Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # dmesg
- [ 0.000000] Linux version 3.10.36 (catalinp@catu2) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r41004) ) #3 Thu Jun 5 03:19:48 EDT 2014
- [ 0.000000] CPU revision is: 00029007 (Broadcom BMIPS3300)
- [ 0.000000] bcm47xx: using ssb bus
- [ 0.000000] ssb: Found chip with id 0x4712, rev 0x01 and package 0x00
- [ 0.000000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x09, vendor 0x4243)
- [ 0.000000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x07, vendor 0x4243)
- [ 0.000000] ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
- [ 0.000000] ssb: Core 3 found: USB 1.1 Device (cc 0x818, rev 0x01, vendor 0x4243)
- [ 0.000000] ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x01, vendor 0x4243)
- [ 0.000000] ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x01, vendor 0x4243)
- [ 0.000000] ssb: Core 6 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243)
- [ 0.000000] ssb: Core 7 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
- [ 0.000000] ssb: chipcommon status is 0x0
- [ 0.000000] ssb: Initializing MIPS core...
- [ 0.000000] ssb: set_irq: core 0x0812, irq 4 => 4
- [ 0.000000] ssb: set_irq: core 0x0806, irq 5 => 5
- [ 0.000000] ssb: set_irq: core 0x0818, irq 6 => 2
- [ 0.000000] ssb: set_irq: core 0x0804, irq 2 => 6
- [ 0.000000] ssb: after irq reconfiguration
- [ 0.000000] ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I
- [ 0.000000] ssb: core 0x0812, irq : 2(S) 3 4* 5 6 D I
- [ 0.000000] ssb: core 0x0806, irq : 2(S) 3 4 5* 6 D I
- [ 0.000000] ssb: core 0x0818, irq : 2(S)* 3 4 5 6 D I
- [ 0.000000] ssb: core 0x0817, irq : 2(S)* 3 4 5 6 D I
- [ 0.000000] ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I
- [ 0.000000] ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I*
- [ 0.000000] ssb: core 0x0804, irq : 2(S) 3 4 5 6* D I
- [ 0.000000] can not parse nvram name (null)ag0(null) with value 255 got -34
- [ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
- [ 0.000000] MIPS: machine is Linksys WRT54G/GS/GL
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 02000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
- [ 0.000000] On node 0 totalpages: 8192
- [ 0.000000] free_area_init_node: node 0, pgdat 802949e0, node_mem_map 81000000
- [ 0.000000] Normal zone: 64 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
- [ 0.000000] Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
- [ 0.000000] Kernel command line: netconsole=@192.168.2.1/eth0,4919@192.168.2.255/
- [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
- [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Memory: 29256k/32768k available (2307k kernel code, 3512k reserved, 407k data, 224k init, 0k highmem)
- [ 0.000000] NR_IRQS:128
- [ 0.070000] Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
- [ 0.070000] pid_max: default: 32768 minimum: 301
- [ 0.070000] Mount-cache hash table entries: 512
- [ 0.080000] NET: Registered protocol family 16
- [ 0.140000] bio: create slab <bio-0> at 0
- [ 0.150000] Switching to clocksource MIPS
- [ 0.170000] ssb: PCIcore in host mode found
- [ 0.470000] PCI host bridge to bus 0000:00
- [ 0.470000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
- [ 0.470000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
- [ 0.470000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.470000] pci 0000:00:00.0: [14e4:4712] type 00 class 0x060000
- [ 0.470000] ssb: PCI: Fixing up bridge 0000:00:00.0
- [ 0.470000] pci 0000:00:00.0: setting latency timer to 64
- [ 0.470000] ssb: PCI: Fixing up device 0000:00:00.0
- [ 0.470000] ssb: PCI: Fixing latency timer of device 0000:00:00.0 to 168
- [ 0.470000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.470000] pci 0000:00:00.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.480000] pci 0000:00:01.0: [14e4:4712] type 00 class 0x060000
- [ 0.480000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.480000] pci 0000:00:01.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.480000] pci 0000:00:02.0: [14e4:4712] type 00 class 0x060000
- [ 0.480000] pci 0000:00:02.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.480000] pci 0000:00:02.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.480000] pci 0000:00:03.0: [14e4:4712] type 00 class 0x060000
- [ 0.480000] pci 0000:00:03.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.480000] pci 0000:00:03.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.480000] pci 0000:00:04.0: [14e4:4712] type 00 class 0x060000
- [ 0.480000] pci 0000:00:04.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.480000] pci 0000:00:04.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.490000] pci 0000:00:05.0: [14e4:4712] type 00 class 0x060000
- [ 0.490000] pci 0000:00:05.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.490000] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.490000] pci 0000:00:06.0: [14e4:4712] type 00 class 0x060000
- [ 0.490000] pci 0000:00:06.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.490000] pci 0000:00:06.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.490000] pci 0000:00:07.0: [14e4:4712] type 00 class 0x060000
- [ 0.490000] pci 0000:00:07.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.490000] pci 0000:00:07.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.490000] pci 0000:00:08.0: [14e4:4712] type 00 class 0x060000
- [ 0.490000] pci 0000:00:08.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.490000] pci 0000:00:08.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.500000] pci 0000:00:09.0: [14e4:4712] type 00 class 0x060000
- [ 0.500000] pci 0000:00:09.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.500000] pci 0000:00:09.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.500000] pci 0000:00:0a.0: [14e4:4712] type 00 class 0x060000
- [ 0.500000] pci 0000:00:0a.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.500000] pci 0000:00:0a.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.500000] pci 0000:00:0b.0: [14e4:4712] type 00 class 0x060000
- [ 0.500000] pci 0000:00:0b.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.500000] pci 0000:00:0b.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.510000] pci 0000:00:0c.0: [14e4:4712] type 00 class 0x060000
- [ 0.510000] pci 0000:00:0c.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.510000] pci 0000:00:0c.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.510000] pci 0000:00:0d.0: [14e4:4712] type 00 class 0x060000
- [ 0.510000] pci 0000:00:0d.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.510000] pci 0000:00:0d.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.510000] pci 0000:00:0e.0: [14e4:4712] type 00 class 0x060000
- [ 0.510000] pci 0000:00:0e.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.510000] pci 0000:00:0e.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.510000] pci 0000:00:0f.0: [14e4:4712] type 00 class 0x060000
- [ 0.510000] pci 0000:00:0f.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 0.510000] pci 0000:00:0f.0: reg 14: [mem 0x00000000-0x07ffffff pref]
- [ 0.520000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.540000] NET: Registered protocol family 2
- [ 0.540000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
- [ 0.540000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.540000] TCP: Hash tables configured (established 512 bind 512)
- [ 0.540000] TCP: reno registered
- [ 0.540000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.540000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.540000] NET: Registered protocol family 1
- [ 0.540000] PCI: CLS 0 bytes, default 16
- [ 0.560000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.560000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.560000] msgmni has been set to 57
- [ 0.560000] io scheduler noop registered
- [ 0.560000] io scheduler deadline registered (default)
- [ 0.570000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
- [ 0.590000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
- [ 4.160000] console [ttyS0] enabled
- [ 4.220000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
- [ 4.310000] physmap platform flash device: 02000001 at 1c000000
- [ 4.380000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x000017
- [ 4.510000] physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0
- [ 4.510000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
- [ 4.510000] physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0
- [ 4.510000] Intel/Sharp Extended Query Table at 0x0031
- [ 4.570000] Intel/Sharp Extended Query Table at 0x0031
- [ 4.630000] Using buffer write method
- [ 4.680000] cfi_cmdset_0001: Erase suspend on write enabled
- [ 4.740000] erase region 0: offset=0x0,size=0x20000,blocks=64
- [ 4.750000] 6 bcm47xxpart partitions found on MTD device physmap-flash.0
- [ 4.840000] Creating 6 MTD partitions on "physmap-flash.0":
- [ 4.900000] 0x000000000000-0x000000040000 : "boot"
- [ 4.970000] 0x000000040000-0x0000007e0000 : "firmware"
- [ 5.040000] 0x00000004001c-0x00000004090c : "loader"
- [ 5.110000] 0x00000004090c-0x00000012d800 : "linux"
- [ 5.170000] mtd: partition "linux" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 5.320000] 0x00000012d800-0x0000007e0000 : "rootfs"
- [ 5.380000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 5.540000] mtd: device 4 (rootfs) set to be root filesystem
- [ 5.610000] mtd: partition "rootfs_data" created automatically, ofs=0x580000, len=0x260000
- [ 5.710000] 0x000000580000-0x0000007e0000 : "rootfs_data"
- [ 5.780000] 0x0000007e0000-0x000000800000 : "nvram"
- [ 5.870000] libphy: Fixed MDIO Bus: probed
- [ 5.920000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
- [ 6.030000] GPIO_WDT: failed to register misc device
- [ 6.100000] TCP: cubic registered
- [ 6.140000] NET: Registered protocol family 17
- [ 6.190000] 8021q: 802.1Q VLAN Support v1.8
- [ 6.250000] netpoll: netconsole: local port 6665
- [ 6.310000] netpoll: netconsole: local IPv4 address 192.168.2.1
- [ 6.380000] netpoll: netconsole: interface 'eth0'
- [ 6.430000] netpoll: netconsole: remote port 4919
- [ 6.490000] netpoll: netconsole: remote IPv4 address 192.168.2.255
- [ 6.570000] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
- [ 6.650000] netpoll: netconsole: eth0 doesn't exist, aborting
- [ 6.720000] netconsole: cleaning up
- [ 6.770000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
- [ 6.860000] Freeing unused kernel memory: 224K (802a8000 - 802e0000)
- [ 12.070000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
- [ 12.160000] libphy: b44_eth_mii: probed
- [ 12.210000] adm6996: adm6996_gpio: ADM6996L model PHY found.
- [ 12.300000] b44 ssb0:1: could not find PHY at 30, use fixed one
- [ 12.370000] b44 ssb0:1: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00)
- [ 12.470000] b44 ssb0:1 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:0f:66:XX:XX:XX
- [ 12.580000] gpio-keys gpio-keys.0: unable to claim gpio 6, err=-16
- [ 12.660000] gpio-keys: probe of gpio-keys.0 failed with error -16
- [ 12.800000] b44 ssb0:1 eth0: Link is down
- [ 12.900000] leds-gpio: probe of leds-gpio failed with error -16
- [ 13.850000] b44 ssb0:1 eth0: Link is down
- [ 14.370000] b44 ssb0:1 eth0: Link is up at 100 Mbps, full duplex
- [ 14.440000] b44 ssb0:1 eth0: Flow control is off for TX and off for RX
- [ 23.870000] jffs2: notice: (248) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 36 of xref (0 dead, 24 orphan) found.
- [ 32.390000] jffs2: notice: (245) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 36 of xref (0 dead, 24 orphan) found.
- [ 36.590000] b44 ssb0:1 eth0: powering down PHY
- [ 37.580000] b44 ssb0:1 eth0: Link is down
- [ 48.140000] NET: Registered protocol family 10
- [ 48.210000] tun: Universal TUN/TAP device driver, 1.6
- [ 48.270000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 48.370000] nf_conntrack version 0.5.0 (460 buckets, 1840 max)
- [ 48.460000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 48.580000] u32 classifier
- [ 48.620000] input device check on
- [ 48.660000] Actions configured
- [ 48.710000] Mirror/redirect action on
- [ 48.770000] Failed to load ipt action
- [ 48.930000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
- [ 49.020000] Backport generated by backports.git backports-20140320-37-g5c33da0
- [ 49.300000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 49.520000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 49.600000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 49.680000] Netfilter messages via NETLINK v0.30.
- [ 49.920000] xt_time: kernel timezone is -0000
- [ 50.050000] cfg80211: Calling CRDA to update world regulatory domain
- [ 50.210000] cfg80211: World regulatory domain updated:
- [ 50.270000] cfg80211: DFS Master region: unset
- [ 50.320000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 50.440000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 50.540000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 50.630000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 50.730000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 50.820000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 50.920000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 51.310000] b43-phy0: Broadcom 4712 WLAN found (core revision 7)
- [ 51.400000] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
- [ 51.470000] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
- [ 51.500000] Broadcom 43xx driver loaded [ Features: PL ]
- [ 51.640000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 73.250000] b44 ssb0:1 eth0: Link is down
- [ 73.300000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 73.380000] b44 ssb0:1 eth0: Link is up at 100 Mbps, full duplex
- [ 73.450000] b44 ssb0:1 eth0: Flow control is off for TX and off for RX
- [ 73.790000] device eth0.1 entered promiscuous mode
- [ 73.840000] device eth0 entered promiscuous mode
- [ 74.200000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 74.400000] br-lan: port 1(eth0.1) entered forwarding state
- [ 74.460000] br-lan: port 1(eth0.1) entered forwarding state
- [ 76.460000] br-lan: port 1(eth0.1) entered forwarding state
- [ 77.710000] cfg80211: Calling CRDA for country: CA
- [ 77.860000] cfg80211: Regulatory domain changed to country: CA
- [ 77.930000] cfg80211: DFS Master region: FCC
- [ 77.980000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 78.090000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
- [ 78.190000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
- [ 78.290000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
- [ 78.380000] cfg80211: (5490000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
- [ 78.480000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
- [ 82.470000] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
- [ 82.740000] b43-phy0 debug: Chip initialized
- [ 82.740000] b43-phy0 debug: 30-bit DMA initialized
- [ 82.740000] b43-phy0 debug: QoS enabled
- [ 82.750000] b43-phy0 debug: Wireless interface started
- [ 82.750000] b43-phy0 debug: Adding Interface type 3
- [ 82.750000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 82.930000] b43-phy0 debug: Set beacon interval to 100
- [ 82.930000] b43-phy0 debug: Updated beacon template at 0x68
- [ 82.930000] b43-phy0 debug: Updated beacon template at 0x468
- [ 82.930000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 280.480000] b43-phy0 debug: Updated beacon template at 0x468
- [ 280.500000] b43-phy0 debug: Updated beacon template at 0x68
- [ 287.470000] b43-phy0 debug: Updated beacon template at 0x468
- [ 287.670000] b43-phy0 debug: Updated beacon template at 0x68
- [ 312.830000] b43-phy0 debug: Updated beacon template at 0x468
- [ 312.860000] b43-phy0 debug: Updated beacon template at 0x68
- [ 313.270000] b43-phy0 debug: Updated beacon template at 0x468
- [ 313.480000] b43-phy0 debug: Updated beacon template at 0x68
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement