DDR Version 1.04 20130517
In
DDR3
300MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB
Memory OK
OUT
BUILD=====2
SdmmcInit=0 0
FwPartOffset=2000 , 0
run on sd0
OK! 32250
unsigned!
SecureBootEn = 0 0
Boot ver: 0000-00-00#0.00
start_linux=====44242
 1267466 Starting kernel...@0x60408000

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Linux version 3.18.0-rc5+ (aldo@deathstar) (gcc version 4.9.2 20140719 (prerelease) (SaberMod-4.9.2_arm-graphite) ) #10 SMP Tue Nov 25 23:02:43 CET 2014
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Radxa Rock
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
On node 0 totalpages: 520192
free_area_init_node: node 0, pgdat c08bd2c0, node_mem_map ee818000
  Normal zone: 1520 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 194560 pages, LIFO batch:31
  HighMem zone: 2544 pages used for memmap
  HighMem zone: 325632 pages, LIFO batch:31
PERCPU: Embedded 9 pages/cpu @ee7da000 s7872 r8192 d20800 u36864
pcpu-alloc: s7872 r8192 d20800 u36864 alloc=9*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 518672
Kernel command line: console=tty0 console=ttyS2,115200 debug earlyprintk root=/dev/mmcblk0p1 rootwait rootfstype=ext4 rw splash
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2054084K/2080768K available (6327K kernel code, 386K rwdata, 1948K rodata, 316K init, 351K bss, 26684K reserved, 1302528K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc081cf54   (8276 kB)
      .init : 0xc081d000 - 0xc086c000   ( 316 kB)
      .data : 0xc086c000 - 0xc08cc8a8   ( 387 kB)
       .bss : 0xc08cc8a8 - 0xc09244e8   ( 352 kB)
Hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
L2C-310 enabling early BRESP for Cortex-A9
L2C-310: enabling full line of zeros but not enabled in Cortex-A9
L2C-310 ID prefetch enabled, offset 15 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 16 ways, 512 kB
L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001
sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x60633778 - 0x606337d0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated.
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
otg-vbus: 5000 mV
reg-fixed-voltage usb-otg-regulator: otg-vbus supplying 5000000uV
sdmmc-supply: 3300 mV
reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
reg-fixed-voltage sdmmc-regulator: Failed to find supply vin
reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517
platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral
host-pwr: 5000 mV
reg-fixed-voltage usb-host-regulator: host-pwr supplying 5000000uV
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
NET: Registered protocol family 23
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.610:1): initialized
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.23)
msgmni has been set to 1467
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
simple-framebuffer df000000.framebuffer: framebuffer at 0xdf000000, 0x384000 bytes, mapped to 0xf0400000
simple-framebuffer df000000.framebuffer: format=r8g8b8, mode=1280x720x24, linelength=5120
Console: switching to colour frame buffer device 160x45
simple-framebuffer df000000.framebuffer: fb0: simplefb registered!
dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-2364208
dma-pl330 20018000.dma-controller:      DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-2364208
dma-pl330 20078000.dma-controller:      DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A
dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A
console [ttyS2] disabled
dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A
console [ttyS2] enabled
console [ttyS2] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
rockchip_emac 10204000.ethernet: Looking up phy-supply from device tree
platform 10204000.ethernet: Driver rockchip_emac requests probe deferral
usbcore: registered new interface driver rtl8192cu
usbcore: registered new interface driver ax88179_178a
dwc2 10180000.usb: DWC OTG Controller
dwc2 10180000.usb: new USB bus registered, assigned bus number 1
dwc2 10180000.usb: irq 48, io mem 0x00000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 3.18.0-rc5+ dwc2_hsotg
usb usb1: SerialNumber: 10180000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
dwc2 101c0000.usb: DWC OTG Controller
dwc2 101c0000.usb: new USB bus registered, assigned bus number 2
dwc2 101c0000.usb: irq 49, io mem 0x00000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: DWC OTG Controller
usb usb2: Manufacturer: Linux 3.18.0-rc5+ dwc2_hsotg
usb usb2: SerialNumber: 101c0000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0
VCC_DDR: 1200 mV
VDD_LOG: 1000 mV
VDD_ARM: 875 <--> 1300 mV at 1000 mV
VCC_IO: 3300 mV
VDD_10: 1000 mV
VDD_HDMI: 2500 mV
VCC_18: 1800 mV
VCCA_33: 3300 mV
VCC_RMII: 3300 mV
VCCIO_WL: 3300 mV
VCC18_IO: 1800 mV
VCC_28: 2800 mV
rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0094000
rk3x-i2c 20056000.i2c: using default SCL frequency: 100000
rk3x-i2c 20056000.i2c: Initialized RK3xxx I2C bus at f0096000
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
IR XMP protocol handler initialized
Registered IR keymap rc-empty
input: gpio_ir_recv as /devices/gpio-ir-receiver/rc/rc0/input0
rc0: gpio_ir_recv as /devices/gpio-ir-receiver/rc/rc0
input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1
rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 2-1: new high-speed USB device number 2 using dwc2
gspca_main: v2.14.0 registered
usbcore: registered new interface driver em28xx
em28xx: Registered (Em28xx v4l2 Extension) extension
em28xx: Registered (Em28xx Input Extension) extension
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
usbcore: registered new interface driver btusb
Synopsys Designware Multimedia Card Interface Driver
dwmmc_rockchip 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default
dwmmc_rockchip 10214000.dwmmc: Using PIO mode.
dwmmc_rockchip 10214000.dwmmc: Version ID is 240a
dwmmc_rockchip 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 128 deep fifo
dwmmc_rockchip 10214000.dwmmc: Looking up vmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@10214000 failed
platform 10214000.dwmmc: Driver dwmmc_rockchip requests probe deferral
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver rtl8723au
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
sdmmc-supply: 3300 mV
reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
sdmmc-supply: supplied by VCC_IO
reg-fixed-voltage sdmmc-regulator: sdmmc-supply supplying 3300000uV
rockchip_emac 10204000.ethernet: Looking up phy-supply from device tree
rockchip_emac 10204000.ethernet: ARC EMAC detected with id: 0x7fd02
rockchip_emac 10204000.ethernet: IRQ is 51
rockchip_emac 10204000.ethernet: MAC address is now 12:21:34:43:56:65
libphy: Synopsys MII Bus: probed
rockchip_emac 10204000.ethernet: connected to Generic PHY phy with id 0xffffc0f1
dwmmc_rockchip 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default
dwmmc_rockchip 10214000.dwmmc: Using PIO mode.
dwmmc_rockchip 10214000.dwmmc: Version ID is 240a
dwmmc_rockchip 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 64 deep fifo
dwmmc_rockchip 10214000.dwmmc: Looking up vmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@10214000 failed
dwmmc_rockchip 10214000.dwmmc: No vqmmc regulator found
dwmmc_rockchip 10214000.dwmmc: 1 slots initialized
input: gpio-keys as /devices/gpio-keys/input/input2
rtc-hym8563 1-0051: setting system clock to 2014-11-25 22:04:12 UTC (1416953052)
Waiting for root device /dev/mmcblk0p1...
mmc_host mmc0: Bus speed (slot 0) = 31821429Hz (slot req 25000000Hz, actual 15910714HZ div = 1)
mmc0: new SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL16G 14.8 GiB
 mmcblk0: p1
usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB2.0 Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
devtmpfs: mounted
Freeing unused kernel memory: 316K (c081d000 - c086c000)
random: nonblocking pool is initialized
usb 2-1.1: new high-speed USB device number 3 using dwc2
usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0724
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: 802.11n WLAN Adapter
usb 2-1.1: Manufacturer: Realtek
usb 2-1.1: SerialNumber: 00e04c000001
INIT: version 2.88 booting

   OpenRC 0.12.4 is starting up Gentoo Linux (armv7l)

 * Mounting /proc ...
 [ ok ]
 * Mounting /run ...
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Using /dev mounted from kernel ...
 [ ok ]
 * Mounting /dev/pts ...
 [ ok ]
 * Mounting /dev/shm ...
 [ ok ]
 * Creating list of required static device nodes for the current kernel ...
Warning: /lib/modules/3.18.0-rc5+/modules.devname not found - ignoring
 [ ok ]
 * Mounting /sys ...
 [ ok ]
 * Mounting debug filesystem ...
 [ ok ]
 * Mounting config filesystem ...
 [ ok ]
 * Mounting cgroup filesystem ...
 [ ok ]
 * Mounting fuse control filesystem ...
 [ ok ]
 * setting up tmpfiles.d entries for /dev ...
 [ ok ]
 * Starting udev ...
 [ ok ]
 * Generating a rule to create a /dev/root symlink ...
calling: info
 [ ok ]
 * Populating /dev with existing devices through uevents ...
calling: trigger
calling: trigger
 [ ok ]
 * Waiting for uevents to be processed ...
calling: settle
 [ ok ]
 * Setting system clock using the hardware clock [UTC] ...
 [ ok ]
 * Autoloaded 0 module(s)
 * Checking local filesystems  ...
 [ ok ]
 * Remounting filesystems ...
 [ ok ]
 * Updating /etc/mtab ...
 [ ok ]
 * Activating swap devices ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Configuring kernel parameters ...
 [ ok ]
 * Creating user login records ...
 [ ok ]
 * Wiping /tmp directory ...
 [ ok ]
 * Setting hostname to radxarock ...
 [ ok ]
 * Setting terminal encoding [UTF-8] ...
 [ ok ]
 * Setting keyboard mode [UTF-8] ...
 [ ok ]
 * Loading key mappings [us] ...
 [ ok ]
 * Bringing up network interface lo ...
 [ ok ]
 * Activating additional swap space ...
 [ ok ]
 * setting up tmpfiles.d entries ...
 [ ok ]
 * Initializing random number generator ...
 [ ok ]
INIT: Entering runlevel: 3
 * Bringing up interface eth0
 *   dhcp ...
 *     Running dhcpcd ...
dhcpcd[807]: version 6.4.7 starting
dhcpcd[807]: DUID 00:01:00:01:14:b1:d3:da:12:21:34:43:56:65
dhcpcd[807]: eth0: IAID 34:43:56:65
dhcpcd[807]: eth0: rebinding lease of 192.168.1.2
dhcpcd[807]: eth0: leased 192.168.1.2 for 86400 seconds
dhcpcd[807]: eth0: adding route to 192.168.1.0/24
dhcpcd[807]: eth0: adding default route via 192.168.1.1
dhcpcd[807]: forked to background, child pid 851
 [ ok ]
 *     received address 192.168.1.2/24
 [ ok ]
 * You must start and configure amuled before launch it. Sorry.
 * ERROR: amuled failed to start
 * Starting BitTorrent Sync ...
By using this application, you agree to our Privacy Policy, Terms of Use and End User License Agreement.
http://www.bittorrent.com/legal/privacy
http://www.bittorrent.com/legal/terms-of-use
http://www.bittorrent.com/legal/eula

BitTorrent Sync forked to background. pid = 913. default port = 8888
 [ ok ]
 * Checking mysqld configuration for mysql ...
141125 23:04:32 [Warning] No argument was provided to --log-bin and neither --log-basename or --log-bin-index where used;  This may cause repliction to break when this server acts as a master and has its hostname changed! Please use '--log-basename=radxarock' or '--log-bin=mysqld-bin' to avoid this problem.
141125 23:04:32 [ERROR] mysqld: File './mysqld-bin.index' not found (Errcode: 13)
141125 23:04:32 [ERROR] Aborting

 * mysql config check failed
 [ !! ]
 * ERROR: mysql failed to start
 * Mounting network filesystems ...
 [ ok ]
 * Setting clock via the NTP client 'ntpdate' ...
 [ ok ]
 * Starting rpcbind ...
 [ ok ]
 * Starting NFS statd ...
 [ ok ]
 * Setting up RPC pipefs ...
 [ ok ]
 * Starting idmapd ...
 [ ok ]
 * Mounting nfsd filesystem in /proc ...
 [ ok ]
 * Starting NFS mountd ...
 [ ok ]
 * Starting NFS daemon ...
 [ ok ]
 * Starting NFS smnotify ...
 [ ok ]
/lib/rc/sh/rc-cgroup.sh: line 87: /sys/fs/cgroup/openrc/nfsmount/tasks: No such file or directory
 * Starting NFS sm-notify ...
 [ ok ]
 * Mounting NFS filesystems ...
 [ ok ]
 * Checking nginx' configuration ...
 [ ok ]
 * Starting nginx ...
 [ ok ]
 * Starting PHP FastCGI Process Manager ...
[25-Nov-2014 23:04:49] WARNING: [pool www] pm.start_servers is not set. It's been set to 20.
 [ ok ]
 * Starting sshd ...
 [ ok ]
Started Subsonic [PID 1281, /var/subsonic/subsonic_sh.log]
 [ ok ]
 * Starting transmission daemon ...
 [ ok ]
 * Starting local
 [ ok ]
skbuff: skb_over_panic: text:c0323a64 len:106 put:64 head:ee38fa00 data:ee38fa02 tail:0xee38fa6c end:0xee38fa40 dev:eth0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:100!
Internal error: Oops - BUG: 0 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc5+ #10
task: c0877d68 ti: c086c000 task.ti: c086c000
PC is at skb_panic+0x58/0x64
LR is at console_unlock+0x374/0x3a8
pc : [<c0499b4c>]    lr : [<c0055034>]    psr: 600f0113
sp : c086ddb8  ip : c086dcc8  fp : c086dde4
r10: ee3ec2d0  r9 : f009e000  r8 : ed9ecf40
r7 : c07783f4  r6 : ee38fa00  r5 : ee38fa02  r4 : ee38fa6c
r3 : c087c33c  r2 : c087c33c  r1 : 600f0113  r0 : 00000078
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 8d09404a  DAC: 00000015
Process swapper/0 (pid: 0, stack limit = 0xc086c240)
Stack: (0xc086ddb8 to 0xc086e000)
dda0:                                                       00000040 ee38fa00
ddc0: ee38fa02 ee38fa6c ee38fa40 ee3ec000 0000eab3 00000000 c086de04 c086dde8
dde0: c049b530 c0499b00 003265be ee3ec000 0000003c ee3ed000 c086de4c c086de08
de00: c0323a64 c049b4ec c088ffc0 0000134e 2df71000 f009e1e0 00000028 ee3ec520
de20: c086de64 ee3ec520 ee7dbe00 00000028 0000012c 00001350 ee7dbe08 c08be05a
de40: c086de84 c086de50 c04a87a0 c0323834 00000001 c086e100 c086de9c 40000003
de60: c086c008 00000008 00000100 c086c000 0000000a c086e08c c086ded4 c086de88
de80: c0024498 c04a86f8 ffffffed c086c000 00000003 c086e080 c086e100 00000004
dea0: 0000134f 00200000 ee006700 00000000 00000000 c0869ba8 ee007400 00000001
dec0: ffffffed c086c000 c086deec c086ded8 c0024824 c00243bc 000000a4 00000000
dee0: c086df14 c086def0 c00569c0 c00247a4 c086df38 f0002100 c08751e0 c086df38
df00: c086df6c 00000000 c086df34 c086df18 c0008630 c0056944 c000f570 c000f574
df20: 600f0013 ffffffff c086df8c c086df38 c0012a80 c00085fc ffffffed 00000000
df40: 00000000 c001d700 c086c000 00000000 c0869cf8 00000000 00000000 ffffffed
df60: c086c000 c086df8c c086df90 c086df80 c000f570 c000f574 600f0013 ffffffff
df80: c086dfa4 c086df90 c004e1c4 c000f54c 00000000 c0874440 c086dfb4 c086dfa8
dfa0: c062afbc c004e10c c086dff4 c086dfb8 c081dc8c c062af60 ffffffff ffffffff
dfc0: c081d6e0 00000000 00000000 c0859d78 c08ccb54 c08744c0 c0859d74 c0878e64
dfe0: 6000406a 413fc090 00000000 c086dff8 60008074 c081d95c 00000000 00000000
Backtrace:
[<c0499af4>] (skb_panic) from [<c049b530>] (skb_put+0x50/0x5c)
 r7:00000000
[<c049b4e0>] (skb_put) from [<c0323a64>] (arc_emac_poll+0x23c/0x438)
 r6:ee3ed000 r5:0000003c r4:ee3ec000 r3:003265be
[<c0323828>] (arc_emac_poll) from [<c04a87a0>] (net_rx_action+0xb4/0x16c)
 r10:c08be05a r9:ee7dbe08 r8:00001350 r7:0000012c r6:00000028 r5:ee7dbe00
 r4:ee3ec520
[<c04a86ec>] (net_rx_action) from [<c0024498>] (__do_softirq+0xe8/0x218)
 r10:c086e08c r9:0000000a r8:c086c000 r7:00000100 r6:00000008 r5:c086c008
 r4:40000003
[<c00243b0>] (__do_softirq) from [<c0024824>] (irq_exit+0x8c/0xb0)
 r10:c086c000 r9:ffffffed r8:00000001 r7:ee007400 r6:c0869ba8 r5:00000000
 r4:00000000
[<c0024798>] (irq_exit) from [<c00569c0>] (__handle_domain_irq+0x88/0xa8)
 r4:00000000 r3:000000a4
[<c0056938>] (__handle_domain_irq) from [<c0008630>] (gic_handle_irq+0x40/0x64)
 r8:00000000 r7:c086df6c r6:c086df38 r5:c08751e0 r4:f0002100 r3:c086df38
[<c00085f0>] (gic_handle_irq) from [<c0012a80>] (__irq_svc+0x40/0x54)
Exception stack(0xc086df38 to 0xc086df80)
df20:                                                       ffffffed 00000000
df40: 00000000 c001d700 c086c000 00000000 c0869cf8 00000000 00000000 ffffffed
df60: c086c000 c086df8c c086df90 c086df80 c000f570 c000f574 600f0013 ffffffff
 r6:ffffffff r5:600f0013 r4:c000f574 r3:c000f570
[<c000f540>] (arch_cpu_idle) from [<c004e1c4>] (cpu_startup_entry+0xc4/0x20c)
[<c004e100>] (cpu_startup_entry) from [<c062afbc>] (rest_init+0x68/0x80)
 r7:c0874440 r3:00000000
[<c062af54>] (rest_init) from [<c081dc8c>] (start_kernel+0x33c/0x3a8)
[<c081d950>] (start_kernel) from [<60008074>] (0x60008074)
Code: e1a0300c e58de010 e59f0008 eb0648d8 (e7f001f2)
---[ end trace 916f4126c213f31f ]---
Kernel panic - not syncing: Fatal exception in interrupt
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D        3.18.0-rc5+ #10
Backtrace:
[<c0011cfc>] (dump_backtrace) from [<c0011fb0>] (show_stack+0x18/0x1c)
 r6:00000000 r5:00000001 r4:00000000 r3:00200040
[<c0011f98>] (show_stack) from [<c062d358>] (dump_stack+0x78/0x94)
[<c062d2e0>] (dump_stack) from [<c0013f3c>] (handle_IPI+0xd0/0x168)
 r4:c08ccb98 r3:c087c33c
[<c0013e6c>] (handle_IPI) from [<c000864c>] (gic_handle_irq+0x5c/0x64)
 r6:ee099f70 r5:c08751e0 r4:f0002100 r3:00000005
[<c00085f0>] (gic_handle_irq) from [<c0012a80>] (__irq_svc+0x40/0x54)
Exception stack(0xee099f70 to 0xee099fb8)
9f60:                                     ffffffed 00000000 00000000 c001d700
9f80: ee098000 00000000 c0869cf8 00000000 00000000 ffffffed ee098000 ee099fc4
9fa0: ee099fc8 ee099fb8 c000f570 c000f574 600e0013 ffffffff
 r6:ffffffff r5:600e0013 r4:c000f574 r3:c000f570
[<c000f540>] (arch_cpu_idle) from [<c004e1c4>] (cpu_startup_entry+0xc4/0x20c)
[<c004e100>] (cpu_startup_entry) from [<c0013c3c>] (secondary_start_kernel+0x114/0x134)
 r7:c08ccbc4 r3:0000007f
[<c0013b28>] (secondary_start_kernel) from [<600086e4>] (0x600086e4)
 r4:8e06006a r3:c00086cc
CPU2: stopping
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D        3.18.0-rc5+ #10
Backtrace:
[<c0011cfc>] (dump_backtrace) from [<c0011fb0>] (show_stack+0x18/0x1c)
 r6:00000000 r5:00000002 r4:00000000 r3:00200040
[<c0011f98>] (show_stack) from [<c062d358>] (dump_stack+0x78/0x94)
[<c062d2e0>] (dump_stack) from [<c0013f3c>] (handle_IPI+0xd0/0x168)
 r4:c08ccb98 r3:c087c33c
[<c0013e6c>] (handle_IPI) from [<c000864c>] (gic_handle_irq+0x5c/0x64)
 r6:ee09bf70 r5:c08751e0 r4:f0002100 r3:00000005
[<c00085f0>] (gic_handle_irq) from [<c0012a80>] (__irq_svc+0x40/0x54)
Exception stack(0xee09bf70 to 0xee09bfb8)
bf60:                                     ffffffed 00000000 00000000 c001d700
bf80: ee09a000 00000000 c0869cf8 00000000 00000000 ffffffed ee09a000 ee09bfc4
bfa0: ee09bfc8 ee09bfb8 c000f570 c000f574 60030013 ffffffff
 r6:ffffffff r5:60030013 r4:c000f574 r3:c000f570
[<c000f540>] (arch_cpu_idle) from [<c004e1c4>] (cpu_startup_entry+0xc4/0x20c)
[<c004e100>] (cpu_startup_entry) from [<c0013c3c>] (secondary_start_kernel+0x114/0x134)
 r7:c08ccbc4 r3:00000083
[<c0013b28>] (secondary_start_kernel) from [<600086e4>] (0x600086e4)
 r4:8e06006a r3:c00086cc
CPU3: stopping
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D        3.18.0-rc5+ #10
Backtrace:
[<c0011cfc>] (dump_backtrace) from [<c0011fb0>] (show_stack+0x18/0x1c)
 r6:00000000 r5:00000003 r4:00000000 r3:00200040
[<c0011f98>] (show_stack) from [<c062d358>] (dump_stack+0x78/0x94)
[<c062d2e0>] (dump_stack) from [<c0013f3c>] (handle_IPI+0xd0/0x168)
 r4:c08ccb98 r3:c087c33c
[<c0013e6c>] (handle_IPI) from [<c000864c>] (gic_handle_irq+0x5c/0x64)
 r6:ee09df70 r5:c08751e0 r4:f0002100 r3:00000005
[<c00085f0>] (gic_handle_irq) from [<c0012a80>] (__irq_svc+0x40/0x54)
Exception stack(0xee09df70 to 0xee09dfb8)
df60:                                     ffffffed 00000000 00000000 c001d700
df80: ee09c000 00000000 c0869cf8 00000000 00000000 ffffffed ee09c000 ee09dfc4
dfa0: ee09dfc8 ee09dfb8 c000f570 c000f574 60010013 ffffffff
 r6:ffffffff r5:60010013 r4:c000f574 r3:c000f570
[<c000f540>] (arch_cpu_idle) from [<c004e1c4>] (cpu_startup_entry+0xc4/0x20c)
[<c004e100>] (cpu_startup_entry) from [<c0013c3c>] (secondary_start_kernel+0x114/0x134)
 r7:c08ccbc4 r3:00000087
[<c0013b28>] (secondary_start_kernel) from [<600086e4>] (0x600086e4)
 r4:8e06006a r3:c00086cc
---[ end Kernel panic - not syncing: Fatal exception in interrupt