API tools faq
paste
Advertisement
Hades94

SMARTCTL LOG

Hades94
Jun 23rd, 2014
262
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.52 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
  2. Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.12
  6. Device Model: ST3320418AS
  7. Serial Number: 9VM05VE9
  8. LU WWN Device Id: 5 000c50 014a670fd
  9. Firmware Version: CC49
  10. User Capacity: 320,072,933,376 bytes [320 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 7200 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 2.6, 3.0 Gb/s
  16. Local Time is: Thu Dec 13 21:09:15 2012 UTC
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: FAILED!
  22. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  23. See vendor-specific Attribute list for failed Attributes.
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 73) The previous self-test completed having
  30. a test element that failed and the test
  31. element that failed is not known.
  32. Total time to complete Offline
  33. data collection: ( 625) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 64) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x103f) SCT Status supported.
  55. SCT Error Recovery Control supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x000f 109 099 006 Pre-fail Always - 91000505
  63. 3 Spin_Up_Time 0x0003 099 097 000 Pre-fail Always - 0
  64. 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4529
  65. 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 4809
  66. 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 169635501
  67. 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8377
  68. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 096 037 020 Old_age Always - 4542
  70. 183 Runtime_Bad_Block 0x0000 100 100 000 Old_age Offline - 0
  71. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  72. 187 Reported_Uncorrect 0x0032 071 071 000 Old_age Always - 29
  73. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 8590065751
  74. 189 High_Fly_Writes 0x003a 093 093 000 Old_age Always - 7
  75. 190 Airflow_Temperature_Cel 0x0022 072 053 045 Old_age Always - 28 (Min/Max 26/28)
  76. 194 Temperature_Celsius 0x0022 028 047 000 Old_age Always - 28 (0 12 0 0 0)
  77. 195 Hardware_ECC_Recovered 0x001a 037 032 000 Old_age Always - 91000505
  78. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  79. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 77253576772464
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 160104175
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3486478044
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 41 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 41 occurred at disk power-on lifetime: 8355 hours (348 days + 3 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 04 51 00 00 00 00 00 Error: ABRT
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. b0 d4 00 81 4f c2 a0 00 00:00:53.982 SMART EXECUTE OFF-LINE IMMEDIATE
  113. b0 d0 00 00 4f c2 a0 00 00:00:53.754 SMART READ DATA
  114. b0 d0 00 00 4f c2 a0 00 00:00:52.766 SMART READ DATA
  115. b0 da 00 00 4f c2 a0 00 00:00:39.512 SMART RETURN STATUS
  116. b0 d0 00 00 4f c2 a0 00 00:00:36.808 SMART READ DATA
  117.  
  118. Error 40 occurred at disk power-on lifetime: 8110 hours (337 days + 22 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 51 00 66 bb 61 00 Error: UNC at LBA = 0x0061bb66 = 6404966
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. 25 00 08 60 bb 61 e0 00 00:27:02.239 READ DMA EXT
  130. 35 00 40 c0 e0 5d e0 00 00:27:02.238 WRITE DMA EXT
  131. 35 00 08 80 19 01 e0 00 00:27:02.238 WRITE DMA EXT
  132. 35 00 20 e0 99 1e e6 00 00:27:02.238 WRITE DMA EXT
  133. 35 00 20 c0 99 1e e6 00 00:27:02.237 WRITE DMA EXT
  134.  
  135. Error 39 occurred at disk power-on lifetime: 8110 hours (337 days + 22 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 51 00 66 bb 61 00 Error: UNC at LBA = 0x0061bb66 = 6404966
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. 25 00 20 60 bb 61 e0 00 00:26:59.371 READ DMA EXT
  147. 35 00 40 80 e0 5d e0 00 00:26:59.370 WRITE DMA EXT
  148. 25 00 20 80 0d c6 e2 00 00:26:59.360 READ DMA EXT
  149. 25 00 20 c0 9f b8 e2 00 00:26:59.354 READ DMA EXT
  150. 25 00 70 00 19 54 e1 00 00:26:59.342 READ DMA EXT
  151.  
  152. Error 38 occurred at disk power-on lifetime: 7549 hours (314 days + 13 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 51 00 66 bb 61 00 Error: UNC at LBA = 0x0061bb66 = 6404966
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. 25 00 08 60 bb 61 e0 00 00:27:35.998 READ DMA EXT
  164. 35 00 08 80 26 5c e0 00 00:27:35.952 WRITE DMA EXT
  165. 35 00 08 98 26 5c e0 00 00:27:35.952 WRITE DMA EXT
  166. 25 00 20 60 c3 61 e0 00 00:27:35.952 READ DMA EXT
  167. 35 00 48 20 68 5d e0 00 00:27:35.951 WRITE DMA EXT
  168.  
  169. Error 37 occurred at disk power-on lifetime: 7549 hours (314 days + 13 hours)
  170. When the command that caused the error occurred, the device was active or idle.
  171.  
  172. After command completion occurred, registers were:
  173. ER ST SC SN CL CH DH
  174. -- -- -- -- -- -- --
  175. 40 51 00 66 bb 61 00 Error: UNC at LBA = 0x0061bb66 = 6404966
  176.  
  177. Commands leading to the command that caused the error were:
  178. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  179. -- -- -- -- -- -- -- -- ---------------- --------------------
  180. 25 00 20 60 bb 61 e0 00 00:27:33.267 READ DMA EXT
  181. 35 00 10 60 55 27 e3 00 00:27:33.266 WRITE DMA EXT
  182. 25 00 10 60 c3 61 e0 00 00:27:33.266 READ DMA EXT
  183. 35 00 20 e0 03 1b e6 00 00:27:33.265 WRITE DMA EXT
  184. 35 00 20 40 55 27 e3 00 00:27:33.265 WRITE DMA EXT
  185.  
  186. SMART Self-test log structure revision number 1
  187. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  188. # 1 Extended offline Completed: unknown failure 90% 8377 0
  189. # 2 Short offline Completed: unknown failure 90% 8374 0
  190. # 3 Short offline Completed: unknown failure 90% 8374 0
  191. # 4 Short offline Completed: unknown failure 90% 8371 0
  192. # 5 Short offline Completed: unknown failure 90% 8371 0
  193. # 6 Short captive Completed: unknown failure 90% 8355 0
  194. # 7 Short offline Completed without error 00% 3855 -
  195. # 8 Short captive Completed without error 00% 3077 -
  196. # 9 Short captive Interrupted (host reset) 80% 12 -
  197.  
  198. SMART Selective self-test log data structure revision number 1
  199. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  200. 1 0 0 Not_testing
  201. 2 0 0 Not_testing
  202. 3 0 0 Not_testing
  203. 4 0 0 Not_testing
  204. 5 0 0 Not_testing
  205. Selective self-test flags (0x0):
  206. After scanning selected spans, do NOT read-scan remainder of disk.
  207. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!