API tools faq
paste
Guest User

dmesg

a guest
Dec 30th, 2013
125
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 7.39 KB | None | 0 0
raw download clone embed print report
  1. bash-3.00# dmesg
  2. t/comcerto_ved.c: 1386: SetupSMIBuffers: 800 buffers allocated
  3.  
  4. Comcerto SMI: fpq(PA): 0x90013f8
  5. Comcerto SMI: fpq(VA): 0xf90013f8
  6. Comcerto SMI: fpq(PA): 0x9001418
  7. Comcerto SMI: fpq(VA): 0xf9001418
  8. Comcerto SMI: fpq(PA): 0x80002c0
  9. Comcerto SMI: fpq(VA): 0xf80002c0
  10. Comcerto SMI: fpq(PA): 0x80002d0
  11. Comcerto SMI: fpq(VA): 0xf80002d0
  12. Comcerto SMI: fpq(PA): 0x9001408
  13. Comcerto SMI: fpq(VA): 0xf9001408
  14. Comcerto SMI: fpq(PA): 0x9001428
  15. Comcerto SMI: fpq(VA): 0xf9001428
  16. PPP generic driver version 2.4.2
  17. PPP Deflate Compression module registered
  18. PPP BSD Compression module registered
  19. MPPE/MPPC encryption/compression module registered
  20. SPI core: add adapter comcerto-spi
  21. Crypto engine MSPD IPsec2 registered
  22. NAND flash device ID for chip 0 is
  23.  0 : ec
  24.  1 : dc
  25.  2 : 10
  26.  3 : 95
  27.  4 : 54
  28. NAND flash chip-0: number of bad blocks = 1 (reserved max. 100)
  29. NAND flash chip-0: number of partitions = 9
  30. FD_Init is successful
  31.  /dev/devfs_ufd0: unknown partition table
  32. NET: Registered protocol family 2
  33. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  34. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  35. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  36. TCP: Hash tables configured (established 4096 bind 4096)
  37. TCP reno registered
  38. IPv4 over IPv4 tunneling driver
  39. TCP bic registered
  40. Initializing IPsec netlink socket
  41. NET: Registered protocol family 1
  42. NET: Registered protocol family 10
  43. Disabled Privacy Extensions on device c02c8f30(lo)
  44. IPv6 over IPv4 tunneling driver
  45. NET: Registered protocol family 17
  46. NET: Registered protocol family 15
  47. RAMDISK: squashfs-lzma filesystem found at block 0
  48. RAMDISK: Loading 1970KiB [1 disk] into ram disk... done.
  49. VFS: Mounted root (squashfs filesystem) readonly.
  50. Freeing init memory: 108K
  51.  /dev/devfs_ufda: unknown partition table
  52.  /dev/devfs_ufdb: unknown partition table
  53.  /dev/devfs_ufdc: unknown partition table
  54. SPI core: add driver eeprom
  55. SPI core: attach client to adapter comcerto-spi
  56. Probing EEPROM ...found.
  57. kjournald starting.  Commit interval 5 seconds
  58. EXT3 FS on ufda, internal journal
  59. EXT3-fs: recovery complete.
  60. EXT3-fs: mounted filesystem with ordered data mode.
  61. eth0: no IPv6 routers present
  62. kjournald starting.  Commit interval 5 seconds
  63. EXT3 FS on ufdc, internal journal
  64. EXT3-fs: recovery complete.
  65. EXT3-fs: mounted filesystem with ordered data mode.
  66. kjournald starting.  Commit interval 5 seconds
  67. EXT3 FS on ufdc, internal journal
  68. EXT3-fs: mounted filesystem with ordered data mode.
  69. Initalize UMOUNT Module
  70. UMOUNT Module Insert success
  71. NMI request_irq success
  72. ip_tables: (C) 2000-2002 Netfilter core team
  73. eth0: no IPv6 routers present
  74. init_special_inode: bogus i_mode (177777)
  75. init_special_inode: bogus i_mode (177777)
  76. init_special_inode: bogus i_mode (177777)
  77. init_special_inode: bogus i_mode (177777)
  78. init_special_inode: bogus i_mode (177777)
  79. init_special_inode: bogus i_mode (177777)
  80. init_special_inode: bogus i_mode (177777)
  81. init_special_inode: bogus i_mode (177777)
  82. init_special_inode: bogus i_mode (177777)
  83. init_special_inode: bogus i_mode (177777)
  84. init_special_inode: bogus i_mode (177777)
  85. init_special_inode: bogus i_mode (177777)
  86. init_special_inode: bogus i_mode (177777)
  87. init_special_inode: bogus i_mode (177777)
  88. init_special_inode: bogus i_mode (177777)
  89. init_special_inode: bogus i_mode (177777)
  90. RTCore Operating System (http://www.windriver.com/) ready: 1 CPU
  91. RTC 8564 Driver
  92. NET: Registered protocol family 27
  93. eth1: no IPv6 routers present
  94. Driver: 16550
  95. takeover_ports : 2
  96. ---------continue
  97. takeover_ports : 2
  98. UART detected at Base Address: D0094000 Fifosize: 16
  99. Registered device /dev/rtl_ttyS0
  100. [isdn-dev] Loading ISDN device module
  101. [isdn-dev]Device registered with Major Number = 0
  102. [isdn-dev] end of variable initiation
  103. modified by pinzero !!!
  104. Setup RTCore Watchdog..
  105. Loading DLI device module.
  106.  
  107. ############## ISDN MAIN START ##############
  108.  
  109.  
  110. ------------  <<<<  OS Compact SP S/W  >>>>   02.46    (2010.02.22 10:00)    INITIAL START -------------<4>ip_conntrack: Ignoring new-style parameters in presence of obsolete ones
  111. ip_conntrack version 2.1 (8192 buckets, 65536 max) - 256 bytes per conntrack
  112. IP_CONNTRACK control Driver Version 0.2 (C)
  113. MPSDNAT control Driver Version 1.21 (C)
  114. MPSDNAT misc register completion! Ver 1.21 (C)
  115.  
  116. [SYS] PRAL : D8280000, MD : D8400000, ENGINE : D8580000
  117. [SYS] DEVICE OPEN SUCCESS !!
  118.  
  119. [SYS] COMPACT SYSTEM MODE : STAND ALONE
  120. [SYS] COMPACT SW PORT & CH MAP INITIAL[ISDN-APPL] MESSAGE NB 300
  121. [ISDN-DEV] /os7100/sys/fifo/bri/bri_rx opened successfully with FD = 60
  122.  ## brm exist !!!
  123. waiting ..............
  124. waiting ..............
  125.  [CLIE][SP] client_proc(): Recv APIT_OK MSG!(header: 7e8f0301 0000)
  126.  
  127. [SYS] SP <-> APIS fifo creation OK!
  128. [SYS] ALL CARD RESET START (0x0d)
  129. [SYS] ALL CARD & DEVICE RESET END (0xf2)
  130. [SYS] MBD CPLD VER:07, PCB VER:02
  131. [SYS] COMPACT SYSTEM CODEC: A-LAW
  132. [SYS] INTERRUPT MASKED RX : 0x7f, TX : 0x3f
  133. [SYS] COMPACT DLI QDASL CHIP RESET
  134. [SYS] SP_10MSEC_THREAD start
  135. [SYS] SP_50MSEC_THREAD start
  136. [SYS] SP_BASE_THREAD start
  137. [SYS] SEND SP(0) Status ack message!
  138. [SYS] COMPACT SYSTEM CODEC: A-LAW
  139. [SYS] COUNTRY[11] : Default_KOREA
  140. [ISDN-APPL] : country 03e8, operator 0b
  141. [ISDN-APPL] : NAI(0): POINT_TO_POINT
  142.  
  143. [ISDN-APPL] : NAI(1): POINT_TO_POINT
  144.  
  145. [SYS] Card Activation Message Received (Slot: 0x00)
  146. [SYS] Card Activation Message Received (Slot: 0x01)
  147. [SYS] Card Activation Message Received (Slot: 0x02)
  148. [SYS] Card Activation Message Received (Slot: 0x03)
  149. [SYS] DM INITIAL SLOT[02]  start : 08, end : 0C
  150. [SYS] DLI_RX interrupt registered
  151. [SYS] DLI_TX interrupt registered!! NAND SLEEP TOO LONG: pid=730, how_long=3890(msec), where=FTL_sema
  152. !! WAKEUP FORCED
  153. !! NAND SLEEP TOO LONG: pid=979, how_long=3510(msec), where=LLD
  154. !! WAKEUP FORCED
  155. !! NAND SLEEP TOO LONG: pid=1066, how_long=3850(msec), where=FTL_sema
  156. !! WAKEUP FORCED
  157. !! NAND SLEEP TOO LONG: pid=1098, how_long=3190(msec), where=FTL_sema
  158. !! WAKEUP FORCED
  159. !! NAND SLEEP TOO LONG: pid=1097, how_long=3150(msec), where=FTL_sema
  160. !! WAKEUP FORCED
  161.  
  162. [SM] Initial Success      slot: 00
  163. [SM] Initial Success      slot: 01[ISDN] IN 00 > 01
  164. [ISDN-DEV] Slip detected NAI(0)
  165. [ISDN-DEV] Slip detected NAI(0)
  166. [ISDN-DEV] Slip detected NAI(0)
  167. [ISDN-DEV] Slip detected NAI(0)
  168. ph_d_sx.c(2800): [ISDN-DEV] OUT 01 > 00
  169. [ISDN] IN 00 > 01
  170. [ISDN-DEV] Slip detected NAI(0)
  171. [ISDN-DEV] Slip detected NAI(0)
  172. [ISDN-DEV] Slip detected NAI(0)
  173. [ISDN-DEV] Slip detected NAI(0)
  174. [ISDN-DEV] Slip detected NAI(0)
  175. ph_d_sx.c(2800): [ISDN-DEV] OUT 01 > 00
  176. [ISDN] IN 00 > 01
  177. [ISDN-DEV] Slip detected NAI(0)
  178. [ISDN-DEV] Slip detected NAI(0)
  179. [ISDN-DEV] Slip detected NAI(0)
  180. [ISDN-DEV] Slip detected NAI(0)
  181. [ISDN-DEV] Slip detected NAI(0)
  182. [ISDN-DEV] Slip detected NAI(0)
  183. ph_d_sx.c(2800): [ISDN-DEV] OUT 01 > 00
  184. [ISDN] IN 00 > 01
  185. ph_d_sx.c(2800): [ISDN-DEV] OUT 01 > 00
  186. [ISDN] IN 00 > 01
  187. [ISDN-DEV] Slip detected NAI(0)
  188. [ISDN-DEV] Slip detected NAI(0)
  189. ph_d_sx.c(2800): [ISDN-DEV] OUT 01 > 00
  190. [ISDN] IN 00 > 01
  191. [ISDN-DEV] Slip detected NAI(0)
  192. [ISDN-DEV] Slip detected NAI(0)
  193. [ISDN-DEV] Slip detected NAI(0)
  194. [ISDN-DEV] Slip detected NAI(0)
  195. [ISDN-DEV] Slip detected NAI(0)
  196. [ISDN-DEV] Slip detected NAI(0)
  197. [ISDN-DEV] Slip detected NAI(0)
  198. ph_d_sx.c(2800): [ISDN-DEV] OUT 01 > 00
  199. [ISDN] IN 00 > 01
  200. [ISDN-DEV] Slip detected NAI(0)
  201. [ISDN-DEV] Slip detected NAI(0)
  202. [ISDN-DEV] Slip detected NAI(0)
  203. [ISDN-DEV] Slip detected NAI(0)
  204. [ISDN-DEV] Slip detected NAI(0)
  205. ph_d_sx.c(2800): [ISDN-DEV] OUT 01 > 00
  206. bash-3.00#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!