Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 109 092 006 Pre-fail Always - 96921456
- 3 Spin_Up_Time 0x0003 087 084 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 535
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 076 046 030 Pre-fail Always - 52096220279
- 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23258
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 945
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 049 029 045 Old_age Always In_the_past 51 (Min/Max 24/52 #39)
- 194 Temperature_Celsius 0x0022 051 071 000 Old_age Always - 51 (0 18 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 064 057 000 Old_age Always - 224024114
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
- 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 100 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 100 occurred at disk power-on lifetime: 6910 hours (287 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 10 51 01 a9 c4 42 e5
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 37 00 01 a9 c4 42 e5 00 08:17:22.440 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 00 a9 c4 42 e0 00 08:17:22.406 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 00 a9 c4 42 e5 00 08:17:27.923 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 01 a9 c4 42 e0 00 08:17:27.864 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 01 a9 c4 42 e5 00 08:17:27.639 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- Error 99 occurred at disk power-on lifetime: 6910 hours (287 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 10 51 01 a9 c4 42 e5
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 37 00 01 a9 c4 42 e5 00 08:17:22.440 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 00 a9 c4 42 e0 00 08:17:22.406 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 00 a9 c4 42 e5 00 08:17:22.406 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 01 ea cc 42 e0 00 08:17:21.077 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 29 00 01 ea cc 42 e0 00 08:17:21.076 READ MULTIPLE EXT
- Error 98 occurred at disk power-on lifetime: 6906 hours (287 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 10 51 01 a9 c4 42 e5
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 37 00 01 a9 c4 42 e5 00 04:10:00.783 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 00 a9 c4 42 e0 00 04:10:00.712 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 00 a9 c4 42 e5 00 04:09:59.103 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 01 a9 c4 42 e0 00 04:09:58.271 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 01 a9 c4 42 e5 00 04:09:58.238 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- Error 97 occurred at disk power-on lifetime: 6906 hours (287 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 10 51 01 a9 c4 42 e5
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 37 00 01 a9 c4 42 e5 00 04:10:00.783 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 00 a9 c4 42 e0 00 04:10:00.712 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 00 a9 c4 42 e5 00 04:09:59.103 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 01 ea cc 42 e0 00 04:09:58.271 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 29 00 01 ea cc 42 e0 00 04:09:58.238 READ MULTIPLE EXT
- Error 96 occurred at disk power-on lifetime: 6863 hours (285 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 10 51 01 a9 c4 42 e5
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 37 00 01 a9 c4 42 e5 00 00:12:51.087 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 00 a9 c4 42 e0 00 00:12:51.041 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 00 a9 c4 42 e5 00 00:12:56.545 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 27 00 01 a9 c4 42 e0 00 00:12:56.486 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- 37 00 01 a9 c4 42 e5 00 00:12:56.261 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- SMART Self-test log structure revision number 1
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement