=[83]
- [AXP81X]:[36]=[59]
- [AXP81X]:[37]=[00]
- [AXP81X]:[38]=[A5]
- [AXP81X]:[39]=[1F]
- [AXP81X]:[3A]=[85]
- [AXP81X]:[3B]=[08]
- [AXP81X]:[3C]=[FC]
- [AXP81X]:[3D]=[16]
- [AXP81X]:[3E]=[7C]
- BPI-M3:[AXP81X]:[3A]=[85]
- limit to 2500mA
- fel key old mode
- run key detect
- no key found
- no key input
- dram_para_set start
- dram_para_set end
- [ 0.760]DRAM: 2 GiB
- relocation Offset is: 75af7000
- user_gpio config
- user_gpio ok
- gic: normal or no secure os mode
- script config pll_de to 504 Mhz
- script config pll_video1 to 297 Mhz
- Not Found clk pll_video in script
- enable power vcc-hdmi-18, ret=0
- DRV_DISP_Init end
- [ 0.998]boot_disp.output_disp=1
- [ 1.002]boot_disp.output_type=3
- [ 1.005]boot_disp.output_mode=5
- [ 1.008]fetch script data boot_disp.auto_hpd fail
- disp1 device type(4) enable
- attched ok, mgr1<-->device1, type=4, mode=5----
- ready to set mode
- workmode = 0
- MMC: 0
- [ 1.043][mmc]: mmc driver ver 2015-04-13 14:50:00
- [ 1.048][mmc]: get sdc_phy_wipe fail.
- [ 1.052][mmc]: get sdc0 sdc_erase fail.
- [ 1.056][mmc]: get sdc_f_max fail,use default 50000000Hz
- [ 1.061][mmc]: get sdc_ex_dly_used fail,use default dly
- [ 1.067][mmc]: SUNXI SD/MMC: 0
- [ 1.080][mmc]: *Try SD card 0*
- [ 1.124][mmc]: CID 0x3534453 0x4c313647 0x8083562d 0x790103f3
- [ 1.129][mmc]: mmc clk 50000000
- [ 1.133][mmc]: SD/MMC Card: 4bit, capacity: 15193MB
- [ 1.138][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
- [ 1.143][mmc]: ***SD/MMC 0 init OK!!!***
- [ 1.151][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
- [ 1.157][mmc]: secure_feature 0x0
- [ 1.160][mmc]: secure_removal_type 0x0
- [ 1.164]sunxi flash init ok
- [ 1.172][mmc]: MMC Device 2 not found
- [ 1.176][mmc]: Can not find mmc dev
- [ 1.179][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
- sunxi_secstorage_read fail
- get secure storage map err
- sunxi secure storage is not supported
- private partition is not exist
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:6-
- -name- -start- -size-
- boot-res : 1000000 2000000
- env : 3000000 1000000
- boot : 4000000 1000000
- rootfs : 5000000 20000000
- klog : 25000000 1000000
- UDISK : 26000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- key 0
- recovery key high 10, low 8
- cant find fstbt value
- no misc partition is found
- to be run cmd=run setargs_mmc boot_normal
- serial is: 00000000000000000000
- mount part name boot-res
- cant open script.bin, maybe it is not exist
- WORK_MODE_BOOT
- board_status_probe
- [ 1.285]pre sys mode
- sunxi_bmp_logo_display
- [ 1.410][mmc]: blkcnt should not be 0
- [ 1.428]fetch script data boot_disp.output_disp fail
- [ 1.433]screen_id =1, screen_width =1280, screen_height =720
- [ 1.439]frame buffer address 46400000
- [ 1.443]Hit any key to stop autoboot: 3 2 1 0
- [ 4.699][mmc]: MMC Device 2 not found
- ** Invalid boot device **
- [ 4.712][mmc]: blkcnt should not be 0
- Loaded environment from uEnv.txt
- Running uenvcmd ...
- Banaan Pi bpi-m3 chip: a83t Service: linux
- ** Unable to read "bananapi/berryboot.img" from mmc 0:1 **
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.4.39-BPI-M3-Kernel
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 5717288 Bytes = 5.5 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- [ 5.093][mmc]: MMC Device 2 not found
- [ 5.097][mmc]: mmc not find,so not exit
- [ 5.101]
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 2048MB
- ion_carveout reserve: 96m 128m
- ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
- ion_cma reserve: 120m 176m 512m
- ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
- ------sun8i_smp_init_ops----37-----
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 524288
- [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
- [ 0.000000] Normal zone: 1404 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3204 pages used for memmap
- [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] [mcpm_smp_init_cpus] ncores=8
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
- [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
- [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 board=bpi-m3 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 2048MB = 2048MB total
- [ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
- [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
- [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
- [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001424] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.001497] pid_max: default: 32768 minimum: 301
- [ 0.001835] Mount-cache hash table entries: 512
- [ 0.003183] Initializing cgroup subsys cpuacct
- [ 0.003228] Initializing cgroup subsys memory
- [ 0.003301] Initializing cgroup subsys devices
- [ 0.003335] Initializing cgroup subsys freezer
- [ 0.003367] Initializing cgroup subsys blkio
- [ 0.003421] Initializing cgroup subsys perf_event
- [ 0.003520] CPU: Testing write buffer coherency: ok
- [ 0.003610] ftrace: allocating 27619 entries in 81 pages
- [ 0.040301] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.040386] Setting up static identity map for 0x4076b5a8 - 0x4076b600
- [ 0.010000] CPU1: Booted secondary processor
- [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.010000] CPU2: Booted secondary processor
- [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.010000] CPU3: Booted secondary processor
- [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.260088] CPU4: failed to boot: -22
- [ 0.300067] CPU5: failed to boot: -22
- [ 0.340070] CPU6: failed to boot: -22
- [ 0.380093] CPU7: failed to boot: -22
- [ 0.380309] Brought up 4 CPUs
- [ 0.380335] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.380910] devtmpfs: initialized
- [ 0.390044] pinctrl core: initialized pinctrl subsystem
- [ 0.411117] NET: Registered protocol family 16
- [ 0.433812] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.433926] script_sysfs_init success
- [ 0.433978] sunxi_dump_init success
- [ 0.435115] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.436940] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.437401] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
- [ 0.438643] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.438688] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.439545] [sunxi-module]: [sunxi-module.0] probe success
- [ 0.440282] script config pll_video1 to 297 Mhz
- [ 0.440318] script config pll_ve to 432 Mhz
- [ 0.440342] Not Found clk pll_periph in script
- [ 0.440370] script config pll_gpu to 432 Mhz
- [ 0.440399] script config pll_hsic to 480 Mhz
- [ 0.440428] script config pll_de to 504 Mhz
- [ 0.440449] sunxi_default_clk_init
- [ 0.440469] try to set pll6ahb1 to 200000000
- [ 0.440531] try to set ahb clk source to pll6ahb1
- [ 0.440556] set ahb clk source to pll6ahb1
- [ 0.440580] try to set ahb1 to 200000000
- [ 0.440606] try to set apb1 to 100000000
- [ 0.441560] ===fe3o4==== sunxi_root_procfs_attach ret:0
- [ 0.451216] bio: create slab <bio-0> at 0
- [ 0.451216] [ARISC] :sunxi-arisc driver v1.70
- [ 0.463316] [ARISC] :arisc version: [v0.1.25.3]
- [ 0.463372] [sunxi-module]: arisc register success
- [ 0.463805] sunxi_get_soc_bin: slow chip
- [ 0.464251] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
- [ 0.010000] CPU4: Booted secondary processor
- [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
- [ 0.010000] CPU5: Booted secondary processor
- [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
- [ 0.010000] CPU6: Booted secondary processor
- [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
- [ 0.010000] CPU7: Booted secondary processor
- [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
- [ 0.491436] SCSI subsystem initialized
- [ 0.491436] libata version 3.00 loaded.
- [ 0.491436] usbcore: registered new interface driver usbfs
- [ 0.491436] usbcore: registered new interface driver hub
- [ 0.491436] usbcore: registered new device driver usb
- [ 0.491436] twi_chan_cfg()335 - [twi0] has no twi_regulator.
- [ 0.491436] twi_chan_cfg()335 - [twi1] has no twi_regulator.
- [ 0.491436] twi_chan_cfg()335 - [twi2] has no twi_regulator.
- [ 0.491693] Linux video capture interface: v2.00
- [ 0.500388] BPI-M3: tmp [00]
- [ 0.500388] BPI-M3: set PMIC AC 4000mA
- [ 0.500388] BPI-M3: set PMIC AC 4000mA
- [ 0.510398] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.511059] Bluetooth: Core ver 2.16
- [ 0.511125] NET: Registered protocol family 31
- [ 0.511151] Bluetooth: HCI device and connection manager initialized
- [ 0.511183] Bluetooth: HCI socket layer initialized
- [ 0.511209] Bluetooth: L2CAP socket layer initialized
- [ 0.511256] Bluetooth: SCO socket layer initialized
- [ 0.511544] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.511634] Switching to clocksource arch_sys_counter
- [ 0.537861] FS-Cache: Loaded
- [ 0.538208] CacheFiles: Loaded
- [ 0.549945] axp81x_dcdc1: Failed to create debugfs directory
- [ 0.551180] NET: Registered protocol family 2
- [ 0.551576] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.552350] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.554840] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.556417] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.556449] TCP: reno registered
- [ 0.556477] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.556548] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.557009] NET: Registered protocol family 1
- [ 0.557469] RPC: Registered named UNIX socket transport module.
- [ 0.557504] RPC: Registered udp transport module.
- [ 0.557528] RPC: Registered tcp transport module.
- [ 0.557552] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.558292] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 0.558477] [pm]aw_pm_init!
- [ 0.558503] standby_mode = 1.
- [ 0.558524] wakeup src cnt is : 2.
- [ 0.558550] pmu name: pmu1_para .
- [ 0.558576] pmu1_enable = 0x1.
- [ 0.558597] pmux_id = 0x7.
- [ 0.558619] pmu name: pmu2_para .
- [ 0.558640] config_pmux_para: script_parser_fetch err.
- [ 0.558665] pmu2_enable = 0x0.
- [ 0.559084] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.559268] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.559308] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.559400] after inited: sys_mask config = 0xebd5.
- [ 0.559429] dynamic_standby enalbe = 0x0.
- [ 0.559484] sunxi_reg_init enter
- [ 0.559812] lock super standby for a83!
- [ 0.559846] lookup_scene_lock_name: new scene lock super_standby
- [ 0.559874] scene_lock_init name=super_standby
- [ 0.559901] scene_lock: super_standby, type 5, count 1
- [ 0.561913] highmem bounce pool size: 64 pages
- [ 0.569809] VFS: Disk quotas dquot_6.5.2
- [ 0.570249] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.572424] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.572992] NFS: Registering the id_resolver key type
- [ 0.573760] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.575039] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.575476] fuse init (API version 7.18)
- [ 0.576617] ceph: loaded (mds proto 32)
- [ 0.576663] msgmni has been set to 1175
- [ 0.584967] alg: No test for stdrng (krng)
- [ 0.668300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.668358] io scheduler noop registered
- [ 0.668381] io scheduler deadline registered
- [ 0.668588] io scheduler cfq registered (default)
- [ 0.669119] pwm module init!
- [ 0.669727] [DISP]disp_module_init
- [ 0.705190] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
- [ 0.720502] Console: switching to colour frame buffer device 160x45
- [ 0.736621] [DISP]disp_module_init finish
- [ 0.812050] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.812262] sw_uart_pm()890 - uart0 clk is already enable
- [ 0.812429] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 1.005041] console [ttyS0] enabled
- [ 1.146997] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.311212] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 1.627282] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.945913] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
- [ 2.261495] [drm] Initialized drm 1.1.0 20060810
- [ 2.432540] brd: module loaded
- [ 2.601783] loop: module loaded
- [ 2.609561] [rf_pm]: select module num is 10
- [ 2.618483] [rf_pm]: module power1 name vcc-wifi-io
- [ 2.628043] [rf_pm]: failed to fetch module_power1_vol
- [ 2.637895] [rf_pm]: module power2 name
- [ 2.646374] [rf_pm]: failed to fetch module_power2_vol
- [ 2.656250] [rf_pm]: module power3 name
- [ 2.664714] [rf_pm]: failed to fetch module_power3_vol
- [ 2.674528] [rf_pm]: mod has no power_switch gpio
- [ 2.683855] [rf_pm]: mod has no chip_en gpio
- [ 2.692644] [rf_pm]: lpo_use_apclk: ac10032k2
- [ 2.701623] [rf_pm]: get power regulator failed.
- [ 2.710840] [rf_pm]: enable vcc-wifi-io.
- [ 2.719692] [rf_pm]: mod info power switch -1
- [ 2.728504] [rf_pm]: set ac10032k2 32k out
- [ 2.736987] scene_lock_init name=rf_pm
- [ 2.745235] [wifi_pm]: wifi gpio init is OK !!
- [ 2.754033] [rfkill]: mod has no ls_int gpio
- [ 2.762557] [rfkill]: mod has no pcm_ch gpio
- [ 2.771353] [rfkill]: rfkill set power 0
- [ 2.790093] Loading iSCSI transport class v2.0-870.
- [ 2.799638] iscsi: registered transport (tcp)
- [ 2.808604] [spi]: Found 1 spi devices in config files
- [ 2.818037] boards_num modalias max_spd_hz bus_num cs mode
- [ 2.830182] 0 spidev 33000000 0 0 3
- [ 2.842774] axp81x_dcdc1: Failed to create debugfs directory
- [ 2.853218] spi spi0: master is unqueued, this is deprecated
- [ 2.863680] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
- [ 2.875801] [spi-0]: driver probe succeed, base f1c68000, irq 97!
- [ 2.887970] usbcore: registered new interface driver qf9700
- [ 2.898133] usbcore: registered new interface driver smsc95xx
- [ 2.908367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.939525] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.952281] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 2.965455] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 2.990056] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 3.000360] ehci_irq: highspeed device connect
- [ 3.009089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.020393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.032186] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.044392] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
- [ 3.055630] usb usb1: SerialNumber: sunxi-ehci
- [ 3.065082] hub 1-0:1.0: USB hub found
- [ 3.073130] hub 1-0:1.0: 1 port detected
- [ 3.081756] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.112646] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.125206] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
- [ 3.137701] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 3.204131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.215822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.228036] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.240201] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
- [ 3.251828] usb usb2: SerialNumber: sunxi-ohci
- [ 3.261599] hub 2-0:1.0: USB hub found
- [ 3.270059] hub 2-0:1.0: 1 port detected
- [ 3.279046] Initializing USB Mass Storage driver...
- [ 3.288938] usbcore: registered new interface driver usb-storage
- [ 3.299968] USB Mass Storage support registered.
- [ 3.309552] usbcore: registered new interface driver ums-alauda
- [ 3.320673] usbcore: registered new interface driver ums-cypress
- [ 3.331826] usbcore: registered new interface driver ums-datafab
- [ 3.342916] usbcore: registered new interface driver ums_eneub6250
- [ 3.354150] usbcore: registered new interface driver ums-freecom
- [ 3.365088] usbcore: registered new interface driver ums-isd200
- [ 3.375910] usbcore: registered new interface driver ums-jumpshot
- [ 3.386785] usbcore: registered new interface driver ums-karma
- [ 3.397288] usbcore: registered new interface driver ums-onetouch
- [ 3.400172] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
- [ 3.419301] usbcore: registered new interface driver ums-realtek
- [ 3.429877] usbcore: registered new interface driver ums-sddr09
- [ 3.440367] usbcore: registered new interface driver ums-sddr55
- [ 3.450728] usbcore: registered new interface driver ums-usbat
- [ 3.460951] usbcore: registered new interface driver usbserial
- [ 3.471007] usbcore: registered new interface driver usbserial_generic
- [ 3.481764] USB Serial support registered for generic
- [ 3.560752] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
- [ 3.571757] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.583211] usb 1-1: Product: USB 2.0 Hub
- [ 3.591769] hub 1-1:1.0: USB hub found
- [ 3.599500] hub 1-1:1.0: 4 ports detected
- [ 3.608432] usbserial: USB Serial Driver core
- [ 3.616936] file system registered
- [ 3.625967] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 3.637087] android_usb gadget: Number of LUNs=3
- [ 3.645594] lun0: LUN: removable file: (no medium)
- [ 3.654330] lun1: LUN: removable file: (no medium)
- [ 3.662981] lun2: LUN: removable file: (no medium)
- [ 3.671946] android_usb gadget: android_usb ready
- [ 3.680818] axp81x_dcdc1: Failed to create debugfs directory
- [ 3.690395] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
- [ 3.700473] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
- [ 3.713051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.723887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.737475] usb usb3: Product: sunxi_hcd host driver
- [ 3.748514] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
- [ 3.762037] usb usb3: SerialNumber: sunxi_hcd_host0
- [ 3.774009] hub 3-0:1.0: USB hub found
- [ 3.783689] hub 3-0:1.0: 1 port detected
- [ 3.794806] mousedev: PS/2 mouse device common for all mice
- [ 3.804737] sunxikbd_script_init: key para not found, used default para.
- [ 3.816561] sunxi_rtc_init(796): sunxi rtc device register!
- [ 3.816673] keyname:ctp_para subname:ctp_power_io ,get error!
- [ 3.836882] get sysconfig para erro!
- [ 3.837170] rtc_gettime(333): rå
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement