API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 7th, 2011
106
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.96 KB | None | 0 0
raw download clone embed print report
  1. Linux version 2.6.33.3-tinycore (root@box) (gcc version 4.2.2) #2012 SMP Wed May 12 17:05:42 EEST 2010
  2. BIOS-provided physical RAM map:
  3. BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
  4. BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  5. BIOS-e820: 0000000000100000 - 0000000007d80000 (usable)
  6. BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
  7. Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
  8. DMI not present or invalid.
  9. last_pfn = 0x7d80 max_arch_pfn = 0x100000
  10. initial memory mapped : 0 - 00800000
  11. init_memory_mapping: 0000000000000000-0000000007d80000
  12. 0000000000 - 0007d80000 page 4k
  13. kernel direct mapping tables up to 7d80000 @ 7000-2a000
  14. RAMDISK: 07552000 - 07d5e646
  15. ACPI Error: A valid RSDP was not found (20091214/tbxfroot-219)
  16. 0MB HIGHMEM available.
  17. 125MB LOWMEM available.
  18. mapped low ram: 0 - 07d80000
  19. low ram: 0 - 07d80000
  20. node 0 low ram: 00000000 - 07d80000
  21. node 0 bootmap 00025000 - 00025fb0
  22. (10 early reservations) ==> bootmem [0000000000 - 0007d80000]
  23. #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  24. #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
  25. #2 [0000100000 - 00005ab764] TEXT DATA BSS ==> [0000100000 - 00005ab764]
  26. #3 [0007552000 - 0007d5e646] RAMDISK ==> [0007552000 - 0007d5e646]
  27. #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
  28. #5 [00005ac000 - 00005ae000] BRK ==> [00005ac000 - 00005ae000]
  29. #6 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
  30. #7 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
  31. #8 [0000007000 - 0000025000] PGTABLE ==> [0000007000 - 0000025000]
  32. #9 [0000025000 - 0000026000] BOOTMAP ==> [0000025000 - 0000026000]
  33. Zone PFN ranges:
  34. DMA 0x00000000 -> 0x00001000
  35. Normal 0x00001000 -> 0x00007d80
  36. HighMem 0x00007d80 -> 0x00007d80
  37. Movable zone start PFN for each node
  38. early_node_map[2] active PFN ranges
  39. 0: 0x00000000 -> 0x000000a0
  40. 0: 0x00000100 -> 0x00007d80
  41. On node 0 totalpages: 32032
  42. free_area_init_node: node 0, pgdat c04e2480, node_mem_map c1001000
  43. DMA zone: 32 pages used for memmap
  44. DMA zone: 0 pages reserved
  45. DMA zone: 3968 pages, LIFO batch:0
  46. Normal zone: 219 pages used for memmap
  47. Normal zone: 27813 pages, LIFO batch:7
  48. Using APIC driver default
  49. SMP: Allowing 1 CPUs, 0 hotplug CPUs
  50. No local APIC present or hardware disabled
  51. APIC: disable apic facility
  52. APIC: switched to apic NOOP
  53. nr_irqs_gsi: 16
  54. PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  55. PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  56. Allocating PCI resources starting at 7d80000 (gap: 7d80000:f8270000)
  57. Booting paravirtualized kernel on bare hardware
  58. setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
  59. PERCPU: Embedded 12 pages/cpu @c1104000 s27352 r0 d21800 u65536
  60. pcpu-alloc: s27352 r0 d21800 u65536 alloc=16*4096
  61. pcpu-alloc: [0] 0
  62. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 31781
  63. Kernel command line: initrd=/boot/tinycore.gz quiet BOOT_IMAGE=/boot/bzImage waitusb=15
  64. PID hash table entries: 512 (order: -1, 2048 bytes)
  65. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  66. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  67. Initializing CPU#0
  68. Initializing HighMem for node 0 (00000000:00000000)
  69. Memory: 113596k/128512k available (2807k kernel code, 14372k reserved, 1194k data, 404k init, 0k highmem)
  70. virtual kernel memory layout:
  71. fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
  72. pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  73. vmalloc : 0xc8580000 - 0xff7fe000 ( 882 MB)
  74. lowmem : 0xc0000000 - 0xc7d80000 ( 125 MB)
  75. .init : 0xc04e9000 - 0xc054e000 ( 404 kB)
  76. .data : 0xc03bde40 - 0xc04e88b0 (1194 kB)
  77. .text : 0xc0100000 - 0xc03bde40 (2807 kB)
  78. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  79. Hierarchical RCU implementation.
  80. NR_IRQS:512
  81. Console: colour VGA+ 80x25
  82. console [tty0] enabled
  83. Fast TSC calibration using PIT
  84. Detected 300.645 MHz processor.
  85. Calibrating delay loop (skipped), value calculated using timer frequency.. 601.34 BogoMIPS (lpj=1002150)
  86. Mount-cache hash table entries: 512
  87. Working around Cyrix MediaGX virtual DMA bugs.
  88. Enable Memory-Write-back mode on Cyrix/NSC processor.
  89. Enable Memory access reorder on Cyrix/NSC processor.
  90. Performance Events:
  91. Checking 'hlt' instruction... OK.
  92. SMP alternatives: switching to UP code
  93. Freeing SMP alternatives: 11k freed
  94. weird, boot CPU (#0) not listed by the BIOS.
  95. SMP motherboard not detected.
  96. Local APIC not detected. Using dummy APIC emulation.
  97. SMP disabled
  98. Brought up 1 CPUs
  99. Total of 1 processors activated (601.34 BogoMIPS).
  100. NET: Registered protocol family 16
  101. PCI: PCI BIOS revision 2.10 entry at 0xfb1a0, last bus=0
  102. PCI: Using configuration type 1 for base access
  103. bio: create slab <bio-0> at 0
  104. ACPI: Interpreter disabled.
  105. vgaarb: loaded
  106. SCSI subsystem initialized
  107. libata version 3.00 loaded.
  108. usbcore: registered new interface driver usbfs
  109. usbcore: registered new interface driver hub
  110. usbcore: registered new device driver usb
  111. PCI: Probing PCI hardware
  112. PCI: Probing PCI hardware (bus 00)
  113. pci 0000:00:0e.0: reg 10: [mem 0xd1020000-0xd1020fff]
  114. pci 0000:00:0e.0: reg 14: [io 0xe000-0xe03f]
  115. pci 0000:00:0e.0: reg 18: [mem 0xd1000000-0xd101ffff]
  116. pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x000fffff pref]
  117. pci 0000:00:0e.0: supports D1 D2
  118. pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
  119. pci 0000:00:0e.0: PME# disabled
  120. pci 0000:00:12.1: reg 10: [mem 0x40012000-0x400120ff]
  121. pci 0000:00:12.2: reg 20: [io 0xf000-0xf00f]
  122. pci 0000:00:12.3: reg 10: [mem 0x40011000-0x4001107f]
  123. pci 0000:00:12.4: reg 10: [mem 0x40800000-0x40ffffff]
  124. pci 0000:00:13.0: reg 10: [mem 0xd1024000-0xd1024fff]
  125. vgaarb: device added: PCI:0000:00:12.4,decodes=io+mem,owns=io+mem,locks=none
  126. pci 0000:00:12.0: NatSemi IRQ router [1078:0100]
  127. PCI: pci_cache_line_size set to 32 bytes
  128. Switching to clocksource tsc
  129. pnp: PnP ACPI: disabled
  130. PnPBIOS: Scanning system for PnP BIOS support...
  131. PnPBIOS: Found PnP BIOS installation structure at 0xc00fbd20
  132. PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbd48, dseg 0xf0000
  133. pnp 00:07: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:0e.0 BAR 6 [mem 0x00000000-0x000fffff pref]
  134. pnp 00:08: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:0e.0 BAR 6 [mem 0x00000000-0x000fffff pref]
  135. pnp 00:08: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:0e.0 BAR 6 [mem 0x00000000-0x000fffff pref]
  136. pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:0e.0 BAR 6 [mem 0x00000000-0x000fffff pref]
  137. pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:0e.0 BAR 6 [mem 0x00000000-0x000fffff pref]
  138. pnp 00:0c: disabling [mem 0x000e0000-0x000effff] because it overlaps 0000:00:0e.0 BAR 6 [mem 0x00000000-0x000fffff pref]
  139. PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
  140. system 00:07: [mem 0x40010000-0x40010fff] has been reserved
  141. system 00:07: [mem 0x40008000-0x4000ffff] has been reserved
  142. system 00:07: [mem 0x40018000-0x407fffff] has been reserved
  143. system 00:07: [mem 0x41000000-0x41017fff] has been reserved
  144. system 00:07: [mem 0xfffc0000-0xffffffff] could not be reserved
  145. system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
  146. system 00:07: [mem 0x00100000-0x07d7ffff] could not be reserved
  147. system 00:0d: [io 0x0370-0x0371] has been reserved
  148. pci 0000:00:0e.0: BAR 6: assigned [mem 0x08000000-0x080fffff pref]
  149. pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
  150. pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
  151. NET: Registered protocol family 2
  152. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  153. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  154. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  155. TCP: Hash tables configured (established 4096 bind 4096)
  156. TCP reno registered
  157. UDP hash table entries: 128 (order: 0, 4096 bytes)
  158. UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  159. NET: Registered protocol family 1
  160. RPC: Registered udp transport module.
  161. RPC: Registered tcp transport module.
  162. RPC: Registered tcp NFSv4.1 backchannel transport module.
  163. pci 0000:00:0e.0: Firmware left e100 interrupts enabled; disabling
  164. pci 0000:00:12.4: Boot video device
  165. PCI: CLS 32 bytes, default 32
  166. Trying to unpack rootfs image as initramfs...
  167. Freeing initrd memory: 8241k freed
  168. fuse init (API version 7.13)
  169. msgmni has been set to 238
  170. alg: No test for stdrng (krng)
  171. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  172. io scheduler noop registered
  173. io scheduler deadline registered (default)
  174. isapnp: Scanning for PnP cards...
  175. isapnp: No Plug & Play device found
  176. Real Time Clock Driver v1.12b
  177. Non-volatile memory driver v1.3
  178. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  179. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  180. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  181. 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  182. 00:12: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  183. FDC 0 is a post-1991 82077
  184. brd: module loaded
  185. input: Macintosh mouse button emulation as /devices/virtual/input/input0
  186. Uniform Multi-Platform E-IDE driver
  187. cs5530 0000:00:12.2: IDE controller (0x1078:0x0102 rev 0x00)
  188. pci 0000:00:12.0: setting latency timer to 64
  189. cs5530 0000:00:12.2: not 100% native mode: will probe irqs later
  190. ide0: BM-DMA at 0xf000-0xf007
  191. ide1: BM-DMA at 0xf008-0xf00f
  192. Probing IDE interface ide0...
  193. hdb: _NEC CD-RW NR-7800A, ATAPI CD/DVD-ROM drive
  194. hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
  195. hdb: UDMA/33 mode selected
  196. Probing IDE interface ide1...
  197. ide1: Wait for ready failed before probe !
  198. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 (serialized)
  199. ide1 at 0x170-0x177,0x376 on irq 15 (serialized)
  200. ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
  201. ide-gd driver 1.18
  202. ide-cd driver 5.00
  203. ide-cd: hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
  204. Uniform CD-ROM driver Revision: 3.20
  205. PPP generic driver version 2.4.2
  206. PPP Deflate Compression module registered
  207. NET: Registered protocol family 24
  208. tun: Universal TUN/TAP device driver, 1.6
  209. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  210. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  211. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  212. PCI: setting IRQ 10 as level-triggered
  213. ohci_hcd 0000:00:13.0: found PCI INT A -> IRQ 10
  214. ohci_hcd 0000:00:13.0: OHCI Host Controller
  215. ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
  216. ohci_hcd 0000:00:13.0: irq 11, io mem 0xd1024000
  217. hub 1-0:1.0: USB hub found
  218. hub 1-0:1.0: 2 ports detected
  219. uhci_hcd: USB Universal Host Controller Interface driver
  220. Initializing USB Mass Storage driver...
  221. usbcore: registered new interface driver usb-storage
  222. USB Mass Storage support registered.
  223. usbcore: registered new interface driver ums-alauda
  224. usbcore: registered new interface driver ums-cypress
  225. usbcore: registered new interface driver ums-freecom
  226. usbcore: registered new interface driver ums-isd200
  227. usbcore: registered new interface driver ums-jumpshot
  228. usbcore: registered new interface driver ums-karma
  229. usbcore: registered new interface driver ums-onetouch
  230. usbcore: registered new interface driver ums-sddr09
  231. usbcore: registered new interface driver ums-sddr55
  232. usbcore: registered new interface driver ums-usbat
  233. usbcore: registered new interface driver berry_charge
  234. PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
  235. PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  236. serio: i8042 KBD port at 0x60,0x64 irq 1
  237. mice: PS/2 mouse device common for all mice
  238. usbcore: registered new interface driver appletouch
  239. usbcore: registered new interface driver bcm5974
  240. cpuidle: using governor ladder
  241. cpuidle: using governor menu
  242. padlock: VIA PadLock not detected.
  243. padlock: VIA PadLock Hash Engine not detected.
  244. usbcore: registered new interface driver hiddev
  245. usbcore: registered new interface driver usbhid
  246. usbhid: USB HID core driver
  247. ip_tables: (C) 2000-2006 Netfilter Core Team
  248. TCP cubic registered
  249. NET: Registered protocol family 17
  250. NET: Registered protocol family 15
  251. Using IPI No-Shortcut mode
  252. Freeing unused kernel memory: 404k freed
  253. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  254. usb 1-2: new low speed USB device using ohci_hcd and address 2
  255. input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input2
  256. generic-usb 0003:046D:C03D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2/input0
  257. usb 1-1: new full speed USB device using ohci_hcd and address 3
  258. scsi0 : usb-storage 1-1:1.0
  259. scsi 0:0:0:0: Direct-Access USB 2.0 Flash Disk 2.10 PQ: 0 ANSI: 2
  260. sd 0:0:0:0: Attached scsi generic sg0 type 0
  261. sd 0:0:0:0: [sda] 4124160 512-byte logical blocks: (2.11 GB/1.96 GiB)
  262. sd 0:0:0:0: [sda] Write Protect is off
  263. sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
  264. sd 0:0:0:0: [sda] Assuming drive cache: write through
  265. sd 0:0:0:0: [sda] Assuming drive cache: write through
  266. sda:
  267. sd 0:0:0:0: [sda] Assuming drive cache: write through
  268. sd 0:0:0:0: [sda] Attached SCSI removable disk
  269. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  270. e100: Copyright(c) 1999-2006 Intel Corporation
  271. PCI: setting IRQ 11 as level-triggered
  272. e100 0000:00:0e.0: found PCI INT A -> IRQ 11
  273. e100 0000:00:0e.0: PME# disabled
  274. e100: eth0: e100_probe: addr 0xd1020000, irq 10, MAC addr 00:07:32:00:29:60
  275. loop: module loaded
  276. ramzswap: num_devices not specified. Using default: 1
  277. ramzswap: disk size not provided. You can use disksize_kb module param to specify size.
  278. Using default: (25% of RAM).
  279. ramzswap: /dev/ramzswap0 initialized: disksize_kb=30600
  280. Adding 30592k swap on /dev/ramzswap0. Priority:-1 extents:1 across:30592k SS
  281. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  282. ISO 9660 Extensions: Microsoft Joliet Level 3
  283. ISO 9660 Extensions: RRIP_1991A
  284. e100 0000:00:0e.0: firmware: requesting e100/d101s_ucode.bin
  285. e100: eth0 NIC Link is Up 100 Mbps Full Duplex
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!