Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- switch#show ver | inc C2960c405-UNIVERSALK9-M
- Cisco IOS Software, C2960C Software (C2960c405-UNIVERSALK9-M), Version 15.0(2)SE5, RELEASE SOFTWARE (fc1)
- * 1 14 WS-C2960C-12PC-L 15.0(2)SE5 C2960c405-UNIVERSALK9-M
- switch#
- switch#show run int g0/1
- Load for five secs: 4%/0%; one minute: 6%; five minutes: 6%
- Time source is NTP, 09:31:02.475 CET Thu Mar 20 2014
- Building configuration...
- Current configuration : 304 bytes
- !
- interface GigabitEthernet0/1
- switchport mode access
- switchport nonegotiate
- media-type rj45
- no mdix auto
- spanning-tree portfast
- end
- switch#show run int g0/2
- Load for five secs: 5%/0%; one minute: 6%; five minutes: 6%
- Time source is NTP, 09:31:03.406 CET Thu Mar 20 2014
- Building configuration...
- Current configuration : 304 bytes
- !
- interface GigabitEthernet0/2
- switchport mode access
- switchport nonegotiate
- media-type rj45
- no mdix auto
- spanning-tree portfast
- end
- switch#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- switch(config)#int range g0/1 - 2
- switch(config-if-range)#shutdown
- switch(config-if-range)#
- Mar 20 09:31:16.526: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
- Mar 20 09:31:16.534: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
- switch(config-if-range)#
- switch(config-if-range)#mdix auto
- switch(config-if-range)#no shutdown
- switch(config-if-range)#
- Mar 20 09:31:36.508: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
- Mar 20 09:31:36.516: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
- Mar 20 09:31:38.915: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
- Mar 20 09:31:38.915: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
- Mar 20 09:31:39.922: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
- Mar 20 09:31:39.922: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up
- switch(config-if-range)#
- switch(config-if-range)#no mdix auto
- switch(config-if-range)#
- Mar 20 09:31:46.163: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
- Mar 20 09:31:46.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
- Mar 20 09:31:47.169: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
- Mar 20 09:31:47.169: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
- switch(config-if-range)#
- switch(config-if-range)#
- switch(config-if-range)#mdix auto
- switch(config-if-range)#
- Mar 20 09:32:17.243: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
- Mar 20 09:32:17.243: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
- Mar 20 09:32:18.249: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
- Mar 20 09:32:18.249: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up
- switch(config-if-range)#
- switch(config-if-range)#no mdix auto
- switch(config-if-range)#
- Mar 20 09:37:40.430: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
- Mar 20 09:37:40.439: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
- Mar 20 09:37:41.437: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
- Mar 20 09:37:41.437: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
- switch(config-if-range)#
- switch(config-if-range)#
- switch(config-if-range)#do show interfaces status | excl ^Fa
- Load for five secs: 5%/0%; one minute: 6%; five minutes: 6%
- Time source is NTP, 09:38:03.851 CET Thu Mar 20 2014
- Port Name Status Vlan Duplex Speed Type
- Gi0/1 notconnect 1 auto auto 10/100/1000BaseTX
- Gi0/2 notconnect 1 auto auto 10/100/1000BaseTX
- switch(config-if-range)#
- switch(config-if-range)#mdix auto
- switch(config-if-range)#
- Mar 20 09:38:11.468: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
- Mar 20 09:38:11.468: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
- Mar 20 09:38:12.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
- Mar 20 09:38:12.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up
- switch(config-if-range)#
- switch(config-if-range)#
- switch(config-if-range)#do show interfaces status | excl ^Fa
- Load for five secs: 6%/0%; one minute: 6%; five minutes: 6%
- Time source is NTP, 09:38:17.273 CET Thu Mar 20 2014
- Port Name Status Vlan Duplex Speed Type
- Gi0/1 connected 1 a-full a-1000 10/100/1000BaseTX
- Gi0/2 connected 1 a-full a-1000 10/100/1000BaseTX
- switch(config-if-range)#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement