API tools faq
paste
Advertisement
Guest User

rb951g 2hnd

a guest
Mar 10th, 2015
635
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.32 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:/tmp# dmesg
  2. [ 0.000000] Linux version 3.10.36 (tt@myhost) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04r40867) ) #1 Mon Mar 9 17:04:41 CET 2015
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
  5. [ 0.000000] SoC: Atheros AR9344 rev 2
  6. [ 0.000000] Clocks: CPU:600.000MHz, DDR:450.000MHz, AHB:200.000MHz, Ref:25.000MHz
  7. [ 0.000000] Determined physical RAM map:
  8. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  9. [ 0.000000] User-defined physical RAM map:
  10. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  11. [ 0.000000] Initrd not found or empty - disabling initrd
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
  17. [ 0.000000] On node 0 totalpages: 32768
  18. [ 0.000000] free_area_init_node: node 0, pgdat 802fc9b0, node_mem_map 81000000
  19. [ 0.000000] Normal zone: 256 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  22. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  23. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  24. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  25. [ 0.000000] pcpu-alloc: [0] 0
  26. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  27. [ 0.000000] Kernel command line: GPIO_RESET=yes no-uart boot_part_size=4194304 gpio=216619 HZ=30
  28. 0000000 mem=128M kmac=D4:CA:6D:AA:E8:28 board=951G boot=0 mlc=3 console=ttyS0,115200 rootfstype=yaffs noinitrd
  29. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  30. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  31. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  32. [ 0.000000] Writing ErrCtl register=00000000
  33. [ 0.000000] Readback ErrCtl register=00000000
  34. [ 0.000000] Memory: 126320k/131072k available (2175k kernel code, 4752k reserved, 609k data, 220k init, 0k highmem)
  35. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  36. [ 0.000000] NR_IRQS:51
  37. [ 0.070000] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
  38. [ 0.070000] pid_max: default: 32768 minimum: 301
  39. [ 0.070000] Mount-cache hash table entries: 512
  40. [ 0.080000] NET: Registered protocol family 16
  41. [ 0.090000] MIPS: machine is MikroTik RouterBOARD 951G-2HnD
  42. [ 0.310000] bio: create slab <bio-0> at 0
  43. [ 0.320000] Switching to clocksource MIPS
  44. [ 0.320000] NET: Registered protocol family 2
  45. [ 0.330000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  46. [ 0.330000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  47. [ 0.340000] TCP: Hash tables configured (established 1024 bind 1024)
  48. [ 0.340000] TCP: reno registered
  49. [ 0.350000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  50. [ 0.350000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  51. [ 0.360000] NET: Registered protocol family 1
  52. [ 0.360000] PCI: CLS 0 bytes, default 32
  53. [ 0.380000] yaffs: yaffs built Mar 9 2015 17:03:28 Installing.
  54. [ 0.380000] msgmni has been set to 246
  55. [ 0.380000] io scheduler noop registered
  56. [ 0.380000] io scheduler deadline registered (default)
  57. [ 0.390000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  58. [ 0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  59. [ 0.420000] console [ttyS0] enabled, bootconsole disabled
  60. [ 0.440000] NAND device: Manufacturer ID: 0x98, Chip ID: 0xf1 (Toshiba NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
  61. [ 0.450000] Scanning device for bad blocks
  62. [ 0.550000] Creating 3 MTD partitions on "ar934x-nfc":
  63. [ 0.560000] 0x000000000000-0x000000040000 : "booter"
  64. [ 0.560000] 0x000000040000-0x000000400000 : "kernel"
  65. [ 0.570000] 0x000000400000-0x000008000000 : "rootfs"
  66. [ 0.580000] mtd: device 2 (rootfs) set to be root filesystem
  67. [ 0.580000] mtdsplit: no squashfs found in "rootfs"
  68. [ 0.590000] mtdsplit: no squashfs found in "ar934x-nfc"
  69. [ 0.630000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
  70. [ 1.880000] libphy: ag71xx_mdio: probed
  71. [ 2.440000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
  72. [ 2.450000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
  73. [ 2.460000] TCP: cubic registered
  74. [ 2.460000] NET: Registered protocol family 17
  75. [ 2.460000] 8021q: 802.1Q VLAN Support v1.8
  76. [ 2.470000] yaffs: dev is 32505858 name is "mtdblock2" ro
  77. [ 2.480000] yaffs: passed flags ""
  78. [ 2.480000] yaffs: yaffs: Attempting MTD mount of 31.2,"mtdblock2"
  79. [ 2.480000] yaffs: auto selecting yaffs2
  80. [ 2.630000] yaffs: yaffs_read_super: is_checkpointed 0
  81. [ 2.630000] VFS: Mounted root (yaffs filesystem) readonly on device 31:2.
  82. [ 2.640000] Freeing unused kernel memory: 220K (80319000 - 80350000)
  83. [ 3.830000] usbcore: registered new interface driver usbfs
  84. [ 3.830000] usbcore: registered new interface driver hub
  85. [ 3.850000] usbcore: registered new device driver usb
  86. [ 3.880000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  87. [ 3.890000] ehci-platform: EHCI generic platform driver
  88. [ 3.890000] ehci-platform ehci-platform: EHCI Host Controller
  89. [ 3.900000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  90. [ 3.910000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  91. [ 3.940000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  92. [ 3.940000] hub 1-0:1.0: USB hub found
  93. [ 3.950000] hub 1-0:1.0: 1 port detected
  94. [ 3.960000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  95. [ 5.440000] eth0: link up (1000Mbps/Full duplex)
  96. [ 7.000000] eth0: link down
  97. [ 8.170000] NET: Registered protocol family 10
  98. [ 8.190000] nf_conntrack version 0.5.0 (1977 buckets, 7908 max)
  99. [ 8.200000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  100. [ 8.230000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
  101. [ 8.240000] Backport generated by backports.git backports-20140320-37-g5c33da0
  102. [ 8.250000] ip_tables: (C) 2000-2006 Netfilter Core Team
  103. [ 8.290000] xt_time: kernel timezone is -0000
  104. [ 8.320000] cfg80211: Calling CRDA to update world regulatory domain
  105. [ 8.330000] cfg80211: World regulatory domain updated:
  106. [ 8.330000] cfg80211: DFS Master region: unset
  107. [ 8.340000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  108. [ 8.350000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  109. [ 8.360000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  110. [ 8.370000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  111. [ 8.370000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  112. [ 8.380000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  113. [ 8.390000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  114. [ 8.510000] PPP generic driver version 2.4.2
  115. [ 8.510000] NET: Registered protocol family 24
  116. [ 8.590000] ath: EEPROM regdomain: 0x0
  117. [ 8.590000] ath: EEPROM indicates default country code should be used
  118. [ 8.590000] ath: doing EEPROM country->regdmn map search
  119. [ 8.590000] ath: country maps to regdmn code: 0x3a
  120. [ 8.590000] ath: Country alpha2 being used: US
  121. [ 8.590000] ath: Regpair used: 0x3a
  122. [ 8.600000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  123. [ 8.610000] cfg80211: Calling CRDA for country: US
  124. [ 8.610000] cfg80211: Regulatory domain changed to country: US
  125. [ 8.620000] cfg80211: DFS Master region: FCC
  126. [ 8.620000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  127. [ 8.630000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  128. [ 8.640000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
  129. [ 8.650000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
  130. [ 8.660000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  131. [ 8.670000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  132. [ 8.680000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
  133. [ 15.240000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  134. [ 15.240000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  135. [ 15.260000] device eth0.1 entered promiscuous mode
  136. [ 15.260000] device eth0 entered promiscuous mode
  137. [ 15.290000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  138. [ 15.330000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
  139. [ 16.450000] eth0: link up (1000Mbps/Full duplex)
  140. [ 16.480000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  141. [ 16.480000] br-lan: port 1(eth0.1) entered forwarding state
  142. [ 16.490000] br-lan: port 1(eth0.1) entered forwarding state
  143. [ 16.500000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  144. [ 16.500000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
  145. [ 16.540000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  146. [ 18.490000] br-lan: port 1(eth0.1) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!