API tools faq
paste
Guest User

Udoo Quad DTS

a guest
Jun 16th, 2014
118
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C 7.31 KB | None | 0 0
raw download clone embed print report
  1. /*
  2.  * Copyright 2013 Freescale Semiconductor, Inc.
  3.  *
  4.  * Author: Fabio Estevam <[email protected]>
  5.  *        
  6.  * Copyright (C) 2014 Jasbir
  7.  *
  8.  * This program is free software; you can redistribute it and/or modify
  9.  * it under the terms of the GNU General Public License version 2 as
  10.  * published by the Free Software Foundation.
  11.  *
  12.  */
  13.  
  14. /dts-v1/;
  15. #include "imx6q.dtsi"
  16.  
  17. / {
  18.     model = "Udoo i.MX6 Quad Board";
  19.     compatible = "udoo,imx6q-udoo", "fsl,imx6q";
  20.  
  21.     aliases {
  22.         mxcfb0 = &mxcfb1;
  23.     };
  24.  
  25.     memory {
  26.         reg = <0x10000000 0x40000000>;
  27.     };
  28.  
  29.     regulators {
  30.         compatible = "simple-bus";
  31.  
  32.         reg_usb_h1_vbus: usb_h1_vbus {
  33.             compatible = "regulator-fixed";
  34.             regulator-name = "usb_h1_vbus";
  35.             regulator-min-microvolt = <5000000>;
  36.             regulator-max-microvolt = <5000000>;
  37.             enable-active-high;
  38.             startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
  39.             gpio = <&gpio7 12 0>;
  40.         };
  41.     };
  42.  
  43.     mxcfb1: fb@0 {
  44.         compatible = "fsl,mxc_sdc_fb";
  45.         disp_dev = "hdmi";
  46.         interface_pix_fmt = "RGB24";
  47.         mode_str ="";
  48.         default_bpp = <32>;
  49.         int_clk = <0>;
  50.         late_init = <0>;
  51.         status = "disabled";
  52.     };
  53.  
  54.     sound-hdmi {
  55.         compatible = "fsl,imx6q-audio-hdmi",
  56.                  "fsl,imx-audio-hdmi";
  57.         model = "imx-audio-hdmi";
  58.         hdmi-controller = <&hdmi_audio>;
  59.     };
  60.  
  61.     v4l2_out {
  62.         compatible = "fsl,mxc_v4l2_output";
  63.         status = "okay";
  64.     };
  65.  
  66.     poweroff {
  67.         compatible = "udoo,poweroff";
  68.         sam3x_rst_gpio = <&gpio1 0 0>;
  69.         pwr_5v_gpio = <&gpio2 4 0>;
  70.     };
  71.  
  72. };
  73.  
  74. &hdmi_audio {
  75.     status = "okay";
  76. };
  77.  
  78.  
  79. &hdmi_core {
  80.     ipu_id = <0>;
  81.     disp_id = <0>;
  82.     status = "okay";
  83. };
  84.  
  85.  
  86. &hdmi_video {
  87.     fsl,phy_reg_vlev = <0x0294>;
  88.     fsl,phy_reg_cksymtx = <0x800d>;
  89.     status = "okay";
  90. };
  91.  
  92. &i2c2 {
  93.     clock-frequency = <100000>;
  94.     pinctrl-names = "default";
  95.     pinctrl-0 = <&pinctrl_i2c1_1>;
  96.     status = "okay";
  97. };
  98.  
  99. &i2c2 {
  100.     clock-frequency = <100000>;
  101.     pinctrl-names = "default";
  102.     pinctrl-0 = <&pinctrl_i2c2_2>;
  103.     status = "okay";
  104.  
  105.     hdmi: edid@50 {
  106.         compatible = "fsl,imx6-hdmi-i2c";
  107.         reg = <0x50>;
  108.     };
  109. };
  110.  
  111. &i2c2 {
  112.     clock-frequency = <100000>;
  113.     pinctrl-names = "default";
  114.     pinctrl-0 = <&pinctrl_i2c3_1>;
  115.     status = "okay";
  116. };
  117.  
  118. &fec {
  119.     pinctrl-names = "default";
  120.     pinctrl-0 = <&pinctrl_enet>;
  121.     phy-mode = "rgmii";
  122.     status = "okay";
  123. };
  124.  
  125. &hdmi {
  126.     ddc-i2c-bus = <&i2c2>;
  127.     status = "okay";
  128. };
  129.  
  130. &i2c2 {
  131.     clock-frequency = <100000>;
  132.     pinctrl-names = "default";
  133.     pinctrl-0 = <&pinctrl_i2c2>;
  134.     status = "okay";
  135. };
  136.  
  137. &hdmi {
  138.     ddc-i2c-bus = <&i2c2>;
  139.     status = "okay";
  140. };
  141.  
  142. &i2c2 {
  143.     clock-frequency = <100000>;
  144.     pinctrl-names = "default";
  145.     pinctrl-0 = <&pinctrl_i2c2>;
  146.     status = "okay";
  147. };
  148.  
  149. &hdmi {
  150.     ddc-i2c-bus = <&i2c2>;
  151.     status = "okay";
  152. };
  153.  
  154. &i2c2 {
  155.     clock-frequency = <100000>;
  156.     pinctrl-names = "default";
  157.     pinctrl-0 = <&pinctrl_i2c2>;
  158.     status = "okay";
  159. };
  160.  
  161. &iomuxc {
  162.  
  163.     pinctrl-names = "default";
  164.     pinctrl-0 = <&pinctrl_hog>;
  165.  
  166.     imx6q-udoo {
  167.         pinctrl_hog: hoggrp {
  168.             fsl,pins = <
  169.                 MX6QDL_PAD_NANDF_D4__GPIO2_IO04   0x80000000  /* 5v enable      */
  170.                 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11  0x80000000  /* Vtt suspend    */
  171.                 MX6QDL_PAD_SD2_DAT0__GPIO1_IO15   0x80000000  /* touch reset    */
  172.                 MX6QDL_PAD_EIM_EB2__GPIO2_IO30    0x80000000  /* audio reset    */
  173.                 MX6QDL_PAD_EIM_EB3__GPIO2_IO31    0x80000000  /* ethernet power */
  174.  
  175.                 MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000  /* usb hub reset  */
  176.                 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2   0x130b0     /* clk usb hub    */
  177.                 MX6QDL_PAD_EIM_WAIT__GPIO5_IO00   0xb0b1      /* usb otg select */
  178.  
  179.                 MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x80000000  /* sdcard power   */
  180.                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00   0x80000000  /* sd card detect */
  181.                 MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x80000000  /* select dbg uart*/
  182.                 MX6QDL_PAD_GPIO_0__GPIO1_IO00     0x80000000  /* SAM3X reset    */
  183.                 MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x30b1      /* SAM3X erase    */
  184.                 MX6QDL_PAD_GPIO_16__GPIO7_IO11    0xb0b1      /* SAM3X vbus_en  */
  185.                 MX6QDL_PAD_SD4_DAT7__GPIO2_IO15   0x80000000  /* SAM3X usb host */
  186.                 MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000  /* panel on       */
  187.                 MX6QDL_PAD_GPIO_4__GPIO1_IO04     0x80000000  /* backlight on   */
  188.                 MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x80000000  /* camera reset   */
  189.                 MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x80000000  /* camera enable  */
  190.                 MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x80000000 /* input mon serial*/
  191.                 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x80000000  /* input mon serial*/
  192.                 MX6QDL_PAD_EIM_A19__GPIO2_IO19    0x80000000  /* writeprotect spi*/
  193.                 MX6QDL_PAD_GPIO_3__GPIO1_IO03     0x30b1      /* arduino pinout  */
  194.  
  195.                 MX6QDL_PAD_DI0_PIN2__AUD6_TXD     0x80000000  /* audio audmux */
  196.                 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS    0x80000000  /* audio audmux */
  197.                 MX6QDL_PAD_DI0_PIN4__AUD6_RXD     0x80000000  /* audio audmux */
  198.                 MX6QDL_PAD_DI0_PIN15__AUD6_TXC    0x80000000  /* audio audmux */
  199.             >;
  200.         };
  201.  
  202.         pinctrl_enet: enetgrp {
  203.             fsl,pins = <               
  204.                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC     0x1b0b0
  205.                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0     0x1b0b0
  206.                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1     0x1b0b0
  207.                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2     0x1b0b0
  208.                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3     0x1b0b0
  209.                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
  210.                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC     0x1b0b0
  211.                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0     0x1b0b0
  212.                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1     0x1b0b0
  213.                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2     0x1b0b0
  214.                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3     0x1b0b0
  215.                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
  216.                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
  217.                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO     0x1b0b0
  218.                 MX6QDL_PAD_ENET_MDC__ENET_MDC       0x1b0b0
  219.                 MX6QDL_PAD_EIM_D23__GPIO3_IO23      0x80000000 /* reset */
  220.             >;
  221.         };
  222.  
  223.         pinctrl_i2c2: i2c2grp {
  224.             fsl,pins = <
  225.                 MX6QDL_PAD_KEY_COL3__I2C2_SCL       0x4001b8b1
  226.                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA       0x4001b8b1
  227.             >;
  228.         };
  229.  
  230.         pinctrl_i2c2: i2c2grp {
  231.             fsl,pins = <
  232.                 MX6QDL_PAD_KEY_COL3__I2C2_SCL       0x4001b8b1
  233.                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA       0x4001b8b1
  234.             >;
  235.         };
  236.  
  237.         pinctrl_i2c2: i2c2grp {
  238.             fsl,pins = <
  239.                 MX6QDL_PAD_KEY_COL3__I2C2_SCL       0x4001b8b1
  240.                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA       0x4001b8b1
  241.             >;
  242.         };
  243.  
  244.         pinctrl_uart2: uart2grp {
  245.             fsl,pins = <
  246.                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA   0x1b0b1
  247.                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA   0x1b0b1
  248.             >;
  249.         };
  250.  
  251.         pinctrl_uart4: uart4grp {
  252.             fsl,pins = <               
  253.                 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
  254.                 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
  255.             >;
  256.         };
  257.  
  258.         pinctrl_usdhc3: usdhc3grp {
  259.             fsl,pins = <
  260.                 MX6QDL_PAD_SD3_CMD__SD3_CMD         0x17059
  261.                 MX6QDL_PAD_SD3_CLK__SD3_CLK         0x10059
  262.                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0      0x17059
  263.                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1      0x17059
  264.                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2      0x17059
  265.                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3      0x17059
  266.             >;
  267.         };
  268.  
  269.     };
  270. };
  271.  
  272. &sata {
  273.     status = "okay";
  274. };
  275.  
  276. &uart2 {
  277.     pinctrl-names = "default";
  278.     pinctrl-0 = <&pinctrl_uart2>;
  279.     status = "okay";
  280. };
  281.  
  282. &uart4 { /* sam3x port */
  283.     pinctrl-names = "default";
  284.     pinctrl-0 = <&pinctrl_uart4>;
  285.     status = "okay";
  286. };
  287.  
  288. &usdhc3 {
  289.     pinctrl-names = "default";
  290.     pinctrl-0 = <&pinctrl_usdhc3>;
  291.     non-removable;
  292.     keep-power-in-suspend;
  293.     status = "okay";
  294. };
  295.  
  296. &usbotg {
  297.     status = "disabled";
  298. };
  299.  
  300. &usbh1 {
  301.     vbus-supply = <&reg_usb_h1_vbus>;
  302.     clocks = <&clks 201>;
  303.     clock-names = "phy";
  304.     status = "okay";
  305. };
  306.  
  307. &mxcfb1 {
  308.     status = "okay";
  309. };
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!