API tools faq
paste
Advertisement
Guest User

r26018 dmesg

a guest
Aug 25th, 2010
119
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.24 KB | None | 0 0
raw download clone embed print report
  1. [ 0.363162] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
  2. [ 0.363416] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
  3. [ 0.363658] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
  4. [ 0.363899] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
  5. [ 0.364139] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
  6. [ 0.364383] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
  7. [ 0.364623] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
  8. [ 0.364874] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
  9. [ 0.365113] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
  10. [ 0.365260] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
  11. [ 0.365282] vgaarb: loaded
  12. [ 0.365426] SCSI subsystem initialized
  13. [ 0.365554] libata version 3.00 loaded.
  14. [ 0.365645] usbcore: registered new interface driver usbfs
  15. [ 0.365659] usbcore: registered new interface driver hub
  16. [ 0.365701] usbcore: registered new device driver usb
  17. [ 0.365947] ACPI: WMI: Mapper loaded
  18. [ 0.365950] PCI: Using ACPI for IRQ routing
  19. [ 0.366195] NetLabel: Initializing
  20. [ 0.366197] NetLabel: domain hash size = 128
  21. [ 0.366199] NetLabel: protocols = UNLABELED CIPSOv4
  22. [ 0.366219] NetLabel: unlabeled traffic allowed by default
  23. [ 0.366277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
  24. [ 0.366283] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
  25. [ 0.380068] Switching to clocksource hpet
  26. [ 0.382247] AppArmor: AppArmor Filesystem Enabled
  27. [ 0.382273] pnp: PnP ACPI init
  28. [ 0.382295] ACPI: bus type pnp registered
  29. [ 0.385846] pnp: PnP ACPI: found 13 devices
  30. [ 0.385849] ACPI: ACPI bus type pnp unregistered
  31. [ 0.385866] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
  32. [ 0.385875] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
  33. [ 0.385879] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
  34. [ 0.385883] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
  35. [ 0.385886] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
  36. [ 0.385894] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved
  37. [ 0.385902] system 00:04: ioport range 0x1000-0x107f has been reserved
  38. [ 0.385906] system 00:04: ioport range 0x1080-0x10ff has been reserved
  39. [ 0.385909] system 00:04: ioport range 0x1400-0x147f has been reserved
  40. [ 0.385913] system 00:04: ioport range 0x1480-0x14ff has been reserved
  41. [ 0.385916] system 00:04: ioport range 0x1800-0x187f has been reserved
  42. [ 0.385920] system 00:04: ioport range 0x1880-0x18ff has been reserved
  43. [ 0.385923] system 00:04: ioport range 0x2000-0x203f has been reserved
  44. [ 0.385930] system 00:05: ioport range 0x360-0x361 has been reserved
  45. [ 0.385934] system 00:05: ioport range 0x380-0x383 has been reserved
  46. [ 0.385937] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
  47. [ 0.390763] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
  48. [ 0.390768] pci 0000:00:02.0: IO window: 0x4000-0x4fff
  49. [ 0.390772] pci 0000:00:02.0: MEM window: 0xb4000000-0xb5ffffff
  50. [ 0.390776] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff
  51. [ 0.390781] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
  52. [ 0.390784] pci 0000:00:03.0: IO window: disabled
  53. [ 0.390787] pci 0000:00:03.0: MEM window: 0xb6000000-0xb7ffffff
  54. [ 0.390791] pci 0000:00:03.0: PREFETCH window: disabled
  55. [ 0.390796] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07
  56. [ 0.390799] pci 0000:00:10.0: IO window: disabled
  57. [ 0.390803] pci 0000:00:10.0: MEM window: 0xb8000000-0xb80fffff
  58. [ 0.390806] pci 0000:00:10.0: PREFETCH window: disabled
  59. [ 0.390819] pci 0000:00:02.0: setting latency timer to 64
  60. [ 0.390825] pci 0000:00:03.0: setting latency timer to 64
  61. [ 0.390831] pci 0000:00:10.0: setting latency timer to 64
  62. [ 0.390837] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  63. [ 0.390840] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
  64. [ 0.390844] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
  65. [ 0.390847] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb5ffffff]
  66. [ 0.390851] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd01fffff]
  67. [ 0.390854] pci_bus 0000:03: resource 1 mem: [0xb6000000-0xb7ffffff]
  68. [ 0.390858] pci_bus 0000:07: resource 1 mem: [0xb8000000-0xb80fffff]
  69. [ 0.390861] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
  70. [ 0.390865] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
  71. [ 0.390912] NET: Registered protocol family 2
  72. [ 0.391071] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
  73. [ 0.391882] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
  74. [ 0.393662] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  75. [ 0.394457] TCP: Hash tables configured (established 131072 bind 65536)
  76. [ 0.394461] TCP reno registered
  77. [ 0.394587] NET: Registered protocol family 1
  78. [ 0.394623] pci 0000:00:00.0: Found disabled HT MSI Mapping
  79. [ 0.394629] pci 0000:00:00.0: Enabling HT MSI Mapping
  80. [ 0.394673] pci 0000:00:00.0: Found enabled HT MSI Mapping
  81. [ 0.394702] pci 0000:00:00.0: Found enabled HT MSI Mapping
  82. [ 0.394710] pci 0000:00:05.0: Boot video device
  83. [ 0.610110] pci 0000:00:09.0: Found enabled HT MSI Mapping
  84. [ 0.610170] pci 0000:00:09.0: Found enabled HT MSI Mapping
  85. [ 0.610233] pci 0000:00:09.0: Found enabled HT MSI Mapping
  86. [ 0.610477] Simple Boot Flag at 0x36 set to 0x1
  87. [ 0.610717] Scanning for low memory corruption every 60 seconds
  88. [ 0.610900] audit: initializing netlink socket (disabled)
  89. [ 0.610914] type=2000 audit(1282764272.602:1): initialized
  90. [ 0.621991] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  91. [ 0.623792] VFS: Disk quotas dquot_6.5.2
  92. [ 0.623878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  93. [ 0.624734] fuse init (API version 7.13)
  94. [ 0.624846] msgmni has been set to 1852
  95. [ 0.625182] alg: No test for stdrng (krng)
  96. [ 0.625278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  97. [ 0.625281] io scheduler noop registered
  98. [ 0.625284] io scheduler anticipatory registered
  99. [ 0.625286] io scheduler deadline registered
  100. [ 0.625329] io scheduler cfq registered (default)
  101. [ 0.625566] alloc irq_desc for 24 on node 0
  102. [ 0.625569] alloc kstat_irqs on node 0
  103. [ 0.625579] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
  104. [ 0.625585] pcieport 0000:00:02.0: setting latency timer to 64
  105. [ 0.625720] alloc irq_desc for 25 on node 0
  106. [ 0.625723] alloc kstat_irqs on node 0
  107. [ 0.625729] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
  108. [ 0.625734] pcieport 0000:00:03.0: setting latency timer to 64
  109. [ 0.625818] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  110. [ 0.625849] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  111. [ 0.626468] ACPI: AC Adapter [ACAD] (on-line)
  112. [ 0.626583] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  113. [ 0.626588] ACPI: Power Button [PWRB]
  114. [ 0.626639] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
  115. [ 0.626643] ACPI: Sleep Button [SLPB]
  116. [ 0.626697] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
  117. [ 0.626984] ACPI: Lid Switch [LID]
  118. [ 0.627071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  119. [ 0.627075] ACPI: Power Button [PWRF]
  120. [ 0.627462] ACPI: processor limited to max C-state 1
  121. [ 0.627500] processor LNXCPU:00: registered as cooling_device0
  122. [ 0.627550] processor LNXCPU:01: registered as cooling_device1
  123. [ 0.631757] thermal LNXTHERM:01: registered as thermal_zone0
  124. [ 0.631768] ACPI: Thermal Zone [THRM] (40 C)
  125. [ 0.633846] Linux agpgart interface v0.103
  126. [ 0.633895] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  127. [ 0.635371] brd: module loaded
  128. [ 0.635920] loop: module loaded
  129. [ 0.636054] input: Macintosh mouse button emulation as /devices/virtual/input/input4
  130. [ 0.636461] pata_acpi 0000:00:0d.0: setting latency timer to 64
  131. [ 0.636551] pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007)
  132. [ 0.637142] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
  133. [ 0.637147] alloc irq_desc for 23 on node 0
  134. [ 0.637150] alloc kstat_irqs on node 0
  135. [ 0.637162] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
  136. [ 0.637198] pata_acpi 0000:00:0e.0: setting latency timer to 64
  137. [ 0.637211] pata_acpi 0000:00:0e.0: PCI INT A disabled
  138. [ 0.637748] Fixed MDIO Bus: probed
  139. [ 0.637791] PPP generic driver version 2.4.2
  140. [ 0.637864] tun: Universal TUN/TAP device driver, 1.6
  141. [ 0.637866] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  142. [ 0.637989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  143. [ 0.638532] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
  144. [ 0.638539] alloc irq_desc for 22 on node 0
  145. [ 0.638541] alloc kstat_irqs on node 0
  146. [ 0.638554] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22
  147. [ 0.638576] ehci_hcd 0000:00:0b.1: setting latency timer to 64
  148. [ 0.638579] ehci_hcd 0000:00:0b.1: EHCI Host Controller
  149. [ 0.638641] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
  150. [ 0.638678] ehci_hcd 0000:00:0b.1: debug port 1
  151. [ 0.638688] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
  152. [ 0.638718] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000
  153. [ 0.660055] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
  154. [ 0.660169] usb usb1: configuration #1 chosen from 1 choice
  155. [ 0.660202] hub 1-0:1.0: USB hub found
  156. [ 0.660215] hub 1-0:1.0: 8 ports detected
  157. [ 0.660317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  158. [ 0.660858] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
  159. [ 0.660865] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
  160. [ 0.660897] ohci_hcd 0000:00:0b.0: setting latency timer to 64
  161. [ 0.660901] ohci_hcd 0000:00:0b.0: OHCI Host Controller
  162. [ 0.660985] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
  163. [ 0.661010] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000
  164. [ 0.722152] usb usb2: configuration #1 chosen from 1 choice
  165. [ 0.722186] hub 2-0:1.0: USB hub found
  166. [ 0.722200] hub 2-0:1.0: 8 ports detected
  167. [ 0.722302] uhci_hcd: USB Universal Host Controller Interface driver
  168. [ 0.722418] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
  169. [ 0.737268] serio: i8042 KBD port at 0x60,0x64 irq 1
  170. [ 0.737276] serio: i8042 AUX port at 0x60,0x64 irq 12
  171. [ 0.737452] mice: PS/2 mouse device common for all mice
  172. [ 0.738800] rtc_cmos 00:09: RTC can wake from S4
  173. [ 0.738867] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
  174. [ 0.738907] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
  175. [ 0.739076] device-mapper: uevent: version 1.0.3
  176. [ 0.739248] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  177. [ 0.739351] device-mapper: multipath: version 1.1.0 loaded
  178. [ 0.739354] device-mapper: multipath round-robin: version 1.0.0 loaded
  179. [ 0.739578] cpuidle: using governor ladder
  180. [ 0.739581] cpuidle: using governor menu
  181. [ 0.740082] TCP cubic registered
  182. [ 0.740243] NET: Registered protocol family 10
  183. [ 0.740889] lo: Disabled Privacy Extensions
  184. [ 0.741306] NET: Registered protocol family 17
  185. [ 0.741356] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (2 cpu cores) (version 2.20.00)
  186. [ 0.741407] powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13
  187. [ 0.741410] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
  188. [ 0.741413] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
  189. [ 0.741579] PM: Resume from disk failed.
  190. [ 0.741595] registered taskstats version 1
  191. [ 0.742067] Magic number: 6:282:446
  192. [ 0.742182] rtc_cmos 00:09: setting system clock to 2010-08-25 19:24:32 UTC (1282764272)
  193. [ 0.742186] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  194. [ 0.742188] EDD information not available.
  195. [ 0.744638] Freeing initrd memory: 8140k freed
  196. [ 0.751361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
  197. [ 0.890406] ACPI: Battery Slot [BAT0] (battery present)
  198. [ 1.140442] Freeing unused kernel memory: 880k freed
  199. [ 1.140992] Write protecting the kernel read-only data: 7696k
  200. [ 1.168668] udev: starting version 151
  201. [ 1.323138] pata_amd 0000:00:0d.0: version 0.4.1
  202. [ 1.323194] pata_amd 0000:00:0d.0: setting latency timer to 64
  203. [ 1.346989] scsi0 : pata_amd
  204. [ 1.370456] scsi1 : pata_amd
  205. [ 1.371368] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
  206. [ 1.371372] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
  207. [ 1.384163] sata_nv 0000:00:0e.0: version 3.5
  208. [ 1.384532] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
  209. [ 1.384541] alloc irq_desc for 19 on node 0
  210. [ 1.384544] alloc kstat_irqs on node 0
  211. [ 1.384557] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19
  212. [ 1.384567] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
  213. [ 1.384582] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
  214. [ 1.384586] sata_nv 0000:00:0e.0: Using SWNCQ mode
  215. [ 1.384647] sata_nv 0000:00:0e.0: setting latency timer to 64
  216. [ 1.385092] scsi2 : sata_nv
  217. [ 1.385291] scsi3 : sata_nv
  218. [ 1.385543] ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23
  219. [ 1.385548] ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23
  220. [ 1.385700] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
  221. [ 1.386124] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
  222. [ 1.386130] alloc irq_desc for 20 on node 0
  223. [ 1.386133] alloc kstat_irqs on node 0
  224. [ 1.386145] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20
  225. [ 1.386151] forcedeth 0000:00:14.0: setting latency timer to 64
  226. [ 1.386216] nv_probe: set workaround bit for reversed mac addr
  227. [ 1.500115] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
  228. [ 1.560344] ata1.00: ATAPI: Slimtype DVD A DS8A1P, CH71, max MWDMA2
  229. [ 1.560377] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
  230. [ 1.620290] ata1.00: configured for MWDMA2
  231. [ 1.624121] scsi 0:0:0:0: CD-ROM Slimtype DVD A DS8A1P CH71 PQ: 0 ANSI: 5
  232. [ 1.634882] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  233. [ 1.634887] Uniform CD-ROM driver Revision: 3.20
  234. [ 1.635040] sr 0:0:0:0: Attached scsi CD-ROM sr0
  235. [ 1.635126] sr 0:0:0:0: Attached scsi generic sg0 type 5
  236. [ 1.635256] ata2: port disabled. ignoring.
  237. [ 1.870072] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  238. [ 1.890243] ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
  239. [ 1.890247] ata3.00: 234441648 sectors, multi 16: LBA48
  240. [ 1.911351] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:06:1f:20
  241. [ 1.911356] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
  242. [ 1.930265] ata3.00: configured for UDMA/100
  243. [ 1.930410] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
  244. [ 1.930635] sd 2:0:0:0: Attached scsi generic sg1 type 0
  245. [ 1.930669] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
  246. [ 1.930740] sd 2:0:0:0: [sda] Write Protect is off
  247. [ 1.930744] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  248. [ 1.930776] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  249. [ 1.931074] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
  250. [ 1.932167] sd 2:0:0:0: [sda] Attached SCSI disk
  251. [ 2.270726] ata4: SATA link down (SStatus 0 SControl 300)
  252. [ 2.280212] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
  253. [ 2.280232] ohci1394 0000:07:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, high) -> IRQ 5
  254. [ 2.342079] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4]
  255. [ 3.043665] EXT4-fs (sda1): mounted filesystem with ordered data mode
  256. [ 3.660326] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00e5f60400]
  257. [ 14.320085] Adding 3068372k swap on /dev/sda6. Priority:-1 extents:1 across:3068372k
  258. [ 14.485111] udev: starting version 151
  259. [ 14.722212] lp: driver loaded but no devices found
  260. [ 14.906774] i2c i2c-0: nForce2 SMBus adapter at 0x3040
  261. [ 14.906807] i2c i2c-1: nForce2 SMBus adapter at 0x3000
  262. [ 15.007735] cfg80211: Calling CRDA to update world regulatory domain
  263. [ 15.053184] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
  264. [ 15.094800] vga16fb: initializing
  265. [ 15.094806] vga16fb: mapped to 0xffff8800000a0000
  266. [ 15.094987] fb0: VGA16 VGA frame buffer device
  267. [ 15.105974] sdhci: Secure Digital Host Controller Interface driver
  268. [ 15.105978] sdhci: Copyright(c) Pierre Ossman
  269. [ 15.106761] ricoh-mmc: Ricoh MMC Controller disabling driver
  270. [ 15.106765] ricoh-mmc: Copyright(c) Philip Langdale
  271. [ 15.106869] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
  272. [ 15.106887] ricoh-mmc: Controller is now disabled.
  273. [ 15.177299] cfg80211: World regulatory domain updated:
  274. [ 15.177304] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  275. [ 15.177308] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  276. [ 15.177312] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  277. [ 15.177315] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  278. [ 15.177318] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  279. [ 15.177322] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  280. [ 15.245016] EDAC MC: Ver: 2.1.0 Jul 28 2010
  281. [ 15.361863] EDAC amd64_edac: Ver: 3.2.0 Jul 28 2010
  282. [ 15.375196] acpi device:22: registered as cooling_device2
  283. [ 15.375397] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
  284. [ 15.375472] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
  285. [ 15.378052] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19)
  286. [ 15.378494] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
  287. [ 15.378512] sdhci-pci 0000:07:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, high) -> IRQ 7
  288. [ 15.380936] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
  289. [ 15.380954] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  290. [ 15.380956] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  291. [ 15.380958] (Note that use of the override may cause unknown side effects.)
  292. [ 15.380989] amd64_edac: probe of 0000:00:18.2 failed with error -22
  293. [ 15.385006] Registered led device: mmc0::
  294. [ 15.386081] mmc0: SDHCI controller on PCI [0000:07:05.1] using PIO
  295. [ 15.784191] type=1505 audit(1282789487.538:2): operation="profile_load" pid=679 name="/sbin/dhclient3"
  296. [ 15.784529] type=1505 audit(1282789487.538:3): operation="profile_load" pid=679 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  297. [ 15.784714] type=1505 audit(1282789487.538:4): operation="profile_load" pid=679 name="/usr/lib/connman/scripts/dhclient-script"
  298. [ 15.841145] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
  299. [ 15.903217] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
  300. [ 16.364021] nvidia: module license 'NVIDIA' taints kernel.
  301. [ 16.364027] Disabling lock debugging due to kernel taint
  302. [ 17.124507] nvidia 0000:00:05.0: power state changed by ACPI to D0
  303. [ 17.124552] nvidia 0000:00:05.0: power state changed by ACPI to D0
  304. [ 17.124991] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
  305. [ 17.124998] alloc irq_desc for 18 on node 0
  306. [ 17.125001] alloc kstat_irqs on node 0
  307. [ 17.125014] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18
  308. [ 17.125023] nvidia 0000:00:05.0: setting latency timer to 64
  309. [ 17.125029] vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
  310. [ 17.125490] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010
  311. [ 17.292292] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
  312. [ 17.532411] phy0: Selected rate control algorithm 'minstrel'
  313. [ 17.533305] Registered led device: b43-phy0::tx
  314. [ 17.533328] Registered led device: b43-phy0::rx
  315. [ 17.533352] Registered led device: b43-phy0::radio
  316. [ 17.533448] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
  317. [ 17.548297] Console: switching to colour frame buffer device 80x30
  318. [ 17.776387] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
  319. [ 17.776395] alloc irq_desc for 21 on node 0
  320. [ 17.776398] alloc kstat_irqs on node 0
  321. [ 17.776412] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21
  322. [ 17.776417] hda_intel: Disable MSI for Nvidia chipset
  323. [ 17.776466] HDA Intel 0000:00:10.1: setting latency timer to 64
  324. [ 18.598698] EXT4-fs (sda5): mounted filesystem with ordered data mode
  325. [ 20.970077] b43 ssb0:0: firmware: requesting b43/ucode5.fw
  326. [ 21.004072] b43 ssb0:0: firmware: requesting b43/pcm5.fw
  327. [ 21.078946] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
  328. [ 21.116642] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
  329. [ 21.170408] type=1505 audit(1282789492.927:5): operation="profile_load" pid=1002 name="/usr/share/gdm/guest-session/Xsession"
  330. [ 21.172909] type=1505 audit(1282789492.927:6): operation="profile_replace" pid=1009 name="/sbin/dhclient3"
  331. [ 21.173260] type=1505 audit(1282789492.927:7): operation="profile_replace" pid=1009 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  332. [ 21.173457] type=1505 audit(1282789492.927:8): operation="profile_replace" pid=1009 name="/usr/lib/connman/scripts/dhclient-script"
  333. [ 21.211680] type=1505 audit(1282789492.967:9): operation="profile_load" pid=1010 name="/usr/bin/evince"
  334. [ 21.216313] type=1505 audit(1282789492.967:10): operation="profile_load" pid=1010 name="/usr/bin/evince-previewer"
  335. [ 21.219079] type=1505 audit(1282789492.967:11): operation="profile_load" pid=1010 name="/usr/bin/evince-thumbnailer"
  336. [ 21.250071] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
  337. [ 21.251276] type=1505 audit(1282789493.007:12): operation="profile_load" pid=1013 name="/usr/bin/freshclam"
  338. [ 21.284896] type=1505 audit(1282789493.037:13): operation="profile_load" pid=1014 name="/usr/lib/cups/backend/cups-pdf"
  339. [ 21.285326] type=1505 audit(1282789493.037:14): operation="profile_load" pid=1014 name="/usr/sbin/cupsd"
  340. [ 21.440531] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  341. [ 21.443466] eth0: no link during initialization.
  342. [ 21.443978] ADDRCONF(NETDEV_UP): eth0: link is not ready
  343. [ 24.935272] ppdev: user-space parallel port driver
  344. [ 32.340242] wlan0: deauthenticating from 00:17:3f:7d:8d:a2 by local choice (reason=3)
  345. [ 32.340350] wlan0: direct probe to AP 00:17:3f:7d:8d:a2 (try 1)
  346. [ 32.342724] wlan0: direct probe responded
  347. [ 32.342731] wlan0: authenticate with AP 00:17:3f:7d:8d:a2 (try 1)
  348. [ 32.349773] wlan0: authenticated
  349. [ 32.349803] wlan0: associate with AP 00:17:3f:7d:8d:a2 (try 1)
  350. [ 32.352039] wlan0: RX AssocResp from 00:17:3f:7d:8d:a2 (capab=0x411 status=0 aid=1)
  351. [ 32.352043] wlan0: associated
  352. [ 32.352809] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  353. [ 42.820028] wlan0: no IPv6 routers present
  354. [ 86.510063] Clocksource tsc unstable (delta = -150068476 ns)
  355. [ 128.906264] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  356. [ 128.906280] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  357. [ 128.906292] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  358. [ 128.906314] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed c0 00 00 02 00
  359. [ 128.906334] end_request: I/O error, dev sr0, sector 14661376
  360. [ 128.906346] __ratelimit: 3 callbacks suppressed
  361. [ 128.906354] Buffer I/O error on device sr0, logical block 1832672
  362. [ 129.185064] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  363. [ 129.185075] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  364. [ 129.185085] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  365. [ 129.185101] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed c0 00 00 02 00
  366. [ 129.185122] end_request: I/O error, dev sr0, sector 14661376
  367. [ 129.185132] Buffer I/O error on device sr0, logical block 1832672
  368. [ 130.346364] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  369. [ 130.346380] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  370. [ 130.346392] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  371. [ 130.346413] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed ae 00 00 02 00
  372. [ 130.346433] end_request: I/O error, dev sr0, sector 14661304
  373. [ 130.346446] Buffer I/O error on device sr0, logical block 1832663
  374. [ 130.581884] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  375. [ 130.581892] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  376. [ 130.581898] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  377. [ 130.581909] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed ae 00 00 02 00
  378. [ 130.581919] end_request: I/O error, dev sr0, sector 14661304
  379. [ 130.581926] Buffer I/O error on device sr0, logical block 1832663
  380. [ 130.810247] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  381. [ 130.810262] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  382. [ 130.810273] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  383. [ 130.810294] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed e0 00 00 02 00
  384. [ 130.810314] end_request: I/O error, dev sr0, sector 14661504
  385. [ 130.810326] Buffer I/O error on device sr0, logical block 1832688
  386. [ 131.045335] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  387. [ 131.045349] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  388. [ 131.045359] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  389. [ 131.045378] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed e0 00 00 02 00
  390. [ 131.045398] end_request: I/O error, dev sr0, sector 14661504
  391. [ 131.045410] Buffer I/O error on device sr0, logical block 1832688
  392. [ 132.897132] UDF-fs: Partition marked readonly; forcing readonly mount
  393. [ 132.969049] UDF-fs INFO UDF: Mounting volume 'SPIDERWICK_AC_D1_169', timestamp 2008/05/08 02:03 (1e5c)
  394. [ 246.621103] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  395. [ 246.621111] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  396. [ 246.621117] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  397. [ 246.621128] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed c0 00 00 02 00
  398. [ 246.621138] end_request: I/O error, dev sr0, sector 14661376
  399. [ 246.621145] Buffer I/O error on device sr0, logical block 1832672
  400. [ 247.488783] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  401. [ 247.488791] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  402. [ 247.488797] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  403. [ 247.488808] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed c0 00 00 02 00
  404. [ 247.488818] end_request: I/O error, dev sr0, sector 14661376
  405. [ 247.488825] Buffer I/O error on device sr0, logical block 1832672
  406. [ 249.731402] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  407. [ 249.731419] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  408. [ 249.731431] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  409. [ 249.731454] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed ae 00 00 02 00
  410. [ 249.731475] end_request: I/O error, dev sr0, sector 14661304
  411. [ 249.731488] Buffer I/O error on device sr0, logical block 1832663
  412. [ 249.966492] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  413. [ 249.966500] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  414. [ 249.966506] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  415. [ 249.966518] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed ae 00 00 02 00
  416. [ 249.966528] end_request: I/O error, dev sr0, sector 14661304
  417. [ 249.966536] Buffer I/O error on device sr0, logical block 1832663
  418. [ 250.662913] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  419. [ 250.662921] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  420. [ 250.662926] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  421. [ 250.662937] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed e0 00 00 02 00
  422. [ 250.662946] end_request: I/O error, dev sr0, sector 14661504
  423. [ 250.662953] Buffer I/O error on device sr0, logical block 1832688
  424. [ 251.092920] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  425. [ 251.092928] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
  426. [ 251.092933] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  427. [ 251.092944] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 37 ed e0 00 00 02 00
  428. [ 251.092953] end_request: I/O error, dev sr0, sector 14661504
  429. [ 251.092960] Buffer I/O error on device sr0, logical block 1832688
  430. [ 253.590830] UDF-fs: Partition marked readonly; forcing readonly mount
  431. [ 253.662383] UDF-fs INFO UDF: Mounting volume 'SPIDERWICK_AC_D1_169', timestamp 2008/05/08 02:03 (1e5c)
  432. leadfingers@leadfingers-laptop:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!