Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.3.5-gentoo (root@asus) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #5 SMP Wed May 16 15:38:30 BST 2012
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
- [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
- [ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffaf000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000bffaf000 - 00000000bffe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
- [ 0.000000] DMI 2.5 present.
- [ 0.000000] DMI: ASUSTeK Computer Inc. G50V /G50V , BIOS 213 04/21/2009
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F00000000 write-back
- [ 0.000000] 1 base 100000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] found SMP MP-table at [c00ff780] ff780
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- [ 0.000000] ACPI: RSDP 000f9500 00024 (v02 ACPIAM)
- [ 0.000000] ACPI: XSDT bffa0100 0007C (v01 042109 XSDT1057 20090421 MSFT 00000097)
- [ 0.000000] ACPI: FACP bffa0290 000F4 (v03 042109 FACP1057 20090421 MSFT 00000097)
- [ 0.000000] ACPI: DSDT bffa0690 0B845 (v01 G50V0 G50V0100 00000100 INTL 20051117)
- [ 0.000000] ACPI: FACS bffaf000 00040
- [ 0.000000] ACPI: APIC bffa0390 0006C (v01 042109 APIC1057 20090421 MSFT 00000097)
- [ 0.000000] ACPI: MCFG bffa0440 0003C (v01 042109 OEMMCFG 20090421 MSFT 00000097)
- [ 0.000000] ACPI: OEMX bffa0480 00176 (v01 042109 OEMX1057 20090421 MSFT 00000097)
- [ 0.000000] ACPI: ECDT bffa0630 00054 (v01 042109 OEMECDT 20090421 MSFT 00000097)
- [ 0.000000] ACPI: DBGP bffa0400 00034 (v01 042109 DBGP1057 20090421 MSFT 00000097)
- [ 0.000000] ACPI: BOOT bffa0600 00028 (v01 042109 BOOT1057 20090421 MSFT 00000097)
- [ 0.000000] ACPI: OEMB bffaf040 00071 (v01 042109 OEMB1057 20090421 MSFT 00000097)
- [ 0.000000] ACPI: HPET bffabee0 00038 (v01 042109 OEMHPET 20090421 MSFT 00000097)
- [ 0.000000] ACPI: ATKG bffaf2c0 08024 (v01 042109 OEMATKG 20090421 MSFT 00000097)
- [ 0.000000] ACPI: SSDT bffb7e10 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2183MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000bffa0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] Early memory PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009e
- [ 0.000000] 0: 0x00000100 -> 0x000bffa0
- [ 0.000000] On node 0 totalpages: 786222
- [ 0.000000] free_area_init_node: node 0, pgdat c1770b40, node_mem_map f5ffd200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4368 pages used for memmap
- [ 0.000000] HighMem zone: 554642 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
- [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s29696 r0 d23552 u1048576
- [ 0.000000] pcpu-alloc: s29696 r0 d23552 u1048576 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780078
- [ 0.000000] Kernel command line: root=/dev/sda2 real_root=/dev/sda2
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000bffa0)
- [ 0.000000] Memory: 3110404k/3145344k available (5636k kernel code, 34484k reserved, 2022k data, 436k init, 2236040k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc177b000 - 0xc17e8000 ( 436 kB)
- [ 0.000000] .data : 0xc1581326 - 0xc177ac80 (2022 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1581326 (5636 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
- [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2260.938 MHz processor.
- [ 0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.87 BogoMIPS (lpj=2260938)
- [ 0.002003] pid_max: default: 32768 minimum: 301
- [ 0.002271] Security Framework initialized
- [ 0.002521] SELinux: Initializing.
- [ 0.002780] SELinux: Starting in permissive mode
- [ 0.002792] Mount-cache hash table entries: 512
- [ 0.003115] Initializing cgroup subsys cpuacct
- [ 0.003365] Initializing cgroup subsys freezer
- [ 0.003632] CPU: Physical Processor ID: 0
- [ 0.003881] CPU: Processor Core ID: 0
- [ 0.004003] mce: CPU supports 6 MCE banks
- [ 0.004257] CPU0: Thermal monitoring enabled (TM2)
- [ 0.004507] using mwait in idle threads.
- [ 0.005035] ACPI: Core revision 20120111
- [ 0.011042] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.011674] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.021416] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
- [ 0.022998] APIC calibration not consistent with PM-Timer: 139ms instead of 100ms
- [ 0.022998] APIC delta adjusted to PM-Timer: 1662495 (2327472)
- [ 0.022998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
- [ 0.022998] ... version: 2
- [ 0.022999] ... bit width: 40
- [ 0.023248] ... generic registers: 2
- [ 0.023496] ... value mask: 000000ffffffffff
- [ 0.023745] ... max period: 000000007fffffff
- [ 0.023999] ... fixed-purpose events: 3
- [ 0.024247] ... event mask: 0000000700000003
- [ 0.024663] CPU 1 irqstacks, hard=f5498000 soft=f549a000
- [ 0.024665] Booting Node 0, Processors #1
- [ 0.025000] smpboot cpu 1: start_ip = 9a000
- [ 0.001999] Initializing CPU#1
- [ 0.037010] Brought up 2 CPUs
- [ 0.037507] Total of 2 processors activated (9043.75 BogoMIPS).
- [ 0.040035] devtmpfs: initialized
- [ 0.040117] PM: Registering ACPI NVS region at bffaf000 (200704 bytes)
- [ 0.040384] RTC time: 10:41:13, date: 07/07/12
- [ 0.041036] NET: Registered protocol family 16
- [ 0.041301] kworker/u:0 used greatest stack depth: 6960 bytes left
- [ 0.042013] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.042357] ACPI: bus type pci registered
- [ 0.042613] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.042999] PCI: not using MMCONFIG
- [ 0.043445] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
- [ 0.043696] PCI: Using configuration type 1 for base access
- [ 0.052028] bio: create slab <bio-0> at 0
- [ 0.052303] ACPI: Added _OSI(Module Device)
- [ 0.052303] ACPI: Added _OSI(Processor Device)
- [ 0.052521] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.053017] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.055286] ACPI: EC: EC description table is found, configuring boot EC
- [ 0.055541] ACPI: EC: Look up EC in DSDT
- [ 0.057383] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.060064] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.061112] ACPI Warning: Incorrect checksum in table [ATKG] - 0xC8, should be 0xDD (20120111/tbutils-321)
- [ 0.062494] ACPI: SSDT bffb73c0 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.063627] ACPI: Dynamic OEM Table Load:
- [ 0.064253] ACPI: SSDT (null) 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.065112] ACPI: SSDT bffb76a0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.066157] ACPI: Dynamic OEM Table Load:
- [ 0.066735] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.067478] ACPI: SSDT bffb72f0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
- [ 0.068621] ACPI: Dynamic OEM Table Load:
- [ 0.069241] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
- [ 0.070076] ACPI: SSDT bffb7610 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
- [ 0.071121] ACPI: Dynamic OEM Table Load:
- [ 0.071699] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
- [ 0.072439] ACPI: Interpreter enabled
- [ 0.072705] ACPI: (supports S0 S3 S4 S5)
- [ 0.073767] ACPI: Using IOAPIC for interrupt routing
- [ 0.074021] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.075009] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.075994] PCI: Using MMCONFIG for extended config space
- [ 0.088155] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
- [ 0.089243] ACPI: No dock devices found.
- [ 0.089499] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.090107] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.090507] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.090758] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.090994] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.091330] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
- [ 0.091660] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
- [ 0.092027] PCI host bridge to bus 0000:00
- [ 0.092256] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.092520] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.092783] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.093011] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
- [ 0.093262] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
- [ 0.093522] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
- [ 0.093566] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
- [ 0.093608] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.093665] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
- [ 0.093728] pci 0000:00:1a.0: reg 20: [io 0xbc00-0xbc1f]
- [ 0.093803] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
- [ 0.093866] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
- [ 0.094044] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
- [ 0.094107] pci 0000:00:1a.2: reg 20: [io 0xb800-0xb81f]
- [ 0.094194] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
- [ 0.094221] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
- [ 0.094343] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.094379] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
- [ 0.094402] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
- [ 0.094510] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.094540] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
- [ 0.094651] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.094684] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
- [ 0.094795] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.094828] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
- [ 0.094941] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.094978] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
- [ 0.095092] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.095127] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
- [ 0.095190] pci 0000:00:1d.0: reg 20: [io 0xb480-0xb49f]
- [ 0.095265] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
- [ 0.095328] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
- [ 0.095403] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
- [ 0.095465] pci 0000:00:1d.2: reg 20: [io 0xb080-0xb09f]
- [ 0.095552] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
- [ 0.095580] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
- [ 0.095701] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.095730] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- [ 0.095826] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
- [ 0.095993] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
- [ 0.096022] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
- [ 0.096034] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
- [ 0.096046] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
- [ 0.096058] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
- [ 0.096070] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa49f]
- [ 0.096082] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
- [ 0.096157] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.096249] pci 0000:01:00.0: [10de:064a] type 0 class 0x000300
- [ 0.096274] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
- [ 0.096299] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.096324] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
- [ 0.096342] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
- [ 0.096361] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
- [ 0.098023] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.098281] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- [ 0.098284] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
- [ 0.098289] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.098350] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 0.098732] pci 0000:03:00.0: [8086:4232] type 0 class 0x000280
- [ 0.098778] pci 0000:03:00.0: reg 10: [mem 0xfdffe000-0xfdffffff 64bit]
- [ 0.099034] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- [ 0.101039] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
- [ 0.101308] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.101376] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
- [ 0.101630] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.101635] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe9fffff]
- [ 0.101643] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf8efffff 64bit pref]
- [ 0.101779] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
- [ 0.101843] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
- [ 0.101952] pci 0000:06:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
- [ 0.102018] pci 0000:06:00.0: reg 20: [mem 0xf8fe0000-0xf8feffff 64bit pref]
- [ 0.102064] pci 0000:06:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
- [ 0.102327] pci 0000:06:00.0: supports D1 D2
- [ 0.102330] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.102488] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
- [ 0.102741] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
- [ 0.102746] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.102754] pci 0000:00:1c.5: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
- [ 0.102801] pci 0000:07:01.0: [1180:0832] type 0 class 0x000c00
- [ 0.102823] pci 0000:07:01.0: reg 10: [mem 0xfebff800-0xfebfffff]
- [ 0.102921] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
- [ 0.102944] pci 0000:07:01.1: [1180:0822] type 0 class 0x000805
- [ 0.102966] pci 0000:07:01.1: reg 10: [mem 0xfebff400-0xfebff4ff]
- [ 0.103073] pci 0000:07:01.1: supports D1 D2
- [ 0.103075] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.103099] pci 0000:07:01.2: [1180:0843] type 0 class 0x000880
- [ 0.103121] pci 0000:07:01.2: reg 10: [mem 0xfebff000-0xfebff0ff]
- [ 0.103218] pci 0000:07:01.2: supports D1 D2
- [ 0.103220] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.103243] pci 0000:07:01.3: [1180:0592] type 0 class 0x000880
- [ 0.103265] pci 0000:07:01.3: reg 10: [mem 0xfebfec00-0xfebfecff]
- [ 0.103362] pci 0000:07:01.3: supports D1 D2
- [ 0.103364] pci 0000:07:01.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.103388] pci 0000:07:01.4: [1180:0852] type 0 class 0x000880
- [ 0.103410] pci 0000:07:01.4: reg 10: [mem 0xfebfe800-0xfebfe8ff]
- [ 0.103507] pci 0000:07:01.4: supports D1 D2
- [ 0.103509] pci 0000:07:01.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.103573] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
- [ 0.103831] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.103839] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.103841] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.103844] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.103846] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.103849] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
- [ 0.103884] pci_bus 0000:00: on NUMA node 0
- [ 0.103887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.104078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.104120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
- [ 0.104149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
- [ 0.104222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
- [ 0.104251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
- [ 0.104423] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.104921] pci0000:00: ACPI _OSC control (0x1d) granted
- [ 0.115044] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
- [ 0.116043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
- [ 0.116644] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
- [ 0.117033] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
- [ 0.117693] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
- [ 0.118163] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
- [ 0.118883] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
- [ 0.119664] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
- [ 0.120329] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.120329] vgaarb: loaded
- [ 0.120366] vgaarb: bridge control possible 0000:01:00.0
- [ 0.121066] SCSI subsystem initialized
- [ 0.121147] libata version 3.00 loaded.
- [ 0.121147] usbcore: registered new interface driver usbfs
- [ 0.121161] usbcore: registered new interface driver hub
- [ 0.121161] usbcore: registered new device driver usb
- [ 0.122013] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.122152] PCI: Using ACPI for IRQ routing
- [ 0.122334] PCI: pci_cache_line_size set to 64 bytes
- [ 0.122448] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
- [ 0.122450] reserve RAM buffer: 00000000bffa0000 - 00000000bfffffff
- [ 0.122471] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.122471] NetLabel: Initializing
- [ 0.122471] NetLabel: domain hash size = 128
- [ 0.122471] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.122471] NetLabel: unlabeled traffic allowed by default
- [ 0.123030] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.123152] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.123591] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.127008] Switching to clocksource hpet
- [ 0.134717] pnp: PnP ACPI init
- [ 0.134860] ACPI: bus type pnp registered
- [ 0.135145] pnp 00:00: [bus 00-ff]
- [ 0.135149] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.135151] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.135154] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.135156] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.135158] pnp 00:00: [mem 0x000d0000-0x000dffff window]
- [ 0.135161] pnp 00:00: [mem 0xc0000000-0xffffffff window]
- [ 0.135163] pnp 00:00: [mem 0x00000000-0xffffffff window]
- [ 0.135259] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.135270] pnp 00:01: [mem 0xfed10000-0xfed19fff]
- [ 0.135346] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
- [ 0.135490] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.135520] pnp 00:02: [dma 4]
- [ 0.135522] pnp 00:02: [io 0x0000-0x000f]
- [ 0.135524] pnp 00:02: [io 0x0081-0x0083]
- [ 0.135526] pnp 00:02: [io 0x0087]
- [ 0.135528] pnp 00:02: [io 0x0089-0x008b]
- [ 0.135529] pnp 00:02: [io 0x008f]
- [ 0.135531] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.135583] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.135595] pnp 00:03: [io 0x0070-0x0071]
- [ 0.135605] pnp 00:03: [irq 8]
- [ 0.135654] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.135685] pnp 00:04: [io 0x0060]
- [ 0.135687] pnp 00:04: [io 0x0064]
- [ 0.135692] pnp 00:04: [irq 1]
- [ 0.135742] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.135794] pnp 00:05: [irq 12]
- [ 0.135857] pnp 00:05: Plug and Play ACPI device, IDs SYN0a0f SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
- [ 0.135868] pnp 00:06: [io 0x0061]
- [ 0.135920] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.135930] pnp 00:07: [io 0x00f0-0x00ff]
- [ 0.135936] pnp 00:07: [irq 13]
- [ 0.135988] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.136159] pnp 00:08: [io 0x0010-0x001f]
- [ 0.136161] pnp 00:08: [io 0x0022-0x003f]
- [ 0.136163] pnp 00:08: [io 0x0044-0x005f]
- [ 0.136165] pnp 00:08: [io 0x0063]
- [ 0.136167] pnp 00:08: [io 0x0065]
- [ 0.136169] pnp 00:08: [io 0x0067-0x006f]
- [ 0.136171] pnp 00:08: [io 0x0072-0x007f]
- [ 0.136173] pnp 00:08: [io 0x0080]
- [ 0.136175] pnp 00:08: [io 0x0084-0x0086]
- [ 0.136177] pnp 00:08: [io 0x0088]
- [ 0.136178] pnp 00:08: [io 0x008c-0x008e]
- [ 0.136180] pnp 00:08: [io 0x0090-0x009f]
- [ 0.136182] pnp 00:08: [io 0x00a2-0x00bf]
- [ 0.136184] pnp 00:08: [io 0x00e0-0x00ef]
- [ 0.136186] pnp 00:08: [io 0x04d0-0x04d1]
- [ 0.136188] pnp 00:08: [io 0x0800-0x087f]
- [ 0.136190] pnp 00:08: [io 0x0400-0x041f]
- [ 0.136192] pnp 00:08: [io 0x0500-0x057f]
- [ 0.136194] pnp 00:08: [mem 0xf9ffec00-0xf9ffecff window]
- [ 0.136196] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
- [ 0.136198] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
- [ 0.136200] pnp 00:08: [mem 0xfed45000-0xfed89fff]
- [ 0.136202] pnp 00:08: [mem 0xfed90000-0xfed90fff]
- [ 0.136204] pnp 00:08: [mem 0xfed91000-0xfed91fff]
- [ 0.136206] pnp 00:08: [mem 0xfed92000-0xfed92fff]
- [ 0.136209] pnp 00:08: [mem 0xfed93000-0xfed93fff]
- [ 0.136211] pnp 00:08: [mem 0xffb00000-0xffbfffff]
- [ 0.136213] pnp 00:08: [mem 0xfff00000-0xffffffff]
- [ 0.136325] system 00:08: [io 0x04d0-0x04d1] has been reserved
- [ 0.136467] system 00:08: [io 0x0800-0x087f] has been reserved
- [ 0.136607] system 00:08: [io 0x0400-0x041f] has been reserved
- [ 0.136747] system 00:08: [io 0x0500-0x057f] has been reserved
- [ 0.136889] system 00:08: [mem 0xf9ffec00-0xf9ffecff window] has been reserved
- [ 0.137121] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.137262] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.137404] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
- [ 0.137546] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
- [ 0.137688] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
- [ 0.137830] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
- [ 0.137972] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
- [ 0.138141] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
- [ 0.138283] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
- [ 0.138425] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.138484] pnp 00:09: [mem 0xfed00000-0xfed003ff]
- [ 0.138539] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.138587] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
- [ 0.138590] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
- [ 0.138592] pnp 00:0a: [mem 0xfec10000-0xfec17fff]
- [ 0.138594] pnp 00:0a: [mem 0xfec18000-0xfec1ffff]
- [ 0.138596] pnp 00:0a: [mem 0xfec20000-0xfec27fff]
- [ 0.138598] pnp 00:0a: [mem 0xfec38000-0xfec3ffff]
- [ 0.138600] pnp 00:0a: [io 0x0250-0x0253]
- [ 0.138602] pnp 00:0a: [io 0x0256-0x025f]
- [ 0.138680] system 00:0a: [io 0x0250-0x0253] has been reserved
- [ 0.138821] system 00:0a: [io 0x0256-0x025f] has been reserved
- [ 0.138962] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.139126] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.139268] system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
- [ 0.139410] system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
- [ 0.139551] system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
- [ 0.139693] system 00:0a: [mem 0xfec38000-0xfec3ffff] has been reserved
- [ 0.139835] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.139980] pnp 00:0b: [io 0x0300-0x0307]
- [ 0.139987] pnp 00:0b: [irq 4]
- [ 0.140067] pnp 00:0b: Plug and Play ACPI device, IDs ITE8708 (active)
- [ 0.140108] pnp 00:0c: [mem 0xe0000000-0xefffffff]
- [ 0.140183] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.140326] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.144180] pnp 00:0d: [mem 0x00000000-0x0009ffff]
- [ 0.144183] pnp 00:0d: [mem 0x000c0000-0x000cffff]
- [ 0.144185] pnp 00:0d: [mem 0x000e0000-0x000fffff]
- [ 0.144187] pnp 00:0d: [mem 0x00100000-0xbfffffff]
- [ 0.144190] pnp 00:0d: [mem 0x00000000-0xffffffff disabled]
- [ 0.144282] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.144425] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.144568] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.144710] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
- [ 0.144852] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.144990] pnp: PnP ACPI: found 14 devices
- [ 0.145146] ACPI: ACPI bus type pnp unregistered
- [ 0.179961] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.180034] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd000000-0xfd07ffff pref]
- [ 0.180248] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.180388] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- [ 0.180530] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
- [ 0.180673] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.180889] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 0.181050] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
- [ 0.181194] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.181344] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
- [ 0.181485] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.181629] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe9fffff]
- [ 0.181774] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf8efffff 64bit pref]
- [ 0.181993] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
- [ 0.182143] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
- [ 0.182287] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.182432] pci 0000:00:1c.5: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
- [ 0.182652] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
- [ 0.182796] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.182987] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.182991] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.182994] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.182996] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.182999] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.183010] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.183013] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
- [ 0.183015] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
- [ 0.183018] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.183020] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
- [ 0.183023] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
- [ 0.183025] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe9fffff]
- [ 0.183027] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf8efffff 64bit pref]
- [ 0.183030] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
- [ 0.183032] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
- [ 0.183035] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
- [ 0.183037] pci_bus 0000:07: resource 1 [mem 0xfeb00000-0xfebfffff]
- [ 0.183040] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
- [ 0.183042] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
- [ 0.183044] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.183047] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.183049] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.183078] NET: Registered protocol family 2
- [ 0.183266] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.183572] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.184186] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.184526] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.184667] TCP reno registered
- [ 0.184804] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.184949] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.185150] NET: Registered protocol family 1
- [ 0.185377] RPC: Registered named UNIX socket transport module.
- [ 0.185518] RPC: Registered udp transport module.
- [ 0.185657] RPC: Registered tcp transport module.
- [ 0.185795] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.185952] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
- [ 0.185954] pci 0000:00:1a.0: Performing full reset
- [ 0.185984] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
- [ 0.185986] pci 0000:00:1a.1: Performing full reset
- [ 0.186025] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
- [ 0.186027] pci 0000:00:1a.2: Performing full reset
- [ 0.186092] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
- [ 0.186094] pci 0000:00:1d.0: Performing full reset
- [ 0.186118] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
- [ 0.186120] pci 0000:00:1d.1: Performing full reset
- [ 0.186143] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
- [ 0.186145] pci 0000:00:1d.2: Performing full reset
- [ 0.186207] pci 0000:01:00.0: Boot video device
- [ 0.186230] PCI: CLS 32 bytes, default 64
- [ 0.186278] Simple Boot Flag at 0x51 set to 0x80
- [ 0.187118] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
- [ 0.187262] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
- [ 0.187460] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.187994] audit: initializing netlink socket (disabled)
- [ 0.188157] type=2000 audit(1341657673.187:1): initialized
- [ 0.204125] highmem bounce pool size: 64 pages
- [ 0.204267] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.208356] VFS: Disk quotas dquot_6.5.2
- [ 0.208584] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.209598] msgmni has been set to 1707
- [ 0.209841] SELinux: Registering netfilter hooks
- [ 0.210266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.210480] io scheduler noop registered
- [ 0.210617] io scheduler deadline registered
- [ 0.210759] io scheduler cfq registered (default)
- [ 0.211050] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.211315] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
- [ 0.211517] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
- [ 0.211720] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
- [ 0.211964] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
- [ 0.212286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.213422] Non-volatile memory driver v1.3
- [ 0.213632] Linux agpgart interface v0.103
- [ 0.214252] ACPI: AC Adapter [AC0] (on-line)
- [ 0.214526] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
- [ 0.214744] ACPI: Sleep Button [SLPB]
- [ 0.214952] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
- [ 0.216496] ACPI: Lid Switch [LID]
- [ 0.216704] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.216977] ACPI: Power Button [PWRF]
- [ 0.226770] acpi device:1d: registered as cooling_device0
- [ 0.227011] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input3
- [ 0.227232] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 0.227755] Monitor-Mwait will be used to enter C-1 state
- [ 0.227785] Monitor-Mwait will be used to enter C-3 state
- [ 0.227797] Marking TSC unstable due to TSC halts in idle
- [ 0.227943] ACPI: acpi_idle registered with cpuidle
- [ 0.239401] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.239541] ACPI: Thermal Zone [THRM] (35 C)
- [ 0.239854] [drm] Initialized drm 1.1.0 20060810
- [ 0.240063] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
- [ 0.243387] brd: module loaded
- [ 0.245383] loop: module loaded
- [ 0.245997] ahci 0000:00:1f.2: version 3.0
- [ 0.246101] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
- [ 0.246187] ahci: SSS flag set, parallel bus scan disabled
- [ 0.246361] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
- [ 0.246576] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs
- [ 0.246794] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.250911] scsi0 : ahci
- [ 0.251201] scsi1 : ahci
- [ 0.251461] scsi2 : ahci
- [ 0.251716] scsi3 : ahci
- [ 0.251970] scsi4 : ahci
- [ 0.252240] scsi5 : ahci
- [ 0.252761] ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 45
- [ 0.254695] ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 45
- [ 0.254974] ata3: DUMMY
- [ 0.255125] ata4: DUMMY
- [ 0.255261] ata5: DUMMY
- [ 0.255449] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 45
- [ 0.255940] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.256267] r8169 0000:06:00.0: irq 46 for MSI/MSI-X
- [ 0.256681] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xf803c000, 00:23:54:62:85:bb, XID 1c4000c0 IRQ 46
- [ 0.256952] r8169 0000:06:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
- [ 0.257259] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
- [ 0.257426] Copyright(c) 2003-2011 Intel Corporation
- [ 0.257665] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
- [ 0.257858] iwlwifi 0000:03:00.0: pci_resource_base = f8040000
- [ 0.258084] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
- [ 0.258362] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
- [ 0.258431] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
- [ 0.258630] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
- [ 0.258774] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
- [ 0.258915] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
- [ 0.259076] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
- [ 0.259219] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
- [ 0.259482] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
- [ 0.277190] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.283072] iwlwifi 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
- [ 0.283213] iwlwifi 0000:03:00.0: Device SKU: 0xF0
- [ 0.283360] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
- [ 0.283853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.283995] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
- [ 0.284033] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.284037] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.284192] drivers/usb/core/inode.c: creating file 'devices'
- [ 0.284196] drivers/usb/core/inode.c: creating file '001'
- [ 0.284264] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.284482] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
- [ 0.284487] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
- [ 0.284511] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.284652] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.288535] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.288538] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
- [ 0.288553] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
- [ 0.288697] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.294018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.294192] usb usb1: default language 0x0409
- [ 0.294198] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.294200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.294342] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.294554] usb usb1: Product: EHCI Host Controller
- [ 0.294693] usb usb1: Manufacturer: Linux 3.3.5-gentoo ehci_hcd
- [ 0.294833] usb usb1: SerialNumber: 0000:00:1a.7
- [ 0.295083] usb usb1: usb_probe_device
- [ 0.295086] usb usb1: configuration #1 chosen from 1 choice
- [ 0.295092] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.295144] hub 1-0:1.0: usb_probe_interface
- [ 0.295146] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.295148] hub 1-0:1.0: USB hub found
- [ 0.295287] hub 1-0:1.0: 6 ports detected
- [ 0.295425] hub 1-0:1.0: standalone hub
- [ 0.295426] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.295428] hub 1-0:1.0: individual port over-current protection
- [ 0.295430] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.295434] hub 1-0:1.0: local power source is good
- [ 0.295436] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.295464] drivers/usb/core/inode.c: creating file '001'
- [ 0.295514] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.295518] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.295661] drivers/usb/core/inode.c: creating file '002'
- [ 0.295729] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.295946] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
- [ 0.295950] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
- [ 0.295973] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.296130] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.300018] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.300020] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
- [ 0.300034] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
- [ 0.300178] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.306014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.306174] usb usb2: default language 0x0409
- [ 0.306180] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.306182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.306325] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.306538] usb usb2: Product: EHCI Host Controller
- [ 0.306676] usb usb2: Manufacturer: Linux 3.3.5-gentoo ehci_hcd
- [ 0.306816] usb usb2: SerialNumber: 0000:00:1d.7
- [ 0.307060] usb usb2: usb_probe_device
- [ 0.307063] usb usb2: configuration #1 chosen from 1 choice
- [ 0.307068] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.307119] hub 2-0:1.0: usb_probe_interface
- [ 0.307122] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.307123] hub 2-0:1.0: USB hub found
- [ 0.307262] hub 2-0:1.0: 6 ports detected
- [ 0.307399] hub 2-0:1.0: standalone hub
- [ 0.307400] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.307402] hub 2-0:1.0: individual port over-current protection
- [ 0.307404] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.307408] hub 2-0:1.0: local power source is good
- [ 0.307410] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.307438] drivers/usb/core/inode.c: creating file '001'
- [ 0.307510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.307651] ohci_hcd: block sizes: ed 64 td 64
- [ 0.307698] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.307861] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.307865] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.308019] drivers/usb/core/inode.c: creating file '003'
- [ 0.308085] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.308303] uhci_hcd 0000:00:1a.0: detected 2 ports
- [ 0.308445] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.308447] uhci_hcd 0000:00:1a.0: Performing full reset
- [ 0.308461] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
- [ 0.308475] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
- [ 0.308642] usb usb3: default language 0x0409
- [ 0.308648] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.308650] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.308791] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.309017] usb usb3: Product: UHCI Host Controller
- [ 0.309155] usb usb3: Manufacturer: Linux 3.3.5-gentoo uhci_hcd
- [ 0.309295] usb usb3: SerialNumber: 0000:00:1a.0
- [ 0.309534] usb usb3: usb_probe_device
- [ 0.309537] usb usb3: configuration #1 chosen from 1 choice
- [ 0.309543] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.309595] hub 3-0:1.0: usb_probe_interface
- [ 0.309597] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.309599] hub 3-0:1.0: USB hub found
- [ 0.309738] hub 3-0:1.0: 2 ports detected
- [ 0.309875] hub 3-0:1.0: standalone hub
- [ 0.309876] hub 3-0:1.0: no power switching (usb 1.0)
- [ 0.309878] hub 3-0:1.0: individual port over-current protection
- [ 0.309880] hub 3-0:1.0: power on to power good time: 2ms
- [ 0.309884] hub 3-0:1.0: local power source is good
- [ 0.309886] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 0.309899] drivers/usb/core/inode.c: creating file '001'
- [ 0.309929] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
- [ 0.309954] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.309957] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.310118] drivers/usb/core/inode.c: creating file '004'
- [ 0.310185] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.310403] uhci_hcd 0000:00:1a.1: detected 2 ports
- [ 0.310545] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.310547] uhci_hcd 0000:00:1a.1: Performing full reset
- [ 0.310562] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
- [ 0.310579] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
- [ 0.310743] usb usb4: default language 0x0409
- [ 0.310749] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.310751] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.310893] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.311123] usb usb4: Product: UHCI Host Controller
- [ 0.311261] usb usb4: Manufacturer: Linux 3.3.5-gentoo uhci_hcd
- [ 0.311401] usb usb4: SerialNumber: 0000:00:1a.1
- [ 0.311639] usb usb4: usb_probe_device
- [ 0.311641] usb usb4: configuration #1 chosen from 1 choice
- [ 0.311647] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.311699] hub 4-0:1.0: usb_probe_interface
- [ 0.311701] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.311703] hub 4-0:1.0: USB hub found
- [ 0.311841] hub 4-0:1.0: 2 ports detected
- [ 0.311978] hub 4-0:1.0: standalone hub
- [ 0.311980] hub 4-0:1.0: no power switching (usb 1.0)
- [ 0.311982] hub 4-0:1.0: individual port over-current protection
- [ 0.311984] hub 4-0:1.0: power on to power good time: 2ms
- [ 0.311987] hub 4-0:1.0: local power source is good
- [ 0.311989] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 0.312013] drivers/usb/core/inode.c: creating file '001'
- [ 0.312039] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
- [ 0.312064] uhci_hcd 0000:00:1a.2: setting latency timer to 64
- [ 0.312068] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 0.312211] drivers/usb/core/inode.c: creating file '005'
- [ 0.312278] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 0.312496] uhci_hcd 0000:00:1a.2: detected 2 ports
- [ 0.312637] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.312639] uhci_hcd 0000:00:1a.2: Performing full reset
- [ 0.312654] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
- [ 0.312668] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
- [ 0.312832] usb usb5: default language 0x0409
- [ 0.312837] usb usb5: udev 1, busnum 5, minor = 512
- [ 0.312840] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.312981] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.313221] usb usb5: Product: UHCI Host Controller
- [ 0.313360] usb usb5: Manufacturer: Linux 3.3.5-gentoo uhci_hcd
- [ 0.313500] usb usb5: SerialNumber: 0000:00:1a.2
- [ 0.313730] usb usb5: usb_probe_device
- [ 0.313732] usb usb5: configuration #1 chosen from 1 choice
- [ 0.313738] usb usb5: adding 5-0:1.0 (config #1, interface 0)
- [ 0.313787] hub 5-0:1.0: usb_probe_interface
- [ 0.313789] hub 5-0:1.0: usb_probe_interface - got id
- [ 0.313791] hub 5-0:1.0: USB hub found
- [ 0.313930] hub 5-0:1.0: 2 ports detected
- [ 0.314087] hub 5-0:1.0: standalone hub
- [ 0.314088] hub 5-0:1.0: no power switching (usb 1.0)
- [ 0.314090] hub 5-0:1.0: individual port over-current protection
- [ 0.314092] hub 5-0:1.0: power on to power good time: 2ms
- [ 0.314096] hub 5-0:1.0: local power source is good
- [ 0.314098] hub 5-0:1.0: trying to enable port power on non-switchable hub
- [ 0.314112] drivers/usb/core/inode.c: creating file '001'
- [ 0.314136] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
- [ 0.314162] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.314165] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.314307] drivers/usb/core/inode.c: creating file '006'
- [ 0.314378] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 0.314595] uhci_hcd 0000:00:1d.0: detected 2 ports
- [ 0.314737] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.314739] uhci_hcd 0000:00:1d.0: Performing full reset
- [ 0.314754] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
- [ 0.314758] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
- [ 0.314923] usb usb6: default language 0x0409
- [ 0.314928] usb usb6: udev 1, busnum 6, minor = 640
- [ 0.314930] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.315090] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.315303] usb usb6: Product: UHCI Host Controller
- [ 0.315441] usb usb6: Manufacturer: Linux 3.3.5-gentoo uhci_hcd
- [ 0.315581] usb usb6: SerialNumber: 0000:00:1d.0
- [ 0.315811] usb usb6: usb_probe_device
- [ 0.315813] usb usb6: configuration #1 chosen from 1 choice
- [ 0.315819] usb usb6: adding 6-0:1.0 (config #1, interface 0)
- [ 0.315871] hub 6-0:1.0: usb_probe_interface
- [ 0.315873] hub 6-0:1.0: usb_probe_interface - got id
- [ 0.315874] hub 6-0:1.0: USB hub found
- [ 0.316038] hub 6-0:1.0: 2 ports detected
- [ 0.316175] hub 6-0:1.0: standalone hub
- [ 0.316177] hub 6-0:1.0: no power switching (usb 1.0)
- [ 0.316179] hub 6-0:1.0: individual port over-current protection
- [ 0.316181] hub 6-0:1.0: power on to power good time: 2ms
- [ 0.316184] hub 6-0:1.0: local power source is good
- [ 0.316186] hub 6-0:1.0: trying to enable port power on non-switchable hub
- [ 0.316200] drivers/usb/core/inode.c: creating file '001'
- [ 0.316228] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
- [ 0.316250] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.316253] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.316397] drivers/usb/core/inode.c: creating file '007'
- [ 0.316462] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 0.316680] uhci_hcd 0000:00:1d.1: detected 2 ports
- [ 0.316821] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.316823] uhci_hcd 0000:00:1d.1: Performing full reset
- [ 0.316838] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
- [ 0.316843] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
- [ 0.317025] usb usb7: default language 0x0409
- [ 0.317030] usb usb7: udev 1, busnum 7, minor = 768
- [ 0.317032] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.317174] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.317386] usb usb7: Product: UHCI Host Controller
- [ 0.317525] usb usb7: Manufacturer: Linux 3.3.5-gentoo uhci_hcd
- [ 0.317665] usb usb7: SerialNumber: 0000:00:1d.1
- [ 0.317899] usb usb7: usb_probe_device
- [ 0.317901] usb usb7: configuration #1 chosen from 1 choice
- [ 0.317907] usb usb7: adding 7-0:1.0 (config #1, interface 0)
- [ 0.317959] hub 7-0:1.0: usb_probe_interface
- [ 0.317961] hub 7-0:1.0: usb_probe_interface - got id
- [ 0.317963] hub 7-0:1.0: USB hub found
- [ 0.318122] hub 7-0:1.0: 2 ports detected
- [ 0.318260] hub 7-0:1.0: standalone hub
- [ 0.318261] hub 7-0:1.0: no power switching (usb 1.0)
- [ 0.318263] hub 7-0:1.0: individual port over-current protection
- [ 0.318265] hub 7-0:1.0: power on to power good time: 2ms
- [ 0.318268] hub 7-0:1.0: local power source is good
- [ 0.318270] hub 7-0:1.0: trying to enable port power on non-switchable hub
- [ 0.318284] drivers/usb/core/inode.c: creating file '001'
- [ 0.318315] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
- [ 0.318336] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.318339] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.318481] drivers/usb/core/inode.c: creating file '008'
- [ 0.318547] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 0.318766] uhci_hcd 0000:00:1d.2: detected 2 ports
- [ 0.318908] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.318910] uhci_hcd 0000:00:1d.2: Performing full reset
- [ 0.318924] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
- [ 0.318929] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
- [ 0.319120] usb usb8: default language 0x0409
- [ 0.319126] usb usb8: udev 1, busnum 8, minor = 896
- [ 0.319128] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.319270] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.319483] usb usb8: Product: UHCI Host Controller
- [ 0.319621] usb usb8: Manufacturer: Linux 3.3.5-gentoo uhci_hcd
- [ 0.319761] usb usb8: SerialNumber: 0000:00:1d.2
- [ 0.319993] usb usb8: usb_probe_device
- [ 0.319995] usb usb8: configuration #1 chosen from 1 choice
- [ 0.320011] usb usb8: adding 8-0:1.0 (config #1, interface 0)
- [ 0.320063] hub 8-0:1.0: usb_probe_interface
- [ 0.320065] hub 8-0:1.0: usb_probe_interface - got id
- [ 0.320067] hub 8-0:1.0: USB hub found
- [ 0.320206] hub 8-0:1.0: 2 ports detected
- [ 0.320343] hub 8-0:1.0: standalone hub
- [ 0.320344] hub 8-0:1.0: no power switching (usb 1.0)
- [ 0.320346] hub 8-0:1.0: individual port over-current protection
- [ 0.320348] hub 8-0:1.0: power on to power good time: 2ms
- [ 0.320352] hub 8-0:1.0: local power source is good
- [ 0.320353] hub 8-0:1.0: trying to enable port power on non-switchable hub
- [ 0.320369] drivers/usb/core/inode.c: creating file '001'
- [ 0.320398] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
- [ 0.320494] usbcore: registered new interface driver usblp
- [ 0.320633] Initializing USB Mass Storage driver...
- [ 0.320836] usbcore: registered new interface driver usb-storage
- [ 0.320976] USB Mass Storage support registered.
- [ 0.321204] usbcore: registered new interface driver libusual
- [ 0.321430] usbcore: registered new interface driver usbserial
- [ 0.321570] usbserial: USB Serial Driver core
- [ 0.321835] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 0.325778] i8042: Detected active multiplexing controller, rev 1.1
- [ 0.327802] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.327943] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.328121] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.328296] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.328460] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.328732] mousedev: PS/2 mouse device common for all mice
- [ 0.329318] rtc_cmos 00:03: RTC can wake from S4
- [ 0.329599] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.329768] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.330215] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.330530] cpuidle: using governor ladder
- [ 0.330709] cpuidle: using governor menu
- [ 0.330847] EFI Variables Facility v0.08 2004-May-17
- [ 0.331089] asus_laptop: Asus Laptop Support version 0.42
- [ 0.331340] asus_laptop: G50V model detected
- [ 0.331829] asus_laptop: Backlight controlled by ACPI video driver
- [ 0.332073] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input4
- [ 0.332485] Registered led device: asus::touchpad
- [ 0.333036] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
- [ 0.349471] hda_codec: ALC663: SKU not ready 0x598301f0
- [ 0.357656] ALSA device list:
- [ 0.357793] #0: HDA Intel at 0xf9ff8000 irq 48
- [ 0.357938] Netfilter messages via NETLINK v0.30.
- [ 0.358097] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.358476] ctnetlink v0.93: registering with nfnetlink.
- [ 0.359023] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.359195] TCP cubic registered
- [ 0.359332] NET: Registered protocol family 17
- [ 0.359478] lib80211: common routines for IEEE802.11 drivers
- [ 0.359618] lib80211_crypt: registered algorithm 'NULL'
- [ 0.359620] Registering the dns_resolver key type
- [ 0.359774] Using IPI No-Shortcut mode
- [ 0.361854] PM: Hibernation image not present or could not be loaded.
- [ 0.361867] registered taskstats version 1
- [ 0.362453] Magic number: 4:722:678
- [ 0.362650] console [netcon0] enabled
- [ 0.362787] netconsole: network logging started
- [ 0.368747] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
- [ 0.395068] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.395073] hub 1-0:1.0: port 4: status 0501 change 0001
- [ 0.395084] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.395087] hub 1-0:1.0: port 5: status 0501 change 0001
- [ 0.407057] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.407061] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 0.407077] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.407080] hub 2-0:1.0: port 5: status 0501 change 0001
- [ 0.409074] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.411060] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00
- [ 0.414044] uhci_hcd 0000:00:1a.2: port 1 portsc 0082,00
- [ 0.416055] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
- [ 0.418071] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.420055] uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00
- [ 0.495069] hub 1-0:1.0: state 7 ports 6 chg 0030 evt 0000
- [ 0.495077] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
- [ 0.546347] ehci_hcd 0000:00:1a.7: port 4 high speed
- [ 0.546351] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.560056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.561420] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 0.561829] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.562046] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.563628] ata1.00: ATA-8: ST9320320AS, 0303, max UDMA/133
- [ 0.563772] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.565402] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 0.565850] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.566105] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.567634] ata1.00: configured for UDMA/133
- [ 0.567942] scsi 0:0:0:0: Direct-Access ATA ST9320320AS 0303 PQ: 0 ANSI: 5
- [ 0.569402] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 0.569462] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.569860] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.570017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.570075] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.597211] usb 1-4: new high-speed USB device number 2 using ehci_hcd
- [ 0.649347] ehci_hcd 0000:00:1a.7: port 4 high speed
- [ 0.649351] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.712507] usb 1-4: skipped 1 descriptor after interface
- [ 0.712511] usb 1-4: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 9
- [ 0.712729] usb 1-4: config 1 interface 0 altsetting 0 endpoint 0x2 has an invalid bInterval 0, changing to 9
- [ 0.713129] usb 1-4: default language 0x0409
- [ 0.714125] usb 1-4: udev 2, busnum 1, minor = 1
- [ 0.714128] usb 1-4: New USB device found, idVendor=0b05, idProduct=175b
- [ 0.714274] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 0.714415] usb 1-4: Product: LCM
- [ 0.714551] usb 1-4: Manufacturer: ASUS
- [ 0.714849] usb 1-4: usb_probe_device
- [ 0.714857] usb 1-4: configuration #1 chosen from 1 choice
- [ 0.715014] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
- [ 0.715146] drivers/usb/core/inode.c: creating file '002'
- [ 0.715171] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
- [ 0.766224] ehci_hcd 0000:00:1a.7: port 5 full speed --> companion
- [ 0.766228] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 0.766231] hub 1-0:1.0: port 5 not reset yet, waiting 50ms
- [ 0.817043] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 0.817062] hub 2-0:1.0: state 7 ports 6 chg 0022 evt 0000
- [ 0.817068] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.868205] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
- [ 0.868208] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 0.868211] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
- [ 0.874066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.874725] sda: sda1 sda2 sda3 sda4
- [ 0.875611] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.876417] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.876631] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.878462] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.C0, max UDMA/100
- [ 0.880980] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.881141] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
- [ 0.882920] ata2.00: configured for UDMA/100
- [ 0.884933] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.C0 PQ: 0 ANSI: 5
- [ 0.886670] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.886893] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.887315] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 0.887464] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 0.919070] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC
- [ 0.919084] hub 2-0:1.0: unable to enumerate USB device on port 1
- [ 0.919239] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
- [ 0.970329] ehci_hcd 0000:00:1d.7: port 5 high speed
- [ 0.970332] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.021043] usb 2-5: new high-speed USB device number 3 using ehci_hcd
- [ 1.072329] ehci_hcd 0000:00:1d.7: port 5 high speed
- [ 1.072333] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.175867] usb 2-5: skipped 1 descriptor after configuration
- [ 1.175870] usb 2-5: skipped 6 descriptors after interface
- [ 1.175873] usb 2-5: skipped 1 descriptor after endpoint
- [ 1.175875] usb 2-5: skipped 12 descriptors after interface
- [ 1.176499] usb 2-5: default language 0x0409
- [ 1.182729] usb 2-5: udev 3, busnum 2, minor = 130
- [ 1.182732] usb 2-5: New USB device found, idVendor=064e, idProduct=a115
- [ 1.182882] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 1.183037] usb 2-5: Product: USB 2.0 UVC 2.0M WebCam
- [ 1.183182] usb 2-5: Manufacturer: SuYin
- [ 1.183323] usb 2-5: SerialNumber: CN2015-S30B-OV03-VS-R01.01.01
- [ 1.183543] usb 2-5: usb_probe_device
- [ 1.183546] usb 2-5: configuration #1 chosen from 1 choice
- [ 1.183859] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
- [ 1.186525] usb 2-5: adding 2-5:1.1 (config #1, interface 1)
- [ 1.186601] drivers/usb/core/inode.c: creating file '003'
- [ 1.186618] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 1.186621] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 1.186636] uhci_hcd 0000:00:1a.2: port 1 portsc 0093,00
- [ 1.186642] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 1.192040] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.275270] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
- [ 1.290067] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 1.317651] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
- [ 1.320746] md: Waiting for all devices to be available before autodetect
- [ 1.320894] md: If you don't use raid, use raid=noautodetect
- [ 1.321367] md: Autodetecting RAID arrays.
- [ 1.321504] md: Scanned 0 and added 0 devices.
- [ 1.321640] md: autorun ...
- [ 1.321774] md: ... autorun DONE.
- [ 1.392053] usb 5-1: new full-speed USB device number 2 using uhci_hcd
- [ 1.454042] usb usb3: suspend_rh (auto-stop)
- [ 1.454067] usb usb7: suspend_rh (auto-stop)
- [ 1.454090] usb usb4: suspend_rh (auto-stop)
- [ 1.454131] usb usb8: suspend_rh (auto-stop)
- [ 1.609110] kjournald starting. Commit interval 5 seconds
- [ 1.609200] EXT3-fs (sda2): mounted filesystem with writeback data mode
- [ 1.609208] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
- [ 1.651119] devtmpfs: mounted
- [ 1.651316] Freeing unused kernel memory: 436k freed
- [ 1.651621] Write protecting the kernel text: 5640k
- [ 1.651811] Write protecting the kernel read-only data: 1720k
- [ 2.106873] usb 5-1: skipped 1 descriptor after interface
- [ 2.109866] usb 5-1: default language 0x0409
- [ 2.124865] usb 5-1: udev 2, busnum 5, minor = 513
- [ 2.124868] usb 5-1: New USB device found, idVendor=0b05, idProduct=1751
- [ 2.125029] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.125170] usb 5-1: Product: BT-253
- [ 2.125307] usb 5-1: Manufacturer: Broadcom Corp
- [ 2.125444] usb 5-1: SerialNumber: 002243C3F1D5
- [ 2.125771] usb 5-1: usb_probe_device
- [ 2.125774] usb 5-1: configuration #1 chosen from 1 choice
- [ 2.126879] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
- [ 2.127040] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
- [ 2.127160] usb 5-1: adding 5-1:1.2 (config #1, interface 2)
- [ 2.127266] usb 5-1: adding 5-1:1.3 (config #1, interface 3)
- [ 2.127359] drivers/usb/core/inode.c: creating file '002'
- [ 2.127376] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 2.127383] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00
- [ 2.127389] hub 6-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 2.231123] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 2.231128] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 2.231131] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020
- [ 2.231138] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 2.257385] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 2.257394] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.257403] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 2.361097] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 2.412330] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
- [ 2.412334] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 2.412337] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
- [ 2.463122] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 2.463142] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 2.463148] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 2.463156] uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
- [ 2.463163] hub 6-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 2.567126] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 2.669126] usb 6-1: new full-speed USB device number 2 using uhci_hcd
- [ 2.717083] cat used greatest stack depth: 6504 bytes left
- [ 2.789022] usb 6-1: ep0 maxpacket = 8
- [ 2.816958] usb 6-1: skipped 1 descriptor after interface
- [ 2.816962] usb 6-1: skipped 1 descriptor after interface
- [ 2.819955] usb 6-1: default language 0x0409
- [ 2.825279] gzip used greatest stack depth: 5856 bytes left
- [ 2.835956] usb 6-1: udev 2, busnum 6, minor = 641
- [ 2.835960] usb 6-1: New USB device found, idVendor=1532, idProduct=0101
- [ 2.836118] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.836259] usb 6-1: Product: Razer Copperhead Laser Mouse
- [ 2.836398] usb 6-1: Manufacturer: Razer
- [ 2.836729] usb 6-1: usb_probe_device
- [ 2.836733] usb 6-1: configuration #1 chosen from 1 choice
- [ 2.837963] usb 6-1: adding 6-1:1.0 (config #1, interface 0)
- [ 2.838096] usb 6-1: adding 6-1:1.1 (config #1, interface 1)
- [ 2.838220] drivers/usb/core/inode.c: creating file '002'
- [ 2.838235] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 2.966996] loadkeys used greatest stack depth: 5792 bytes left
- [ 2.967294] init-early.sh used greatest stack depth: 5576 bytes left
- [ 5.318234] udevd[1084]: starting version 182
- [ 6.625447] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
- [ 6.625625] Registered led device: phy0-led
- [ 6.625688] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
- [ 7.253775] nvidia: module license 'NVIDIA' taints kernel.
- [ 7.253779] Disabling lock debugging due to kernel taint
- [ 7.271241] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 7.271433] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.49 Mon Apr 30 23:30:07 PDT 2012
- [ 12.381567] EXT3-fs (sda2): using internal journal
- [ 12.579735] kjournald starting. Commit interval 5 seconds
- [ 12.580266] EXT3-fs (sda1): using internal journal
- [ 12.580270] EXT3-fs (sda1): mounted filesystem with writeback data mode
- [ 12.665901] kjournald starting. Commit interval 5 seconds
- [ 12.665961] EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
- [ 12.666478] EXT3-fs (sda3): using internal journal
- [ 12.666481] EXT3-fs (sda3): mounted filesystem with writeback data mode
- [ 14.465375] r8169 0000:06:00.0: eth0: link down
- [ 52.762940] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
- [ 52.765963] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
- [ 52.875971] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
- [ 52.878977] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
- [ 53.874497] Adding 7293504k swap on /dev/sda4. Priority:-1 extents:1 across:7293504k
- [ 56.881263] wlan0: authenticate with c0:3f:0e:c2:77:04 (try 1)
- [ 56.887027] wlan0: authenticated
- [ 56.888229] wlan0: waiting for beacon from c0:3f:0e:c2:77:04
- [ 56.987869] wlan0: beacon received
- [ 56.992090] wlan0: associate with c0:3f:0e:c2:77:04 (try 1)
- [ 56.997980] wlan0: RX AssocResp from c0:3f:0e:c2:77:04 (capab=0x411 status=0 aid=3)
- [ 56.997983] wlan0: associated
- [ 56.997986] wlan0: moving STA c0:3f:0e:c2:77:04 to state 1
- [ 56.997989] wlan0: moving STA c0:3f:0e:c2:77:04 to state 2
- [ 56.997991] wlan0: moving STA c0:3f:0e:c2:77:04 to state 3
- [ 98.194829] /dev/vmmon[2230]: Module vmmon: registered with major=10 minor=165
- [ 98.194840] /dev/vmmon[2230]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
- [ 98.194844] /dev/vmmon[2230]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
- [ 98.194847] /dev/vmmon[2230]: Module vmmon: initialized
- [ 98.215953] [2230]: VMCI: shared components initialized.
- [ 98.215984] [2230]: VMCI: host components initialized.
- [ 98.216187] [2230]: VMCI: Module registered (name=vmci,major=10,minor=58).
- [ 98.216190] [2230]: VMCI: Using host personality
- [ 98.216192] [2230]: VMCI: Module (name=vmci) is initialized
- [ 98.699714] netlink: 12 bytes leftover after parsing attributes.
- [ 98.699720] netlink: 12 bytes leftover after parsing attributes.
- [ 98.699737] netlink: 12 bytes leftover after parsing attributes.
- [ 98.699797] /dev/vmnet: open called by PID 2253 (vmnet-bridge)
- [ 98.699803] /dev/vmnet: hub 0 does not exist, allocating memory.
- [ 98.699822] /dev/vmnet: port on hub 0 successfully opened
- [ 98.699831] bridge-wlan0: device is wireless, enabling SMAC
- [ 98.699834] bridge-wlan0: up
- [ 98.699836] bridge-wlan0: attached
- [ 100.237479] /dev/vmnet: open called by PID 2260 (vmnet-netifup)
- [ 100.237485] /dev/vmnet: hub 1 does not exist, allocating memory.
- [ 100.237504] /dev/vmnet: port on hub 1 successfully opened
- [ 100.515498] /dev/vmnet: open called by PID 2263 (vmnet-dhcpd)
- [ 100.515509] /dev/vmnet: port on hub 1 successfully opened
- [ 100.620829] /dev/vmnet: open called by PID 2267 (vmnet-natd)
- [ 100.620836] /dev/vmnet: hub 8 does not exist, allocating memory.
- [ 100.620855] /dev/vmnet: port on hub 8 successfully opened
- [ 100.640948] netlink: 12 bytes leftover after parsing attributes.
- [ 100.640953] netlink: 12 bytes leftover after parsing attributes.
- [ 100.640973] netlink: 12 bytes leftover after parsing attributes.
- [ 100.642049] userif-3: sent link down event.
- [ 100.642052] userif-3: sent link up event.
- [ 100.651251] /dev/vmnet: open called by PID 2268 (vmnet-netifup)
- [ 100.651258] /dev/vmnet: port on hub 8 successfully opened
- [ 100.749675] /dev/vmnet: open called by PID 2271 (vmnet-dhcpd)
- [ 100.749699] /dev/vmnet: port on hub 8 successfully opened
- [ 101.833068] vmxnet3: Unknown parameter `stkwebcam'
- [ 3514.000130] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 3514.000139] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
- [ 3514.000149] hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
- [ 3514.000153] usb 6-1: USB disconnect, device number 2
- [ 3514.000155] usb 6-1: unregistering device
- [ 3514.000157] usb 6-1: unregistering interface 6-1:1.0
- [ 3514.000205] usb 6-1: unregistering interface 6-1:1.1
- [ 3514.000231] usb 6-1: usb_disable_device nuking all URBs
- [ 3514.104052] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 3515.250043] usb usb6: suspend_rh (auto-stop)
- [ 3516.252255] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 3516.252265] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 3516.252273] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 3516.356029] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 3516.407273] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
- [ 3516.407280] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 3516.407325] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
- [ 3516.458026] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 3516.458048] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 3516.500054] usb usb6: wakeup_rh (auto-start)
- [ 3516.500164] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 3516.500176] uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
- [ 3516.500185] hub 6-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 3516.604024] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 3516.706023] usb 6-1: new full-speed USB device number 3 using uhci_hcd
- [ 3516.826019] usb 6-1: ep0 maxpacket = 8
- [ 3516.856086] usb 6-1: skipped 1 descriptor after interface
- [ 3516.856091] usb 6-1: skipped 1 descriptor after interface
- [ 3516.861081] usb 6-1: default language 0x0409
- [ 3516.879081] usb 6-1: udev 3, busnum 6, minor = 642
- [ 3516.879084] usb 6-1: New USB device found, idVendor=1532, idProduct=0101
- [ 3516.879087] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3516.879089] usb 6-1: Product: Razer Copperhead Laser Mouse
- [ 3516.879091] usb 6-1: Manufacturer: Razer
- [ 3516.879185] usb 6-1: usb_probe_device
- [ 3516.879189] usb 6-1: configuration #1 chosen from 1 choice
- [ 3516.882090] usb 6-1: adding 6-1:1.0 (config #1, interface 0)
- [ 3516.882148] usb 6-1: adding 6-1:1.1 (config #1, interface 1)
- [ 3516.882185] drivers/usb/core/inode.c: creating file '003'
- [ 3516.882207] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 4580.000068] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 4580.000078] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
- [ 4580.000088] hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
- [ 4580.000091] usb 6-1: USB disconnect, device number 3
- [ 4580.000093] usb 6-1: unregistering device
- [ 4580.000095] usb 6-1: unregistering interface 6-1:1.0
- [ 4580.000148] usb 6-1: unregistering interface 6-1:1.1
- [ 4580.000173] usb 6-1: usb_disable_device nuking all URBs
- [ 4580.108038] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 4581.250070] usb usb6: suspend_rh (auto-stop)
- [ 4598.373433] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 4598.373445] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 4598.373454] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 4598.477056] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 4598.528237] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
- [ 4598.528243] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 4598.528253] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
- [ 4598.579025] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 4598.579049] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 4598.750041] usb usb6: wakeup_rh (auto-start)
- [ 4598.750078] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 4598.750087] uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
- [ 4598.750094] hub 6-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 4598.854051] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 4598.956049] usb 6-1: new full-speed USB device number 4 using uhci_hcd
- [ 4599.078028] usb 6-1: ep0 maxpacket = 8
- [ 4599.107076] usb 6-1: skipped 1 descriptor after interface
- [ 4599.107081] usb 6-1: skipped 1 descriptor after interface
- [ 4599.112066] usb 6-1: default language 0x0409
- [ 4599.130087] usb 6-1: udev 4, busnum 6, minor = 643
- [ 4599.130091] usb 6-1: New USB device found, idVendor=1532, idProduct=0101
- [ 4599.130093] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4599.130096] usb 6-1: Product: Razer Copperhead Laser Mouse
- [ 4599.130098] usb 6-1: Manufacturer: Razer
- [ 4599.130209] usb 6-1: usb_probe_device
- [ 4599.130212] usb 6-1: configuration #1 chosen from 1 choice
- [ 4599.133078] usb 6-1: adding 6-1:1.0 (config #1, interface 0)
- [ 4599.133131] usb 6-1: adding 6-1:1.1 (config #1, interface 1)
- [ 4599.133168] drivers/usb/core/inode.c: creating file '004'
- [ 4599.133186] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement