Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- (Re)start USB...
- USB0: USB EHCI 1.00
- scanning bus 0 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- reading /dts/kirkwood-nsa310.dtb
- 13066 bytes read in 48 ms (265.6 KiB/s)
- reading /uImage
- 3137384 bytes read in 138 ms (21.7 MiB/s)
- reading /uInitrd
- 6277313 bytes read in 255 ms (23.5 MiB/s)
- ## Booting kernel from Legacy Image at 00800000 ...
- Image Name: vmlinuz-4.2.0-rm-1
- Created: 2015-09-06 18:37:47 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3137320 Bytes = 3 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 01100000 ...
- Image Name: initrd.img-4.2.0-rm-1
- Created: 2015-09-06 18:38:57 UTC
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 6277249 Bytes = 6 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01c00000
- Booting using the fdt blob at 0x1c00000
- Loading Kernel Image ... OK
- Loading Ramdisk to 0f51f000, end 0fb1b881 ... OK
- Loading Device Tree to 0f518000, end 0f51e309 ... OK
- Using machid 0x118f from environment
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.2.0-rm-1 (root@debianNSA325v2) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sun Sep 6 13:55:01 CEST 2015
- [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
- [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000] Machine model: ZyXEL NSA310
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootfstype=ext4
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 244464K/262144K available (5999K kernel code, 572K rwdata, 1984K rodata, 284K init, 312K bss, 17680K reserved, 0K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc07d403c (7985 kB)
- [ 0.000000] .init : 0xc07d5000 - 0xc081c000 ( 284 kB)
- [ 0.000000] .data : 0xc081c000 - 0xc08ab1e4 ( 573 kB)
- [ 0.000000] .bss : 0xc08ab1e4 - 0xc08f9464 ( 313 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
- [ 0.000325] Console: colour dummy device 80x30
- [ 0.000356] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
- [ 0.090101] pid_max: default: 32768 minimum: 301
- [ 0.090210] Security Framework initialized
- [ 0.090291] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090312] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.091066] Initializing cgroup subsys blkio
- [ 0.091098] Initializing cgroup subsys devices
- [ 0.091123] Initializing cgroup subsys freezer
- [ 0.091156] Initializing cgroup subsys net_cls
- [ 0.091240] CPU: Testing write buffer coherency: ok
- [ 0.091683] Setting up static identity map for 0x8200 - 0x8258
- [ 0.092016] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
- [ 0.095756] devtmpfs: initialized
- [ 0.102108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.102578] prandom: seed boundary self test passed
- [ 0.106317] prandom: 100 self tests passed
- [ 0.106339] pinctrl core: initialized pinctrl subsystem
- [ 0.107785] NET: Registered protocol family 16
- [ 0.108192] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.130107] cpuidle: using governor ladder
- [ 0.160105] cpuidle: using governor menu
- [ 0.160540] Feroceon L2: Enabling L2
- [ 0.160587] Feroceon L2: Cache support initialised.
- [ 0.166233] No ATAGs?
- [ 0.201813] vgaarb: loaded
- [ 0.202204] usbcore: registered new interface driver usbfs
- [ 0.202287] usbcore: registered new interface driver hub
- [ 0.202368] usbcore: registered new device driver usb
- [ 0.203470] clocksource: Switched to clocksource orion_clocksource
- [ 0.259914] NET: Registered protocol family 2
- [ 0.260710] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.260749] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.260780] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.260847] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.260871] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.261077] NET: Registered protocol family 1
- [ 0.261470] RPC: Registered named UNIX socket transport module.
- [ 0.261483] RPC: Registered udp transport module.
- [ 0.261490] RPC: Registered tcp transport module.
- [ 0.261498] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.261779] Unpacking initramfs...
- [ 0.810660] Freeing initrd memory: 6132K (cf51f000 - cfb1c000)
- [ 0.810772] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 0.811917] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.811950] Initialise system trusted keyring
- [ 0.812058] audit: initializing netlink subsys (disabled)
- [ 0.812114] audit: type=2000 audit(0.800:1): initialized
- [ 0.812800] zpool: loaded
- [ 0.812816] zbud: loaded
- [ 0.813104] VFS: Disk quotas dquot_6.6.0
- [ 0.813161] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.813838] NFS: Registering the id_resolver key type
- [ 0.813887] Key type id_resolver registered
- [ 0.813896] Key type id_legacy registered
- [ 0.813924] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.813940] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.814143] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.814657] Key type big_key registered
- [ 0.835256] Key type asymmetric registered
- [ 0.835282] Asymmetric key parser 'x509' registered
- [ 0.835377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.835395] io scheduler noop registered
- [ 0.835408] io scheduler deadline registered
- [ 0.835467] io scheduler cfq registered (default)
- [ 0.836855] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
- [ 0.837542] irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated
- [ 0.837978] irq: Cannot allocate irq_descs @ IRQ65, assuming pre-allocated
- [ 0.838828] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
- [ 0.838849] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
- [ 0.838863] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
- [ 0.838876] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.838964] pci 0000:00:01.0: IOMMU is currently not supported for PCI
- [ 0.839285] PCI: bus0: Fast back to back transfers disabled
- [ 0.839312] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.839673] pci 0000:01:00.0: IOMMU is currently not supported for PCI
- [ 0.840086] PCI: bus1: Fast back to back transfers disabled
- [ 0.840261] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
- [ 0.840277] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
- [ 0.840296] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
- [ 0.840313] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
- [ 0.840339] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
- [ 0.840364] pci 0000:01:00.0: BAR 0: assigned [io 0x10000-0x100ff]
- [ 0.840380] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.840393] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
- [ 0.840408] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
- [ 0.840733] mv_xor f1060800.xor: Marvell shared XOR driver
- [ 0.874162] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy )
- [ 0.914143] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy )
- [ 0.914357] mv_xor f1060900.xor: Marvell shared XOR driver
- [ 0.954150] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy )
- [ 0.994151] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy )
- [ 0.994613] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.996037] console [ttyS0] disabled
- [ 0.996104] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
- [ 1.713695] console [ttyS0] enabled
- [ 1.718501] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
- [ 1.724924] nand: Samsung NAND 128MiB 3,3V 8-bit
- [ 1.729564] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 1.737200] Scanning device for bad blocks
- [ 1.786821] Bad eraseblock 472 at 0x000003b00000
- [ 1.821164] Bad eraseblock 781 at 0x0000061a0000
- [ 1.855626] libphy: Fixed MDIO Bus: probed
- [ 1.860114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.866783] ehci-pci: EHCI PCI platform driver
- [ 1.871318] ehci-orion: EHCI orion driver
- [ 1.875638] orion-ehci f1050000.ehci: EHCI Host Controller
- [ 1.881177] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
- [ 1.889088] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
- [ 1.913497] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
- [ 1.919782] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.926634] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.933910] usb usb1: Product: EHCI Host Controller
- [ 1.938810] usb usb1: Manufacturer: Linux 4.2.0-rm-1 ehci_hcd
- [ 1.944601] usb usb1: SerialNumber: f1050000.ehci
- [ 1.950053] hub 1-0:1.0: USB hub found
- [ 1.953906] hub 1-0:1.0: 1 port detected
- [ 1.958448] usbcore: registered new interface driver mdc800
- [ 1.964098] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
- [ 1.972193] mousedev: PS/2 mouse device common for all mice
- [ 1.978514] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
- [ 1.985660] i2c /dev entries driver
- [ 1.992417] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.998291] drop_monitor: Initializing network drop monitor service
- [ 2.004878] NET: Registered protocol family 17
- [ 2.009473] Key type dns_resolver registered
- [ 2.014633] Loading compiled-in X.509 certificates
- [ 2.019482] registered taskstats version 1
- [ 2.023695] zswap: loading zswap
- [ 2.026947] zswap: using zbud pool
- [ 2.030367] zswap: using lzo compressor
- [ 2.043267] Key type encrypted registered
- [ 2.048134] rtc-mv f1010300.rtc: setting system clock to 2015-09-06 18:51:42 UTC (1441565502)
- [ 2.059198] Freeing unused kernel memory: 284K (c07d5000 - c081c000)
- Loading, please wait...
- [ 2.134632] systemd-udevd[84]: starting version 215
- [ 2.141669] random: systemd-udevd urandom read with 3 bits of entropy available
- [ 2.264578] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 2.270222] pci 0000:00:01.0: enabling device (0140 -> 0143)
- [ 2.275986] usb 1-1: new high-speed USB device number 2 using orion-ehci
- [ 2.323644] r8169 0000:01:00.0: enabling device (0140 -> 0143)
- [ 2.330395] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xd0a6c000, 00:00:00:00:00:30, XID 083000c0 IRQ 83
- [ 2.356314] SCSI subsystem initialized
- [ 2.407928] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 2.426052] sata_mv f1080000.sata: slots 32 ports 2
- [ 2.435490] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 2.442249] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.462493] usb 1-1: Product: USB2.0 Hub
- [ 2.471118] hub 1-1:1.0: USB hub found
- [ 2.479873] hub 1-1:1.0: 4 ports detected
- [ 2.500957] scsi host0: sata_mv
- [ 2.517708] scsi host1: sata_mv
- [ 2.521257] ata1: SATA max UDMA/133 irq 32
- [ 2.546108] ata2: SATA max UDMA/133 irq 32
- [ 2.763505] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
- [ 2.875971] usb 1-1.2: New USB device found, idVendor=090c, idProduct=1000
- [ 2.882895] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.890278] usb 1-1.2: Product: USB Flash Disk
- [ 2.894827] usb 1-1.2: Manufacturer: General
- [ 2.899118] usb 1-1.2: SerialNumber: 043D6THDFZBOT81M
- [ 2.913940] usb-storage 1-1.2:1.0: USB Mass Storage device detected
- [ 2.920598] scsi host2: usb-storage 1-1.2:1.0
- [ 2.926835] usbcore: registered new interface driver usb-storage
- [ 2.936046] usbcore: registered new interface driver uas
- [ 3.053527] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
- [ 3.073736] ata1.00: HPA detected: current 1465147055, native 1465149168
- [ 3.080477] ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7
- [ 3.086538] ata1.00: 1465147055 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 3.113724] ata1.00: configured for UDMA/133
- [ 3.133848] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1118 PQ: 0 ANSI: 5
- [ 3.493509] ata2: SATA link down (SStatus 0 SControl F300)
- [ 3.525956] sd 0:0:0:0: [sda] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
- [ 3.536514] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.541467] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.566165] sda: sda1
- [ 3.570291] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.578876] sd 0:0:0:0: Attached scsi generic sg0 type 0
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Warning: INITRDSTART set to "none" in /etc/default/mdadm, not assembling raid arrays
- done.
- Begin: Running /scripts/local-premount ... done.
- Begin: Waiting for root file system ... [ 4.179703] scsi 2:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4
- [ 4.193662] sd 2:0:0:0: [sdb] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB)
- [ 4.201588] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 4.210780] sd 2:0:0:0: [sdb] Write Protect is off
- [ 4.218641] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.237488] sdb: sdb1 sdb2 sdb3
- [ 4.254892] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- Begin: Running /scripts/local-block ... done.
- done.
- Begin: Checking root file system ... fsck from util-linux 2.25.2
- rootfs: clean, 115187/456960 files, 381543/1827328 blocks
- done.
- [ 5.049848] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- INIT: version 2.88 booting
- [info] Using makefile-style concurrent boot in runlevel S.
- [....] Starting the hotplug events dispatcher: udevd[ 6.424455] systemd-udevd[298]: starting version 215
- . ok
- [....] Synthesizing the initial hotplug events...[ 6.712045] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- done.
- [....] Waiting for /dev to be fully populated...[ 6.966197] orion_wdt: Initial timeout 21 sec
- [ 6.974111] hwmon_vid: Unknown VRM version of your CPU
- [ 7.013158] adt7475 0-002e: ADT7476 device, revision 1
- [ 7.045530] adt7475 0-002e: Optional features: in0 in4 fan4 pwm2 vid
- [ 7.335911] random: nonblocking pool is initialized
- done.
- [ ok ] Generating udev events for MD arrays...done.
- [ ok ] Setting parameters of disc: (none).
- [....] Activating swap...[ 8.656890] Adding 262140k swap on /dev/sdb2. Priority:-1 extents:1 across:262140k FS
- done.
- [ 8.778094] EXT4-fs (sdb3): re-mounted. Opts: (null)
- [....] Checking root file system...fsck from util-linux 2.25.2
- rootfs: clean, 115187/456960 files, 381543/1827328 blocks
- done.
- [ 8.983933] EXT4-fs (sdb3): re-mounted. Opts: (null)
- [ ok ] Activating lvm and md swap...done.
- [....] Checking file systems...fsck from util-linux 2.25.2
- done.
- [ ok ] Loading kernel modules...done.
- [ ok ] Cleaning up temporary files... /tmp.
- [ 10.697019] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: data=writeback
- [ ok ] Mounting local filesystems...done.
- [ ok ] Activating swapfile swap...done.
- [ ok ] Cleaning up temporary files....
- [ ok ] Setting kernel variables ...done.
- [ 11.946408] NET: Registered protocol family 10
- [ 12.114834] r8169 0000:01:00.0 eth0: link down
- [ 12.119321] r8169 0000:01:00.0 eth0: link down
- [ 12.123889] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 13.995672] r8169 0000:01:00.0 eth0: link up
- [ 13.999984] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
- Copyright 2004-2014 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- Listening on LPF/eth0/b0:b2:dc:39:cf:96
- Sending on LPF/eth0/b0:b2:dc:39:cf:96
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPOFFER from 192.168.1.1
- DHCPACK from 192.168.1.1
- Reloading /etc/samba/smb.conf: smbd.
- bound to 192.168.1.126 -- renewal in 18403 seconds.
- done.
- [ ok ] Starting rpcbind daemon....
- [ ok ] Starting NFS common utilities: statd idmapd.
- [ ok ] Cleaning up temporary files....
- [ ok ] Setting sensors limits.
- INIT: Entering runlevel: 2
- [info] Using makefile-style concurrent boot in runlevel 2.
- [ ok ] Starting NFS common utilities: statd idmapd.
- [warn] Not starting NFS kernel daemon: no exports. ... (warning).
- [ ok ] Starting NetBIOS name server: nmbd.
- [ ok ] Starting system logging: syslog-ng.
- [ ok ] Starting MD monitoring service: mdadm --monitor.
- [ ok ] Starting system message bus: dbus.
- [ ok ] Starting NTP server: ntpd.
- [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- [warn] Not starting p910nd daemon. Please edit /etc/default/p910nd first. ... (warning).
- [ ok ] Starting OpenBSD Secure Shell server: sshd.
- [ ok ] Starting SMB/CIFS daemon: smbd.
- Debian GNU/Linux 8 debianNSA310 ttyS0
Add Comment
Please, Sign In to add comment