API tools faq
paste
hedz09

beagleboneblack ubuntu touch init fail

hedz09
Mar 18th, 2014
180
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.10 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.10-dirty (Mar 04 2014 - 23:10:15)
  2. reading args
  3. spl: error reading image args, err - -1
  4. reading u-boot.img
  5. reading u-boot.img
  6.  
  7.  
  8. U-Boot 2013.10-dirty (Mar 04 2014 - 23:10:15)
  9.  
  10. I2C: ready
  11. DRAM: 512 MiB
  12. WARNING: Caches not enabled
  13. NAND: 0 MiB
  14. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  15. *** Warning - readenv() failed, using default environment
  16.  
  17. Net: <ethaddr> not set. Validating first E-fuse MAC
  18. cpsw, usb_ether
  19. Hit any key to stop autoboot: 1  0
  20. gpio: pin 53 (gpio 53) value is 1
  21. mmc0 is current device
  22. gpio: pin 54 (gpio 54) value is 1
  23. SD/MMC found on device 0
  24. reading uEnv.txt
  25. 584 bytes read in 4 ms (142.6 KiB/s)
  26. Importing environment from mmc ...
  27. gpio: pin 55 (gpio 55) value is 1
  28. Checking if uenvcmd is set ...
  29. gpio: pin 56 (gpio 56) value is 1
  30. Running uenvcmd ...
  31. reading zImage
  32. 3977776 bytes read in 393 ms (9.7 MiB/s)
  33. reading am335x-boneblack.dtb
  34. 24996 bytes read in 8 ms (3 MiB/s)
  35. Kernel image @ 0x80200000 [ 0x000000 - 0x3cb230 ]
  36. ## Flattened Device Tree blob at 815f0000
  37. Booting using the fdt blob at 0x815f0000
  38. Using Device Tree in place at 815f0000, end 815f91a3
  39.  
  40. Starting kernel ...
  41.  
  42. Uncompressing Linux... done, booting the kernel.
  43. [ 0.000000] Booting Linux on physical CPU 0x0
  44. [ 0.000000] Initializing cgroup subsys cpu
  45. [ 0.000000] Linux version 3.8.13-bone41 (fouad_hassouneh@DevOps) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Mar 5 09:44:24 NST 2014
  46. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
  47. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  48. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  49. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  50. [ 0.000000] AM335X ES1.0 (neon )
  51. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0d15000 s14080 r8192 d14592 u36864
  52. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  53. [ 0.000000] Kernel command line: consoleblank=0 console=ttyO0,115200n8 androidboot.console=ttyO0 mem=512M root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait init=/init ip=off video=480x272-16@56 g_ffs.idVendor=0x18d1 g_ffs.idProduct=0x4e26 qemu=1 vt.global_cursor_default=0
  54. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  55. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  56. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  57. [ 0.000000] __ex_table already sorted, skipping sort
  58. [ 0.000000] allocated 1048576 bytes of page_cgroup
  59. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  60. [ 0.000000] Memory: 511MB = 511MB total
  61. [ 0.000000] Memory: 508380k/508380k available, 15908k reserved, 0K highmem
  62. [ 0.000000] Virtual kernel memory layout:
  63. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  64. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  65. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  66. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  67. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  68. [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
  69. [ 0.000000] .text : 0xc0008000 - 0xc07bcdfc (7892 kB)
  70. [ 0.000000] .init : 0xc07bd000 - 0xc07f8700 ( 238 kB)
  71. [ 0.000000] .data : 0xc07fa000 - 0xc088c6f0 ( 586 kB)
  72. [ 0.000000] .bss : 0xc088c6f0 - 0xc090408c ( 479 kB)
  73. [ 0.000000] Hierarchical RCU implementation.
  74. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  75. [ 0.000000] NR_IRQS:0 nr_irqs:0 0
  76. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  77. [ 0.000000] Total of 128 interrupts on 1 active controller
  78. [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
  79. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  80. [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
  81. [ 0.000000] Console: colour dummy device 80x30
  82. [ 0.000231] Calibrating delay loop... 993.47 BogoMIPS (lpj=969728)
  83. [ 0.029179] pid_max: default: 32768 minimum: 301
  84. [ 0.029323] Security Framework initialized
  85. [ 0.029383] Mount-cache hash table entries: 512
  86. [ 0.035603] Initializing cgroup subsys cpuacct
  87. [ 0.035625] Initializing cgroup subsys memory
  88. [ 0.035664] Initializing cgroup subsys blkio
  89. [ 0.035755] CPU: Testing write buffer coherency: ok
  90. [ 0.036140] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  91. [ 0.036195] Setting up static identity map for 0x804a6440 - 0x804a648c
  92. [ 0.037224] Brought up 1 CPUs
  93. [ 0.037238] SMP: Total of 1 processors activated (993.47 BogoMIPS).
  94. [ 0.038000] devtmpfs: initialized
  95. [ 0.096924] pinctrl core: initialized pinctrl subsystem
  96. [ 0.097074] rstctl core: initialized rstctl subsystem
  97. [ 0.097393] regulator-dummy: no parameters
  98. [ 0.097779] NET: Registered protocol family 16
  99. [ 0.098499] DMA: preallocated 256 KiB pool for atomic coherent allocations
  100. [ 0.104394] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  101. [ 0.105009] platform 49000000.edma: alias fck already exists
  102. [ 0.105029] platform 49000000.edma: alias fck already exists
  103. [ 0.105045] platform 49000000.edma: alias fck already exists
  104. [ 0.105825] OMAP GPIO hardware version 0.1
  105. [ 0.108483] gpio-rctrl rstctl.4: loaded OK
  106. [ 0.111963] hw-breakpoint: debug architecture 0x4 unsupported.
  107. [ 0.113296] cpsw.0: No hwaddr in dt. Using 90:59:af:54:8e:7f from efuse
  108. [ 0.113313] cpsw.1: No hwaddr in dt. Using 90:59:af:54:90:81 from efuse
  109. [ 0.123587] bio: create slab <bio-0> at 0
  110. [ 0.130298] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  111. [ 0.130599] vmmcsd_fixed: 3300 mV
  112. [ 0.132336] SCSI subsystem initialized
  113. [ 0.132600] usbcore: registered new interface driver usbfs
  114. [ 0.132666] usbcore: registered new interface driver hub
  115. [ 0.132904] usbcore: registered new device driver usb
  116. [ 0.134192] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  117. [ 0.135221] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
  118. [ 0.136904] DCDC1: at 1500 mV
  119. [ 0.137765] vdd_mpu: 925 <--> 1325 mV at 1325 mV
  120. [ 0.138605] vdd_core: 925 <--> 1150 mV at 1125 mV
  121. [ 0.139442] LDO1: at 1800 mV
  122. [ 0.140259] LDO2: at 3300 mV
  123. [ 0.141827] LDO3: 1800 mV
  124. [ 0.142670] LDO4: at 3300 mV
  125. [ 0.143413] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  126. [ 0.143875] omap_i2c 44e0b000.i2c: unable to select pin group
  127. [ 0.144357] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
  128. [ 0.145833] omap_i2c 4819c000.i2c: unable to select pin group
  129. [ 0.145981] media: Linux media interface: v0.10
  130. [ 0.146047] Linux video capture interface: v2.00
  131. [ 0.146131] pps_core: LinuxPPS API ver. 1 registered
  132. [ 0.146141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  133. [ 0.146637] Advanced Linux Sound Architecture Driver Initialized.
  134. [ 0.147595] cfg80211: Calling CRDA to update world regulatory domain
  135. [ 0.148400] NetLabel: Initializing
  136. [ 0.148410] NetLabel: domain hash size = 128
  137. [ 0.148418] NetLabel: protocols = UNLABELED CIPSOv4
  138. [ 0.148487] NetLabel: unlabeled traffic allowed by default
  139. [ 0.149121] Switching to clocksource gp_timer
  140. [ 0.194723] NET: Registered protocol family 2
  141. [ 0.195394] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  142. [ 0.195477] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
  143. [ 0.195567] TCP: Hash tables configured (established 4096 bind 4096)
  144. [ 0.195629] TCP: reno registered
  145. [ 0.195646] UDP hash table entries: 256 (order: 1, 12288 bytes)
  146. [ 0.195672] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  147. [ 0.195922] NET: Registered protocol family 1
  148. [ 0.196386] RPC: Registered named UNIX socket transport module.
  149. [ 0.196399] RPC: Registered udp transport module.
  150. [ 0.196407] RPC: Registered tcp transport module.
  151. [ 0.196415] RPC: Registered tcp NFSv4.1 backchannel transport module.
  152. [ 0.197102] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  153. [ 0.197378] CPU PMU: attempt to register multiple PMU devices!
  154. [ 0.197402] arm-pmu: probe of arm-pmu failed with error -28
  155. [ 0.197689] omap2_mbox_probe: platform not supported
  156. [ 0.383396] VFS: Disk quotas dquot_6.5.2
  157. [ 0.383625] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  158. [ 0.384374] NFS: Registering the id_resolver key type
  159. [ 0.384442] Key type id_resolver registered
  160. [ 0.384453] Key type id_legacy registered
  161. [ 0.384724] fuse init (API version 7.20)
  162. [ 0.385153] Btrfs loaded
  163. [ 0.385254] msgmni has been set to 992
  164. [ 0.387210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  165. [ 0.387227] io scheduler noop registered
  166. [ 0.387236] io scheduler deadline registered
  167. [ 0.387260] io scheduler cfq registered (default)
  168. [ 0.388532] tps65217-bl tps65217-bl: no platform data provided
  169. [ 0.388560] tps65217-bl: probe of tps65217-bl failed with error -22
  170. [ 0.389104] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  171. [ 0.390505] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  172. [ 0.390792] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
  173. [ 1.148081] console [ttyO0] enabled
  174. [ 1.152426] [drm] Initialized drm 1.1.0 20060810
  175. [ 1.165050] brd: module loaded
  176. [ 1.172245] loop: module loaded
  177. [ 1.175643] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  178. [ 1.182888] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  179. [ 1.190114] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  180. [ 1.197340] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  181. [ 1.204594] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  182. [ 1.218453] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5C,2613BBBK6095'
  183. [ 1.226216] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
  184. [ 1.264433] bone-capemgr bone_capemgr.9: slot #0: No cape found
  185. [ 1.301540] bone-capemgr bone_capemgr.9: slot #1: No cape found
  186. [ 1.338649] bone-capemgr bone_capemgr.9: slot #2: No cape found
  187. [ 1.368825] bone-capemgr bone_capemgr.9: slot #3: '4D 4.3 LCD CAPE- 4DCAPE-43T ,00A1,4D SYSTEMS ,BB-BONE-LCD4-01'
  188. [ 1.380462] bone-capemgr bone_capemgr.9: slot #4: specific override
  189. [ 1.387030] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
  190. [ 1.395037] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
  191. [ 1.405116] bone-capemgr bone_capemgr.9: slot #5: specific override
  192. [ 1.411684] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
  193. [ 1.419692] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
  194. [ 1.429667] bone-capemgr bone_capemgr.9: slot #6: specific override
  195. [ 1.436227] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
  196. [ 1.444240] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
  197. [ 1.454656] bone-capemgr bone_capemgr.9: loader: before slot-3 BB-BONE-LCD4-01:00A1 (prio 0)
  198. [ 1.463492] bone-capemgr bone_capemgr.9: loader: check slot-3 BB-BONE-LCD4-01:00A1 (prio 0)
  199. [ 1.472296] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  200. [ 1.481128] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  201. [ 1.489927] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  202. [ 1.498658] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  203. [ 1.507323] bone-capemgr bone_capemgr.9: initialized OK.
  204. [ 1.512897] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  205. [ 1.521712] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  206. [ 1.531715] OneNAND driver initializing
  207. [ 1.536696] usbcore: registered new interface driver rt2800usb
  208. [ 1.542836] bone-capemgr bone_capemgr.9: loader: after slot-3 BB-BONE-LCD4-01:00A1 (prio 0)
  209. [ 1.551574] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  210. [ 1.560375] usbcore: registered new interface driver cdc_ether
  211. [ 1.566495] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  212. [ 1.575146] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  213. [ 1.583936] usbcore: registered new interface driver rndis_host
  214. [ 1.590185] bone-capemgr bone_capemgr.9: slot #3: Requesting part number/version based 'BB-BONE-LCD4-01-00A1.dtbo
  215. [ 1.600994] usbcore: registered new interface driver cdc_ncm
  216. [ 1.606932] bone-capemgr bone_capemgr.9: slot #3: Requesting firmware 'BB-BONE-LCD4-01-00A1.dtbo' for board-name '4D 4.3 LCD CAPE- 4DCAPE-43T ', version '00A1'
  217. [ 1.622683] usbcore: registered new interface driver cdc_acm
  218. [ 1.628614] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  219. [ 1.637008] bone-capemgr bone_capemgr.9: slot #3: dtbo 'BB-BONE-LCD4-01-00A1.dtbo' loaded; converting to live tree
  220. [ 1.647925] usbcore: registered new interface driver cdc_wdm
  221. [ 1.653848] Initializing USB Mass Storage driver...
  222. [ 1.659451] bone-capemgr bone_capemgr.9: slot #3: #4 overlays
  223. [ 1.665585] usbcore: registered new interface driver usb-storage
  224. [ 1.671872] USB Mass Storage support registered.
  225. [ 1.677797] ehrpwm 48302200.ehrpwm: unable to select pin group
  226. [ 1.684071] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  227. [ 1.692371] pwm-backlight backlight.11: invalid default brightness level: 101, using 100
  228. [ 1.701107] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
  229. [ 1.706322] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  230. [ 1.716770] platform 4830e000.fb: alias fck already exists
  231. [ 1.722674] bone-capemgr bone_capemgr.9: slot #3: Applied #4 overlays.
  232. [ 1.729506] bone-capemgr bone_capemgr.9: loader: done slot-3 BB-BONE-LCD4-01:00A1 (prio 0)
  233. [ 1.738197] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  234. [ 1.746947] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  235. [ 1.755593] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  236. [ 1.764487] musb-hdrc musb-hdrc.0.auto: *** mode=3
  237. [ 1.769504] musb-hdrc musb-hdrc.0.auto: *** power=250
  238. [ 1.774805] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  239. [ 1.783461] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  240. [ 1.792648] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
  241. [ 1.797869] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  242. [ 1.806616] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
  243. [ 1.820910] musb-hdrc musb-hdrc.1.auto: *** mode=1
  244. [ 1.825956] musb-hdrc musb-hdrc.1.auto: *** power=250
  245. [ 1.831246] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  246. [ 1.837310] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
  247. [ 1.848551] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
  248. [ 1.862344] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  249. [ 1.870710] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  250. [ 1.877838] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  251. [ 1.885401] usb usb1: Product: MUSB HDRC host driver
  252. [ 1.890606] usb usb1: Manufacturer: Linux 3.8.13-bone41 musb-hcd
  253. [ 1.896884] usb usb1: SerialNumber: musb-hdrc.1.auto
  254. [ 1.902610] bone-capemgr bone_capemgr.9: slot #5: BB-BONELT-HDMI conflict P8.45 (#3:BB-BONE-LCD4-01)
  255. [ 1.912187] bone-capemgr bone_capemgr.9: slot #5: Failed verification
  256. [ 1.918931] bone-capemgr bone_capemgr.9: loader: failed to load slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  257. [ 1.928398] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  258. [ 1.937138] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
  259. [ 1.948637] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
  260. [ 1.955339] hub 1-0:1.0: USB hub found
  261. [ 1.959322] hub 1-0:1.0: 1 port detected
  262. [ 1.964097] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
  263. [ 1.970977] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  264. [ 1.980192] g_ffs: file system registered
  265. [ 1.984456] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  266. [ 1.993584] mousedev: PS/2 mouse device common for all mice
  267. [ 1.999474] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
  268. [ 2.015313] input: ti-tsc as /devices/ocp.3/44e0d000.tscadc/tsc/input/input1
  269. [ 2.023853] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  270. [ 2.031305] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
  271. [ 2.042849] i2c /dev entries driver
  272. [ 2.047711] pps_ldisc: PPS line discipline registered
  273. [ 2.053235] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#3:BB-BONE-LCD4-01)
  274. [ 2.062885] bone-capemgr bone_capemgr.9: slot #6: Failed verification
  275. [ 2.069631] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  276. [ 2.079301] Driver for 1-wire Dallas network protocol.
  277. [ 2.086316] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  278. [ 2.094014] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
  279. [ 2.102923] cpuidle: using governor ladder
  280. [ 2.107373] cpuidle: using governor menu
  281. [ 2.111840] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
  282. [ 2.119061] omap_hsmmc mmc.5: Failed to get rstctl; not using any
  283. [ 2.125826] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  284. [ 2.133024] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  285. [ 2.140299] mmc.5 supply vmmc_aux not found, using dummy regulator
  286. [ 2.147123] omap_hsmmc mmc.5: pins are not configured from the driver
  287. [ 2.180711] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
  288. [ 2.186858] omap_hsmmc mmc.15: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
  289. [ 2.194821] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
  290. [ 2.201167] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
  291. [ 2.208265] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
  292. [ 2.215664] mmc.15 supply vmmc_aux not found, using dummy regulator
  293. [ 2.222322] omap_hsmmc mmc.15: pins are not configured from the driver
  294. [ 2.257120] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
  295. [ 2.268784] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
  296. [ 2.276059] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
  297. [ 2.284994] leds-gpio gpio-leds.8: pins are not configured from the driver
  298. [ 2.293250] ledtrig-cpu: registered to indicate activity on CPUs
  299. [ 2.299890] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  300. [ 2.307096] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  301. [ 2.314682] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  302. [ 2.320911] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  303. [ 2.328053] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  304. [ 2.336925] mmc0: host does not support reading read-only switch. assuming write-enable.
  305. [ 2.346864] usbcore: registered new interface driver usbhid
  306. [ 2.352723] usbhid: USB HID core driver
  307. [ 2.356912] usbcore: registered new interface driver w35und
  308. [ 2.362923] mmc0: new high speed SDHC card at address b368
  309. [ 2.368742] usb 1-1: new high-speed USB device number 2 using musb-hdrc
  310. [ 2.376453] ashmem: initialized
  311. [ 2.380515] logger: created 256K log 'log_main'
  312. [ 2.385387] mmcblk0: mmc0:b368 7.45 GiB
  313. [ 2.390923] logger: created 256K log 'log_events'
  314. [ 2.396016] mmcblk0: p1 p2 p3 p4
  315. [ 2.399719] logger: created 256K log 'log_radio'
  316. [ 2.405921] logger: created 256K log 'log_system'
  317. [ 2.413620] TCP: cubic registered
  318. [ 2.417260] NET: Registered protocol family 10
  319. [ 2.422808] NET: Registered protocol family 17
  320. [ 2.427914] Key type dns_resolver registered
  321. [ 2.432764] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  322. [ 2.440894] ThumbEE CPU extension supported.
  323. [ 2.445450] Registering SWP/SWPB emulation handler
  324. [ 2.451172] registered taskstats version 1
  325. [ 2.456313] panel panel.14: panel: No power control GPIO
  326. [ 2.462922] tilcdc 4830e000.fb: No power control GPIO
  327. [ 2.468568] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  328. [ 2.475547] [drm] No driver support for vblank timestamp query.
  329. [ 2.491258] Console: switching to colour frame buffer device 120x45
  330. [ 2.499465] tilcdc 4830e000.fb: fb0: frame buffer device
  331. [ 2.505117] tilcdc 4830e000.fb: registered panic notifier
  332. [ 2.510925] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
  333. [ 2.548692] usb 1-1: New USB device found, idVendor=148f, idProduct=5370
  334. [ 2.555703] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  335. [ 2.563167] usb 1-1: Product: 802.11 n WLAN
  336. [ 2.567550] usb 1-1: Manufacturer: Ralink
  337. [ 2.571755] usb 1-1: SerialNumber: 1.0
  338. [ 2.575712] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  339. [ 2.582109] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  340. [ 2.589923] libphy: 4a101000.mdio: probed
  341. [ 2.594211] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  342. [ 2.604163] Detected MACID = 90:59:af:54:8e:7f
  343. [ 2.608784] cpsw 4a100000.ethernet: NAPI disabled
  344. [ 2.616171] input: gpio_keys.13 as /devices/ocp.3/gpio_keys.13/input/input2
  345. [ 2.624039] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  346. [ 2.638048] ALSA device list:
  347. [ 2.641197] No soundcards found.
  348. [ 2.707813] usb 1-1: reset high-speed USB device number 2 using musb-hdrc
  349. [ 2.871821] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  350. [ 2.880401] VFS: Mounted root (ext4 filesystem) on device 179:2.
  351. [ 2.887636] devtmpfs: mounted
  352. [ 2.891018] Freeing init memory: 236K
  353. [ 2.914014] init: could not import file '/init.usb.rc' from '/init.rc'
  354. [ 2.924042] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  355. [ 2.946733] mmc1: BKOPS_EN bit is not set
  356. [ 2.956493] mmc1: new high speed MMC card at address 0001
  357. [ 2.967708] mmcblk1: mmc1:0001 MMC02G 1.78 GiB
  358. [ 2.979425] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
  359. [ 2.991401] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
  360. [ 3.006864] mmcblk1: p1 p2
  361. [ 3.013701] mmcblk1boot1: unknown partition table
  362. [ 3.025968] mmcblk1boot0: unknown partition table
  363. [ 3.092462] init: cannot open '/initlogo.rle'
  364. [ 3.120998] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
  365. [ 3.664981] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  366. [ 3.725425] init: Failed to bind socket 'property_service': No such file or directory
  367. [ 3.734707] init: init startup failure
  368. [ 3.739357] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
  369. [ 3.739357]
  370. [ 3.748927] [<c001041d>] (unwind_backtrace+0x1/0x8c) from [<c049d229>] (panic+0x55/0x14c)
  371. [ 3.757463] [<c049d229>] (panic+0x55/0x14c) from [<c002f277>] (do_exit+0x30b/0x608)
  372. [ 3.765464] [<c002f277>] (do_exit+0x30b/0x608) from [<c002f5dd>] (do_group_exit+0x4d/0x70)
  373. [ 3.774076] [<c002f5dd>] (do_group_exit+0x4d/0x70) from [<c002f60d>] (__wake_up_parent+0x1/0x10)
  374. [ 3.783255] drm_kms_helper: panic occurred, switching back to text console
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!