Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Starting kernel at 0x32000000...
- [ 0.847292] S5PV210: Initializing architecture
- [ 0.852479] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
- [ 0.861985] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
- [ 0.871476] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
- [ 0.881001] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
- [ 0.890719] print_constraints: pd_audio_supply: 5000 mV normal
- [ 0.897442] print_constraints: pd_cam_supply: 5000 mV normal
- [ 0.903913] print_constraints: pd_tv_supply: 5000 mV normal
- [ 0.910331] print_constraints: pd_lcd_supply: 5000 mV normal
- [ 0.916795] print_constraints: pd_g3d_supply: 5000 mV normal
- [ 0.923316] print_constraints: pd_mfc_supply: 5000 mV normal
- [ 0.936180] bio: create slab <bio-0> at 0
- [ 0.941350] SCSI subsystem initialized
- [ 0.945618] usbcore: registered new interface driver usbfs
- [ 0.951766] usbcore: registered new interface driver hub
- [ 0.957803] usbcore: registered new device driver usb
- [ 0.963673] i2c-gpio i2c-gpio.4: using pins 248 (SDA) and 247 (SCL)
- [ 0.970776] i2c-gpio i2c-gpio.5: using pins 42 (SDA) and 43 (SCL)
- [ 0.977730] max8998 6-0066: No interrupt base specified, no interrupts
- [ 0.986661] i2:10, buck2_idx:0
- [ 0.991355] print_constraints: VALIVE_1.2V: 1200 mV
- [ 0.997463] print_constraints: VUSB_1.1V: 1100 mV
- [ 1.003306] print_constraints: VADC_3.3V: 3300 mV
- [ 1.009230] print_constraints: CAM_SENSOR_CORE_1.8V: 1800 mV
- [ 1.016163] print_constraints: VLCD_1.8V: 1800 mV
- [ 1.022008] print_constraints: VUSB_3.3V: 3300 mV
- [ 1.028362] print_constraints: VCC_2.8V_PDA: 2800 mV
- [ 1.034509] print_constraints: CAM_AF_3.0V: 3000 mV
- [ 1.040616] print_constraints: CAM_SENSOR_CORE_1.2V: 1200 mV
- [ 1.047546] print_constraints: VGA_VDDIO_2.8V: 2800 mV
- [ 1.053951] print_constraints: VGA_DVDD_1.8V: 1800 mV
- [ 1.060200] print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
- [ 1.066905] print_constraints: VCC_3.0V_LCD: 3000 mV
- [ 1.072861] print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
- [ 1.080351] print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
- [ 1.087776] print_constraints: VCC_1.8V: 1800 mV
- [ 1.093407] print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
- [ 1.099586] print_constraints: ESAFEOUT2:
- [ 1.104318] i2c i2c-6: Failed to register i2c client rtc_max8998 at 0x06 (-16)
- [ 1.112354] i2c i2c-6: Can't create device at 0x06
- [ 1.117703] i2c-gpio i2c-gpio.6: using pins 204 (SDA) and 203 (SCL)
- [ 1.124796] i2c-gpio i2c-gpio.9: using pins 237 (SDA) and 235 (SCL)
- [ 1.131953] i2c-gpio i2c-gpio.11: using pins 202 (SDA) and 201 (SCL)
- [ 1.139427] print_constraints: VDDA & SDRAM & WIMAX_USB & RFC1C4_1.8V: 1800 mV
- [ 1.147897] print_constraints: WIMAX_2.9V: 2900 mV
- [ 1.153577] print_constraints: TOUCH_KEY_3.0V: 3000 mV
- [ 1.159698] print_constraints: VCC_MOTOR_3.0V: 3000 mV
- [ 1.165768] print_constraints: WIMAX_SDIO_3.0V: 3000 mV
- [ 1.172001] print_constraints: VDD_RF & IO_1.8V: 1800 mV
- [ 1.180569] max8893 12-003e: Maxim 8893 regulator driver loaded
- [ 1.187198] i2c-gpio i2c-gpio.12: using pins 25 (SDA) and 27 (SCL)
- [ 1.194178] i2c-gpio i2c-gpio.10: using pins 120 (SDA) and 122 (SCL)
- [ 1.201493] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 1.207738] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 1.213938] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
- [ 1.220145] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 1.227646] Bluetooth: Core ver 2.16
- [ 1.231615] NET: Registered protocol family 31
- [ 1.236574] Bluetooth: HCI device and connection manager initialized
- [ 1.243622] Bluetooth: HCI socket layer initialized
- [ 1.249070] Bluetooth: L2CAP socket layer initialized
- [ 1.254658] Bluetooth: SCO socket layer initialized
- [ 1.260499] Switching to clocksource clock_source_systimer
- [ 1.266678] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.277273] Switched to NOHz mode on CPU #0
- [ 1.290975] NET: Registered protocol family 2
- [ 1.296005] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 1.304379] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 1.312680] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- [ 1.320140] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.327445] TCP reno registered
- [ 1.330883] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.337362] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.344640] NET: Registered protocol family 1
- [ 1.351463] PMU: registered new PMU device of type 0
- [ 1.357438] clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
- [ 1.523868] wake enabled for irq 36
- [ 1.527801] wake disabled for irq 36
- [ 1.531958] S5PV210 ADC driver, (c) 2010 Samsung Electronics
- [ 1.538630] Loaded driver for PL330 DMAC-0 s3c-pl330
- [ 1.544133] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
- [ 1.551033] Loaded driver for PL330 DMAC-1 s3c-pl330
- [ 1.556525] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 1.563409] Loaded driver for PL330 DMAC-2 s3c-pl330
- [ 1.568906] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 1.576525] ashmem: initialized
- [ 1.587825] ROMFS MTD (C) 2007 Red Hat, Inc.
- [ 1.592708] fuse init (API version 7.16)
- [ 1.597520] yaffs: yaffs built Aug 31 2013 18:14:26 Installing.
- [ 1.604119] msgmni has been set to 735
- [ 1.609391] io scheduler noop registered
- [ 1.613812] io scheduler deadline registered
- [ 1.618563] io scheduler row registered (default)
- [ 1.623882] io scheduler cfq registered
- [ 1.628104] io scheduler sio registered
- [ 1.633109] s3cfb s3cfb: vsync interrupt is on
- [ 1.638086] s3cfb s3cfb: video interrupt is on
- [ 1.642989] MDNIE INIT ..........
- [ 1.646716] S3C MDNIE Driver, (c) 2010 Samsung Electronics
- [ 1.652865] MDNIE INIT SUCCESS Addr : 0xe8034000
- [ 1.658056] IELCD INIT ..........
- [ 1.661845] S3C IELCD Driver, (c) 2010 Samsung Electronics
- [ 1.667925] IELCD INIT SUCCESS Addr : 0xe8040000
- [ 1.673131] s3cfb s3cfb: pixclock: 39019
- [ 1.677528] s3cfb s3cfb: pixclock: 39019
- [ 1.681846] s3cfb s3cfb: pixclock: 39019
- [ 1.686661] s3cfb s3cfb: [fb2] dma: 0x50065000, cpu: 0xe9000000, size: 0x00a41000
- [ 1.695056] s3cfb s3cfb: pixclock: 39019
- [ 1.699381] s3cfb s3cfb: pixclock: 39019
- [ 1.703929] s3cfb s3cfb: [fb2] check_var
- [ 1.708255] s3cfb s3cfb: [fb2] set_par
- [ 1.712378] s3cfb s3cfb: [fb2] data path: dma
- [ 1.717245] s3cfb s3cfb: [fb2] bpp mode: A8-R8-G8-B8
- [ 1.722730] s3cfb s3cfb: [fb2] offset: (0, 0, 479, 799)
- [ 1.728576] s3cfb s3cfb: [fb2] resolution: 480 x 800
- [ 1.734065] s3cfb s3cfb: [fb2] start_addr: 0x50065000, end_addr: 0x501dc000
- [ 1.741860] s3cfb s3cfb: [fb2] alpha mode: pixel blending
- [ 1.747837] s3cfb s3cfb: [fb2] chroma key: 0x00000000, disabled
- [ 1.758798] FIMD src sclk = 166750000
- [ 1.762871] s3cfb s3cfb: parent clock: 166750000, vclk: 25628040, vclk div: 7
- [ 1.770873] s3cfb s3cfb: pixclock adjusted from 39019 to 41979
- [ 1.777338] s3cfb s3cfb: closing bootloader FIMD window 0
- [ 1.783384] s3cfb s3cfb: [fb0] turn off
- [ 1.787597] s3cfb s3cfb: [fb2] turn on
- [ 1.791720] s3cfb s3cfb: global display is on
- [ 1.796624] s3cfb s3cfb: registered successfully
- [ 1.802132] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
- [ 1.820779] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
- [ 1.840343] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
- [ 1.860095] PVR: PVRCore_Init
- [ 1.863401] PVR: LinuxMMInit: Maximum page pool size: 5400
- [ 1.869325] PVR: PVRSRVDriverProbe(pDevice=c0bbf5f0)
- [ 1.876520] PVR: PVRCore_Init: major device 252
- [ 1.881469] PA FB = 0x50065000, bits per pixel = 32
- [ 1.886480] screen width=480 height=800 va=0xe0065000 pa=0x50065000
- [ 1.892951] xres_virtual = 480, yres_virtual = 5600, xoffset = 0, yoffset = 0
- [ 1.900300] fb_size=10752000
- [ 1.903292] Back frameBuffer[0].VAddr=e01dc000 PAddr=501dc000 size=1536000
- [ 1.910310] Back frameBuffer[1].VAddr=e0353000 PAddr=50353000 size=1536000
- [ 1.917412] Video Y Buffer[0].VAddr=e04ca000 PAddr=504ca000 size=921600
- [ 1.924228] Video Y Buffer[1].VAddr=e05ab000 PAddr=505ab000 size=921600
- [ 1.930986] Video Y Buffer[2].VAddr=e068c000 PAddr=5068c000 size=921600
- [ 1.937809] Video UV Buffer[0].VAddr=e076d000 PAddr=5076d000 size=462848
- [ 1.944657] Video UV Buffer[1].VAddr=e07de000 PAddr=507de000 size=462848
- [ 1.951563] Video UV Buffer[2].VAddr=e084f000 PAddr=5084f000 size=462848
- [ 1.962812] brd: module loaded
- [ 1.968052] loop: module loaded
- [ 1.971356] Android kernel panic handler initialized (bind=kpanic)
- [ 1.977735] Loading pn544 driver
- [ 1.981179] sec_jack_probe : Registering jack driver
- [ 1.986541] wake enabled for irq 38
- [ 1.991000] wake enabled for irq 167
- [ 1.995123] fsa9480 1-0025: dev1: 0x8, dev2: 0x0
- [ 1.999940] i2c-core: driver [fsa9480] using legacy suspend method
- [ 2.006338] i2c-core: driver [fsa9480] using legacy resume method
- [ 2.013107] Samsung OneNAND Driver (AUDI).
- [ 2.017410] OneNAND: Clock gating is enabled.
- [ 2.021925] OneNAND Manufacturer: Samsung (0xec)
- [ 2.026732] Muxed OneNAND 1024MB 1.8V 16-bit (0x60)
- [ 2.031736] OneNAND version = 0x0031
- [ 2.035410] Chip support all block unlock
- [ 2.039609] Chip has single dataram
- [ 2.043193] OneNAND Sync. Burst Read support
- [ 2.047580] OneNAND Sync. Burst Write support
- [ 2.152766] OneNAND: There's no interrupt. We use the normal wait
- [ 2.164276] Scanning device for bad blocks
- [ 2.550062] onenand_bbt_wait: ecc error = 0x0001, controller error 0x0400
- [ 2.556996] OneNAND eraseblock 2832 is an initial bad block
- [ 2.568353] onenand_bbt_wait: ecc error = 0x0001, controller error 0x0400
- [ 2.575279] OneNAND eraseblock 2874 is an initial bad block
- [ 2.745440] OneNAND eraseblock 4095 is an initial bad block
- [ 2.751141] Creating 6 MTD partitions on "s5p-onenand":
- [ 2.756563] 0x000001200000-0x000001980000 : "boot"
- [ 2.762223] 0x000001980000-0x000002100000 : "recovery"
- [ 2.768214] 0x000002100000-0x0000051c0000 : "system"
- [ 2.774080] 0x0000051c0000-0x00003e880000 : "userdata"
- [ 2.781610] 0x00003e880000-0x00003eb00000 : "cache"
- [ 2.787313] 0x00003eb00000-0x000040000000 : "reservoir"
- [ 2.953592] tl2796_probe successfully proved
- [ 2.958064] PPP generic driver version 2.4.2
- [ 2.962593] PPP Deflate Compression module registered
- [ 2.967844] PPP BSD Compression module registered
- [ 2.973272] PPP MPPE Compression module registered
- [ 2.978317] NET: Registered protocol family 24
- [ 2.984116] tun: Universal TUN/TAP device driver, 1.6
- [ 2.989318] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.995829] [WGPIO] WIMAXGPIO: 1.0.1, Samsung WiMax SDIO GPIO Device Driver
- [ 3.003003] [WGPIO] IOCTL SDIO GPIO driver installing
- [ 3.132456] udc_reinit: c0be32d8
- [ 3.135874] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
- [ 3.135883] s3c-udc : version 15 March 2009 (DMA Mode)
- [ 3.149963] usb_gadget_probe_driver: android_usb
- [ 3.154744] udc_reinit: c0be32d8
- [ 3.158645] gserial_setup: registered 4 ttyGS* devices
- [ 3.164426] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 3.171474] android_usb gadget: Number of LUNs=1
- [ 3.176282] lun0: LUN: removable file: (no medium)
- [ 3.181291] android_usb gadget: I/O thread pid: 58
- [ 3.186483] android_usb gadget: android_usb ready
- [ 3.191328] s3c_udc_power : ON
- [ 3.195025] udc_reinit: c0be32d8
- [ 3.198429] udc_enable: c0be32d8
- [ 3.216300] S3C USB 2.0 OTG Controller Core Initialized : 0x800c3800
- [ 3.222798] udc_reinit: c0be32d8
- [ 3.226199] udc_disable: c0be32d8
- [ 3.229625] s3c_udc_power : OFF
- [ 3.233769] Registered gadget driver 'android_usb'
- [ 3.238876]
- [ 3.238880] can_request_irq=0
- [ 3.243630] wake enabled for irq 37
- [ 3.247234]
- [ 3.247238] @@ Slidegpio_isr_setup
- [ 3.252539] input: s3c-keypad as /devices/virtual/input/input0
- [ 3.258719] s3c-keypad Initialized
- [ 3.262366] S3C Keypad Driver
- [ 3.265500] usbcore: registered new interface driver xpad
- [ 3.272883] usbcore: registered new interface driver usb_acecad
- [ 3.279012] acecad: v3.2:USB Acecad Flair tablet driver
- [ 3.284405] usbcore: registered new interface driver aiptek
- [ 3.290171] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- [ 3.298249] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- [ 3.305902] usbcore: registered new interface driver gtco
- [ 3.311495] GTCO usb driver version: 2.00.0006
- [ 3.315841] usbcore: registered new interface driver hanwang
- [ 3.321933] usbcore: registered new interface driver kbtab
- [ 3.327554] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- [ 3.333479] usbcore: registered new interface driver wacom
- [ 3.339156] wacom: v1.52:USB Wacom tablet driver
- [ 3.344130] bma023 1-0038: bma023 found
- [ 3.348406] bma023 1-0038: al_version=2, ml_version=1
- [ 3.376005] input: accelerometer_sensor as /devices/virtual/input/input1
- [ 3.383381] input: magnetic_sensor as /devices/platform/s3c2440-i2c.1/i2c-1/1-002e/input/input2
- [ 3.392585] input: raw_magnetic_sensor as /devices/platform/s3c2440-i2c.1/i2c-1/1-002e/input/input3
- [ 3.408403] i2c-core: driver [yas529] using legacy suspend method
- [ 3.414704] i2c-core: driver [yas529] using legacy resume method
- [ 3.421176] input: orientation_sensor as /devices/virtual/input/input4
- [ 3.428176] wake enabled for irq 166
- [ 3.431886] GPIO Input Driver: Start gpio inputs for victory-keypad in interrupt mode
- [ 3.440093] input: victory-keypad as /devices/virtual/input/input5
- [ 3.447000] input: proximity_sensor as /devices/virtual/input/input6
- [ 3.453819] input: light_sensor as /devices/virtual/input/input7
- [ 3.460392] max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
- [ 3.466487] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- [ 3.472849] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- [ 3.478502] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- [ 3.484193] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- [ 3.489816] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- [ 3.495715] using rtc device, s3c, for alarms
- [ 3.499960] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
- [ 3.506499] i2c /dev entries driver
- [ 3.511224] lirc_dev: IR Remote Control driver registered, major 250
- [ 3.517825] IR NEC protocol handler initialized
- [ 3.522540] IR RC5(x) protocol handler initialized
- [ 3.527460] IR RC6 protocol handler initialized
- [ 3.532176] IR JVC protocol handler initialized
- [ 3.536828] IR Sony protocol handler initialized
- [ 3.541569] IR RC5 (streamzap) protocol handler initialized
- [ 3.547335] IR LIRC bridge handler initialized
- [ 3.551896] Linux video capture interface: v2.00
- [ 3.556812] gspca: v2.13.0 registered
- [ 3.560598] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
- [ 3.560606]
- [ 3.569503] S3C JPEG Driver, (c) 2007 Samsung Electronics
- [ 3.576177] JPEG driver for S5PV210
- [ 3.581917] max17040 9-0036: MAX17040 Fuel-Gauge Ver 03
- [ 3.588121] device-mapper: uevent: version 1.0.3
- [ 3.593190] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 3.601902] Bluetooth: HCI UART driver ver 2.2
- [ 3.606533] Bluetooth: HCI H4 protocol initialized
- [ 3.611608] cpuidle: using governor ladder
- [ 3.615893] cpuidle: using governor menu
- [ 3.620044] sdhci: Secure Digital Host Controller Interface driver
- [ 3.626359] sdhci: Copyright(c) Pierre Ossman
- [ 3.631001] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
- [ 3.637782] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
- [ 3.644846] mmc0: no vmmc regulator found
- [ 3.649058] Registered led device: mmc0::
- [ 3.653331] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
- [ 3.660649] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
- [ 3.667482] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
- [ 3.675478] mmc1: no vmmc regulator found
- [ 3.679738] Registered led device: mmc1::
- [ 3.683962] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
- [ 3.694387] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
- [ 3.701272] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
- [ 3.708311] mmc2: no vmmc regulator found
- [ 3.712511] Registered led device: mmc2::
- [ 3.717771] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- [ 3.725294] Registered led device: red
- [ 3.729256] Registered led device: blue
- [ 3.738519] usbcore: registered new interface driver usbhid
- [ 3.744364] usbhid: USB HID core driver
- [ 3.748666] logger: created 256K log 'log_main'
- [ 3.753430] logger: created 256K log 'log_events'
- [ 3.759366] logger: created 256K log 'log_radio'
- [ 3.764271] logger: created 256K log 'log_system'
- [ 3.769639] pdp_activate, id: 1
- [ 3.773075] ttyCSD(id: 1) serial device is created.
- [ 3.781167] pdp_activate, id: 7
- [ 3.784637] ttyCDMA(id: 7) serial device is created.
- [ 3.789798] pdp_activate, id: 9
- [ 3.793142] ttyTRFB(id: 9) serial device is created.
- [ 3.799264] pdp_activate, id: 0
- [ 3.802584] failed to create a serial device for
- [ 3.807852] wake enabled for irq 43
- [ 3.811486] [OneDRAM] PHONE_ACTIVE level: LOW , sem: 1, phone_sync: 0
- [ 3.821306] level device init
- [ 3.825602] WM8994 Audio Codec 0.1
- [ 3.845183] s3c_idma_preallocate_buffer: VA-e80c0000 PA-C0000000 163840bytes
- [ 3.853017] asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
- [ 3.862399] ALSA device list:
- [ 3.865598] #0: smdkc110
- [ 3.868424] oprofile: hardware counters not available
- [ 3.873666] oprofile: using timer interrupt.
- [ 3.878321] GACT probability NOT on
- [ 3.882959] Mirror/redirect action on
- [ 3.886816] u32 classifier
- [ 3.889629] Actions configured
- [ 3.893146] Netfilter messages via NETLINK v0.30.
- [ 3.901190] nf_conntrack version 0.5.0 (5885 buckets, 23540 max)
- [ 3.908185] ctnetlink v0.93: registering with nfnetlink.
- [ 3.913751] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.920858] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.928168] xt_time: kernel timezone is -0000
- [ 3.934180] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.939789] arp_tables: (C) 2002 David S. Miller
- [ 3.947700] TCP cubic registered
- [ 3.951965] NET: Registered protocol family 10
- [ 3.960544] Mobile IPv6
- [ 3.963141] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.969955] IPv6 over IPv4 tunneling driver
- [ 3.978568] NET: Registered protocol family 17
- [ 3.983165] NET: Registered protocol family 15
- [ 3.987848] Bluetooth: RFCOMM TTY layer initialized
- [ 3.993004] Bluetooth: RFCOMM socket layer initialized
- [ 3.999310] Bluetooth: RFCOMM ver 1.11
- [ 4.005288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 4.010746] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.017002] NET: Registered protocol family 35
- [ 4.021702] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
- [ 4.029624] ThumbEE CPU extension supported.
- [ 4.034329] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
- [ 4.046015] regulator_init_complete: VCC_1.8V: incomplete constraints, leaving on
- [ 4.053946] regulator_init_complete: VDD_INT: incomplete constraints, leaving on
- [ 4.061838] regulator_init_complete: VDD_ARM: incomplete constraints, leaving on
- [ 4.071296] regulator_init_complete: CAM_SENSOR_CORE_1.8V: incomplete constraints, leaving on
- [ 4.081111] regulator_init_complete: VADC_3.3V: incomplete constraints, leaving on
- [ 4.089129] regulator_init_complete: pd_mfc_supply: incomplete constraints, leaving on
- [ 4.097254] regulator_init_complete: pd_tv_supply: incomplete constraints, leaving on
- [ 4.105231] regulator_init_complete: pd_cam_supply: incomplete constraints, leaving on
- [ 4.113467] ## wifi_probe
- [ 4.116188] wifi_set_power = 1
- [ 4.307046] mmc2: new high speed SDHC card at address e68b
- [ 4.315362] mmcblk0: mmc2:e68b SU08G 7.40 GiB
- [ 4.324754] wifi_set_carddetect = 1
- [ 4.330072] mmcblk0: p1
- [ 4.598839] mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
- [ 4.616599] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.663287] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.682671] mmc1: new SDIO card at address 0001
- [ 4.839462] F1 signature read @0x18000000=0x9934329
- [ 4.855467] DHD: dongle ram size is set to 294912(orig 294912)
- [ 4.866615] wl_create_event_handler thr:45 started
- [ 4.873948] dhd_attach thr:46 started
- [ 4.878958] dhd_attach thr:47 started
- [ 4.887028] dhd_attach thr:48 started
- [ 4.892900] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 4.901461]
- [ 4.901464] Dongle Host Driver, version 5.90.195.104
- [ 4.901469] Compiled in drivers/net/wireless/bcmdhd on Aug 31 2013 at 18:19:08
- [ 4.915477] wifi_set_power = 0
- [ 4.918629] =========== WLAN placed in RESET ========
- [ 4.924020] input: cypress-touchkey as /devices/virtual/input/input8
- [ 5.742620] cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0x37, rev2 = 0xc0
- [ 5.827928] irq number = 308
- [ 5.831694] +-----------------------------------------+
- [ 5.838290] | Quantum Touch Driver Probe! |
- [ 5.844429] +-----------------------------------------+
- [ 5.923875] input: qt602240_ts_input as /devices/virtual/input/input9
- [ 5.987233] 0x1c
- [ 5.990037] 0x34
- [ 5.993070] 0xff
- [ 5.995984] 0x00
- [ 5.998986]
- [ 5.999014]
- [ 6.003850] 0x1c
- [ 6.006858] 0x34
- [ 6.010324] 0xff
- [ 6.013321] 0x00
- [ 6.016314]
- [ 6.016341]
- [ 6.102780] [TSP] msg id = 1 80 65 48 71 0 0 0 0
- [ 6.110125] [TSP] msg id = 1 10 65 48 71 0 0 0 0
- [ 6.116728] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
- [ 6.123301] s3c-rtc s3c2410-rtc: setting system clock to 2005-01-01 00:00:25 UTC (1104537625)
- [ 6.134119] [TSP] msg id = 1 0 65 48 71 0 0 0 0
- [ 6.144387] FIMC0 registered successfully
- [ 6.149742] FIMC1 registered successfully
- [ 6.155053] FIMC2 registered successfully
- [ 6.159316] max8998_charger_probe : MAX8998 Charger Driver Loading
- [ 6.167339] max8998_charger_probe : pmic interrupt registered
- [ 6.174046] check_lpm_charging_mode : lpm_charging_mode(0)
- [ 6.181129] wake enabled for irq 39
- [ 6.189008] Warning: unable to open an initial console.
- [ 6.194478] Freeing init memory: 796K
- [ 8.741906] yaffs: dev is 32505858 name is "mtdblock2" rw
- [ 8.747539] yaffs: passed flags ""
- [ 8.751041] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
- [ 8.762721] yaffs: yaffs_read_super: is_checkpointed 1
- [ 9.188331] systemd-udevd[154]: starting version 204
- [ 9.743273] initrd: mounting /dev/mtdblock3
- [ 9.834331] VFS: could not find a valid V7 on mtdblock3.
- [ 9.872909] yaffs: dev is 32505859 name is "mtdblock3" rw
- [ 9.879830] yaffs: passed flags ""
- [ 9.884230] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
- [ 9.891274] yaffs: auto selecting yaffs2
- [ 10.087816] onenand_wait: ECC error = 0x0001
- [ 10.095173] onenand_wait: ECC error = 0x0001
- [ 10.358058] yaffs: block 2506 is bad
- [ 10.364674] yaffs: block 2548 is bad
- [ 11.384810] onenand_wait: correctable ECC error = 0x0002
- [ 11.722173] onenand_wait: correctable ECC error = 0x0002
- [ 11.927184] onenand_wait: correctable ECC error = 0x0002
- [ 12.997310] onenand_wait: correctable ECC error = 0x0002
- [ 13.701563] onenand_wait: correctable ECC error = 0x0002
- [ 13.747756] onenand_wait: correctable ECC error = 0x0002
- [ 14.719163] onenand_wait: correctable ECC error = 0x0002
- [ 14.800138] onenand_wait: correctable ECC error = 0x0002
- [ 14.879110] onenand_wait: correctable ECC error = 0x0002
- [ 15.127215] onenand_wait: correctable ECC error = 0x0002
- [ 15.587493] onenand_wait: correctable ECC error = 0x0002
- [ 16.271583] onenand_wait: correctable ECC error = 0x0002
- [ 16.533957] onenand_wait: correctable ECC error = 0x0002
- [ 16.540168] onenand_wait: correctable ECC error = 0x0002
- [ 17.439815] onenand_wait: correctable ECC error = 0x0002
- [ 17.467512] onenand_wait: correctable ECC error = 0x0002
- [ 17.618140] onenand_wait: correctable ECC error = 0x0002
- [ 17.955720] onenand_wait: correctable ECC error = 0x0002
- [ 18.132574] onenand_wait: correctable ECC error = 0x0002
- [ 18.624886] onenand_wait: correctable ECC error = 0x0002
- [ 18.654037] onenand_wait: correctable ECC error = 0x0002
- [ 19.058069] onenand_wait: correctable ECC error = 0x0002
- [ 19.348287] onenand_wait: correctable ECC error = 0x0002
- [ 19.512800] onenand_wait: correctable ECC error = 0x0002
- [ 19.902859] onenand_wait: correctable ECC error = 0x0002
- [ 20.593323] onenand_wait: correctable ECC error = 0x0002
- [ 20.736979] onenand_wait: correctable ECC error = 0x0002
- [ 20.856942] onenand_wait: correctable ECC error = 0x0002
- [ 21.514231] onenand_wait: correctable ECC error = 0x0002
- [ 21.872691] onenand_wait: correctable ECC error = 0x0002
- [ 21.939344] onenand_wait: correctable ECC error = 0x0002
- [ 22.262351] onenand_wait: correctable ECC error = 0x0002
- [ 22.458111] onenand_wait: correctable ECC error = 0x0002
- [ 22.775703] onenand_wait: correctable ECC error = 0x0002
- [ 23.614036] onenand_wait: correctable ECC error = 0x0002
- [ 24.256809] onenand_wait: correctable ECC error = 0x0002
- [ 24.558629] onenand_wait: correctable ECC error = 0x0002
- [ 24.574311] onenand_wait: correctable ECC error = 0x0002
- [ 24.805268] onenand_wait: correctable ECC error = 0x0002
- [ 25.419681] onenand_wait: correctable ECC error = 0x0002
- [ 25.556936] onenand_wait: correctable ECC error = 0x0002
- [ 26.989386] onenand_wait: correctable ECC error = 0x0002
- [ 27.085709] onenand_wait: correctable ECC error = 0x0002
- [ 27.221132] onenand_wait: correctable ECC error = 0x0002
- [ 27.628129] onenand_wait: correctable ECC error = 0x0002
- [ 27.789686] onenand_wait: correctable ECC error = 0x0002
- [ 27.806042] onenand_wait: correctable ECC error = 0x0002
- [ 27.844803] onenand_wait: correctable ECC error = 0x0002
- [ 28.043197] onenand_wait: correctable ECC error = 0x0002
- [ 28.094825] onenand_wait: correctable ECC error = 0x0002
- [ 28.108627] onenand_wait: correctable ECC error = 0x0002
- [ 28.245579] yaffs: yaffs_read_super: is_checkpointed 0
- [ 38.338230] ANNER: move sys done. ...
- [ 38.344796] ANNER: move proc done.
- [ 38.370982] ANNER: running upstart.
- [ 38.378658] crw------- 1 254, 0 ttyFIQ0
- [ 38.378667] crw-r--r-- 1 10, 63 rfkill
- [ 38.378672] crw-r----- 1 1, 1 mem
- [ 38.378676] crw-r----- 1 1, 2 kmem
- [ 38.378680] crw-rw-rw- 1 1, 3 null
- [ 38.378684] crw-rw-rw- 1 1, 5 zero
- [ 38.378688] crw-rw-rw- 1 1, 7 full
- [ 38.378692] crw-rw-rw- 1 1, 8 random
- [ 38.378696] crw-rw-rw- 1 1, 9 urandom
- [ 38.378700] crw------- 1 1, 11 kmsg
- [ 38.378704] crw-rw-rw- 1 5, 0 tty
- [ 38.378708] crw------- 1 5, 1 console
- [ 38.378712] crw--w---- 1 4, 0 tty0
- [ 38.378717] crw------- 1 7, 0 vcs
- [ 38.378720] crw------- 1 7, 128 vcsa
- [ 38.378724] crw------- 1 7, 1 vcs1
- [ 38.378729] crw------- 1 7, 129 vcsa1
- [ 38.378733] crw--w---- 1 4, 1 tty1
- [ 38.378737] crw--w---- 1 4, 2 tty2
- [ 38.378741] crw--w---- 1 4, 3 tty3
- [ 38.378745] crw--w---- 1 4, 4 tty4
- [ 38.378749] crw--w---- 1 4, 5 tty5
- [ 38.378753] crw--w---- 1 4, 6 tty6
- [ 38.378757] crw--w---- 1 4, 7 tty7
- [ 38.378761] crw--w---- 1 4, 8 tty8
- [ 38.378765] crw--w---- 1 4, 9 tty9
- [ 38.378769] crw--w---- 1 4, 10 tty10
- [ 38.378773] crw--w---- 1 4, 11 tty11
- [ 38.378777] crw--w---- 1 4, 12 tty12
- [ 38.378781] crw--w---- 1 4, 13 tty13
- [ 38.378785] crw--w---- 1 4, 14 tty14
- [ 38.378789] crw--w---- 1 4, 15 tty15
- [ 38.378793] crw--w---- crw--w---- 1 4, 35 tty35
- [ 38.517030] crw--w---- 1 4, 36 tty36
- [ 38.517036] crw--w---- 1 4, 37 tty37
- [ 38.517040] crw--w---- 1 4, 38 tty38
- [ 38.517044] crw--w---- 1 4, 39 tty39
- [ 38.517048] crw--w---- 1 4, 40 tty40
- [ 38.517052] crw--w---- 1 4, 41 tty41
- [ 38.517056] crw--w---- 1 4, 42 tty42
- [ 38.517060] crw--w---- 1 4, 43 tty43
- [ 38.517064] crw--w---- 1 4, 44 tty44
- [ 38.517068] crw--w---- 1 4, 45 tty45
- [ 38.517072] crw--w---- 1 4, 46 tty46
- [ 38.517076] crw--w---- 1 4, 47 tty47
- [ 38.517080] crw--w---- 1 4, 48 tty48
- [ 38.517084] crw--w---- 1 4, 49 tty49
- [ 38.517088] crw--w---- 1 4, 50 tty50
- [ 38.517092] crw--w---- 1 4, 51 tty51
- [ 38.517096] crw--w---- 1 4, 52 tty52
- [ 38.517100] crw--w---- 1 4, 53 tty53
- [ 38.517104] crw--w---- 1 4, 54 tty54
- [ 38.517108] crw--w---- 1 4, 55 tty55
- [ 38.517112] crw--w---- 1 4, 56 tty56
- [ 38.517116] crw--w---- 1 4, 57 tty57
- [ 38.517120] crw--w---- 1 4, 58 tty58
- [ 38.517124] crw--w---- 1 4, 59 tty59
- [ 38.517128] crw--w---- 1 4, 60 tty60
- [ 38.517132] crw--w---- 1 4, 61 tty61
- [ 38.517136] crw--w---- 1 4, 62 tty62
- [ 38.517140] crw--w---- 1 4, 63 tty63
- [ 38.517144] crw------- 1 10, 0 tracebuf
- [ 38.517149] crw------- 1 10, 131 adc
- [ 38.517152] crw------- 1 10, 62 ashm 4 ram4
- [ 38.652658] brw------- 1 1, 5 ram5
- [ 38.652663] brw------- 1 1, 6 ram6
- [ 38.652667] brw------- 1 1, 7 ram7
- [ 38.652671] brw------- 1 1, 8 ram8
- [ 38.652675] brw------- 1 1, 9 ram9
- [ 38.652679] brw------- 1 1, 10 ram10
- [ 38.652683] brw------- 1 1, 11 ram11
- [ 38.652687] brw------- 1 1, 12 ram12
- [ 38.652691] brw------- 1 1, 13 ram13
- [ 38.652695] brw------- 1 1, 14 ram14
- [ 38.652699] brw------- 1 1, 15 ram15
- [ 38.652703] brw------- 1 7, 0 loop0
- [ 38.652707] brw------- 1 7, 1 loop1
- [ 38.652711] brw------- 1 7, 2 loop2
- [ 38.652715] brw------- 1 7, 3 loop3
- [ 38.652719] brw------- 1 7, 4 loop4
- [ 38.652723] brw------- 1 7, 5 loop5
- [ 38.652727] brw------- 1 7, 6 loop6
- [ 38.652731] brw------- 1 7, 7 loop7
- [ 38.652735] crw------- 1 90, 0 mtd0
- [ 38.652739] crw------- 1 90, 1 mtd0ro
- [ 38.652743] brw------- 1 31, 0 mtdblock0
- [ 38.652747] crw------- 1 90, 2 mtd1
- [ 38.652751] crw------- 1 90, 3 mtd1ro
- [ 38.652755] brw------- 1 31, 1 mtdblock1
- [ 38.652759] crw------- 1 90, 4 mtd2
- [ 38.652763] crw------- 1 90, 5 mtd2ro
- [ 38.652767] brw------- 1 31, 2 mtdblock2
- [ 38.773275] crw------- 1 90, 6 mtd3
- [ 38.773281] crw------- 1 90, 7 mtd3ro
- [ 38.773285] brw------- 1 31, 3 mtdblock3
- [ 38.773289] crw------- 1 90, 8 mtd4
- [ 38.773293] crw------- 1 90, 9 mtd4ro
- [ 38.773297] brw------- 1 31, 4 mtdblock4
- [ 38.773302] crw------- 1 90, 10 mtd5
- [ 38.773306] crw------- 1 90, 11 mtd5ro
- [ 38.773310] brw------- 1 31, 5 mtdblock5
- [ 38.773314] crw------- 1 108, 0 ppp
- [ 38.773318] drwxr-xr-x 2 60 net
- [ 38.773322] crw------- 1 10, 61 android_adb
- [ 38.773326] crw------- 1 251, 0 ttyGS0
- [ 38.773330] crw------- 1 251, 1 ttyGS1
- [ 38.773334] crw------- 1 251, 2 ttyGS2
- [ 38.773338] crw------- 1 251, 3 ttyGS3
- [ 38.773342] crw------- 1 10, 60 mtp_usb
- [ 38.773346] crw------- 1 10, 59 usb_accessory
- [ 38.773351] drwxr-xr-x 2 240 input
- [ 38.773355] crw------- 1 10, 58 accelerometer
- [ 38.773359] crw------- 1 10, 57 keychord
- [ 38.773363] crw------- 1 10, 223 uinput
- [ 38.773367] crw------- 1 10, 56 alarm
- [ 38.773371] crw------- 1 253, 0 rtc0
- [ 38.773375] crw------- 1 89, 4 i2c-4
- [ 38.773379] crw------- 1 89, 5 i2c-5
- [ 38.773383] crw------- 1 89, 6 i2c-6
- [ 38.773387] crw------- 1 89, 9 i2c-9
- [ 38.773392] crw------- 1 89, 11 i2c-11
- [ 38.773396] crw------- 1 89, 12 i2c-12
- [ 38.773400] crw------ultipdp
- [ 38.908863] crw------- 1 251, 8 ttyCSD0
- [ 38.908868] crw------- 1 251, 9 ttyCDMA0
- [ 38.908872] crw------- 1 251, 10 ttyTRFB0
- [ 38.908876] crw------- 1 10, 49 level
- [ 38.908880] drwxr-xr-x 2 120 snd
- [ 38.908884] crw------- 1 10, 48 xt_qtaguid
- [ 38.908888] crw------- 1 10, 47 cpu_dma_latency
- [ 38.908893] crw------- 1 10, 46 network_latency
- [ 38.908898] crw------- 1 10, 45 network_throughput
- [ 38.908902] brw------- 1 179, 0 mmcblk0
- [ 38.908906] brw------- 1 179, 1 mmcblk0p1
- [ 38.908910] crw------- 1 81, 0 video0
- [ 38.908915] crw------- 1 81, 1 video1
- [ 38.908919] crw------- 1 81, 2 video2
- [ 38.908923] drwxr-xr-x 2 0 pts
- [ 38.908927] lrwxrwxrwx 1 11 core -> /proc/kcore
- [ 38.908931] lrwxrwxrwx 1 13 fd -> /proc/self/fd
- [ 38.908936] lrwxrwxrwx 1 15 stdin -> /proc/self/fd/0
- [ 38.908941] lrwxrwxrwx 1 15 stdout -> /proc/self/fd/1
- [ 38.908946] lrwxrwxrwx 1 15 stderr -> /proc/self/fd/2
- [ 38.908951] drwxr-xr-x 2 3420 char
- [ 38.908955] lrwxrwxrwx 1 4 rtc -> rtc0
- [ 38.908959] drwxr-xr-x 2 680 block
- [ 38.908963] drwxr-xr-x 5 100 disk
- [ 39.451313] init: ureadahead main process (231) terminated with status 5
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement