API tools faq
paste
DarrenS

SDK 1.7

DarrenS
Mar 6th, 2015
61
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.55 KB | None | 0 0
raw download clone embed print report
  1. bootm 1000000 - 1c00000
  2. WARNING: adjusting available memory to 30000000
  3. ## Booting kernel from Legacy Image at 01000000 ...
  4. Image Name: Linux-3.12.19-rt30_daz_Cyrus_02
  5. Created: 2015-02-26 21:40:43 UTC
  6. Image Type: PowerPC Linux Kernel Image (gzip compressed)
  7. Data Size: 7382301 Bytes = 7 MiB
  8. Load Address: 00000000
  9. Entry Point: 00000000
  10. Verifying Checksum ... OK
  11. ## Flattened Device Tree blob at 01c00000
  12. Booting using the fdt blob at 0x1c00000
  13. Uncompressing Kernel Image ... OK
  14. Loading Device Tree to 03fe5000, end 03fff577 ... OK
  15. Using Cyrus machine description
  16. MMU: Supported page sizes
  17. 4 KB as direct
  18. 1024 KB as direct
  19. 2048 KB as direct
  20. 4096 KB as direct
  21. 16384 KB as direct
  22. 65536 KB as direct
  23. 262144 KB as direct
  24. 1048576 KB as direct
  25. MMU: Book3E HW tablewalk not supported
  26. No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000)
  27. No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000)
  28. Qman ver:0a01,01,02,00
  29. No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000)
  30. Bman ver:0a02,01,00
  31. pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-pdsr', using memblock_alloc(0x0000000001000000)
  32. pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-sre', using memblock_alloc(0x0000000000a00000)
  33. No USDPAA memory, no 'usdpaa_mem' bootarg
  34. CPU maps initialized for 1 thread per core
  35. Starting Linux PPC64 #11 SMP Thu Feb 26 21:39:36 UTC 2015
  36. -----------------------------------------------------
  37. ppc64_pft_size = 0x0
  38. physicalMemorySize = 0x200000000
  39. ppc64_caches.dcache_line_size = 0x40
  40. ppc64_caches.icache_line_size = 0x40
  41. -----------------------------------------------------
  42. Linux version 3.12.19-rt30_daz_Cyrus_02 (cyrus@cyrus) (gcc version 4.6.3 (Debian 4.6.3-14) ) #11 SMP Thu Feb 26 21:39:36 UTC 2015
  43. [boot]0012 Setup Arch
  44. Cyrus board from Varisys
  45. Zone ranges:
  46. DMA [mem 0x00000000-0x7fffffff]
  47. Normal [mem 0x80000000-0x1ffffffff]
  48. Movable zone start for each node
  49. Early memory node ranges
  50. node 0: [mem 0x00000000-0x1ffffffff]
  51. MMU: Allocated 2112 bytes of context maps for 255 contexts
  52. [boot]0015 Setup Done
  53. PERCPU: Embedded 11 pages/cpu @c00000000b100000 s15808 r0 d29248 u524288
  54. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2068480
  55. Kernel command line: root=/dev/sda6 console=ttyS0,115200
  56. PID hash table entries: 4096 (order: 3, 32768 bytes)
  57. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  58. Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  59. Sorting __ex_table...
  60. Memory: 8096512K/8388608K available (10904K kernel code, 1488K rwdata, 4928K rodata, 392K init, 903K bss, 292096K reserved)
  61. Hierarchical RCU implementation.
  62. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  63. NR_IRQS:512 nr_irqs:512 16
  64. mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 2 CPUs
  65. mpic: ISU size: 512, shift: 9, mask: 1ff
  66. mpic: Initializing for 512 sources
  67. clocksource: timebase mult[2819aa06] shift[24] registered
  68. Console: colour dummy device 80x25
  69. pid_max: default: 32768 minimum: 301
  70. Mount-cache hash table entries: 256
  71. mpic: requesting IPIs...
  72. e500 family performance monitor hardware support registered
  73. Brought up 2 CPUs
  74. devtmpfs: initialized
  75. xor: measuring software checksum speed
  76. 8regs : 4103.000 MB/sec
  77. 8regs_prefetch: 3611.000 MB/sec
  78. 32regs : 4223.000 MB/sec
  79. 32regs_prefetch: 3791.000 MB/sec
  80. xor: using function: 32regs (4223.000 MB/sec)
  81. NET: Registered protocol family 16
  82. software IO TLB [mem 0x0bd8b000-0x0fd8b000] (64MB) mapped at [c00000000bd8b000-c00000000fd8afff]
  83. PCI: Probing PCI hardware
  84. bio: create slab <bio-0> at 0
  85. raid6: int64x1 750 MB/s
  86. raid6: int64x2 1222 MB/s
  87. raid6: int64x4 1693 MB/s
  88. raid6: int64x8 1443 MB/s
  89. raid6: using algorithm int64x4 (1693 MB/s)
  90. raid6: using intx1 recovery algorithm
  91. vgaarb: loaded
  92. SCSI subsystem initialized
  93. usbcore: registered new interface driver usbfs
  94. usbcore: registered new interface driver hub
  95. usbcore: registered new device driver usb
  96. EDAC MC: Ver: 3.0.0
  97. Bman err interrupt handler present
  98. Bman portal initialised, cpu 0
  99. Bman portal initialised, cpu 1
  100. Bman portals initialised
  101. Qman err interrupt handler present
  102. QMan: Allocated lookup table at 8000000000000000, entry count 65537
  103. Qman portal initialised, cpu 0
  104. Qman portal initialised, cpu 1
  105. Qman portals initialised
  106. Bman: BPID allocator includes range 32:32
  107. Qman: FQID allocator includes range 256:256
  108. Qman: FQID allocator includes range 32768:32768
  109. Qman: CGRID allocator includes range 0:256
  110. Qman: pool channel allocator includes range 33:15
  111. Advanced Linux Sound Architecture Driver Initialized.
  112. Switched to clocksource timebase
  113. NET: Registered protocol family 2
  114. TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
  115. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  116. TCP: Hash tables configured (established 65536 bind 65536)
  117. TCP: reno registered
  118. UDP hash table entries: 4096 (order: 5, 131072 bytes)
  119. UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  120. NET: Registered protocol family 1
  121. RPC: Registered named UNIX socket transport module.
  122. RPC: Registered udp transport module.
  123. RPC: Registered tcp transport module.
  124. RPC: Registered tcp NFSv4.1 backchannel transport module.
  125. Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1
  126. PCI host bridge /pcie@ffe200000 (primary) ranges:
  127. MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000
  128. IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
  129. /pcie@ffe200000: PCICSRBAR @ 0xdf000000
  130. /pcie@ffe200000: Setup 64-bit PCI DMA window
  131. /pcie@ffe200000: DMA window size is 0xdf000000
  132. Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->8
  133. PCI host bridge /pcie@ffe201000 ranges:
  134. MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000
  135. IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
  136. /pcie@ffe201000: PCICSRBAR @ 0xdf000000
  137. /pcie@ffe201000: Setup 64-bit PCI DMA window
  138. /pcie@ffe201000: DMA window size is 0xdf000000
  139. HugeTLB registered 1 MB page size, pre-allocated 0 pages
  140. HugeTLB registered 4 MB page size, pre-allocated 0 pages
  141. HugeTLB registered 16 MB page size, pre-allocated 0 pages
  142. HugeTLB registered 64 MB page size, pre-allocated 0 pages
  143. HugeTLB registered 256 MB page size, pre-allocated 0 pages
  144. HugeTLB registered 1 GB page size, pre-allocated 0 pages
  145. NFS: Registering the id_resolver key type
  146. Key type id_resolver registered
  147. Key type id_legacy registered
  148. NTFS driver 2.1.30 [Flags: R/O].
  149. msgmni has been set to 15813
  150. async_tx: api initialized (async)
  151. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  152. io scheduler noop registered
  153. io scheduler deadline registered
  154. io scheduler cfq registered (default)
  155. fsl-raideng ffe320000.raideng: Freescale RAID Engine driver
  156. fsl-raideng ffe320000.raideng: Ver = 10100
  157. fsl-raideng ffe320000.raideng: RE mode is 80000000
  158. fsl-raideng ffe320000.raideng: Galois Field Polynomial is 1d000000
  159. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  160. serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 24937500) is a 16550A
  161. console [ttyS0] enabled
  162. serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 24937500) is a 16550A
  163. serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 24937500) is a 16550A
  164. serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 24937500) is a 16550A
  165. ePAPR hypervisor byte channel driver
  166. Linux agpgart interface v0.103
  167. [drm] Initialized drm 1.1.0 20060810
  168. [drm] radeon kernel modesetting enabled.
  169. brd: module loaded
  170. loop: module loaded
  171. Adaptec aacraid driver 1.2-0[30200]-ms
  172. st: Version 20101219, fixed bufsize 32768, s/g segs 256
  173. fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
  174. scsi0 : sata_fsl
  175. ata1: SATA max UDMA/133 irq 68
  176. fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
  177. scsi1 : sata_fsl
  178. ata2: SATA max UDMA/133 irq 69
  179. fsl_espi ffe110000.spi: master is unqueued, this is deprecated
  180. ata1: Signature Update detected @ 0 msecs
  181. fsl_espi ffe110000.spi: at 0x80000800800f2000 (irq = 53)
  182. libphy: Fixed MDIO Bus: probed
  183. libphy: Freescale PowerQUICC MII Bus: probed
  184. libphy: Freescale XGMAC MDIO Bus: probed
  185. Freescale FM module (Feb 7 2015:18:11:42), FMD API version 21.1.0
  186. Freescale FM Ports module (Feb 7 2015:18:11:44)
  187. dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
  188. dpaa_generic_debugfs: FSL DPAA Ethernet debugfs entries ()
  189. fsl_mac: fsl_mac: FSL FMan MAC API based driver ()
  190. fsl_mac ffe4e6000.ethernet: FMan dTSEC version: 0x08240101
  191. fsl_mac ffe4e6000.ethernet: FMan MAC address: 00:50:c2:20:da:bf
  192. fsl_mac ffe4e8000.ethernet: FMan dTSEC version: 0x08240101
  193. fsl_mac ffe4e8000.ethernet: FMan MAC address: 00:50:c2:20:da:c0
  194. fsl_mac ffe4e0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e0000) failed
  195. fsl_mac: probe of ffe4e0000.ethernet failed with error -22
  196. fsl_dpa: FSL DPAA Ethernet driver ()
  197. fsl_dpa: fsl_dpa: Probed interface eth0
  198. fsl_dpa: fsl_dpa: Probed interface eth1
  199. fsl_dpa_shared: FSL DPAA Shared Ethernet driver ()
  200. fsl_dpa_proxy: FSL DPAA Proxy initialization driver ()
  201. fsl_oh: FSL FMan Offline Parsing port driver ()
  202. fsl-of-srio ffe0c0000.rapidio: Rapidio UIO driver initialized
  203. fsl-of-dma ffe100300.dma: dma channel dma-uio0-0 initialized
  204. fsl-of-dma ffe100300.dma: dma channel dma-uio0-1 initialized
  205. fsl-of-dma ffe100300.dma: dma channel dma-uio0-2 initialized
  206. fsl-of-dma ffe100300.dma: dma channel dma-uio0-3 initialized
  207. fsl-of-dma ffe101300.dma: dma channel dma-uio1-0 initialized
  208. fsl-of-dma ffe101300.dma: dma channel dma-uio1-1 initialized
  209. fsl-of-dma ffe101300.dma: dma channel dma-uio1-2 initialized
  210. fsl-of-dma ffe101300.dma: dma channel dma-uio1-3 initialized
  211. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  212. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  213. ata1.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133
  214. ehci-pci: EHCI PCI platform driver
  215. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  216. ohci-pci: OHCI PCI platform driver
  217. fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  218. ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 16/32)
  219. fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  220. fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
  221. ata1.00: configured for UDMA/133
  222. scsi 0:0:0:0: Direct-Access ATA WDC WD10EZRX-00L 01.0 PQ: 0 ANSI: 5
  223. fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  224. sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  225. hub 1-0:1.0: USB hub found
  226. hub 1-0:1.0: 1 port detected
  227. fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  228. fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  229. fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
  230. fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  231. hub 2-0:1.0: USB hub found
  232. hub 2-0:1.0: 1 port detected
  233. usbcore: registered new interface driver usb-storage
  234. usbcore: registered new interface driver usbserial
  235. usbcore: registered new interface driver cp210x
  236. usbserial: USB Serial support registered for cp210x
  237. mousedev: PS/2 mouse device common for all mice
  238. i2c /dev entries driver
  239. mpc-i2c ffe118100.i2c: timeout 1000000 us
  240. mpc-i2c ffe119100.i2c: timeout 1000000 us
  241. sd 0:0:0:0: [sda] 4096-byte physical blocks
  242. sd 0:0:0:0: Attached scsi generic sg0 type 0
  243. sd 0:0:0:0: [sda] Write Protect is off
  244. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  245. rtc-ds1307 1-006f: rtc core: registered mcp7941x as rtc0
  246. rtc-ds1307 1-006f: 64 bytes nvram
  247. mpc-i2c ffe118000.i2c: timeout 1000000 us
  248. mpc-i2c ffe119000.i2c: timeout 1000000 us
  249. md: raid6 personality registered for level 6
  250. md: raid5 personality registered for level 5
  251. md: raid4 personality registered for level 4
  252. sdhci: Secure Digital Host Controller Interface driver
  253. sdhci: Copyright(c) Pierre Ossman
  254. sdhci-pltfm: SDHCI platform and OF driver helper
  255. /soc@ffe000000/sdhc@114000: voltage-ranges unspecified
  256. mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
  257. usbcore: registered new interface driver usbhid
  258. usbhid: USB HID core driver
  259. Freescale USDPAA process driver
  260. fsl-usdpaa: no region found
  261. Freescale USDPAA process IRQ driver
  262. fsl-pme ffe316000.pme: ver: 0x00100201
  263. Freescale pme2 db driver
  264. Freescale pme2 scan driver
  265. fsl-pme2-scan: device pme_scan registered
  266. fsl-of-rman ffe1e0000.rman: Of-device /soc@ffe000000/rman@1e0000 initialized
  267. fsl-of-rman ffe1e0000.rman: RMan inbound block0 initialized.
  268. fsl-of-rman ffe1e0000.rman: RMan inbound block1 initialized.
  269. fsl-of-rman ffe1e0000.rman: RMan inbound block2 initialized.
  270. fsl-of-rman ffe1e0000.rman: RMan inbound block3 initialized.
  271. Freescale hypervisor management driver
  272. fsl-hv: no hypervisor found
  273. usbcore: registered new interface driver snd-usb-audio
  274. mmc0: new high speed SD card at address 0002
  275. ipip: IPv4 over IPv4 tunneling driver
  276. mmcblk0: mmc0:0002 00000 1.90 GiB
  277. TCP: cubic registered
  278. Initializing XFRM netlink socket
  279. NET: Registered protocol family 10
  280. sit: IPv6 over IPv4 tunneling driver
  281. mmcblk0: unknown partition table
  282. ata2: Signature Update detected @ 504 msecs
  283. NET: Registered protocol family 17
  284. NET: Registered protocol family 15
  285. Key type dns_resolver registered
  286. fsl_dpa_macless: FSL DPAA MACless Ethernet driver ()
  287. fsl_dpa_generic: FSL DPAA Generic Ethernet driver ()
  288. rtc-ds1307 1-006f: setting system clock to 2015-02-26 21:52:15 UTC (1424987535)
  289. usb 1-1: new high-speed USB device number 2 using fsl-ehci
  290. ALSA device list:
  291. #0: Loopback 1
  292. hub 1-1:1.0: USB hub found
  293. hub 1-1:1.0: 4 ports detected
  294. ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  295. ata2.00: ATAPI: ATAPI iHBS312 2, PL16, max UDMA/100
  296. ata2.00: configured for UDMA/100
  297. scsi 1:0:0:0: CD-ROM ATAPI iHBS312 2 PL16 PQ: 0 ANSI: 5
  298. sr0: scsi3-mmc drive: 16x/40x writer dvd-ram cd/rw xa/form2 cdda tray
  299. cdrom: Uniform CD-ROM driver Revision: 3.20
  300. sr 1:0:0:0: Attached scsi generic sg1 type 5
  301. usb 2-1: new high-speed USB device number 2 using fsl-ehci
  302. sda: RDSK (512) sda1 (DOS^G)(res 2 spb 2) sda2 (DOS^G)(res 2 spb 2) sda3 (DOS^G)(res 2 spb 2) sda4 (DOS^G)(res 2 spb 4) sda5 (JXF^D)(res 2 spb 1) sda6 (EXT^C)(res 2 spb 2) sda7 (EXT^C)(res 2 spb 2) sda8 ((res 2 spb 2) sda9 (SWP^@)(res 2 spb 2)
  303. sd 0:0:0:0: [sda] Attached SCSI disk
  304. md: Waiting for all devices to be available before autodetect
  305. md: If you don't use raid, use raid=noautodetect
  306. md: Autodetecting RAID arrays.
  307. md: Scanned 0 and added 0 devices.
  308. md: autorun ...
  309. md: ... autorun DONE.
  310. hub 2-1:1.0: USB hub found
  311. hub 2-1:1.0: 4 ports detected
  312. kjournald starting. Commit interval 5 seconds
  313. EXT3-fs (sda6): mounted filesystem with ordered data mode
  314. VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
  315. devtmpfs: mounted
  316. Freeing unused kernel memory: 392K (c000000000f7f000 - c000000000fe1000)
  317. usb 1-1.1: new high-speed USB device number 3 using fsl-ehci
  318. usb-storage 1-1.1:1.0: USB Mass Storage device detected
  319. scsi2 : usb-storage 1-1.1:1.0
  320. usb 1-1.2: new high-speed USB device number 4 using fsl-ehci
  321. INIT: version 2.88 booting
  322. usb-storage 1-1.2:1.0: USB Mass Storage device detected
  323. scsi3 : usb-storage 1-1.2:1.0
  324. usb 1-1.3: new low-speed USB device number 5 using fsl-ehci
  325. input: CHESEN USB Keyboard as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
  326. hid-generic 0003:0A81:0101.0001: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-fsl-ehci.0-1.3/input0
  327. input: CHESEN USB Keyboard as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input1
  328. hid-generic 0003:0A81:0101.0002: input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-fsl-ehci.0-1.3/input1
  329. [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S.
  330. usb 1-1.4: new full-speed USB device number 6 using fsl-ehci
  331. findfs: unable to resolve 'UUID=1f39acd1-63a2-4b2e-bf7b-eb3f335cccc6'
  332. input: USB USB Mouse as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
  333. hid-generic 0003:1D57:3109.0003: input: USB HID v1.11 Mouse [USB USB Mouse] on usb-fsl-ehci.0-1.4/input0
  334. input: USB USB Mouse as /devices/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input3
  335. hid-generic 0003:1D57:3109.0004: input: USB HID v1.11 Keyboard [USB USB Mouse] on usb-fsl-ehci.0-1.4/input1
  336. usb 2-1.2: new high-speed USB device number 3 using fsl-ehci
  337. [....] Starting the hotplug events dispatcher: udevdudevd[1678]: starting version 175
  338. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  339. hub 2-1.2:1.0: USB hub found
  340. hub 2-1.2:1.0: 2 ports detected
  341. [....] Synthesizing the initial hotplug events...[?25l[?1cusb 2-1.3: new high-speed USB device number 4 using fsl-ehci
  342. 7[1G[[32m ok [39;49m8[?25h[?0cdone.
  343. [....] Waiting for /dev to be fully populated...usb 2-1.4: new high-speed USB device number 5 using fsl-ehci
  344. hub 2-1.4:1.0: USB hub found
  345. hub 2-1.4:1.0: 4 ports detected
  346. scsi 3:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
  347. scsi 2:0:0:0: Direct-Access 1100 PQ: 0 ANSI: 4
  348. sd 2:0:0:0: Attached scsi generic sg2 type 0
  349. sd 3:0:0:0: Attached scsi generic sg3 type 0
  350. sd 2:0:0:0: [sdb] 31744000 512-byte logical blocks: (16.2 GB/15.1 GiB)
  351. sd 3:0:0:0: [sdc] 7593984 512-byte logical blocks: (3.88 GB/3.62 GiB)
  352. sd 3:0:0:0: [sdc] Write Protect is off
  353. sd 2:0:0:0: [sdb] Write Protect is off
  354. sd 2:0:0:0: [sdb] No Caching mode page found
  355. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  356. sd 3:0:0:0: [sdc] No Caching mode page found
  357. sd 3:0:0:0: [sdc] Assuming drive cache: write through
  358. sd 2:0:0:0: [sdb] No Caching mode page found
  359. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  360. sdb: sdb1
  361. sd 3:0:0:0: [sdc] No Caching mode page found
  362. sd 3:0:0:0: [sdc] Assuming drive cache: write through
  363. sdc: RDSK (512) sdc1 (DOS^G)(res 2 spb 4) sdc2 (DOS^G)(res 2 spb 4)
  364. sd 2:0:0:0: [sdb] No Caching mode page found
  365. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  366. sd 2:0:0:0: [sdb] Attached SCSI removable disk
  367. sd 3:0:0:0: [sdc] No Caching mode page found
  368. sd 3:0:0:0: [sdc] Assuming drive cache: write through
  369. sd 3:0:0:0: [sdc] Attached SCSI removable disk
  370. usb 2-1.3: new high-speed USB device number 6 using fsl-ehci
  371. usb-storage 2-1.3:1.0: USB Mass Storage device detected
  372. scsi4 : usb-storage 2-1.3:1.0
  373. hid-generic 0003:058F:6364.0005: device has no listeners, quitting
  374. scsi 4:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
  375. sd 4:0:0:0: Attached scsi generic sg4 type 0
  376. sd 4:0:0:0: [sdd] Attached SCSI removable disk
  377. scsi 4:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
  378. sd 4:0:0:1: Attached scsi generic sg5 type 0
  379. sd 4:0:0:1: [sde] Attached SCSI removable disk
  380. scsi 4:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
  381. sd 4:0:0:2: Attached scsi generic sg6 type 0
  382. scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
  383. sd 4:0:0:2: [sdf] Attached SCSI removable disk
  384. sd 4:0:0:3: Attached scsi generic sg7 type 0
  385. sd 4:0:0:3: [sdg] Attached SCSI removable disk
  386. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  387. [....] Setting parameters of disc: (none)[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  388. [....] Setting preliminary keymap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  389. findfs: unable to resolve 'UUID=1f39acd1-63a2-4b2e-bf7b-eb3f335cccc6'
  390. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  391. Usage: mountpoint [-q] [-d] [-x] path
  392. [....] Checking root file system...fsck from util-linux 2.20.1
  393. /run/rootdev: clean, 1256105/9183232 files, 15408033/36720000 blocks
  394. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  395. EXT3-fs (sda6): using internal journal
  396. [....] Cleaning up temporary files... /tmp /lib/init/rw[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  397. findfs: unable to resolve 'UUID=1f39acd1-63a2-4b2e-bf7b-eb3f335cccc6'
  398. findfs: unable to resolve 'UUID=1f39acd1-63a2-4b2e-bf7b-eb3f335cccc6'
  399. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  400. [....] Checking file systems...fsck from util-linux 2.20.1
  401. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  402. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  403. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  404. findfs: unable to resolve 'UUID=1f39acd1-63a2-4b2e-bf7b-eb3f335cccc6'
  405. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  406. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  407. [....] Configuring network interfaces...postconf: fatal: open /etc/postfix/main.cf: No such file or directory
  408. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  409. [....] Starting rpcbind daemon...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  410. [....] Starting NFS common utilities: statd idmapd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  411. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  412. [....] Setting up ALSA...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  413. [[36minfo[39;49m] Setting console screen modes.
  414. setterm: cannot (un)set powersave mode: Inappropriate ioctl for device
  415. [9;30][14;30][[36minfo[39;49m] Skipping font and keymap setup (handled by console-setup).
  416. [....] Setting up console font and keymap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
  417. [....] Setting sensors limitsNo sensors found!
  418. Make sure you loaded all the kernel drivers you need.
  419. Try sensors-detect to find out which these are.
  420. No sensors found!
  421. Make sure you loaded all the kernel drivers you need.
  422. Try sensors-detect to find out which these are.
  423. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  424. [....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  425. INIT: Entering runlevel: 2
  426. [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2.
  427. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  428. [....] Starting rpcbind daemon...[....] Already running.[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  429. [[36minfo[39;49m] Not starting internet superserver: no services enabled.
  430. [....] Starting NFS common utilities: statd idmapd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  431. [....] Enabling additional executable binary formats: binfmt-supportupdate-binfmts: warning: Couldn't load the binfmt_misc module.
  432. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  433. [....] Starting deferred execution scheduler: atd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  434. Starting Dropbear SSH server: dropbear.
  435. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  436. [....] Starting bluetooth: disabled. see /etc/default/bluetooth[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  437. [....] Starting K Display Manager: kdm[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  438. [[36minfo[39;49m] Not starting Light Display Manager; it is not the default display manager.
  439. [....] Starting Samba daemons: nmbd smbd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  440. [....] Starting network connection manager: NetworkManagersaned disabled; edit /etc/default/saned
  441. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  442. [....] PulseAudio configured for per-user sessions ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m
  443. [....] Starting the Winbind daemon: winbind[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
  444. modem-manager[4167]: <info> ModemManager (version 0.5.2.0) starting...
  445.  
  446. modem-manager[4167]: <info> Loaded plugin Sierra
  447.  
  448. modem-manager[4167]: <info> Loaded plugin Wavecom
  449.  
  450. modem-manager[4167]: <info> Loaded plugin Huawei
  451.  
  452. modem-manager[4167]: <info> Loaded plugin Linktop
  453.  
  454. modem-manager[4167]: <info> Loaded plugin Gobi
  455.  
  456. modem-manager[4167]: <info> Loaded plugin Novatel
  457.  
  458. modem-manager[4167]: <info> Loaded plugin Generic
  459.  
  460. modem-manager[4167]: <info> Loaded plugin Ericsson MBM
  461.  
  462. modem-manager[4167]: <info> Loaded plugin Nokia
  463.  
  464. modem-manager[4167]: <info> Loaded plugin Longcheer
  465.  
  466. modem-manager[4167]: <info> Loaded plugin SimTech
  467.  
  468. modem-manager[4167]: <info> Loaded plugin Samsung
  469.  
  470. modem-manager[4167]: <info> Loaded plugin Option
  471.  
  472. modem-manager[4167]: <info> Loaded plugin AnyData
  473.  
  474. modem-manager[4167]: <info> Loaded plugin Option High-Speed
  475.  
  476. modem-manager[4167]: <info> Loaded plugin MotoC
  477.  
  478. modem-manager[4167]: <info> Loaded plugin X22X
  479.  
  480. modem-manager[4167]: <info> Loaded plugin ZTE
  481.  
  482. /etc/rc.local: 15: /etc/rc.local: rfkill: not found
  483.  
  484. Debian GNU/Linux 7 cyrus ttyS0
  485.  
  486. cyrus login: cyrus
  487. Password:
  488. Last login: Thu Feb 26 21:34:07 UTC 2015 on :0
  489. Linux cyrus 3.12.19-rt30_daz_Cyrus_02 #11 SMP Thu Feb 26 21:39:36 UTC 2015 ppc64
  490.  
  491. The programs included with the Debian GNU/Linux system are free software;
  492. the exact distribution terms for each program are described in the
  493. individual files in /usr/share/doc/*/copyright.
  494.  
  495. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  496. permitted by applicable law.
  497. cyrus@cyrus:~$ lspci
  498. cyrus@cyrus:~$ lspci -vv
  499. cyrus@cyrus:~$
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!