Advertisement
Guest User

Untitled

a guest
Jul 13th, 2011
109
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.35 KB | None | 0 0
  1. 0
  2. [ 9.608071] MC'97 0 converters and GPIO not ready (0x1)
  3. [ 9.617527] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  4. [ 10.802038] Adding 1746936k swap on /dev/sda5. Priority:-1 extents:1 across:1746936k
  5. [ 10.950062] EXT3 FS on sda1, internal journal
  6. [ 11.086435] loop: module loaded
  7. [ 12.255246] fuse init (API version 7.13)
  8. [ 14.065470] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
  9. [ 15.610034] eth0: link down
  10. [ 15.610357] ADDRCONF(NETDEV_UP): eth0: link is not ready
  11. [ 15.776083] b43 ssb0:0: firmware: requesting b43/ucode5.fw
  12. [ 15.989477] b43 ssb0:0: firmware: requesting b43/pcm5.fw
  13. [ 16.122864] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
  14. [ 16.209778] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
  15. [ 16.484058] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
  16. [ 16.525067] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  17. [ 20.392152] Bluetooth: L2CAP ver 2.14
  18. [ 20.392155] Bluetooth: L2CAP socket layer initialized
  19. [ 20.495408] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  20. [ 20.495413] Bluetooth: BNEP filters: protocol multicast
  21. [ 20.530011] Bluetooth: RFCOMM TTY layer initialized
  22. [ 20.530017] Bluetooth: RFCOMM socket layer initialized
  23. [ 20.530020] Bluetooth: RFCOMM ver 1.11
  24. [ 20.530871] Bridge firewalling registered
  25. [ 20.588584] Bluetooth: SCO (Voice Link) ver 0.6
  26. [ 20.588588] Bluetooth: SCO socket layer initialized
  27. [ 22.331939] lp: driver loaded but no devices found
  28. [ 22.527791] ppdev: user-space parallel port driver
  29. [ 27.102422] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-34 processors (1 cpu cores) (version 2.20.00)
  30. [ 27.102480] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4
  31. [ 27.102483] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6
  32. [ 27.102486] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
  33. [ 55.624634] wlan0: direct probe to AP 00:15:62:c8:77:23 (try 1)
  34. [ 55.626766] wlan0: direct probe responded
  35. [ 55.626775] wlan0: authenticate with AP 00:15:62:c8:77:23 (try 1)
  36. [ 55.628440] wlan0: authenticated
  37. [ 55.628478] wlan0: associate with AP 00:15:62:c8:77:23 (try 1)
  38. [ 55.635704] wlan0: RX AssocResp from 00:15:62:c8:77:23 (capab=0x401 status=0 aid=185)
  39. [ 55.635713] wlan0: associated
  40. [ 55.637853] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  41. [ 65.840045] wlan0: no IPv6 routers present
  42. [ 2712.519098] wlan0: deauthenticating from 00:15:62:c8:77:23 by local choice (reason=3)
  43. [ 2713.539904] PM: Syncing filesystems ... done.
  44. [ 2713.547922] PM: Preparing system for mem sleep
  45. [ 2713.553577] Freezing user space processes ... (elapsed 0.00 seconds) done.
  46. [ 2713.554750] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  47. [ 2713.554813] PM: Entering mem sleep
  48. [ 2713.554832] Suspending console(s) (use no_console_suspend to debug)
  49. [ 2713.555581] btusb_intr_complete: hci0 urb ffff880036be7180 failed to resubmit (1)
  50. [ 2713.556569] btusb_bulk_complete: hci0 urb ffff880036be76c0 failed to resubmit (1)
  51. [ 2713.557565] btusb_bulk_complete: hci0 urb ffff880036be7900 failed to resubmit (1)
  52. [ 2713.572056] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  53. [ 2713.814834] sd 0:0:0:0: [sda] Stopping disk
  54. [ 2715.500394] ACPI handle has no context!
  55. [ 2715.500510] ACPI handle has no context!
  56. [ 2715.500521] sdhci-pci 0000:05:09.4: PCI INT A disabled
  57. [ 2715.500529] ACPI handle has no context!
  58. [ 2715.516103] ACPI handle has no context!
  59. [ 2715.516109] tifm_7xx1 0000:05:09.3: PCI INT A disabled
  60. [ 2715.516117] ACPI handle has no context!
  61. [ 2715.532107] ACPI handle has no context!
  62. [ 2715.548096] b43-pci-bridge 0000:05:02.0: PCI INT A disabled
  63. [ 2715.847610] radeon 0000:01:05.0: PCI INT A disabled
  64. [ 2715.860041] radeon 0000:01:05.0: Refused to change power state, currently in D0
  65. [ 2715.860077] radeon 0000:01:05.0: power state changed by ACPI to D3
  66. [ 2715.860233] ATI IXP MC97 controller 0000:00:14.6: PCI INT B disabled
  67. [ 2715.860501] ATI IXP AC97 controller 0000:00:14.5: PCI INT B disabled
  68. [ 2715.860660] pata_atiixp 0000:00:14.1: PCI INT A disabled
  69. [ 2715.860671] ehci_hcd 0000:00:13.2: PCI INT A disabled
  70. [ 2715.860679] ohci_hcd 0000:00:13.1: PCI INT A disabled
  71. [ 2715.860688] ohci_hcd 0000:00:13.0: PCI INT A disabled
  72. [ 2715.876501] ACPI: Preparing to enter system sleep state S3
  73. [ 2715.960247] Disabling non-boot CPUs ...
  74. [ 2715.960268] Back to C!
  75. [ 2715.960268] ACPI: Waking up from system sleep state S3
  76. [ 2716.032357] pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xcff1c801)
  77. [ 2716.032362] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x22209191, writing 0x2209191)
  78. [ 2716.032400] ohci_hcd 0000:00:13.0: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
  79. [ 2716.032408] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
  80. [ 2716.032453] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
  81. [ 2716.032582] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
  82. [ 2716.032641] pci 0000:00:14.4: restoring config space at offset 0x9 (was 0xfff0, writing 0x43f04000)
  83. [ 2716.032651] pci 0000:00:14.4: restoring config space at offset 0x6 (was 0x40050500, writing 0x40090500)
  84. [ 2716.032698] ATI IXP AC97 controller 0000:00:14.5: restoring config space at offset 0x1 (was 0x4300017, writing 0x4300013)
  85. [ 2716.032742] ATI IXP MC97 controller 0000:00:14.6: restoring config space at offset 0x1 (was 0x4300017, writing 0x4300013)
  86. [ 2716.032818] 8139too 0000:05:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xc0208000)
  87. [ 2716.032825] 8139too 0000:05:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xa001)
  88. [ 2716.032832] 8139too 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
  89. [ 2716.032841] 8139too 0000:05:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
  90. [ 2716.032861] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
  91. [ 2716.032887] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0x4 (was 0x0, writing 0xc0204000)
  92. [ 2716.032894] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
  93. [ 2716.032903] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0x1 (was 0x0, writing 0x6)
  94. [ 2716.032925] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c001ff)
  95. [ 2716.032932] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xe (was 0x0, writing 0xa8fc)
  96. [ 2716.032939] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xd (was 0x0, writing 0xa800)
  97. [ 2716.032946] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xc (was 0x0, writing 0xa4fc)
  98. [ 2716.032953] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xb (was 0x0, writing 0xa400)
  99. [ 2716.032960] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
  100. [ 2716.032967] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
  101. [ 2716.032974] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
  102. [ 2716.032981] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
  103. [ 2716.032988] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0090605)
  104. [ 2716.032998] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xc020a000)
  105. [ 2716.033005] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a810)
  106. [ 2716.033243] firewire_ohci 0000:05:09.2: restoring config space at offset 0xf (was 0x4030300, writing 0x4030304)
  107. [ 2716.033269] firewire_ohci 0000:05:09.2: restoring config space at offset 0x5 (was 0x0, writing 0xc0200000)
  108. [ 2716.033276] firewire_ohci 0000:05:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xc0208800)
  109. [ 2716.033283] firewire_ohci 0000:05:09.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
  110. [ 2716.033293] firewire_ohci 0000:05:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100016)
  111. [ 2716.033321] tifm_7xx1 0000:05:09.3: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010a)
  112. [ 2716.033348] tifm_7xx1 0000:05:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0206000)
  113. [ 2716.033355] tifm_7xx1 0000:05:09.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
  114. [ 2716.033364] tifm_7xx1 0000:05:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
  115. [ 2716.033392] sdhci-pci 0000:05:09.4: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010a)
  116. [ 2716.033415] sdhci-pci 0000:05:09.4: restoring config space at offset 0x6 (was 0x0, writing 0xc0208400)
  117. [ 2716.033422] sdhci-pci 0000:05:09.4: restoring config space at offset 0x5 (was 0x0, writing 0xc0209000)
  118. [ 2716.033429] sdhci-pci 0000:05:09.4: restoring config space at offset 0x4 (was 0x0, writing 0xc0209400)
  119. [ 2716.033435] sdhci-pci 0000:05:09.4: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
  120. [ 2716.033444] sdhci-pci 0000:05:09.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
  121. [ 2716.103567] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  122. [ 2716.124046] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  123. [ 2716.148045] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  124. [ 2716.148092] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  125. [ 2716.149875] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  126. [ 2716.150896] atiixp: codec reset timeout
  127. [ 2716.152749] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  128. [ 2716.153320] radeon 0000:01:05.0: power state changed by ACPI to D0
  129. [ 2716.153350] radeon 0000:01:05.0: power state changed by ACPI to D0
  130. [ 2716.153379] radeon 0000:01:05.0: power state changed by ACPI to D0
  131. [ 2716.153408] radeon 0000:01:05.0: power state changed by ACPI to D0
  132. [ 2716.153413] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  133. [ 2716.153623] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
  134. [ 2716.164070] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
  135. [ 2716.164075] ------------[ cut here ]------------
  136. [ 2716.164106] WARNING: at /build/buildd-linux-2.6_2.6.32-35-amd64-aZSlKL/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/gpu/drm/radeon/r100.c:248 r100_irq_set+0x27/0xdb [radeon]()
  137. [ 2716.164110] Hardware name: HP Pavilion (EH735UA#ABA)
  138. [ 2716.164112] Can't enable IRQ/MSI because no handler is installed.
  139. [ 2716.164114] Modules linked in: powernow_k8 cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave parport_pc ppdev lp parport sco bridge rfcomm stp bnep l2cap crc16 binfmt_misc uinput fuse loop firewire_sbp2 snd_atiixp snd_atiixp_modem snd_ac97_codec ac97_bus snd_pcm arc4 ecb radeon snd_seq b43 snd_timer rng_core ttm mac80211 snd_seq_device drm_kms_helper tifm_7xx1 yenta_socket snd drm i2c_algo_bit btusb i2c_piix4 tifm_core joydev i2c_core rsrc_nonstatic shpchp soundcore cfg80211 bluetooth snd_page_alloc rfkill pci_hotplug video output psmouse evdev edac_core edac_mce_amd k8temp ac serio_raw pcspkr wmi processor battery button ext3 jbd mbcache sg sr_mod cdrom sd_mod crc_t10dif ata_generic ssb sdhci_pci sdhci ohci_hcd pata_atiixp firewire_ohci thermal mmc_core 8139too pcmcia libata ehci_hcd led_class thermal_sys firewire_core crc_itu_t 8139cp mii pcmcia_core scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan]
  140. [ 2716.164179] Pid: 3397, comm: pm-suspend Not tainted 2.6.32-5-amd64 #1
  141. [ 2716.164182] Call Trace:
  142. [ 2716.164201] [<ffffffffa047539b>] ? r100_irq_set+0x27/0xdb [radeon]
  143. [ 2716.164219] [<ffffffffa047539b>] ? r100_irq_set+0x27/0xdb [radeon]
  144. [ 2716.164226] [<ffffffff8104df20>] ? warn_slowpath_common+0x77/0xa3
  145. [ 2716.164230] [<ffffffff8104dfa8>] ? warn_slowpath_fmt+0x51/0x59
  146. [ 2716.164236] [<ffffffff81195849>] ? delay_tsc+0x30/0x73
  147. [ 2716.164240] [<ffffffff81195849>] ? delay_tsc+0x30/0x73
  148. [ 2716.164258] [<ffffffffa047a10b>] ? rs400_gart_tlb_flush+0x2a/0x53 [radeon]
  149. [ 2716.164275] [<ffffffffa047a3ff>] ? rs400_gart_enable+0x2cb/0x2d8 [radeon]
  150. [ 2716.164292] [<ffffffffa047539b>] ? r100_irq_set+0x27/0xdb [radeon]
  151. [ 2716.164309] [<ffffffffa047a44b>] ? rs400_startup+0x3f/0x114 [radeon]
  152. [ 2716.164324] [<ffffffffa044dc29>] ? radeon_resume_kms+0x6a/0xa3 [radeon]
  153. [ 2716.164329] [<ffffffff812247d6>] ? pm_op+0x64/0xdb
  154. [ 2716.164333] [<ffffffff81224eae>] ? dpm_resume_end+0x8e/0x362
  155. [ 2716.164338] [<ffffffff8107bc6c>] ? suspend_devices_and_enter+0x175/0x1a6
  156. [ 2716.164342] [<ffffffff8107bd96>] ? enter_state+0xf9/0x13a
  157. [ 2716.164346] [<ffffffff8107b5a0>] ? state_store+0xb4/0xd4
  158. [ 2716.164352] [<ffffffff8113f238>] ? sysfs_write_file+0xd0/0x107
  159. [ 2716.164358] [<ffffffff810ef384>] ? vfs_write+0xa9/0x102
  160. [ 2716.164361] [<ffffffff810ef499>] ? sys_write+0x45/0x6e
  161. [ 2716.164366] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
  162. [ 2716.164369] ---[ end trace 746e78a710311639 ]---
  163. [ 2716.164372] [drm] radeon: cp idle (0x10000C03)
  164. [ 2716.164415] [drm] Loading R300 Microcode
  165. [ 2716.164419] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
  166. [ 2716.312717] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
  167. [ 2716.312722] ata2.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
  168. [ 2716.328681] ata2.00: configured for MWDMA2
  169. [ 2718.440614] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
  170. [ 2718.440618] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
  171. [ 2718.904799] ata1.00: configured for UDMA/100
  172. [ 2776.164076] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
  173. [ 2776.164078] [drm:r100_cp_init] *ERROR* Failed to load firmware!
  174. [ 2776.164081] radeon 0000:01:05.0: failled initializing CP (-2).
  175. [ 2776.249772] b43-pci-bridge 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  176. [ 2776.480042] tifm_7xx1 0000:05:09.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  177. [ 2776.480077] firewire_core: skipped bus generations, destroying all nodes
  178. [ 2776.480116] sdhci-pci 0000:05:09.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  179. [ 2776.812039] sd 0:0:0:0: [sda] Starting disk
  180. [ 2776.980052] firewire_core: rediscovered device fw0
  181. [ 2777.364048] usb 3-3: reset full speed USB device using ohci_hcd and address 2
  182. [ 2777.569089] btusb 3-3:1.0: no reset_resume for driver btusb?
  183. [ 2777.569093] btusb 3-3:1.1: no reset_resume for driver btusb?
  184. [ 2777.820825] PM: Finishing wakeup.
  185. [ 2777.820828] Restarting tasks ... done.
  186. [ 2778.156908] eth0: link down
  187. [ 2778.157225] ADDRCONF(NETDEV_UP): eth0: link is not ready
  188. [ 2778.375156] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
  189. [ 2778.476733] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  190. [ 2794.036002] hci_cmd_task: hci0 command tx timeout
  191. [ 2957.721190] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  192. [ 2957.914695] input: Bluetooth Travel Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-3/3-3:1.0/bluetooth/hci0/hci0:6/input10
  193. [ 2957.915342] generic-bluetooth 0005:046D:B002.0001: input,hidraw0: BLUETOOTH HID v48.09 Mouse [Bluetooth Travel Mouse] on 00:10:C6:D9:00:78
  194. [ 2991.392638] wlan0: direct probe to AP 00:3a:99:3c:9c:e0 (try 1)
  195. [ 2991.395130] wlan0: direct probe responded
  196. [ 2991.395138] wlan0: authenticate with AP 00:3a:99:3c:9c:e0 (try 1)
  197. [ 2991.396778] wlan0: authenticated
  198. [ 2991.396812] wlan0: associate with AP 00:3a:99:3c:9c:e0 (try 1)
  199. [ 2991.400396] wlan0: RX AssocResp from 00:3a:99:3c:9c:e0 (capab=0x421 status=0 aid=10)
  200. [ 2991.400406] wlan0: associated
  201. [ 2991.402050] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  202. [ 4829.324825] wlan0: deauthenticating from 00:3a:99:3c:9c:e0 by local choice (reason=3)
  203. [ 4829.749836] PM: Syncing filesystems ... done.
  204. [ 4829.765654] PM: Preparing system for mem sleep
  205. [ 4829.773112] Freezing user space processes ... (elapsed 0.00 seconds) done.
  206. [ 4829.774517] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  207. [ 4829.774576] PM: Entering mem sleep
  208. [ 4829.774596] Suspending console(s) (use no_console_suspend to debug)
  209. [ 4829.774928] btusb_intr_complete: hci0 urb ffff880028aa0a80 failed to resubmit (1)
  210. [ 4829.775909] btusb_bulk_complete: hci0 urb ffff880028aa0840 failed to resubmit (1)
  211. [ 4829.776910] btusb_bulk_complete: hci0 urb ffff880028aa0f00 failed to resubmit (1)
  212. [ 4829.792059] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  213. [ 4830.094936] sd 0:0:0:0: [sda] Stopping disk
  214. [ 4831.860345] ACPI handle has no context!
  215. [ 4831.860466] ACPI handle has no context!
  216. [ 4831.860475] sdhci-pci 0000:05:09.4: PCI INT A disabled
  217. [ 4831.860484] ACPI handle has no context!
  218. [ 4831.876103] ACPI handle has no context!
  219. [ 4831.876110] tifm_7xx1 0000:05:09.3: PCI INT A disabled
  220. [ 4831.876117] ACPI handle has no context!
  221. [ 4831.892108] ACPI handle has no context!
  222. [ 4831.908097] b43-pci-bridge 0000:05:02.0: PCI INT A disabled
  223. [ 4832.206552] radeon 0000:01:05.0: PCI INT A disabled
  224. [ 4832.220101] radeon 0000:01:05.0: power state changed by ACPI to D3
  225. [ 4832.220236] ATI IXP MC97 controller 0000:00:14.6: PCI INT B disabled
  226. [ 4832.220508] ATI IXP AC97 controller 0000:00:14.5: PCI INT B disabled
  227. [ 4832.220661] pata_atiixp 0000:00:14.1: PCI INT A disabled
  228. [ 4832.220670] ehci_hcd 0000:00:13.2: PCI INT A disabled
  229. [ 4832.220679] ohci_hcd 0000:00:13.1: PCI INT A disabled
  230. [ 4832.220687] ohci_hcd 0000:00:13.0: PCI INT A disabled
  231. [ 4832.236427] ACPI: Preparing to enter system sleep state S3
  232. [ 4832.320229] Disabling non-boot CPUs ...
  233. [ 4832.320248] Back to C!
  234. [ 4832.320248] ACPI: Waking up from system sleep state S3
  235. [ 4832.392359] pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xcff1c801)
  236. [ 4832.392397] ohci_hcd 0000:00:13.0: restoring config space at offset 0x3 (was 0x804008, writing 0x804010)
  237. [ 4832.392405] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
  238. [ 4832.392451] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
  239. [ 4832.392580] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
  240. [ 4832.392640] pci 0000:00:14.4: restoring config space at offset 0x9 (was 0xfff0, writing 0x43f04000)
  241. [ 4832.392649] pci 0000:00:14.4: restoring config space at offset 0x6 (was 0x40050500, writing 0x40090500)
  242. [ 4832.392697] ATI IXP AC97 controller 0000:00:14.5: restoring config space at offset 0x1 (was 0x4300017, writing 0x4300013)
  243. [ 4832.392741] ATI IXP MC97 controller 0000:00:14.6: restoring config space at offset 0x1 (was 0x4300017, writing 0x4300013)
  244. [ 4832.392818] 8139too 0000:05:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xc0208000)
  245. [ 4832.392825] 8139too 0000:05:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xa001)
  246. [ 4832.392832] 8139too 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
  247. [ 4832.392841] 8139too 0000:05:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
  248. [ 4832.392861] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
  249. [ 4832.392887] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0x4 (was 0x0, writing 0xc0204000)
  250. [ 4832.392894] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
  251. [ 4832.392903] b43-pci-bridge 0000:05:02.0: restoring config space at offset 0x1 (was 0x0, writing 0x6)
  252. [ 4832.392926] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c001ff)
  253. [ 4832.392933] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xe (was 0x0, writing 0xa8fc)
  254. [ 4832.392940] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xd (was 0x0, writing 0xa800)
  255. [ 4832.392947] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xc (was 0x0, writing 0xa4fc)
  256. [ 4832.392954] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xb (was 0x0, writing 0xa400)
  257. [ 4832.392961] yenta_cardbus 0000:05:09.0: restoring config space at offset 0xa (was 0x0, writing 0x47fff000)
  258. [ 4832.392968] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x9 (was 0x0, writing 0x44000000)
  259. [ 4832.392975] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000)
  260. [ 4832.392982] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000)
  261. [ 4832.392989] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0090605)
  262. [ 4832.392998] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xc020a000)
  263. [ 4832.393006] yenta_cardbus 0000:05:09.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a810)
  264. [ 4832.393245] firewire_ohci 0000:05:09.2: restoring config space at offset 0xf (was 0x4030300, writing 0x4030304)
  265. [ 4832.393271] firewire_ohci 0000:05:09.2: restoring config space at offset 0x5 (was 0x0, writing 0xc0200000)
  266. [ 4832.393278] firewire_ohci 0000:05:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xc0208800)
  267. [ 4832.393285] firewire_ohci 0000:05:09.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
  268. [ 4832.393295] firewire_ohci 0000:05:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100016)
  269. [ 4832.393323] tifm_7xx1 0000:05:09.3: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010a)
  270. [ 4832.393351] tifm_7xx1 0000:05:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0206000)
  271. [ 4832.393358] tifm_7xx1 0000:05:09.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
  272. [ 4832.393367] tifm_7xx1 0000:05:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
  273. [ 4832.393395] sdhci-pci 0000:05:09.4: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010a)
  274. [ 4832.393418] sdhci-pci 0000:05:09.4: restoring config space at offset 0x6 (was 0x0, writing 0xc0208400)
  275. [ 4832.393425] sdhci-pci 0000:05:09.4: restoring config space at offset 0x5 (was 0x0, writing 0xc0209000)
  276. [ 4832.393432] sdhci-pci 0000:05:09.4: restoring config space at offset 0x4 (was 0x0, writing 0xc0209400)
  277. [ 4832.393439] sdhci-pci 0000:05:09.4: restoring config space at offset 0x3 (was 0x800000, writing 0x804008)
  278. [ 4832.393448] sdhci-pci 0000:05:09.4: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
  279. [ 4832.463357] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  280. [ 4832.484045] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  281. [ 4832.508045] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  282. [ 4832.508091] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  283. [ 4832.509743] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  284. [ 4832.510763] atiixp: codec reset timeout
  285. [ 4832.512614] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  286. [ 4832.513183] radeon 0000:01:05.0: power state changed by ACPI to D0
  287. [ 4832.513210] radeon 0000:01:05.0: power state changed by ACPI to D0
  288. [ 4832.513236] radeon 0000:01:05.0: power state changed by ACPI to D0
  289. [ 4832.513262] radeon 0000:01:05.0: power state changed by ACPI to D0
  290. [ 4832.513266] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  291. [ 4832.513476] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
  292. [ 4832.523917] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
  293. [ 4832.523922] ------------[ cut here ]------------
  294. [ 4832.523952] WARNING: at /build/buildd-linux-2.6_2.6.32-35-amd64-aZSlKL/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/gpu/drm/radeon/r100.c:248 r100_irq_set+0x27/0xdb [radeon]()
  295. [ 4832.523955] Hardware name: HP Pavilion (EH735UA#ABA)
  296. [ 4832.523957] Can't enable IRQ/MSI because no handler is installed.
  297. [ 4832.523959] Modules linked in: hidp hid powernow_k8 cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave parport_pc ppdev lp parport sco bridge rfcomm stp bnep l2cap crc16 binfmt_misc uinput fuse loop firewire_sbp2 snd_atiixp snd_atiixp_modem snd_ac97_codec ac97_bus snd_pcm arc4 ecb radeon snd_seq b43 snd_timer rng_core ttm mac80211 snd_seq_device drm_kms_helper tifm_7xx1 yenta_socket snd drm i2c_algo_bit btusb i2c_piix4 tifm_core joydev i2c_core rsrc_nonstatic shpchp soundcore cfg80211 bluetooth snd_page_alloc rfkill pci_hotplug video output psmouse evdev edac_core edac_mce_amd k8temp ac serio_raw pcspkr wmi processor battery button ext3 jbd mbcache sg sr_mod cdrom sd_mod crc_t10dif ata_generic ssb sdhci_pci sdhci ohci_hcd pata_atiixp firewire_ohci thermal mmc_core 8139too pcmcia libata ehci_hcd led_class thermal_sys firewire_core crc_itu_t 8139cp mii pcmcia_core scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan]
  298. [ 4832.524033] Pid: 5102, comm: pm-suspend Tainted: G W 2.6.32-5-amd64 #1
  299. [ 4832.524036] Call Trace:
  300. [ 4832.524054] [<ffffffffa047539b>] ? r100_irq_set+0x27/0xdb [radeon]
  301. [ 4832.524070] [<ffffffffa047539b>] ? r100_irq_set+0x27/0xdb [radeon]
  302. [ 4832.524075] [<ffffffff8104df20>] ? warn_slowpath_common+0x77/0xa3
  303. [ 4832.524079] [<ffffffff8104dfa8>] ? warn_slowpath_fmt+0x51/0x59
  304. [ 4832.524085] [<ffffffff81195849>] ? delay_tsc+0x30/0x73
  305. [ 4832.524089] [<ffffffff81195849>] ? delay_tsc+0x30/0x73
  306. [ 4832.524104] [<ffffffffa047a10b>] ? rs400_gart_tlb_flush+0x2a/0x53 [radeon]
  307. [ 4832.524119] [<ffffffffa047a3ff>] ? rs400_gart_enable+0x2cb/0x2d8 [radeon]
  308. [ 4832.524135] [<ffffffffa047539b>] ? r100_irq_set+0x27/0xdb [radeon]
  309. [ 4832.524150] [<ffffffffa047a44b>] ? rs400_startup+0x3f/0x114 [radeon]
  310. [ 4832.524163] [<ffffffffa044dc29>] ? radeon_resume_kms+0x6a/0xa3 [radeon]
  311. [ 4832.524168] [<ffffffff812247d6>] ? pm_op+0x64/0xdb
  312. [ 4832.524171] [<ffffffff81224eae>] ? dpm_resume_end+0x8e/0x362
  313. [ 4832.524176] [<ffffffff8107bc6c>] ? suspend_devices_and_enter+0x175/0x1a6
  314. [ 4832.524180] [<ffffffff8107bd96>] ? enter_state+0xf9/0x13a
  315. [ 4832.524183] [<ffffffff8107b5a0>] ? state_store+0xb4/0xd4
  316. [ 4832.524189] [<ffffffff8113f238>] ? sysfs_write_file+0xd0/0x107
  317. [ 4832.524193] [<ffffffff810ef384>] ? vfs_write+0xa9/0x102
  318. [ 4832.524197] [<ffffffff810ef499>] ? sys_write+0x45/0x6e
  319. [ 4832.524201] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
  320. [ 4832.524204] ---[ end trace 746e78a71031163a ]---
  321. [ 4832.524207] [drm] radeon: cp idle (0x10000C03)
  322. [ 4832.524259] [drm] Loading R300 Microcode
  323. [ 4832.524262] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
  324. [ 4832.672713] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
  325. [ 4832.672717] ata2.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
  326. [ 4832.688677] ata2.00: configured for MWDMA2
  327. [ 4834.408608] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
  328. [ 4834.408613] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
  329. [ 4834.852793] ata1.00: configured for UDMA/100
  330. [ 4892.524075] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
  331. [ 4892.524078] [drm:r100_cp_init] *ERROR* Failed to load firmware!
  332. [ 4892.524080] radeon 0000:01:05.0: failled initializing CP (-2).
  333. [ 4892.609767] b43-pci-bridge 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  334. [ 4892.840044] tifm_7xx1 0000:05:09.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  335. [ 4892.840079] firewire_core: skipped bus generations, destroying all nodes
  336. [ 4892.840118] sdhci-pci 0000:05:09.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  337. [ 4893.172040] sd 0:0:0:0: [sda] Starting disk
  338. [ 4893.340055] firewire_core: rediscovered device fw0
  339. [ 4893.692043] usb 3-3: reset full speed USB device using ohci_hcd and address 2
  340. [ 4893.897088] btusb 3-3:1.0: no reset_resume for driver btusb?
  341. [ 4893.897090] btusb 3-3:1.1: no reset_resume for driver btusb?
  342. [ 4894.148821] PM: Finishing wakeup.
  343. [ 4894.148824] Restarting tasks ... done.
  344. [ 4894.480816] eth0: link down
  345. [ 4894.481133] ADDRCONF(NETDEV_UP): eth0: link is not ready
  346. [ 4894.700995] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
  347. [ 4894.788743] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  348. [ 4896.636586] wlan0: direct probe to AP 00:3a:99:3c:9c:e0 (try 1)
  349. [ 4896.639083] wlan0: direct probe responded
  350. [ 4896.639091] wlan0: authenticate with AP 00:3a:99:3c:9c:e0 (try 1)
  351. [ 4896.642332] wlan0: authenticated
  352. [ 4896.642359] wlan0: associate with AP 00:3a:99:3c:9c:e0 (try 1)
  353. [ 4896.646656] wlan0: RX AssocResp from 00:3a:99:3c:9c:e0 (capab=0x421 status=0 aid=3)
  354. [ 4896.646663] wlan0: associated
  355. [ 4896.647990] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement