Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <3>[ 327.053733] init: untracked pid 2548 exited
- <4>[ 344.592066] #lcd_power_ctrl:0 s
- <4>[ 344.877816] #lcd_power_ctrl:0 e
- <6>[ 344.880343] request_suspend_state: sleep (0->3) at 276804339362 (2011-02-27 09:39:52.488517938 UTC)
- <4>[ 344.884784] [COMPASS] ak8973b_early_suspend
- <4>[ 344.969514] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 344.970133] [VIBETONZ] reserved VIBRATOR_DISABLE
- <4>[ 345.022621] #s3cfb_early_suspend
- <4>[ 381.178942] [FSA9480]fsa9480_interrupt
- <4>[ 381.179031] ### FSA9480 interrupt(110) happened! ###
- <4>[ 381.182233] GPIO_JACK_INT_N value : 0
- <4>[ 381.185978] [handle_suspend_intr]: config_gadget_driver (5)
- <4>[ 381.191560] [FSA9480]mode_switch
- <4>[ 381.191623] [FSA9480]fsa9480_check_usb_connection
- <4>[ 381.196262]
- <6>[ 381.221080] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 381.251236] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0x10000
- <4>[ 381.252046] RESET handling skipped : Not valid A or B session [GOTGCTL:0x10000]
- <4>[ 381.306052] [FSA9480] control(0x1a) int1(0x2) adc(0x1f) dev1(0x0) dev2(0x0) man1(0x24) man2(0x2) pwr(1)
- <4>[ 381.335268] disconnect, gadget android_adb_ums_acm
- <4>[ 381.335345] s3c_udc_disable: c0658e00
- <4>[ 381.338147] [s3c_udc_power_down] clk_disable() OK.
- <4>[ 381.342889] [FSA9480]fsa9480_s3c_udc_off
- <4>[ 381.342899] [s3c_udc_power_down]
- <6>[ 381.736055] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 381.768731] [FSA9480]get_usb_power_state : usb_power = 0
- <4>[ 381.768834]
- <6>[ 381.801159] PM: Syncing filesystems ... done.
- <4>[ 382.231544] [FSA9480]fsa9480_interrupt
- <4>[ 382.231638] ### FSA9480 interrupt(110) happened! ###
- <4>[ 382.234848] GPIO_JACK_INT_N value : 0
- <4>[ 382.238669] [FSA9480]mode_switch
- <4>[ 382.238741] [FSA9480]fsa9480_check_usb_connection
- <4>[ 382.243332] [FSA9480] control(0x1e) int1(0x1) adc(0x1f) dev1(0x4) dev2(0x0) man1(0x24) man2(0x0) pwr(0)
- <4>[ 382.356265] [s3c_udc_power_up]
- <4>[ 382.356456] [FSA9480]fsa9480_s3c_udc_on
- <4>[ 382.356528]
- <4>[ 382.362526] [s3c_udc_power_up] clk_enable(otg_clock) OK.
- <4>[ 382.364993] [android_adb_ums_acm] Enumerated as FULL Speed
- <4>[ 382.370682]
- <4>[ 382.370737] [s3c_udc_power_up] POWER-UP OK!.
- <4>[ 382.376207] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 382.376318] Freezing user space processes ...
- <3>[ 382.456949] Freezing of tasks aborted after 0.07 seconds (293 tasks refusing to freeze):
- <4>[ 382.459722]
- <4>[ 382.461063] Restarting tasks ... [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 382.472263] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 382.477804] disconnect, gadget android_adb_ums_acm
- <4>[ 382.510969] done.
- <6>[ 382.511120] suspend: exit suspend, ret = -16 (2011-02-27 09:40:30.119424249 UTC)
- <6>[ 382.537284] request_suspend_state: wakeup (3->0) at 314461386812 (2011-02-27 09:40:30.145575873 UTC)
- <4>[ 382.540823] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 382.546578] #s3cfb_late_resume
- <4>[ 382.597968] #lcd_power_ctrl:1 s
- <4>[ 382.633991] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 382.634800] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 382.640872] disconnect, gadget android_adb_ums_acm
- <4>[ 382.687227] [COMPASS] ak8973b_late_resume
- <4>[ 382.696131] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 382.788235] [android_adb_ums_acm] USB_REQ_SET_ADDRESS (3)
- <4>[ 382.937610] [FSA9480]fsa9480_interrupt
- <4>[ 382.937628] ### FSA9480 interrupt(110) happened! ###
- <4>[ 382.940763] GPIO_JACK_INT_N value : 0
- <4>[ 382.944500] [handle_suspend_intr]: USB Bus Suspend (DSTS):0x2bde01
- <4>[ 382.950567] disconnect, gadget android_adb_ums_acm
- <4>[ 382.955418] [FSA9480]mode_switch
- <4>[ 382.955431] [FSA9480]fsa9480_check_usb_connection
- <4>[ 382.959980]
- <6>[ 382.980961] spica-battery spica-battery: cable_timer_func : intr cnt = 7
- <4>[ 383.009645] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0x10000
- <4>[ 383.010458] RESET handling skipped : Not valid A or B session [GOTGCTL:0x10000]
- <4>[ 383.086069] #lcd_power_ctrl:1 e
- <4>[ 383.096055] [FSA9480] control(0x1a) int1(0x2) adc(0x1f) dev1(0x0) dev2(0x0) man1(0x24) man2(0x2) pwr(1)
- <4>[ 383.130980] s3c_udc_disable: c0658e00
- <4>[ 383.131021] [s3c_udc_power_down] clk_disable() OK.
- <4>[ 383.133785] [FSA9480]fsa9480_s3c_udc_off
- <4>[ 383.133792] [s3c_udc_power_down]
- <6>[ 383.660961] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 383.662277] [FSA9480]get_usb_power_state : usb_power = 0
- <4>[ 383.662290] [FSA9480]fsa9480_interrupt
- <4>[ 383.989940] ### FSA9480 interrupt(110) happened! ###
- <4>[ 383.991790] GPIO_JACK_INT_N value : 0
- <4>[ 383.995534] [FSA9480]mode_switch
- <4>[ 383.995547] [FSA9480]fsa9480_check_usb_connection
- <4>[ 384.000090] [FSA9480] control(0x1e) int1(0x1) adc(0x1f) dev1(0x4) dev2(0x0) man1(0x24) man2(0x0) pwr(0)
- <4>[ 384.130996] [s3c_udc_power_up]
- <4>[ 384.131035] [FSA9480]fsa9480_s3c_udc_on
- <4>[ 384.131042]
- <4>[ 384.134408] [s3c_udc_power_up] clk_enable(otg_clock) OK.
- <4>[ 384.139446]
- <4>[ 384.139456] [s3c_udc_power_up] POWER-UP OK!.
- <4>[ 384.144938] [android_adb_ums_acm] Enumerated as FULL Speed
- <4>[ 384.150535] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 384.150547] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 384.247381] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 384.252922] disconnect, gadget android_adb_ums_acm
- <4>[ 384.313159] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 384.408990] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 384.409796] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 384.415869] disconnect, gadget android_adb_ums_acm
- <4>[ 384.471185] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 384.563141] [android_adb_ums_acm] USB_REQ_SET_ADDRESS (3)
- <6>[ 384.616884] android_adb_ums_acm gadget: high speed config #1: ACM + UMS + ADB (Debugging mode)
- <4>[ 384.619872] acm_disconnected
- <4>[ 392.649527] [FSA9480]fsa9480_interrupt
- <4>[ 392.649614] ### FSA9480 interrupt(110) happened! ###
- <4>[ 392.652815] GPIO_JACK_INT_N value : 0
- <4>[ 392.656574] [handle_suspend_intr]: config_gadget_driver (5)
- <4>[ 392.662167] [FSA9480]mode_switch
- <4>[ 392.662231] [FSA9480]fsa9480_check_usb_connection
- <4>[ 392.666855] [QT5480]:[qt5480_charger_workaround] Charger disconnected, reverting MEDIAN_FILTER_LENGTH
- <6>[ 392.691074] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 392.721690] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0x10000
- <4>[ 392.722499] RESET handling skipped : Not valid A or B session [GOTGCTL:0x10000]
- <4>[ 392.766066] [FSA9480] control(0x1a) int1(0x2) adc(0x1f) dev1(0x0) dev2(0x0) man1(0x24) man2(0x2) pwr(1)
- <4>[ 392.796058] disconnect, gadget android_adb_ums_acm
- <4>[ 392.796134] s3c_udc_disable: c0658e00
- <4>[ 392.798866] [s3c_udc_power_down] clk_disable() OK.
- <4>[ 392.803695] [FSA9480]fsa9480_s3c_udc_off
- <4>[ 392.803708] [s3c_udc_power_down]
- <6>[ 393.966104] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 393.967506] [FSA9480]get_usb_power_state : usb_power = 0
- <4>[ 393.967592] [FSA9480]fsa9480_interrupt
- <4>[ 394.122461] ### FSA9480 interrupt(110) happened! ###
- <4>[ 394.124379] GPIO_JACK_INT_N value : 0
- <4>[ 394.128200] [FSA9480]mode_switch
- <4>[ 394.128266] [FSA9480]fsa9480_check_usb_connection
- <4>[ 394.132857] [FSA9480] control(0x1e) int1(0x1) adc(0x1f) dev1(0x4) dev2(0x0) man1(0x24) man2(0x0) pwr(0)
- <4>[ 394.246343] [s3c_udc_power_up]
- <4>[ 394.246511] [FSA9480]fsa9480_s3c_udc_on
- <4>[ 394.246574]
- <4>[ 394.250745] [s3c_udc_power_up] clk_enable(otg_clock) OK.
- <4>[ 394.255002]
- <4>[ 394.255049] [s3c_udc_power_up] POWER-UP OK!.
- <4>[ 394.260470] [android_adb_ums_acm] Enumerated as FULL Speed
- <4>[ 394.266207] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 394.266303] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 394.362536] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 394.368075] disconnect, gadget android_adb_ums_acm
- <4>[ 394.428368] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 394.524127] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 394.524981] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 394.531059] disconnect, gadget android_adb_ums_acm
- <4>[ 394.586355] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 394.678465] [android_adb_ums_acm] USB_REQ_SET_ADDRESS (3)
- <4>[ 394.726976] [QT5480]:[qt5480_charger_workaround] Charger connected, changing MEDIAN_FILTER_LENGTH
- <6>[ 394.734634] android_adb_ums_acm gadget: high speed config #1: ACM + UMS + ADB (Debugging mode)
- <4>[ 394.738939] acm_disconnected
- <4>[ 395.231339] #lcd_power_ctrl:0 s
- <4>[ 395.517783] #lcd_power_ctrl:0 e
- <6>[ 395.520375] request_suspend_state: sleep (0->3) at 327444367808 (2011-02-27 09:40:43.128546233 UTC)
- <4>[ 395.524792] [COMPASS] ak8973b_early_suspend
- <6>[ 395.555959] spica-battery spica-battery: cable_timer_func : intr cnt = 3
- <4>[ 395.557151] [FSA9480]get_usb_power_state : usb_power = 1
- <4>[ 395.557162] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 395.563875] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 395.604640] [VIBETONZ] reserved VIBRATOR_DISABLE
- <4>[ 395.672229] [FSA9480]fsa9480_interrupt
- <4>[ 395.672246] ### FSA9480 interrupt(110) happened! ###
- <4>[ 395.675385] GPIO_JACK_INT_N value : 0
- <4>[ 395.679100] [handle_suspend_intr]: config_gadget_driver (5)
- <4>[ 395.684771] [FSA9480]mode_switch
- <4>[ 395.684783] [FSA9480]fsa9480_check_usb_connection
- <4>[ 395.689227]
- <6>[ 395.715959] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 395.744293] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0x10000
- <4>[ 395.745106] RESET handling skipped : Not valid A or B session [GOTGCTL:0x10000]
- <4>[ 395.763462] #s3cfb_early_suspend
- <4>[ 395.811049] [FSA9480] control(0x1a) int1(0x2) adc(0x1f) dev1(0x0) dev2(0x0) man1(0x24) man2(0x2) pwr(1)
- <4>[ 395.841073] disconnect, gadget android_adb_ums_acm
- <4>[ 395.841150] s3c_udc_disable: c0658e00
- <4>[ 395.843875] [s3c_udc_power_down] clk_disable() OK.
- <4>[ 395.848713] [FSA9480]fsa9480_s3c_udc_off
- <4>[ 395.848725] [s3c_udc_power_down]
- <6>[ 396.266250] PM: Syncing filesystems ... done.
- <4>[ 396.306577] Freezing user space processes ... (elapsed 0.07 seconds) done.
- <4>[ 396.377208] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
- <4>[ 396.381445] Suspending console(s) (use no_console_suspend to debug)
- <4>[ 396.389144] [ ak4671.c (ak4671_suspend,824) ]
- <4>[ 396.596976] ############## bma020_accelerometer_suspend
- <6>[ 396.712881] [HEADSET] sec_headset_suspend
- <6>[ 396.726328] [HEADSET] free_send_end_irq
- <6>[ 396.726634] spica-battery spica-battery: s3c_bat_suspend
- <4>[ 396.727041] [s3c_udc_suspend]: System Suspend
- <4>[ 396.727152] [s3c_udc_suspend] USB not enumerated at suspend
- <4>[ 396.727275] [s3c_udc_suspend] dev->powered [0] at suspend
- <4>[ 396.727388] [s3c_udc_suspend] skip~~ s3c_udc_power_down() at suspend
- <4>[ 396.727582] #s3cfb_suspend
- <4>[ 396.727833] [WIFI] sdhci_suspend_host: dhdpm.suspend=NULL
- <7>[ 396.727945] sdhci: ============== REGISTER DUMP ==============
- <7>[ 396.728076] sdhci: Sys addr: 0x00000000 | Version: 0x00000401
- <7>[ 396.728199] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
- <7>[ 396.728322] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
- <7>[ 396.728449] sdhci: Present: 0x01fa0000 | Host ctl: 0x00000000
- <7>[ 396.728572] sdhci: Power: 0x0000000e | Blk gap: 0x00000000
- <7>[ 396.728696] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000
- <7>[ 396.728819] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
- <7>[ 396.728947] sdhci: Int enab: 0x00ff0103 | Sig enab: 0x00ff0103
- <7>[ 396.729071] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
- <7>[ 396.729197] sdhci: Caps: 0x05e80080 | Max curr: 0x00000000
- <7>[ 396.729309] sdhci: ===========================================
- <4>[ 396.729455] ------------[ cut here ]------------
- <4>[ 396.729667] WARNING: at kernel/irq/manage.c:858 __free_irq+0x90/0x1a0()
- <4>[ 396.729794] Trying to free already-free IRQ 107
- <4>[ 396.729883] Modules linked in: param(P) vibrator s3c_g3d s3c_g2d_driver multipdp dpram rfs(P) xsr_stl(P) xsr(P)
- <4>[ 396.730446] [<c01dde98>] (unwind_backtrace+0x0/0xe4) from [<c01f4fa4>] (warn_slowpath_common+0x4c/0x80)
- <4>[ 396.730747] [<c01f4fa4>] (warn_slowpath_common+0x4c/0x80) from [<c01f5014>] (warn_slowpath_fmt+0x28/0x38)
- <4>[ 396.731053] [<c01f5014>] (warn_slowpath_fmt+0x28/0x38) from [<c0221acc>] (__free_irq+0x90/0x1a0)
- <4>[ 396.731346] [<c0221acc>] (__free_irq+0x90/0x1a0) from [<c0221c18>] (free_irq+0x3c/0x5c)
- <4>[ 396.731658] [<c0221c18>] (free_irq+0x3c/0x5c) from [<c03f0a54>] (sdhci_suspend_host+0x78/0xc8)
- <4>[ 396.731980] [<c03f0a54>] (sdhci_suspend_host+0x78/0xc8) from [<c03f0af4>] (sdhci_s3c_suspend+0x18/0x20)
- <4>[ 396.732295] [<c03f0af4>] (sdhci_s3c_suspend+0x18/0x20) from [<c0370814>] (platform_pm_suspend+0x58/0x5c)
- <4>[ 396.732608] [<c0370814>] (platform_pm_suspend+0x58/0x5c) from [<c0372b28>] (pm_op+0x34/0x8c)
- <4>[ 396.732909] [<c0372b28>] (pm_op+0x34/0x8c) from [<c0373414>] (dpm_suspend_start+0x33c/0x4b8)
- <4>[ 396.733219] [<c0373414>] (dpm_suspend_start+0x33c/0x4b8) from [<c021e02c>] (suspend_devices_and_enter+0x3c/0x190)
- <4>[ 396.733520] [<c021e02c>] (suspend_devices_and_enter+0x3c/0x190) from [<c021e240>] (enter_state+0xc0/0xe0)
- <4>[ 396.733800] [<c021e240>] (enter_state+0xc0/0xe0) from [<c021f550>] (suspend+0x58/0x130)
- <4>[ 396.734106] [<c021f550>] (suspend+0x58/0x130) from [<c0205730>] (worker_thread+0x11c/0x1d4)
- <4>[ 396.734402] [<c0205730>] (worker_thread+0x11c/0x1d4) from [<c0208c50>] (kthread+0x7c/0x84)
- <4>[ 396.734695] [<c0208c50>] (kthread+0x7c/0x84) from [<c01d8ec0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 396.734863] ---[ end trace da227214a82491bb ]---
- <4>[ 396.735224] Soni calling mmc_flush_scheduled_work (mmc_suspend_host)
- <7>[ 396.781907] vic_class_suspend: suspending vic at f4000000
- <7>[ 396.781933] vic_class_suspend: suspending vic at f4010000
- <6>[ 396.782047] [HEADSET] get_headset_status headset_status 0
- <6>[ 396.782062] [HEADSET] get_headset_status headset_status 0
- <6>[ 396.782781] check_pmic: OTGI 1.2V (0)
- <6>[ 396.783460] check_pmic: VLED 3.3V (0)
- <6>[ 396.784130] check_pmic: VTF 3.0V (0)
- <6>[ 396.784799] check_pmic: VLCD 1.8V (0)
- <6>[ 396.785468] check_pmic: VLCD 3.0V (0)
- <6>[ 396.786138] check_pmic: OTG 3.3V (0)
- <6>[ 450.976067] s3c6410_pm_enter: WAKEUP_STAT(0x00000001), EINT0PEND(0x00080000)
- <7>[ 450.976092] vic_class_resume: resuming vic at f4000000
- <7>[ 450.976109] vic_class_resume: resuming vic at f4010000
- <4>[ 450.986119] mmc0:mmc_resume_host: excute mmc_detect_change()
- <6>[ 450.986183] sdhci_resume_host: Enabling SDIO Interrupt
- <4>[ 450.986205]
- <4>[ 450.986210] [Jithu] sdhci_resume_host: dhdpm.suspend=NULL
- <6>[ 450.986240] s3c-i2c s3c-i2c.0: slave address 0x10
- <6>[ 450.986258] s3c-i2c s3c-i2c.0: bus frequency set to 378 KHz
- <6>[ 450.986281] s3c-i2c s3c-i2c.1: slave address 0x10
- <6>[ 450.986294] s3c-i2c s3c-i2c.1: bus frequency set to 378 KHz
- <4>[ 450.986326] #s3cfb_resume
- <6>[ 450.990436] wakeup wake lock: s3c-keypad
- <4>[ 450.990493] [s3c_udc_resume]: fsa9480_check_usb_connection
- <4>[ 450.990511] [FSA9480]fsa9480_check_usb_connection
- <4>[ 450.990518]
- <7>[ 451.024102] *** DEBUG : First we search for SDIO...(0)***
- <7>[ 451.024972] *** DEBUG : ...then normal SD...(0) ***
- <7>[ 451.026077] *** DEBUG : ...and finally MMC. (0)***
- <4>[ 451.130361] [FSA9480] control(0x1e) int1(0x0) adc(0x1f) dev1(0x0) dev2(0x0) man1(0x24) man2(0x0) pwr(0)
- <4>[ 451.130550] [FSA9480] AUTO MODE.. d1:0x00, d2:0x00
- <4>[ 451.130748] domain v ready : 0x79
- <4>[ 451.140332] domain v ready : 0x7B
- <6>[ 451.154580] spica-battery spica-battery: s3c_bat_resume
- <6>[ 451.154886] s3c-rtc s3c-rtc: rtc disabled, re-enabling
- <4>[ 451.155008] s3c_rtc_resume
- <6>[ 451.155310] [HEADSET] sec_headset_resume
- <7>[ 451.155926] s3c64xx_clk_doutmpll_get_rate: parent is 266000000
- <7>[ 451.156074] s3c64xx_clk_doutmpll_get_rate: parent is 266000000
- <7>[ 451.156279] s3c64xx_clk_doutmpll_get_rate: parent is 266000000
- <7>[ 451.156723] s3c64xx_clk_doutmpll_get_rate: parent is 266000000
- <7>[ 451.156870] s3c64xx_clk_doutmpll_get_rate: parent is 266000000
- <7>[ 451.157060] s3c64xx_clk_doutmpll_get_rate: parent is 266000000
- <4>[ 451.166350] @@@@ bma020_accelerometer_resume
- <4>[ 451.169170] [FSA9480]get_usb_power_state : usb_power = 0
- <4>[ 451.169268] [FSA9480]fsa9480_interrupt
- <4>[ 451.598981] ### FSA9480 interrupt(110) happened! ###
- <4>[ 451.599141] GPIO_JACK_INT_N value : 0
- <4>[ 451.609979] Restarting tasks ... [FSA9480]mode_switch
- <4>[ 451.667534] [FSA9480]fsa9480_check_usb_connection
- <4>[ 451.667577] done.
- <4>[ 451.805424] [FSA9480] control(0x1e) int1(0x1) adc(0x1f) dev1(0x4) dev2(0x0) man1(0x24) man2(0x0) pwr(0)
- <4>[ 451.835410] [s3c_udc_power_up]
- <4>[ 451.835603] [FSA9480]fsa9480_s3c_udc_on
- <4>[ 451.835675]
- <4>[ 451.841669] [s3c_udc_power_up] clk_enable(otg_clock) OK.
- <4>[ 451.844491]
- <4>[ 451.844534] [s3c_udc_power_up] POWER-UP OK!.
- <4>[ 451.849822] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 451.849935]
- <6>[ 451.857845] [HEADSET] sendend_switch_change headset_state : 0, state : 1
- <6>[ 451.864596] [HEADSET] sendend_switch_change >> Not connected : Pressed
- <4>[ 451.871303] [ ak4671.c (ak4671_resume,855) ]
- <6>[ 451.876192] suspend: exit suspend, ret = 0 (2011-02-27 09:40:45.290266028 UTC)
- <6>[ 451.986057] request_suspend_state: wakeup (3->0) at 329716036875 (2011-02-27 09:40:45.400226041 UTC)
- <4>[ 451.989837] #s3cfb_late_resume
- <4>[ 452.008528] #lcd_power_ctrl:1 s
- <4>[ 452.085136] [COMPASS] ak8973b_late_resume
- <4>[ 452.390108] #lcd_power_ctrl:1 e
- <4>[ 454.576197] [FSA9480]fsa9480_interrupt
- <4>[ 454.576279] ### FSA9480 interrupt(110) happened! ###
- <4>[ 454.579483] GPIO_JACK_INT_N value : 0
- <4>[ 454.585583] [FSA9480]mode_switch
- <4>[ 454.585662] [FSA9480]fsa9480_check_usb_connection
- <4>[ 454.587760]
- <6>[ 454.620086] spica-battery spica-battery: cable_timer_func : intr cnt = 2
- <4>[ 454.690248] [FSA9480] control(0x1a) int1(0x2) adc(0x1f) dev1(0x0) dev2(0x0) man1(0x24) man2(0x2) pwr(1)
- <4>[ 454.740155] s3c_udc_disable: c0658e00
- <4>[ 454.740197] [s3c_udc_power_down] clk_disable() OK.
- <4>[ 454.742958] [FSA9480]fsa9480_s3c_udc_off
- <4>[ 454.742964] [s3c_udc_power_down]
- <6>[ 454.965045] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 454.966164] [FSA9480]get_usb_power_state : usb_power = 0
- <4>[ 454.966173]
- <6>[ 455.395216] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <6>[ 455.920229] spica-battery spica-battery: cable_timer_func : intr cnt = 2
- <4>[ 456.086266] [QT5480]:[qt5480_charger_workaround] Charger disconnected, reverting MEDIAN_FILTER_LENGTH
- <4>[ 456.135127] [FSA9480]fsa9480_interrupt
- <4>[ 456.135210] ### FSA9480 interrupt(110) happened! ###
- <4>[ 456.138407] GPIO_JACK_INT_N value : 0
- <4>[ 456.142269] [FSA9480]mode_switch
- <4>[ 456.142334] [FSA9480]fsa9480_check_usb_connection
- <4>[ 456.146884]
- <6>[ 456.190177] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 456.230462] [FSA9480] control(0x1e) int1(0x1) adc(0x1f) dev1(0x4) dev2(0x0) man1(0x24) man2(0x0) pwr(0)
- <4>[ 456.260380] [s3c_udc_power_up]
- <4>[ 456.260552] [FSA9480]fsa9480_s3c_udc_on
- <4>[ 456.260616]
- <4>[ 456.264798] [s3c_udc_power_up] clk_enable(otg_clock) OK.
- <4>[ 456.268975] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0x10000
- <4>[ 456.275077] RESET handling skipped : Not valid A or B session [GOTGCTL:0x10000]
- <4>[ 456.283182] [android_adb_ums_acm] Enumerated as FULL Speed
- <4>[ 456.288875]
- <4>[ 456.288923] [s3c_udc_power_up] POWER-UP OK!.
- <4>[ 456.294465] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 456.294561] [FSA9480]get_usb_power_state : usb_power = 1
- <4>[ 456.302483] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 456.307835] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 456.377419] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 456.382953] disconnect, gadget android_adb_ums_acm
- <4>[ 456.387831] [s3c_ep_queue] EP[0]: Queueing USB_SPEED_UNKNOWN state
- <4>[ 456.393875] [s3c_ep0_setup] gadget setup FAILED (stalling EP 0), setup returned -108
- <4>[ 456.443254] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 456.487872] [FSA9480]fsa9480_interrupt
- <4>[ 456.487901] ### FSA9480 interrupt(110) happened! ###
- <4>[ 456.491050] GPIO_JACK_INT_N value : 0
- <4>[ 456.494802] [handle_suspend_intr]: USB Bus Suspend (DSTS):0x135c01
- <4>[ 456.500856] disconnect, gadget android_adb_ums_acm
- <4>[ 456.511356] [FSA9480]mode_switch
- <4>[ 456.511380] [FSA9480]fsa9480_check_usb_connection
- <4>[ 456.511448]
- <6>[ 456.530101] spica-battery spica-battery: cable_timer_func : intr cnt = 2
- <4>[ 456.559633] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0x10000
- <4>[ 456.560467] RESET handling skipped : Not valid A or B session [GOTGCTL:0x10000]
- <4>[ 456.605166] [FSA9480] control(0x1a) int1(0x2) adc(0x1f) dev1(0x0) dev2(0x0) man1(0x24) man2(0x2) pwr(1)
- <4>[ 456.630527] s3c_udc_disable: c0658e00
- <4>[ 456.630569] [s3c_udc_power_down] clk_disable() OK.
- <4>[ 456.633325] [FSA9480]fsa9480_s3c_udc_off
- <4>[ 456.633331] [s3c_udc_power_down]
- <4>[ 458.268511] [FSA9480]fsa9480_interrupt
- <4>[ 458.268599] ### FSA9480 interrupt(110) happened! ###
- <4>[ 458.271801] GPIO_JACK_INT_N value : 0
- <4>[ 458.275717] [FSA9480]mode_switch
- <4>[ 458.275784] [FSA9480]fsa9480_check_usb_connection
- <4>[ 458.280360] [FSA9480] control(0x1e) int1(0x1) adc(0x1f) dev1(0x4) dev2(0x0) man1(0x24) man2(0x0) pwr(0)
- <6>[ 458.370192] spica-battery spica-battery: cable_timer_func : intr cnt = 1
- <4>[ 458.374805] [FSA9480]get_usb_power_state : usb_power = 0
- <4>[ 458.374888] [s3c_udc_power_up]
- <4>[ 458.400482] [FSA9480]fsa9480_s3c_udc_on
- <4>[ 458.400566]
- <4>[ 458.403436] [s3c_udc_power_up] clk_enable(otg_clock) OK.
- <4>[ 458.407692]
- <4>[ 458.407744] [s3c_udc_power_up] POWER-UP OK!.
- <4>[ 458.413165] [android_adb_ums_acm] Enumerated as FULL Speed
- <4>[ 458.431896] [FSA9480]get_usb_power_state : usb_power=1,taconnection=0
- <4>[ 458.431913] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 458.515438] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 458.520975] disconnect, gadget android_adb_ums_acm
- <4>[ 458.581365] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 458.677157] [handle_reset_intr] : Reset interrupt - (GOTGCTL):0xd0000
- <4>[ 458.678093] ===> OTG core got reset & execute s3c_udc_reset()
- <4>[ 458.684178] disconnect, gadget android_adb_ums_acm
- <4>[ 458.739346] [android_adb_ums_acm] Enumerated as HIGH Speed
- <4>[ 458.831469] [android_adb_ums_acm] USB_REQ_SET_ADDRESS (3)
- <6>[ 459.003176] android_adb_ums_acm gadget: high speed config #1: ACM + UMS + ADB (Debugging mode)
- <4>[ 459.006354] acm_disconnected
- <4>[ 460.086264] [QT5480]:[qt5480_charger_workaround] Charger connected, changing MEDIAN_FILTER_LENGTH
- <4>[ 467.076196] #lcd_power_ctrl:0 s
- <4>[ 467.361977] #lcd_power_ctrl:0 e
- <6>[ 467.364562] request_suspend_state: sleep (0->3) at 345094435743 (2011-02-27 09:41:00.778614813 UTC)
- <4>[ 467.368975] [COMPASS] ak8973b_early_suspend
- <4>[ 467.454901] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 467.455523] [VIBETONZ] reserved VIBRATOR_DISABLE
- <4>[ 467.475152] #s3cfb_early_suspend
- <6>[ 474.244901] request_suspend_state: wakeup (3->0) at 351974765084 (2011-02-27 09:41:07.658943660 UTC)
- <4>[ 474.249007] #s3cfb_late_resume
- <4>[ 474.279171] #lcd_power_ctrl:1 s
- <4>[ 474.312340] [COMPASS] ak8973b_late_resume
- <4>[ 474.670319] #lcd_power_ctrl:1 e
- <4>[ 478.375646] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 478.376353] [VIBETONZ] reserved VIBRATOR_DISABLE
- <4>[ 478.399561] [VIBETONZ] enable_vibetonz_from_user : time = 30 msec
- <4>[ 478.405635] [VIBETONZ] reserved VIBRATOR_ENABLE
- <4>[ 478.430365] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 478.431004] [VIBETONZ] reserved VIBRATOR_DISABLE
- <4>[ 478.561426] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 478.561933] [VIBETONZ] reserved VIBRATOR_DISABLE
- <4>[ 478.566936] [VIBETONZ] enable_vibetonz_from_user : time = 40 msec
- <4>[ 478.574817] [VIBETONZ] reserved VIBRATOR_ENABLE
- <4>[ 478.612844] [VIBETONZ] reserved VIBRATOR_DISABLE
- <4>[ 478.620343] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 478.621048] [VIBETONZ] reserved VIBRATOR_DISABLE
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement