API tools faq
paste
Guest User

Untitled

a guest
Sep 7th, 2014
200
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.19 KB | None | 0 0
raw download clone embed print report
  1. trisquel@trisquel:~$ sudo smartctl -a /dev/sda
  2. smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
  3. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Maxtor DiamondMax 22
  7. Device Model: MAXTOR STM3500320AS
  8. Serial Number: 5QM0Z9CT
  9. Firmware Version: MX15
  10. User Capacity: 500,106,780,160 bytes
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: 8
  13. ATA Standard is: ATA-8-ACS revision 4
  14. Local Time is: Sun Sep 7 22:10:50 2014 CEST
  15.  
  16. ==> WARNING: There are known problems with these drives,
  17. AND THIS FIRMWARE VERSION IS AFFECTED,
  18. see the following Seagate web pages:
  19. http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931
  20. http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207969
  21.  
  22. SMART support is: Available - device has SMART capability.
  23. SMART support is: Enabled
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27. See vendor-specific Attribute list for marginal Attributes.
  28.  
  29. General SMART Values:
  30. Offline data collection status: (0x82) Offline data collection activity
  31. was completed without error.
  32. Auto Offline Data Collection: Enabled.
  33. Self-test execution status: ( 0) The previous self-test routine completed
  34. without error or no self-test has ever
  35. been run.
  36. Total time to complete Offline
  37. data collection: ( 625) seconds.
  38. Offline data collection
  39. capabilities: (0x7b) SMART execute Offline immediate.
  40. Auto Offline data collection on/off support.
  41. Suspend Offline collection upon new
  42. command.
  43. Offline surface scan supported.
  44. Self-test supported.
  45. Conveyance Self-test supported.
  46. Selective Self-test supported.
  47. SMART capabilities: (0x0003) Saves SMART data before entering
  48. power-saving mode.
  49. Supports SMART auto save timer.
  50. Error logging capability: (0x01) Error logging supported.
  51. General Purpose Logging supported.
  52. Short self-test routine
  53. recommended polling time: ( 1) minutes.
  54. Extended self-test routine
  55. recommended polling time: ( 111) minutes.
  56. Conveyance self-test routine
  57. recommended polling time: ( 2) minutes.
  58. SCT capabilities: (0x103b) SCT Status supported.
  59. SCT Error Recovery Control supported.
  60. SCT Feature Control supported.
  61. SCT Data Table supported.
  62.  
  63. SMART Attributes Data Structure revision number: 10
  64. Vendor Specific SMART Attributes with Thresholds:
  65. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  66. 1 Raw_Read_Error_Rate 0x000f 088 087 006 Pre-fail Always - 210621149
  67. 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0
  68. 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2129
  69. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 2042
  70. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 21561211994
  71. 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5773
  72. 10 Spin_Retry_Count 0x0013 100 099 097 Pre-fail Always - 349
  73. 12 Power_Cycle_Count 0x0032 098 037 020 Old_age Always - 2974
  74. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  75. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 2460
  76. 188 Command_Timeout 0x0032 100 094 000 Old_age Always - 12885165065
  77. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  78. 190 Airflow_Temperature_Cel 0x0022 057 038 045 Old_age Always In_the_past 43 (40 145 43 42)
  79. 194 Temperature_Celsius 0x0022 043 062 000 Old_age Always - 43 (0 14 0 0)
  80. 195 Hardware_ECC_Recovered 0x001a 038 004 000 Old_age Always - 210621149
  81. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
  82. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 5
  83. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 7
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 2769 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 2769 occurred at disk power-on lifetime: 5772 hours (240 days + 12 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. a1 00 00 00 00 00 a0 02 00:18:53.730 IDENTIFY PACKET DEVICE
  113. ec 00 00 00 00 00 a0 02 00:18:53.722 IDENTIFY DEVICE
  114. 00 00 00 00 00 00 00 04 00:18:53.566 NOP [Abort queued commands]
  115. a1 00 00 00 00 00 a0 02 00:18:48.262 IDENTIFY PACKET DEVICE
  116. ec 00 00 00 00 00 a0 02 00:18:48.254 IDENTIFY DEVICE
  117.  
  118. Error 2768 occurred at disk power-on lifetime: 5772 hours (240 days + 12 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 04 71 04 9d 00 32 e0
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. ec 00 00 00 00 00 a0 02 00:18:53.722 IDENTIFY DEVICE
  130. 00 00 00 00 00 00 00 04 00:18:53.566 NOP [Abort queued commands]
  131. a1 00 00 00 00 00 a0 02 00:18:48.262 IDENTIFY PACKET DEVICE
  132. ec 00 00 00 00 00 a0 02 00:18:48.254 IDENTIFY DEVICE
  133. 00 00 00 00 00 00 00 04 00:18:48.098 NOP [Abort queued commands]
  134.  
  135. Error 2767 occurred at disk power-on lifetime: 5772 hours (240 days + 12 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. a1 00 00 00 00 00 a0 02 00:18:48.262 IDENTIFY PACKET DEVICE
  147. ec 00 00 00 00 00 a0 02 00:18:48.254 IDENTIFY DEVICE
  148. 00 00 00 00 00 00 00 04 00:18:48.098 NOP [Abort queued commands]
  149. a1 00 00 00 00 00 a0 02 00:18:42.794 IDENTIFY PACKET DEVICE
  150. ec 00 00 00 00 00 a0 02 00:18:42.786 IDENTIFY DEVICE
  151.  
  152. Error 2766 occurred at disk power-on lifetime: 5772 hours (240 days + 12 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 04 71 04 9d 00 32 e0
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. ec 00 00 00 00 00 a0 02 00:18:48.254 IDENTIFY DEVICE
  164. 00 00 00 00 00 00 00 04 00:18:48.098 NOP [Abort queued commands]
  165. a1 00 00 00 00 00 a0 02 00:18:42.794 IDENTIFY PACKET DEVICE
  166. ec 00 00 00 00 00 a0 02 00:18:42.786 IDENTIFY DEVICE
  167. 00 00 00 00 00 00 00 04 00:18:42.630 NOP [Abort queued commands]
  168.  
  169. Error 2765 occurred at disk power-on lifetime: 5772 hours (240 days + 12 hours)
  170. When the command that caused the error occurred, the device was active or idle.
  171.  
  172. After command completion occurred, registers were:
  173. ER ST SC SN CL CH DH
  174. -- -- -- -- -- -- --
  175. 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
  176.  
  177. Commands leading to the command that caused the error were:
  178. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  179. -- -- -- -- -- -- -- -- ---------------- --------------------
  180. a1 00 00 00 00 00 a0 02 00:18:42.794 IDENTIFY PACKET DEVICE
  181. ec 00 00 00 00 00 a0 02 00:18:42.786 IDENTIFY DEVICE
  182. 00 00 00 00 00 00 00 04 00:18:42.630 NOP [Abort queued commands]
  183. 60 00 00 ff ff ff 4f 00 00:18:38.437 READ FPDMA QUEUED
  184. 60 00 18 ff ff ff 4f 00 00:18:38.436 READ FPDMA QUEUED
  185.  
  186. SMART Self-test log structure revision number 1
  187. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  188. # 1 Short offline Completed: read failure 90% 5772 682852481
  189. # 2 Short offline Completed without error 00% 2218 -
  190. # 3 Short offline Completed without error 00% 2218 -
  191. # 4 Short offline Completed without error 00% 2217 -
  192. # 5 Short offline Completed without error 00% 2217 -
  193. # 6 Short offline Completed without error 00% 2217 -
  194. # 7 Extended offline Interrupted (host reset) 00% 395 -
  195.  
  196. SMART Selective self-test log data structure revision number 1
  197. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  198. 1 0 0 Not_testing
  199. 2 0 0 Not_testing
  200. 3 0 0 Not_testing
  201. 4 0 0 Not_testing
  202. 5 0 0 Not_testing
  203. Selective self-test flags (0x0):
  204. After scanning selected spans, do NOT read-scan remainder of disk.
  205. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!