Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.12.10 00:59:20 =~=~=~=~=~=~=~=~=~=~=~=
- ?hello world!
- 5280 wai5t280 waiA[HDMI]: Set I2C Speed = 100 kHz
- [HDMI]: Chk_HotPlug() TV is not connected.
- [HDMI]: Read_EDID abort, HDMI cable plug off.
- [HDMI]: TV is not connected.
- PAL logo
- REALTEK ROM Monitor, Revision 0000.0201.0021.
- Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.
- For a list of available commands, type 'help'.
- Compilation time /version= Jun 21 2010 16:07:01 /0000.0201.0021
- MAC address = 00.11.22.33.44.55
- Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
- Processor ID/revision = 0x93 / 0x78
- Endianness = Little
- Flash memory size = 256 MByte
- SDRAM size = 256 MByte
- First free SDRAM address = 0x800fad00
- Press 'ESC' to Monitor mode
- Linux Kernel:
- FW Image from 0xa2020000, to 0x80100000, size=0x405086
- Audio FW:
- FW Image from 0xa2440000, to 0x81b00000, size=0x1b6368
- Video FW:
- FW Image from 0xa2600000, to 0x81d80000, size=0x22c1d8
- 5280Go 5280Go Bgooar d0xB80o1n0000d0ing mtdpa r0txs=0r0t0k_nan0d8:116332880k,
- 2
- 4192k(/),61440k(/usr/local/etc),13184k rootfstype=squashfs root=31:01
- Reset Ethernet Mac.
- Address = 0x80100000
- Realtek LINUX (DC ALIAS) started...
- Venus setting:
- ROSs have 2621440 bytes RAM.
- System CPU has 2 UARTs.
- System CPU uses external timer interrupt.
- Bootloader version: 0000.0201.0021. This version string is of new format.
- [0m[31;5mError! Unknown SB2_CHIP_INFO. Linux is too old?[0m
- Ethernet Mac address: 00.11.22.33.44.55
- Model Config length=0
- Config serial console: console=ttyS0,115200n8r
- prom_flashsize = 0x10000000
- Linux version 2.6.12.6-VENUS (root@138_korsen) (gcc version 3.4.4 mipssde-6.03.01-20051114) #1 Tue Feb 23 11:52:01 CST 2010
- audio addr: 1b00000
- CPU revision is: 00019378
- Determined physical RAM map:
- memory: 00100000 @ 00000000 (usable)
- memory: 00423000 @ 00100000 (reserved)
- memory: 015dd000 @ 00523000 (usable)
- memory: 00500000 @ 01b00000 (reserved)
- memory: 0e000000 @ 02000000 (usable)
- show info: max_low_pfn:65536
- show info: min_low_pfn:1315
- ZONE: DMA, PFN: 0
- ZONE: Normal, PFN: 32768
- ZONE: DVR, PFN: 4096
- Built 1 zonelists
- Kernel command line: mtdparts=rtk_nand:163328k,24192k(/),61440k(/usr/local/etc),13184k rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
- Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
- Primary data cache 32kB, 4-way, linesize 32 bytes.
- Synthesized TLB refill handler (20 instructions).
- Synthesized TLB load handler fastpath (32 instructions).
- Synthesized TLB store handler fastpath (32 instructions).
- Synthesized TLB modify handler fastpath (31 instructions).
- Cache parity protection disabled
- PID hash table entries: 1024 (order: 10, 16384 bytes)
- Estimate value: CPU frequency 405.02 MHz
- Using 27.000 MHz high precision timer.
- Console: colour dummy device 80x25
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 249416k/252788k available (3398k kernel code, 3292k reserved, 573k data, 144k init, 0k highmem)
- Warning! Unknown board id.
- ==================== Warning! The calculated loops_per_jiffy is not similar to the default one. ====================
- Mount-cache hash table entries: 512
- Checking for 'wait' instruction... available.
- ========== board id: 201 ==========
- [INFO] neptune mode...
- boot_param value: a0002800
- mode: 1
- size: 1200
- color1: 0x808010
- color2: 0x80806a
- color3: 0x8080af
- color4: 0x8080eb
- NET: Registered protocol family 16
- SCSI subsystem initialized
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- se init module major number = 254
- size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
- [user land] CmdBuf virt addr = 8f044000/af044000, phy addr=0f044000
- Hello, Realtek TLB Mapper
- squashfs: version 3.1 (2006/08/19) Phillip Lougher
- devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
- YAFFS Driver Rev:292241 (2010-01-19)
- YAFFS Driver is successfully installing.
- Initializing Cryptographic API
- Generic RTC Driver v1.07
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
- ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
- io scheduler noop registered
- RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize
- loop: loaded (max 8 devices)
- this MARS eth RX_OFFSET = 0x0
- 8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
- MAC address = 0x00.11.22.33.44.55
- eth0: RTL-8139C+ at 0xb8016000, 00:11:22:33:44:55, IRQ 2
- PPP generic driver version 2.4.2
- cp_hot
- [Audio Firmware Version] 299294
- [Binary src compiled at] Mar 9 2010 14:47:19
- plug
- PPP Deflate Compression module registered
- PPP BSD Compression module registered
- NET: Registered protocol family 24
- VenusSFC MTD init
- serial flash inaccessible
- physmap flash device: 10000000 at fd00000
- Realtek NAND Flash Driver Rev:293877 (2010-01-26)
- One TC58NVG1S3E chip has 1 die(s) on board
- nand part=TC58NVG1S3E, id=98da9015, device_size=268435456, chip_size=268435456, num_chips=1, isLastPage=0
- [rtk_nand_scan_bbt] have created bbt B0, just loads it !!
- [dump_BBT] Nand BBT Content
- Congratulation!! No BBs in this Nand.
- 4 cmdlinepart partitions found on MTD device rtk_nand
- RTK: using dynamic nand partition
- Creating 4 MTD partitions on "rtk_nand":
- 0x00000000-0x09f80000 : "Partition_000"
- 0x09f80000-0x0b720000 : "/"
- 0x0b720000-0x0f320000 : "/usr/local/etc"
- 0x0f320000-0x10000000 : "Partition_003"
- 0x00000000-0x10000000 : "disc"
- Realtek Nand Flash Driver is successfully installing.
- Initializing USB Mass Storage driver...
- usbcore: registered new driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.01:USB HID core driver
- mice: PS/2 mouse device common for all mice
- i2c /dev entries driver
- [I2C0] i2c speed changed to 100 KHz
- I2C0 Bus Status Check.... OK
- =========================
- = VER : 2.0a
- =========================
- = PHY : 0
- = MODE: MARS
- = SPD : 100
- = SAR : 0x024 (7 bits)
- = TX FIFO DEPTH : 8
- = RX FIFO DEPTH : 8
- = FIFO THRESHOLD: 4
- = BUS JAM RECORVER : ON
- = NON STOP WRITE : ON
- = SP PROTECT : ON
- =========================
- [I2C1] i2c speed changed to 100 KHz
- I2C1 Bus Status Check.... OK
- =========================
- = VER : 2.0a
- =========================
- = PHY : 1
- = MODE: MARS
- = SPD : 100
- = SAR : 0x024 (7 bits)
- = TX FIFO DEPTH : 8
- = RX FIFO DEPTH : 8
- = FIFO THRESHOLD: 4
- = BUS JAM RECORVER : ON
- = NON STOP WRITE : ON
- = SP PROTECT : ON
- =========================
- NET: Registered protocol family 2
- IP: routing cache hash table of 2048 buckets, 16Kbytes
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.
- cp_open
- alloc rings cp->rxdesc_buf =0xa0524000 , cp->ring_dma=0x524000
- init_hw
- init_hw finished
- RTK rtc can work.
- IP-Config: Complete:
- device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
- host=192.168.0.9, domain=, nis-domain=(none),
- bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- Freeing prom memory: 0kb freed
- Reclaim bootloader memory from 80020000 to 80100000
- Freeing unused kernel memory: 144k freed
- Welcome to Realtek Linux
- Please press Enter to activate this console. ------flush priority: 10
- flush_page_cache: do flush...
- ------flush priority: 10
- flush_page_cache: do flush...
- ------flush priority: 10
- flush_page_cache: do flush...
- ------flush priority: 10
- flush_page_cache: do flush...
- hotplug eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- Hotplug got one Net Hotplug of "LinkUP" from "eth0".
- yaffs: dev is 32505858 name is "mtdblock2"
- yaffs: Attempting MTD mount on 31.2, "mtdblock2"
- yaffs: auto selecting yaffs2
- Starting INET services....
- ------flush priority: 10
- flush_page_cache: do flush...
- libata version 1.12 loaded.
- sata driver initial...2009/12/30 14:50
- mars_init_sata(1255)dev_addr:c006f4f0
- ata_device_add(4891)probe begin
- Running dvdplayer with RootApp
- set corepath: /tmp/hdd/volumes/HDD1/
- scsi0 : SATA_DRV
- sata dma reset
- RootApp AVHDD version...
- enter 2nd case...
- ================================================
- ================================================
- root execute DvdPlayer...
- ================================================
- ================================================
- IN : /tmp/ramfs/smb
- downloader 0 starts, 0x10364e38
- downloader 1 starts, 0x10367028
- sata1: reset phy again!
- sata phy reset
- CMD: mkdir -p /tmp/netb/smb
- In my system...
- CMD: mkdir -p /tmp/smb
- In my system...
- CMD: ifconfig > /tmp/netb/samba_my_ip
- In my system...
- Warning!! the Mask is 255.0.0.0.
- file system 2, sector 4294966272
- mount to /tmp/hdd/volumes/HDD1
- file system 4, sector 262144
- mount to na
- file system 0, sector 0
- mount to /tmp/hdd/livepause
- file system 3, sector 262144
- mount to /tmp/hdd/root
- DB FILENAME = /tmp/ramfs/Setup
- [DataObject.cpp 399]DB Develop Version same . Don't be upgrade.
- [DataObject.cpp 438]DB Version same . Don't be upgrade.
- m_BookMark_Size=4096 m_Signature_Size=16
- GrandMa Revision: 299486
- (User ***256MB version...
- Input)Pipe Created.
- (Internal Event)Pipe Created.
- pli initiali Memory address 0x40000000
- zation...
- я
- 521 loadThemeSetting resource.cpp
- No THEMESET_INI exists
- Error in threshold value: 0...
- WatchDog does not receive signal for 2 seconds, value: 0
- open pli interface twice...
- [TVCTL] INFO, creating tuning thread
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 3813...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 1...
- map_fail is 0...
- _______ init ok!1. start remap DVR zone...
- ________
- fastmode is 100...
- map_done is 7...
- map_fail is 0...
- Video DebugMem PVIDEO_RPC_SetDebugMemory Called!1. start remap DVR zone...
- hysical Address fastmode is 100...
- = 0xf6fb000
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- [AUDIO WARNING]
- no more memory , do Remote Malloc. Size 0x000c0008
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- req: c0008, get: 100000
- reclaim size: 20000
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- -------------------
- Audio Version = 299294
- Common Version = 299240
- Build Date = Mar 9 2010
- Build Time = 14:47:19
- Note =
- -------------------
- [Video Firmware Version] 298488
- [Video Binary Built on] Mar 2 2010 17:03:47
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 1...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- sata1: reset phy again!
- sata phy reset
- VBM: configured to SD!
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- board = 14 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (1,0,0)
- Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0
- Bonding option process 0x00000009 to AUDIO_UNKNOWN_TYPE !!!
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- board = 14 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,1,0)
- Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0
- Bonding option process 0x0000001b to AUDIO_UNKNOWN_TYPE !!!
- ClassifyBonding DD 0x00008180
- board = 14 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,1,0)
- Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0
- Bonding option process 0x0000001c to AUDIO_UNKNOWN_TYPE !!!
- ClassifyBonding DD 0x00008180
- board = 14 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,1,0)
- Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0
- Bonding option process 0x0000001d to AUDIO_UNKNOWN_TYPE !!!
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- board = 14 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,0,1)
- Do you have key?(0 = no!) AC3 = 0, DTS = 0, WMA = 0
- Bonding option process 0x00000023 to AUDIO_UNKNOWN_TYPE !!!
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- ClassifyBonding DD 0x00008180
- High = 0x00000000, Low = 0x03c1b9ea
- The following Format is supported:
- MPEG
- LPCM
- WMA
- AAC
- VORBIS
- DV
- DTS HD
- WMA Pro
- MP4 LC-AAC
- MP4 HE-AAC
- RAW AAC
- ADPCM
- FLAC
- A Law PCM
- u Law PCM
- [VIDEO Capability]HighWord 0xffffffff, LowWord 0xffffffff
- [HDMI]: Set AVMute
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 98...
- map_fail is 0...
- ~~SetVideoStandard 1 1
- IN : /tmp/ramfs/usb/livepause
- IN : /tmp/ramfs/usb
- OUT : /tmp/ramfs/usb/livepause
- IN : /tmp/ramfs/usb/rec
- WARNING[2]:TVE i-underflow @ line 0
- [1;33m[SI DB ] err region undef. time offset match error cc=0
- [mll lastLCN:0
- [1;33m[SI DB ] err region undef. time offset match error cc=0
- [mll lastLCN:0
- Error in threshold value: 0...
- WatchDog does not receive signal for 2 seconds, value: 0
- WARNING:VIDEO_RPC_TVD_ToAgent_VBI_Ctrl_0_svc is a NULL function.
- [VIN] VIN_RPC_TVD_TOAGENT_VBI_CTRL, hr != S_OK !!!!!!!!!!!!
- [AIN] AIN_RPC_TOAGENT_CREATE_0 send successful, insID: 16
- start ao rpc config
- start ao rpc config spdif
- <APP> create start
- <APP> SmoothPlayback create
- <APP> N-DRC create, pin 0x00000000
- <APP> N-DRC create, pin 0x00000001
- <APP> N-DRC create, pin 0x00000002
- <APP> create end
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 198...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- PPAOUT output pin is pp pin
- [AIN] InitializeInputStatus 1 1 0
- [AUDIO WARNING]
- no more memory , do Remote Malloc. Size 0x00010008
- [VE] RPC_EN_TOA1. start remap DVR zone...
- GENT_ENC_INIT, ffastmode is 100...
- ormat: 1, sourcemap_done is 1...
- : 0, hr = S_OK
- map_fail is 0...
- Input Pin not co[AUDIO WARNING]
- no more memory , do Remote Malloc. Size 0x00010008
- nnected while pa1. start remap DVR zone...
- use
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- [AUDIO WARNING]
- no more memory , do Remote Malloc. Size 0x00004048
- [AUDIO WARNING]
- no more memory , do Remote Malloc. Size 0x00008008
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- [AE] RPC_TOAGENT_CREATE, hr = S_OK, agentID: 48
- [VE] SetRefClock, hr = S_OK
- [AE] SetRefClock, 1. start remap DVR zone...
- hr = S_OK
- [AIN] SetRefClock, hr = S_OK
- ************** connect
- fastmode is 100...
- map_done is 52...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 0...
- map_fail is 0...
- [AIN] RPC_CONNECT to AO, 32 16 5 0
- [AIN] RPC_CONNECT, hr = S_OK
- [AIN] AUDIO_RPC_TOAGENT_INITRINGBUFFERHEADER, numOfReadPtr: 1, listSize: 4
- [AIN] AUDIO_RPC_TOAGENT_INITRINGBUFFERHEADER, hr = S_OK
- [AE] AUDIO_RPC_TOAGENT_INITRINGBUFFERHEADER, input pin, listSize: 4, header: 7fa41798
- 1. start remap DVR zone...
- [AE] AUDIO_RPC_Tfastmode is 100...
- OAGENT_INITRINGBmap_done is 0...
- UFFERHEADER, hr map_fail is 0...
- = S_OK
- [AIN] RPC_CONNECT to AE, 48 16 5 2
- [AI1. start remap DVR zone...
- N] RPC_CONNECT, fastmode is 100...
- hr = S_OK
- [AINmap_done is 0...
- ] AUDIO_RPC_TOAGmap_fail is 0...
- ENT_INITRINGBUFFERHEADER, numOfReadPtr: 2, listSize: 4
- [AIN] AUDIO_RPC_TOAGENT_INITRINGBUFFERHEADER, hr = S_OK WARNING:[VIDEO] ENC SetResol[enter]
- WARNING:[VIDEO] ENC SetResol[return]
- [VE] RPC_TOAGENT_INITRINGBUFFEWARNING:RPC_TVD_ToAgent_TVD_Configure enters.
- R, header: eb29da0, hr = S_OK
- [VE] RPC_TOAGENT_INITRINGBUFFER, header: eb29d20, hr = S_OK
- [AE] AUDIO_RPC_TOAGENT_INITRINGBUFFERHEADER, out pin, listSize: 1
- [AE] AUDIO_RPC_TOAGENT_INITRINGBUFFERHEADER, hr = S_OK
- [AE] msg ring buf m_pMsgRingLower: 6ec58000, m_pMsgRingUpper: 6ec60000
- [AE] AUDIO_RPC_TOAGENT_INITRINGBUFFERHEADER, hr = S_OK
- [VE] RPC_TOAGENT_INITRINGBUFFER, header: eb29ca0, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETTF, 1 1, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETNR, 3 3, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETENCODEFORMAT, 1, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETRESOLUTION, hres: 720, SIF: 0, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETBITRATE, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETGOPSTRUCTURE, M: 3, N: 12, hr = S_OK
- [VE] RPC_EN_TOAGENT_CONFIGVOBU, 1, hr = S_OK
- [VIN] VIN_RPC_TVD_TOAGENT_TVD_CONFIGURE, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETTF, 0 0, hr = S_OK
- [VE] RPC_EN_TOAGENT_SETNR, 0 0, hr = S_OK
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- pal_i :VDPLineMode
- The External TVD is Live..!
- [AIN] AIN_RPC_TOAGENT_MUTE: 1......
- [AIN] AIN_RPC_TOAGENT_MUTE, hr = S_OK
- [AE] AUDIO_RPC_TOAGENT_PAUSE...
- [AE] AUDIO_RPC_TOAGENT_PAUSE, hr = S_OK
- [VE] RPC_TOAGENT_PAUSE....
- [VE] RPC_TOAGENT_PAUSE, hr = S_OK
- CVideoEncoderFilter:: ExternalTVD is running
- *** aout pause
- [AIN] ADC0_Config: 1 15 0 0, 48000 16
- [AIN] ADC0_Config, hr = S_OK
- [AIN] ADC1_Config: 1 15 0 0, 48000 16
- [AIN] ADC1_Config, hr = S_OK
- [AE] AUDIO_RPC_TOAGENT_RUN...
- [AE] AUDIO_RPC_TOAGENT_RUN, hr = S_OK
- [VE] RPC_TOAGENT_RUN....
- [VE] RPC_TOAGENT_RUN, hr = S_OK
- [AIN] AUDIO_RPC_TOAGENT_RUN
- [AIN] AUDIO_RPC_TOAGENT_RUN, hr = S_OK
- [AIN] AIN_RPC_TOAGENT_SWITCH_FOCUS: 0......
- [AIN] AIN_RPC_TOAGENT_SWITCH_FOCUS, hr = S_OK
- m_dtvApp->m_pCCDecoder == NULL
- 1. start remap DVR zone...
- WARNING:WSS to sys: (1, 0, 0, 0)
- fastmode is 100...
- map_done is 83...
- map_fail is 0...
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- req: 1d4000, get: 200000
- reclaim size: 20000
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- [VE] status: (1, 0, 0, 0, 3)
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 95...
- map_fail is 0...
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- req: 2c000, get: 40000
- reclaim size: 10000
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- IN : /tmp/net
- Create /tmp/net Ok!!!
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- In my system...
- Error in threshold value: 0...
- WatchDog does not receive signal for 2 seconds, value: 0
- GetDeviceUp 0 flag : 0x1043
- SetupClass::GetInstance()->GetNetEth0DHCPEnable() = 1
- Click eth0 DHCP IP and DNS
- In my system...
- [VE] notify FE_RECORD_NOSIGNAL
- In my system...
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- info, udhcpc (v0.9.9-pre) started
- [usb_param] setting for mars
- Setting for MARS-B
- [usb_param] set port two for host!
- [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- [usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- ehci_hcd ehci_hcd: EHCI Host Controller
- ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
- ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
- ehci_hcd ehci_hcd: park 0
- ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- hub : individual port power switching
- hub : individual port over-current protection
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- ifconfig eth0 169.254.1.58
- [cfyeh] set PPE = 0
- WARNING:WSS to sys: (1, 0, 0, 0)
- [usb_param] setting for mars
- Setting for MARS-B
- [VE] status: (1, 0, 0, 0, 3)
- [usb_param] set port two for host!
- [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- [usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- ohci_hcd ohci_hcd: OHCI Host Controller
- ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
- ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
- route add -net 0.0.0.0 netmask 0.0.0.0 eth0
- usb 1-1: new high speed USB device using ehci_hcd and address 2
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- hub : no power switching (usb 1.0)
- hub : no over-current protection
- debug, Sending discover...
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- sata1: reset phy extra!
- sata phy reset
- debug, Sending select for 192.168.1.2...
- In my system...
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- hub : ganged power switching
- hub : global over-current protection
- This is the current time: PowerUP_Done!!!
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- [HDMI]: MARS HDMI is running...
- [HDMI]: Disable HDCP
- [HDMI]: Hotplug Change !!! -1 -> 0
- IMSAP got usb update command ......command->type=-51
- Key processed.
- info, Lease of 192.168.1.2 obtained, lease time 86400
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 2 ,msg len = 7 ,msg = 65 74 68 30 20 55 50 00
- >>>>>>>>>> RECORDING : FE_RECORD_NOSIGNAL
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 6 ,msg len = 4 ,msg = 31 20 55 50 00 00 00 00
- Hotplug got one USB Hotplug of "Add" from portusb 1-1.3: new high speed USB device using ehci_hcd and address 3
- "1".
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- [VIN] VIN_RPC_TVD_TOAGENT_BLUE_SCREEN_CTRL, hr = S_OK
- WARNING:Scan Starts!
- WARNING:Scan returns!
- [VIN] VIN_RPC_TVD_TOAGENT_CHANGECHANNEL_START, hr = S_OK
- [VIN] VIN_RPC_TVD_TOAGENT_BLUE_SCREEN_CTRL, hr = S_OK
- [AIN] AIN_RPC_TOAGENT_MUTE: 0......
- [AIN] AIN_RPC_TOAGENT_MUTE, hr = S_OK
- IMSAP got usb update command ......command->type=-51
- Key processed.
- IMSAP got usb update command ......command-><APP> switch focus: 0xfffffffe -> 0x00000000
- type=-51
- Key processed.
- IMSAP got usb update command ......command->type=-51
- Key processed.
- IMSAP got usb update command ......command->type=-51
- Key processed.
- Key processed.
- IMSAP got usb update command ......command->type=-51
- Key processed.
- IMSAP got usb update command ......command->type=-51
- Key processed.
- scsi2 : SCSI emulation for USB Mass Storage devices
- [DAC 0x0000bb80 -> 0x0000bb80]
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- IMSAP got usb update command ......command->type=-51
- Key processed.
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 6 ,msg len = 6 ,msg = 31 2E 33 20 55 50 00 00
- Hotplug got one USB Hotplug of "Add" from port "1.3".
- 0 usb block device found
- No Recording Partition Available !!!!!!
- No Timeshift Partition Available !!!!!!
- IMSAP got usb update command ......command->type=-51
- Key processed.
- deleting routers
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- adding dns 192.168.1.1
- watchdog test pid 183, threshold: 50
- DNS IP : 127. 0. 0. 1
- nameserver 127.0.0.1
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- sata1: reset phy extra!
- sata phy reset
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- Vendor: Generic Model: STORAGE DEVICE Rev: 9451
- Type: Direct-Access ANSI SCSI revision: 00
- Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
- Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- rmdir: `/var/lock/hotplug/mount_tmp/.sda': No such file or directory
- modprobe: module sd_mod not found.
- modprobe: failed to load module sd_mod
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- ufsd: no version for "struct_module" found: kernel tainted.
- ufsd: module license 'Commercial product' taints kernel.
- ufsd: driver 8.1 (002_I) LBD=ON with ioctl loaded at c0129000
- NTFS read/write support included
- mount: Mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No medium found
- mount: Mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No such device
- mount: Mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No medium found
- mount: Mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No medium found
- mount: Mounting /var/lock/hotplug/mount_tmp/.sda on /mnt/usbmounts/sda failed: Invalid argument
- WARNING:WSS to sys: (1, 0, 0, 0)
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 4 ,msg len = 23 ,msg = 73 64 61 20 52 45 41 44
- ACTION: READY ==> host2, USB, 1.3 !!
- USB BLOCK : UPDATE !!
- Force passing to IMSAP
- Key processed.
- IMSAP got usb update command ......command->type=-50
- Key processed.
- Hotplug: "sda" has no partition.
- Hotplug: mount -t ufsd -o ro -o nls=utf8 -o umask=0 /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: mount -t ext3 -o ro /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: Mount --move "/mnt/usbmounts/sda" fail.
- reserve 2, name: sda
- cmd_buffer: echo /dev/scsi/host2/bus0/target0/lun0/disc > /tmp/ramfs/volumes/C:
- Hotplug got one BLOCK Hotplug of "Ready" from "sda"
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- sata1: reset phy extra!
- sata phy reset
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- sata1: phy reset timeout!
- sata1: no device found (phy stat 00000000)
- sata1: ata_bus_probe failed
- scsi1 : SATA_DRV
- sata dma reset
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- sata2: reset phy again!
- sata phy reset
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- sata2: reset phy again!
- sata phy reset
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- sata2: phy reset timeout!
- sata2: no device found (phy stat 00000000)
- sata2: ata_bus_probe failed
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- aWARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- aaaaaaaaaawatchdog test pid 183, threshold: 50
- aaaaaWARNING:WSS to sys: (1, 0, 0, 0)
- a[VE] status: (1, 0, 0, 0, 3)
- aaaaaaaaaaaaaaaWARNING:WSS to sys: (1, 0, 0, 0)
- a[VE] status: (1, 0, 0, 0, 3)
- aWARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- BusyBox v1.1.3 (2010.02.23-03:54+0000) Built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- / # watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- watchdog test pid 183, threshold: 50
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- Key processed.
- org change count = 0 , total change count = 5
- <APP> switch focus: 0x00000000 -> 0xfffffffe
- WARNING:WSS to sys: (1, 0, 0, 0)
- [VE] status: (1, 0, 0, 0, 3)
- [AE] AUDIO_RPC_TOAGENT_PAUSE...
- [AE] AUDIO_RPC_TOAGENT_PAUSE, hr = S_OK
- [VE] RPC_TOAGENT_PAUSE....
- [VE] RPC_TOAGENT_PAUSE, hr = S_OK
- CVideoEncoderFilter:: ExternalTVD is running
- state force paused
- [AE] AUDIO_RPC_TOAGENT_STOP...
- [AE] AUDIO_RPC_TOAGENT_STOP, hr = S_OK
- [VE] RPC_TOAGENT_STOP....
- [VE] RPC_TOAGENT_STOP, hr = S_OK
- state force stoped
- [AIN] AUDIO_RPC_TOAGENT_STOP
- [AIN] AUDIO_RPC_TOAGENT_STOP, hr = S_OK
- flow: dvbApp DestroyFlow st
- flo<APP> delete start
- <APP> SmoothPlayback delete
- <APP> N-DRC delete, pin 0x00000000
- <APP> N-DRC delete, pin 0x00000001
- <APP> N-DRC delete, pin 0x00000002
- <APP> delete end
- w: dvbApp DestroyFlow st
- [AUDIO WARNING]
- no more memory , do Remote Free
- [AUDIO WARNING]
- no more memory , do Remote Malloc. Size 0x000c0008
- 1. start remap DVR zone...
- fastmode is 100...
- map_done is 1187...
- map_fail is 0...
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- req: c0008, get: 100000
- reclaim size: 20000
- =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- [AUDIO WARNING]
- no more memory , do Remote Free
- [AUDIO WARNING]
- no more memory , do Remote Free
- [AUDIO WARNING]
- no more memory , do Remote Free
- [AUDIO WARNING]
- no more memory , do Remote Free
- _________NIkkey adde _______
- MediaLoaderThread stopped
- !!!!!!!!!!!!!!!!!!! CMD_TERMINATE received
- watchdog test pid 183, threshold: 50
- ______[DestoryTTSurface] AbstractAP.cpp 1231______
- In my system...
- VIDEO_RPC_VideoDestroy Called!VBM: deleting GOB id=9 ...
- VBM: deleting GOB id=8 ...
- VBM: deleting GOB id=7 ...
- VBM: deleting GOB id=6 ...
- VBM: deleting GOB id=5 ...
- VBM: deleting GOB id=4 ...
- VBM: deleting GOB id=3 ...
- VBM: deleting GOB id=2 ...
- VBM: deleting GOB id=1 ...
- VBM: deleting GOB id=0 ...
- [AUDIO WARNING]
- no more memory , do Remote Free
- VIDEO_RPC_VideoHalt Called!
- Entering Suspend Mode ..
- Delete Network
- Normal Kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 278
- not be killed pid file = 278 check /proc/ file = 278 ,
- Normal Kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 278
- Success to kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 278
- In my system...
- watchdog test pid 183, threshold: 50
- watchdog test pid 183, threshold: 50
- WatchDog does not receive signal for 2 seconds, value: 41
- [DataObject.cpp 619] database compact ok!!
- clear pli setting....
- pli initializati***256MB version...
- on...
- Memory address 0x40000000
- remount RO: ...
- chip id: 1283: Mars...
- 5280 wait5280 wai
- >>>>>> Got NAND Flash device!
- fw_desc_table_v1->signature=VERONA__
- fw_desc_table_v1->version=0x1
- fw_desc_table_v1->part_list_len=0xc0
- data_buf = 0x10006868
- fw_desc_table_v1 = 0x10006868
- sizeof(fw_desc_table_v1_t) = 0x20
- part_entry = 0x10006888
- part_count= 0x4
- fw_entry = 0x10006948
- FW type, 0x2!
- Audio FW found!
- Video FW found!
- audio_fw_entry->offset = 0x1440000
- audio_fw_entry->length = 0x1b6368
- audio_fw_entry->target_addr = 0x81b00000
- read len = 0x1b6368
- video_fw_entry->offset = 0x1600000
- video_fw_entry->length = 0x22c1d8
- video_fw_entry->target_addr = 0x81d80000
- read len = 0x22c1d8
- [RPC]open for RPC ioctl...
- [RPC]start reset...
- [RPC]done...
- release address: 81a00000
- termination code: 99
- Checking irrp...
- sata module is ready for service.
- 1
- show_offline_dev_field(1310)dev_addr=c006f4f0;
- sata1 :device0 not found
- sata2 :device1 not found
- mars_sata_work_fn
- device removed from sata port0
- mars_sata_work_fn(1141): no cmd Q
- mars_sata_work_fn(1172) hot plug end
- device removed from sata port1
- mars_sata_work_fn(1141): no cmd Q
- mars_sata_work_fn(1172) hot plug end
- sata device have removed.
- ohci_hcd ohci_hcd: remove, state 1
- usb usb2: USB disconnect, address 1
- ohci_hcd ohci_hcd: USB bus 2 deregistered
- ehci_hcd ehci_hcd: remove, state 1
- usb usb1: USB disconnect, address 1
- usb 1-1: USB disconnect, address 2
- usb 1-1.3: USB disconnect, address 3
- __scsi_remove_device(886)
- ehci_hcd ehci_hcd: USB bus 1 deregistered
- enter power saving mode...
- Hotplug got one USB Hotplug of "Remove" from port "1.3".
- Hotplug got one USB Hotplug of "Remove" from port "1".
- Hotplug: Cannot Stopping tasks: find "/mnt/usbmo=unts/sda".
- cmd_=buffer: rm -rf /=tmp/ramfs/volume=s/C:
- cmd_buffe=r: rm -rf /tmp/r===amfs/labels/C:
- =
- Hotplug got one= BLOCK Hotplug o=f "Clear" from "=sda"
- ==========|
- Freeing memory...
- try_to_free_pages: free 1544
- try_to_free_pages: free 988
- try_to_free_pages: free 806
- try_to_free_pages: free 0
- done (3338 pages freed)
- generic_sata_suspend
- sata1 :no device found on port0
- sata2 :no device found on port1
- generic_sata_suspend(307)suspend finish
- cp_close
- free rings cp->rxdesc_buf =0xa0524000
- RTC time: 6 20 1 1 59
- Alarm time: c 28 3 10
- 12V5V_GPIO setting=1000002c
- options=0
- hwinfo=2
- powerkey_irrp=fd20bf00
- ejectkey_irrp=e817fc03
- powerkey_gpio=58
- ejectkey_gpio=-1
- vfd_type=0
- a0...........
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement