API tools faq
paste
Advertisement
noggin

Dual DVB-T dmesg

noggin
Mar 6th, 2015
287
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.89 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0xf00
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.19.0.147 (devel@mld-nb4-rpi2) (gcc version 4.6.3 (Debian 4.6.3-14+rpi1) ) #1 SMP PREEMPT Sun Mar 1 05:32:46 CET 2015
  5. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] Machine: BCM2709
  8. [ 0.000000] cma: Reserved 8 MiB at 0x36800000
  9. [ 0.000000] Memory policy: Data cache writealloc
  10. [ 0.000000] On node 0 totalpages: 225280
  11. [ 0.000000] free_area_init_node: node 0, pgdat 80a42f40, node_mem_map b6036000
  12. [ 0.000000] Normal zone: 1980 pages used for memmap
  13. [ 0.000000] Normal zone: 0 pages reserved
  14. [ 0.000000] Normal zone: 225280 pages, LIFO batch:31
  15. [ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
  16. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  17. [ 0.000000] PERCPU: Embedded 11 pages/cpu @b6005000 s13184 r8192 d23680 u45056
  18. [ 0.000000] pcpu-alloc: s13184 r8192 d23680 u45056 alloc=11*4096
  19. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  20. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223300
  21. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa01041 bcm2709.serial=0x97cd20f3 smsc95xx.macaddr=B8:27:EB:CD:20:F3 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 root=/dev/mmcblk0p2 rootwait splash=silent quiet nodialog smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
  22. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Memory: 872672K/901120K available (7552K kernel code, 421K rwdata, 2076K rodata, 456K init, 780K bss, 20256K reserved, 8192K cma-reserved)
  26. [ 0.000000] Virtual kernel memory layout:
  27. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  29. [ 0.000000] vmalloc : 0xb7800000 - 0xff000000 (1144 MB)
  30. [ 0.000000] lowmem : 0x80000000 - 0xb7000000 ( 880 MB)
  31. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  32. [ 0.000000] .text : 0x80008000 - 0x8096f430 (9630 kB)
  33. [ 0.000000] .init : 0x80970000 - 0x809e2000 ( 456 kB)
  34. [ 0.000000] .data : 0x809e2000 - 0x80a4b73c ( 422 kB)
  35. [ 0.000000] .bss : 0x80a4b73c - 0x80b0eadc ( 781 kB)
  36. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  37. [ 0.000000] Preemptible hierarchical RCU implementation.
  38. [ 0.000000] NR_IRQS:480
  39. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
  40. [ 0.000012] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  41. [ 0.000034] Switching to timer-based delay loop, resolution 52ns
  42. [ 0.000319] Console: colour dummy device 80x30
  43. [ 0.000541] console [tty0] enabled
  44. [ 0.000572] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  45. [ 0.000597] pid_max: default: 32768 minimum: 301
  46. [ 0.001001] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  47. [ 0.001024] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  48. [ 0.002337] Initializing cgroup subsys memory
  49. [ 0.002389] Initializing cgroup subsys devices
  50. [ 0.002417] Initializing cgroup subsys freezer
  51. [ 0.002455] Initializing cgroup subsys net_cls
  52. [ 0.002477] Initializing cgroup subsys blkio
  53. [ 0.002563] CPU: Testing write buffer coherency: ok
  54. [ 0.002648] ftrace: allocating 23400 entries in 69 pages
  55. [ 0.062486] missing device node for CPU 0
  56. [ 0.062552] missing device node for CPU 1
  57. [ 0.062578] missing device node for CPU 2
  58. [ 0.062604] missing device node for CPU 3
  59. [ 0.062641] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  60. [ 0.062658] [bcm2709_smp_prepare_cpus] enter
  61. [ 0.062803] Setting up static identity map for 0x6dcb80 - 0x6dcbd8
  62. [ 0.122515] [bcm2709_boot_secondary] cpu:1 started (0) 16
  63. [ 0.122822] [bcm2709_secondary_init] enter cpu:1
  64. [ 0.122880] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  65. [ 0.142487] [bcm2709_boot_secondary] cpu:2 started (0) 18
  66. [ 0.142745] [bcm2709_secondary_init] enter cpu:2
  67. [ 0.142780] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  68. [ 0.162563] [bcm2709_boot_secondary] cpu:3 started (0) 17
  69. [ 0.162803] [bcm2709_secondary_init] enter cpu:3
  70. [ 0.162835] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  71. [ 0.162937] Brought up 4 CPUs
  72. [ 0.162964] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  73. [ 0.162975] CPU: All CPU(s) started in SVC mode.
  74. [ 0.164009] devtmpfs: initialized
  75. [ 0.182699] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  76. [ 0.184165] xor: measuring software checksum speed
  77. [ 0.282315] arm4regs : 829.200 MB/sec
  78. [ 0.382420] 8regs : 542.400 MB/sec
  79. [ 0.482525] 32regs : 511.200 MB/sec
  80. [ 0.582636] neon : 594.400 MB/sec
  81. [ 0.582651] xor: using function: arm4regs (829.200 MB/sec)
  82. [ 0.582697] pinctrl core: initialized pinctrl subsystem
  83. [ 0.583487] NET: Registered protocol family 16
  84. [ 0.589097] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  85. [ 0.612737] cpuidle: using governor ladder
  86. [ 0.642770] cpuidle: using governor menu
  87. [ 0.643139] bcm2709.uart_clock = 3000000
  88. [ 0.646788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  89. [ 0.646806] hw-breakpoint: maximum watchpoint size is 8 bytes.
  90. [ 0.646844] mailbox: Broadcom VideoCore Mailbox driver
  91. [ 0.646954] bcm2708_vcio: mailbox at f300b880
  92. [ 0.647379] bcm_power: Broadcom power driver
  93. [ 0.647398] bcm_power_open() -> 0
  94. [ 0.647410] bcm_power_request(0, 8)
  95. [ 1.148082] bcm_mailbox_read -> 00000080, 0
  96. [ 1.148096] bcm_power_request -> 0
  97. [ 1.148239] Serial: AMBA PL011 UART driver
  98. [ 1.148379] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
  99. [ 1.383637] raid6: int32x1 87 MB/s
  100. [ 1.553853] raid6: int32x2 103 MB/s
  101. [ 1.724413] raid6: int32x4 101 MB/s
  102. [ 1.894830] raid6: int32x8 79 MB/s
  103. [ 2.064632] raid6: neonx1 287 MB/s
  104. [ 2.234778] raid6: neonx2 384 MB/s
  105. [ 2.405018] raid6: neonx4 424 MB/s
  106. [ 2.575162] raid6: neonx8 266 MB/s
  107. [ 2.575175] raid6: using algorithm neonx4 (424 MB/s)
  108. [ 2.575187] raid6: using intx1 recovery algorithm
  109. [ 2.575795] SCSI subsystem initialized
  110. [ 2.576048] usbcore: registered new interface driver usbfs
  111. [ 2.576171] usbcore: registered new interface driver hub
  112. [ 2.576338] usbcore: registered new device driver usb
  113. [ 2.578246] Switched to clocksource arch_sys_counter
  114. [ 2.633079] FS-Cache: Loaded
  115. [ 2.633489] CacheFiles: Loaded
  116. [ 2.649543] NET: Registered protocol family 2
  117. [ 2.650963] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  118. [ 2.651090] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  119. [ 2.651284] TCP: Hash tables configured (established 8192 bind 8192)
  120. [ 2.651400] TCP: reno registered
  121. [ 2.651422] UDP hash table entries: 512 (order: 2, 16384 bytes)
  122. [ 2.651485] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  123. [ 2.651831] NET: Registered protocol family 1
  124. [ 2.652354] RPC: Registered named UNIX socket transport module.
  125. [ 2.652371] RPC: Registered udp transport module.
  126. [ 2.652382] RPC: Registered tcp transport module.
  127. [ 2.652393] RPC: Registered tcp NFSv4.1 backchannel transport module.
  128. [ 2.653355] bcm2708_dma: DMA manager at f3007000
  129. [ 2.653502] bcm2708_gpio: bcm2708_gpio_probe 80a071a8
  130. [ 2.654260] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  131. [ 2.656309] futex hash table entries: 1024 (order: 4, 65536 bytes)
  132. [ 2.656551] audit: initializing netlink subsys (disabled)
  133. [ 2.656618] audit: type=2000 audit(2.619:1): initialized
  134. [ 2.677275] FS-Cache: Netfs 'nfs' registered for caching
  135. [ 2.678354] NFS: Registering the id_resolver key type
  136. [ 2.678425] Key type id_resolver registered
  137. [ 2.678438] Key type id_legacy registered
  138. [ 2.678871] SGI XFS with security attributes, no debug enabled
  139. [ 2.684444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  140. [ 2.684640] io scheduler noop registered
  141. [ 2.684665] io scheduler deadline registered
  142. [ 2.684736] io scheduler cfq registered (default)
  143. [ 2.686453] BCM2708FB: allocated DMA memory f6c00000
  144. [ 2.686504] BCM2708FB: allocated DMA channel 0 @ f3007000
  145. [ 2.716747] Console: switching to colour frame buffer device 240x61
  146. [ 2.736524] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  147. [ 2.736883] uart-pl011 dev:f1: no DMA platform data
  148. [ 2.737477] vc-cma: Videocore CMA driver
  149. [ 2.737492] vc-cma: vc_cma_base = 0x00000000
  150. [ 2.737505] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  151. [ 2.737517] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  152. [ 2.751351] brd: module loaded
  153. [ 2.758349] loop: module loaded
  154. [ 2.758791] vchiq: vchiq_init_state: slot_zero = 0xb6800000, is_master = 0
  155. [ 2.759574] Loading iSCSI transport class v2.0-870.
  156. [ 2.760530] usbcore: registered new interface driver smsc95xx
  157. [ 2.760608] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  158. [ 2.960990] Core Release: 2.80a
  159. [ 2.961010] Setting default values for core params
  160. [ 2.961062] Finished setting default values for core params
  161. [ 3.161514] Using Buffer DMA mode
  162. [ 3.161532] Periodic Transfer Interrupt Enhancement - disabled
  163. [ 3.161543] Multiprocessor Interrupt Enhancement - disabled
  164. [ 3.161556] OTG VER PARAM: 0, OTG VER FLAG: 0
  165. [ 3.161573] Dedicated Tx FIFOs mode
  166. [ 3.161970] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb6c14000 dma = 0xf6c14000 len=9024
  167. [ 3.162010] FIQ FSM acceleration enabled for :
  168. [ 3.162010] Non-periodic Split Transactions
  169. [ 3.162010] Periodic Split Transactions
  170. [ 3.162010] High-Speed Isochronous Endpoints
  171. [ 3.162036] dwc_otg: Microframe scheduler enabled
  172. [ 3.162108] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80581ac0
  173. [ 3.162128] WARN::hcd_init_fiq:413: FIQ ASM at 0x80581e0c length 36
  174. [ 3.162148] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb7806000
  175. [ 3.162176] dwc_otg bcm2708_usb: DWC OTG Controller
  176. [ 3.162228] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  177. [ 3.162281] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  178. [ 3.162338] Init: Port Power? op_state=1
  179. [ 3.162349] Init: Power Port (0)
  180. [ 3.162679] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  181. [ 3.162700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  182. [ 3.162716] usb usb1: Product: DWC OTG Controller
  183. [ 3.162732] usb usb1: Manufacturer: Linux 3.19.0.147 dwc_otg_hcd
  184. [ 3.162748] usb usb1: SerialNumber: bcm2708_usb
  185. [ 3.163900] hub 1-0:1.0: USB hub found
  186. [ 3.163972] hub 1-0:1.0: 1 port detected
  187. [ 3.164720] dwc_otg: FIQ enabled
  188. [ 3.164734] dwc_otg: NAK holdoff enabled
  189. [ 3.164745] dwc_otg: FIQ split-transaction FSM enabled
  190. [ 3.164787] Module dwc_common_port init
  191. [ 3.165200] usbcore: registered new interface driver usb-storage
  192. [ 3.165514] mousedev: PS/2 mouse device common for all mice
  193. [ 3.166208] bcm2835-cpufreq: min=600000 max=900000
  194. [ 3.166511] Driver 'mmcblk' needs updating - please use bus_type methods
  195. [ 3.166589] sdhci: Secure Digital Host Controller Interface driver
  196. [ 3.166600] sdhci: Copyright(c) Pierre Ossman
  197. [ 3.166780] DMA channels allocated for the MMC driver
  198. [ 3.198421] Load BCM2835 MMC driver
  199. [ 3.198616] sdhci-pltfm: SDHCI platform and OF driver helper
  200. [ 3.199142] ledtrig-cpu: registered to indicate activity on CPUs
  201. [ 3.202491] hidraw: raw HID events driver (C) Jiri Kosina
  202. [ 3.204902] usbcore: registered new interface driver usbhid
  203. [ 3.204914] usbhid: USB HID core driver
  204. [ 3.207380] TCP: cubic registered
  205. [ 3.207408] Initializing XFRM netlink socket
  206. [ 3.207453] NET: Registered protocol family 17
  207. [ 3.207650] Key type dns_resolver registered
  208. [ 3.211282] Registering SWP/SWPB emulation handler
  209. [ 3.216979] registered taskstats version 1
  210. [ 3.220878] Btrfs loaded
  211. [ 3.221099] vc-sm: Videocore shared memory driver
  212. [ 3.221121] [vc_sm_connected_init]: start
  213. [ 3.221903] [vc_sm_connected_init]: end - returning 0
  214. [ 3.223012] Waiting for root device /dev/mmcblk0p2...
  215. [ 3.235524] mmc0: host does not support reading read-only switch, assuming write-enable
  216. [ 3.237555] mmc0: new high speed SDHC card at address 0001
  217. [ 3.238284] mmcblk0: mmc0:0001 00000 14.6 GiB
  218. [ 3.239782] mmcblk0: p1 p2
  219. [ 3.334703] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  220. [ 3.334727] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 1th superblock
  221. [ 3.335524] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  222. [ 3.335542] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 2th superblock
  223. [ 3.335713] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  224. [ 3.335727] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 1th superblock
  225. [ 3.335888] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  226. [ 3.335902] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 2th superblock
  227. [ 3.336924] BTRFS: device fsid 6b01cdfd-e40c-4e98-80f6-0a33132214fb devid 1 transid 52 /dev/root
  228. [ 3.339224] BTRFS info (device mmcblk0p2): disk space caching is enabled
  229. [ 3.354566] BTRFS: detected SSD devices, enabling SSD mode
  230. [ 3.358526] Indeed it is in host mode hprt0 = 00021501
  231. [ 3.368635] VFS: Mounted root (btrfs filesystem) on device 0:14.
  232. [ 3.370489] devtmpfs: mounted
  233. [ 3.371291] Freeing unused kernel memory: 456K (80970000 - 809e2000)
  234. [ 3.538554] usb 1-1: new high-speed USB device number 2 using dwc_otg
  235. [ 3.538718] Indeed it is in host mode hprt0 = 00001101
  236. [ 3.738777] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  237. [ 3.738820] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  238. [ 3.740095] hub 1-1:1.0: USB hub found
  239. [ 3.740234] hub 1-1:1.0: 5 ports detected
  240. [ 3.978002] BTRFS info (device mmcblk0p2): disk space caching is enabled
  241. [ 4.018563] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  242. [ 4.118797] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  243. [ 4.118829] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  244. [ 4.122270] smsc95xx v1.0.4
  245. [ 4.182589] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:cd:20:f3
  246. [ 4.258555] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
  247. [ 4.413136] usb 1-1.2: New USB device found, idVendor=04d9, idProduct=1203
  248. [ 4.413169] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  249. [ 4.442728] input: HID 04d9:1203 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:1203.0001/input/input0
  250. [ 4.498884] hid-generic 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-bcm2708_usb-1.2/input0
  251. [ 4.545584] input: HID 04d9:1203 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:1203.0002/input/input1
  252. [ 4.598811] hid-generic 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-bcm2708_usb-1.2/input1
  253. [ 4.678537] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
  254. [ 4.780208] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608
  255. [ 4.780243] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  256. [ 4.780260] usb 1-1.4: Product: USB2.0 Hub
  257. [ 4.781724] hub 1-1.4:1.0: USB hub found
  258. [ 4.782127] hub 1-1.4:1.0: 4 ports detected
  259. [ 5.058735] usb 1-1.4.2: new high-speed USB device number 6 using dwc_otg
  260. [ 5.159188] usb 1-1.4.2: New USB device found, idVendor=2040, idProduct=9580
  261. [ 5.159223] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  262. [ 5.159241] usb 1-1.4.2: Product: NovaT 500Stick
  263. [ 5.159257] usb 1-1.4.2: Manufacturer: Hauppauge
  264. [ 5.159274] usb 1-1.4.2: SerialNumber: 4030502773
  265. [ 5.238727] usb 1-1.4.3: new full-speed USB device number 7 using dwc_otg
  266. [ 5.349830] usb 1-1.4.3: New USB device found, idVendor=147a, idProduct=e03e
  267. [ 5.349862] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  268. [ 5.349880] usb 1-1.4.3: Product: eHome Infrared Transceiver
  269. [ 5.349896] usb 1-1.4.3: Manufacturer: Formosa21
  270. [ 5.349912] usb 1-1.4.3: SerialNumber: 0000ADA3
  271. [ 5.356853] hid-generic 0003:147A:E03E.0003: hiddev0,hidraw2: USB HID v1.00 Device [Formosa21 eHome Infrared Transceiver] on usb-bcm2708_usb-1.4.3/input1
  272. [ 5.865262] i2c_dev: disagrees about version of symbol module_layout
  273. [ 5.986417] uinput: disagrees about version of symbol module_layout
  274. [ 6.097707] i2c_dev: disagrees about version of symbol module_layout
  275. [ 6.188515] i2c_dev: disagrees about version of symbol module_layout
  276. [ 6.277044] i2c_dev: disagrees about version of symbol module_layout
  277. [ 6.914987] udevd[336]: starting version 175
  278. [ 7.077726] i2c_bcm2708: disagrees about version of symbol module_layout
  279. [ 7.104764] snd: disagrees about version of symbol module_layout
  280. [ 7.211674] rc_core: disagrees about version of symbol module_layout
  281. [ 7.263182] rc_core: disagrees about version of symbol module_layout
  282. [ 7.532046] random: nonblocking pool is initialized
  283. [ 7.624415] XFS (mmcblk0p1): unknown mount option [nls].
  284. [ 7.625527] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  285. [ 7.625550] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 1th superblock
  286. [ 7.626131] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x6020601)
  287. [ 7.626148] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 2th superblock
  288. [ 7.626171] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  289. [ 7.626185] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 1th superblock
  290. [ 7.626200] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x6020601)
  291. [ 7.626213] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 2th superblock
  292. [ 11.760992] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  293. [ 13.308795] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  294. [ 31.718214] snd: disagrees about version of symbol module_layout
  295. [ 31.738661] i2c_bcm2708: disagrees about version of symbol module_layout
  296. [ 31.922489] rc_core: disagrees about version of symbol module_layout
  297. [ 31.968125] rc_core: disagrees about version of symbol module_layout
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!