API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 30th, 2016
280
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.19 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47269) ) #1 Sun Jan 31 14:39:33 CET 2016
  2. [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
  5. [ 0.000000] MIPS: machine is D-Link DIR-300 B7
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Zone ranges:
  10. [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
  14. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
  15. [ 0.000000] On node 0 totalpages: 8192
  16. [ 0.000000] free_area_init_node: node 0, pgdat 802f6290, node_mem_map 81000000
  17. [ 0.000000] Normal zone: 64 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
  20. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  21. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  25. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  26. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  29. [ 0.000000] Writing ErrCtl register=00023f00
  30. [ 0.000000] Readback ErrCtl register=00023f00
  31. [ 0.000000] Memory: 28948K/32768K available (2508K kernel code, 119K rwdata, 492K rodata, 136K init, 185K bss, 3820K reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:256
  34. [ 0.000000] CPU Clock: 360MHz
  35. [ 0.000000] systick: running - mult: 214748, shift: 32
  36. [ 0.010000] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
  37. [ 0.080000] pid_max: default: 32768 minimum: 301
  38. [ 0.090000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  39. [ 0.100000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [ 0.110000] pinctrl core: initialized pinctrl subsystem
  41. [ 0.120000] NET: Registered protocol family 16
  42. [ 0.130000] rt2880-pinmux pinctrl: try to register 28 pins ...
  43. [ 0.130000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
  44. [ 0.130000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
  45. [ 0.130000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
  46. [ 0.130000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
  47. [ 0.130000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
  48. [ 0.130000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
  49. [ 0.130000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
  50. [ 0.130000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
  51. [ 0.130000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
  52. [ 0.130000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
  53. [ 0.130000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
  54. [ 0.130000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
  55. [ 0.130000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
  56. [ 0.130000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
  57. [ 0.130000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
  58. [ 0.130000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
  59. [ 0.130000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
  60. [ 0.130000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
  61. [ 0.130000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
  62. [ 0.130000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
  63. [ 0.130000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
  64. [ 0.130000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
  65. [ 0.130000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
  66. [ 0.130000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
  67. [ 0.130000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
  68. [ 0.130000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
  69. [ 0.130000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
  70. [ 0.130000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
  71. [ 0.130000] pinctrl core: add 5 pinmux maps
  72. [ 0.130000] rt2880-pinmux pinctrl: found group selector 0 for i2c
  73. [ 0.130000] rt2880-pinmux pinctrl: found group selector 4 for jtag
  74. [ 0.130000] rt2880-pinmux pinctrl: invalid group "rgmii" for function "gpio"
  75. [ 0.140000] rt2880-pinmux pinctrl: invalid group "mdio" for function "gpio"
  76. [ 0.150000] rt2880-pinmux pinctrl: found group selector 2 for uartf
  77. [ 0.150000] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl
  78. [ 0.150000] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl
  79. [ 0.150000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
  80. [ 0.150000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
  81. [ 0.150000] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl
  82. [ 0.150000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
  83. [ 0.150000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
  84. [ 0.150000] rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl
  85. [ 0.150000] rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl
  86. [ 0.150000] rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl
  87. [ 0.150000] rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl
  88. [ 0.150000] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
  89. [ 0.150000] rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl
  90. [ 0.150000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
  91. [ 0.150000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
  92. [ 0.150000] rt2880-pinmux pinctrl: failed to lookup the sleep state
  93. [ 0.160000] rt2880_gpio 10000600.gpio: registering 22 gpios
  94. [ 0.170000] rt2880_gpio 10000600.gpio: registering 22 irq handlers
  95. [ 0.180000] Switched to clocksource systick
  96. [ 0.190000] NET: Registered protocol family 2
  97. [ 0.200000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  98. [ 0.210000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  99. [ 0.220000] TCP: Hash tables configured (established 1024 bind 1024)
  100. [ 0.240000] TCP: reno registered
  101. [ 0.240000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  102. [ 0.250000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  103. [ 0.270000] NET: Registered protocol family 1
  104. [ 0.280000] rt-timer 10000100.timer: maximum frequency is 7324Hz
  105. [ 0.290000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
  106. [ 0.290000] futex hash table entries: 256 (order: -1, 3072 bytes)
  107. [ 0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  108. [ 0.330000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  109. [ 0.350000] msgmni has been set to 56
  110. [ 0.360000] io scheduler noop registered
  111. [ 0.370000] io scheduler deadline registered (default)
  112. [ 0.380000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  113. [ 0.400000] serial8250 serial8250: no of_node; not parsing pinctrl DT
  114. [ 0.400000] pinctrl core: add 1 pinmux maps
  115. [ 0.400000] rt2880-pinmux pinctrl: found group selector 3 for uartlite
  116. [ 0.400000] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite
  117. [ 0.400000] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite
  118. [ 0.400000] console [ttyS0] disabled
  119. [ 0.410000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
  120. [ 0.420000] console [ttyS0] enabled
  121. [ 0.440000] bootconsole [early0] disabled
  122. [ 0.460000] pinctrl core: add 1 pinmux maps
  123. [ 0.460000] pinctrl core: add 1 pinmux maps
  124. [ 0.460000] rt2880-pinmux pinctrl: found group selector 1 for spi
  125. [ 0.460000] rt2880-pinmux pinctrl: found group selector 6 for spi_cs1
  126. [ 0.460000] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi
  127. [ 0.460000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi
  128. [ 0.460000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi
  129. [ 0.460000] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
  130. [ 0.460000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10000b00.spi
  131. [ 0.530000] m25p80 spi32766.0: found mx25l3205d, expected s25fl064k
  132. [ 0.540000] m25p80 spi32766.0: mx25l3205d (4096 Kbytes)
  133. [ 0.550000] 4 ofpart partitions found on MTD device spi32766.0
  134. [ 0.560000] Creating 4 MTD partitions on "spi32766.0":
  135. [ 0.570000] 0x000000000000-0x000000030000 : "u-boot"
  136. [ 0.580000] 0x000000030000-0x000000040000 : "u-boot-env"
  137. [ 0.600000] 0x000000040000-0x000000050000 : "factory"
  138. [ 0.610000] 0x000000050000-0x000000800000 : "firmware"
  139. [ 0.620000] mtd: partition "firmware" extends beyond the end of device "spi32766.0" -- size truncated to 0x3b0000
  140. [ 0.670000] 2 uimage-fw partitions found on MTD device firmware
  141. [ 0.690000] 0x000000050000-0x000000162b47 : "kernel"
  142. [ 0.700000] 0x000000162b47-0x000000400000 : "rootfs"
  143. [ 0.710000] mtd: device 5 (rootfs) set to be root filesystem
  144. [ 0.720000] 1 squashfs-split partitions found on MTD device rootfs
  145. [ 0.730000] 0x000000390000-0x000000400000 : "rootfs_data"
  146. [ 0.750000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
  147. [ 0.770000] rt2880_wdt 10000120.watchdog: Initialized
  148. [ 0.780000] TCP: cubic registered
  149. [ 0.790000] NET: Registered protocol family 17
  150. [ 0.800000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  151. [ 0.820000] Bridge firewalling registered
  152. [ 0.830000] 8021q: 802.1Q VLAN Support v1.8
  153. [ 0.880000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  154. [ 0.900000] Freeing unused kernel memory: 136K (8030e000 - 80330000)
  155. [ 3.810000] init: Console is alive
  156. [ 3.810000] init: - watchdog -
  157. [ 6.770000] usbcore: registered new interface driver usbfs
  158. [ 6.780000] usbcore: registered new interface driver hub
  159. [ 6.790000] usbcore: registered new device driver usb
  160. [ 6.820000] rt2880-pinmux pinctrl: request pin 9 (io9) for pio:9
  161. [ 6.820000] rt2880-pinmux pinctrl: request pin 13 (io13) for pio:13
  162. [ 6.860000] init: - preinit -
  163. [ 8.290000] rt305x-esw 10110000.esw: link changed 0x00
  164. [ 8.620000] random: mktemp urandom read with 13 bits of entropy available
  165. [ 9.860000] rt305x-esw 10110000.esw: link changed 0x08
  166. [ 12.000000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  167. [ 12.060000] procd: - early -
  168. [ 12.060000] procd: - watchdog -
  169. [ 13.250000] procd: - ubus -
  170. [ 14.260000] procd: - init -
  171. [ 15.570000] NET: Registered protocol family 10
  172. [ 15.590000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  173. [ 15.630000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
  174. [ 15.650000] Backport generated by backports.git backports-20150129-0-gdd4a670
  175. [ 15.670000] ip_tables: (C) 2000-2006 Netfilter Core Team
  176. [ 15.700000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
  177. [ 15.780000] xt_time: kernel timezone is -0000
  178. [ 15.840000] cfg80211: Calling CRDA to update world regulatory domain
  179. [ 15.870000] cfg80211: World regulatory domain updated:
  180. [ 15.880000] cfg80211: DFS Master region: unset
  181. [ 15.890000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  182. [ 15.910000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  183. [ 15.920000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  184. [ 15.940000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  185. [ 15.960000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  186. [ 15.970000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  187. [ 15.990000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  188. [ 16.010000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  189. [ 16.030000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  190. [ 16.150000] PPP generic driver version 2.4.2
  191. [ 16.170000] NET: Registered protocol family 24
  192. [ 16.230000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected
  193. [ 16.240000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected
  194. [ 16.260000] ------------[ cut here ]------------
  195. [ 16.270000] WARNING: CPU: 0 PID: 517 at /home/buildbot/slave-local/ramips_rt305x/build/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_rt305x/compat-wireless-2015-03-09/drivers/net/wireless/rt2x00/rt2800lib.c:427 rt2800_vco_calibration+0x36c/0x3dc [rt2800lib]()
  196. [ 16.310000] phy0: invalid access of EEPROM word 38
  197. [ 16.320000] Modules linked in: rt2800soc(+) rt2800mmio rt2800lib pppoe ppp_async iptable_nat rt2x00soc rt2x00mmio rt2x00lib pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_id xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_itu_t crc_ccitt compat ledtrig_usbdev ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ipv6 eeprom_93cx6 arc4 crypto_blkcipher leds_gpio dwc2_platform dwc2 gpio_button_hotplug usbcore nls_base usb_common
  198. [ 16.470000] CPU: 0 PID: 517 Comm: kmodloader Not tainted 3.18.23 #1
  199. [ 16.490000] Stack : 00000000 00000000 00000000 00000000 803341f2 00000037 00000000 80d22738
  200. [ 16.490000] 00000001 80d0d660 802a40c8 802f6b83 00000205 8033341c 818a6430 80d0d660
  201. [ 16.490000] 80d3788c 00000017 00000000 80046f0c 00000003 80023eb8 000001ab 80d0d660
  202. [ 16.490000] 802a75dc 81bdbb1c 00000000 00000000 00000000 00000000 00000000 00000000
  203. [ 16.490000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  204. [ 16.490000] ...
  205. [ 16.560000] Call Trace:
  206. [ 16.560000] [<80013cf8>] show_stack+0x50/0x84
  207. [ 16.570000] [<80023fc0>] warn_slowpath_common+0x84/0xb4
  208. [ 16.580000] [<8002401c>] warn_slowpath_fmt+0x2c/0x38
  209. [ 16.590000] [<80d22738>] rt2800_vco_calibration+0x36c/0x3dc [rt2800lib]
  210. [ 16.600000] [<80d23048>] rt2800_process_rxwi+0x8a0/0x8fc [rt2800lib]
  211. [ 16.620000]
  212. [ 16.620000] ---[ end trace 6b7057c91a9a3170 ]---
  213. [ 16.630000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  214. [ 23.410000] rt305x-esw 10110000.esw: link changed 0x00
  215. [ 25.010000] rt305x-esw 10110000.esw: link changed 0x08
  216. [ 28.690000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  217. [ 28.700000] jffs2_build_filesystem(): unlocking the mtd device... done.
  218. [ 28.710000] jffs2_build_filesystem(): erasing all blocks after the end marker...
  219. [ 33.470000] device eth0.1 entered promiscuous mode
  220. [ 33.480000] device eth0 entered promiscuous mode
  221. [ 33.570000] br-lan: port 1(eth0.1) entered forwarding state
  222. [ 33.580000] br-lan: port 1(eth0.1) entered forwarding state
  223. [ 34.070000] done.
  224. [ 34.070000] jffs2: notice: (918) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  225. [ 35.580000] br-lan: port 1(eth0.1) entered forwarding state
  226. [ 77.670000] random: nonblocking pool is initialized
  227. [ 87.460000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  228. [ 87.480000] device wlan0 entered promiscuous mode
  229. [ 87.540000] br-lan: port 2(wlan0) entered forwarding state
  230. [ 87.550000] br-lan: port 2(wlan0) entered forwarding state
  231. [ 87.560000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  232. [ 89.550000] br-lan: port 2(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!