Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.39 2008-10-24 22:33 [i686-suse-linux-gnu] (openSUSE RPM)
- Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Fujitsu MHV series
- Device Model: FUJITSU MHV2060BH
- Serial Number: NW14T672BM8H
- Firmware Version: 892C
- User Capacity: 60.022.480.896 bytes
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 7
- ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
- Local Time is: Fri Apr 19 15:43:55 2013 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 351) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 41) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 100 052 046 Pre-fail Always - 156516
- 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 18350080
- 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
- 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 9132
- 5 Reallocated_Sector_Ct 0x0033 095 095 024 Pre-fail Always - 225 (1860, 140)
- 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2229
- 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
- 9 Power_On_Seconds 0x0032 098 098 000 Old_age Always - 1485h+53m+53s
- 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 801
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 41
- 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 23603
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 40 (Lifetime Min/Max 13/47)
- 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 66
- 196 Reallocated_Event_Count 0x0032 095 095 000 Old_age Always - 225 (16, 6775)
- 197 Current_Pending_Sector 0x0012 091 091 000 Old_age Always - 10
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 2125
- 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 2632802173772
- 240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 8386 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 8386 occurred at disk power-on lifetime: 1482 hours (61 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 c5 b2 df 8e e4 Error: UNC 197 sectors at LBA = 0x048edfb2 = 76472242
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 77 df 8e e4 00 00:42:49.390 READ DMA
- ec 00 00 00 00 00 a0 00 00:42:49.348 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:42:49.340 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 00:42:49.335 IDENTIFY DEVICE
- c8 00 00 77 df 8e e4 00 00:42:44.571 READ DMA
- Error 8385 occurred at disk power-on lifetime: 1482 hours (61 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 c5 b2 df 8e e4 Error: UNC 197 sectors at LBA = 0x048edfb2 = 76472242
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 77 df 8e e4 00 00:42:44.571 READ DMA
- ec 00 00 00 00 00 a0 00 00:42:44.528 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:42:44.520 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 00:42:44.515 IDENTIFY DEVICE
- c8 00 00 77 df 8e e4 00 00:42:39.871 READ DMA
- Error 8384 occurred at disk power-on lifetime: 1482 hours (61 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 c5 b2 df 8e e4 Error: UNC 197 sectors at LBA = 0x048edfb2 = 76472242
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 77 df 8e e4 00 00:42:39.871 READ DMA
- ec 00 00 00 00 00 a0 00 00:42:39.828 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:42:39.820 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 00:42:39.815 IDENTIFY DEVICE
- c8 00 00 77 df 8e e4 00 00:42:35.183 READ DMA
- Error 8383 occurred at disk power-on lifetime: 1482 hours (61 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 c5 b2 df 8e e4 Error: UNC 197 sectors at LBA = 0x048edfb2 = 76472242
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 77 df 8e e4 00 00:42:35.183 READ DMA
- ec 00 00 00 00 00 a0 00 00:42:35.140 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:42:35.132 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 00:42:35.126 IDENTIFY DEVICE
- c8 00 00 77 df 8e e4 00 00:42:30.483 READ DMA
- Error 8382 occurred at disk power-on lifetime: 1482 hours (61 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 c5 b2 df 8e e4 Error: UNC 197 sectors at LBA = 0x048edfb2 = 76472242
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 77 df 8e e4 00 00:42:30.483 READ DMA
- ec 00 00 00 00 00 a0 00 00:42:30.440 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 00 00:42:30.432 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 00:42:30.426 IDENTIFY DEVICE
- c8 00 00 77 df 8e e4 00 00:42:25.861 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 1145 76472242
- # 2 Short offline Completed without error 00% 3 -
- # 3 Short offline Completed without error 00% 3 -
- # 4 Short offline Completed without error 00% 3 -
- # 5 Short offline Completed without error 00% 2 -
- # 6 Short offline Completed without error 00% 2 -
- # 7 Short offline Completed without error 00% 2 -
- # 8 Short offline Completed without error 00% 1 -
- # 9 Short offline Completed without error 00% 1 -
- #10 Short offline Completed without error 00% 1 -
- #11 Short offline Completed without error 00% 0 -
- #12 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement