Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@NOA-OfficeGW:~# iw list
- Wiphy phy1
- Band 1:
- Capabilities: 0x11ef
- RX LDPC
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 3839 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-23
- Frequencies:
- * 5180 MHz [36] (17.0 dBm)
- * 5200 MHz [40] (17.0 dBm)
- * 5220 MHz [44] (17.0 dBm)
- * 5240 MHz [48] (17.0 dBm)
- * 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5500 MHz [100] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5520 MHz [104] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5540 MHz [108] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5560 MHz [112] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5580 MHz [116] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5600 MHz [120] (disabled)
- * 5620 MHz [124] (disabled)
- * 5640 MHz [128] (disabled)
- * 5660 MHz [132] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5680 MHz [136] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5700 MHz [140] (20.0 dBm) (passive scanning, no IBSS, radar detection)
- * 5745 MHz [149] (30.0 dBm)
- * 5765 MHz [153] (30.0 dBm)
- * 5785 MHz [157] (30.0 dBm)
- * 5805 MHz [161] (30.0 dBm)
- * 5825 MHz [165] (30.0 dBm)
- Bitrates (non-HT):
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- max # scan SSIDs: 4
- max scan IEs length: 2261 bytes
- Coverage class: 0 (up to 0m)
- Supported Ciphers:
- * WEP40 (00-0f-ac:1)
- * WEP104 (00-0f-ac:5)
- * TKIP (00-0f-ac:2)
- * CCMP (00-0f-ac:4)
- * CMAC (00-0f-ac:6)
- Available Antennas: TX 0x7 RX 0x7
- Configured Antennas: TX 0x7 RX 0x7
- Supported interface modes:
- * IBSS
- * managed
- * AP
- * AP/VLAN
- * WDS
- * monitor
- * mesh point
- * P2P-client
- * P2P-GO
- software interface modes (can always be added):
- * AP/VLAN
- * monitor
- valid interface combinations:
- * #{ managed, WDS, P2P-client } <= 2048, #{ IBSS, AP, mesh point, P2P-GO } <= 8,
- total <= 2048, #channels <= 1
- Supported commands:
- * new_interface
- * set_interface
- * new_key
- * new_beacon
- * new_station
- * new_mpath
- * set_mesh_params
- * set_bss
- * authenticate
- * associate
- * deauthenticate
- * disassociate
- * join_ibss
- * join_mesh
- * remain_on_channel
- * set_tx_bitrate_mask
- * action
- * frame_wait_cancel
- * set_wiphy_netns
- * set_channel
- * set_wds_peer
- * Unknown command (82)
- * Unknown command (81)
- * Unknown command (84)
- * Unknown command (87)
- * Unknown command (85)
- * connect
- * disconnect
- Supported TX frame types:
- * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- Supported RX frame types:
- * IBSS: 0x00b0 0x00c0 0x00d0
- * managed: 0x0040 0x00d0
- * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
- * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
- * mesh point: 0x00b0 0x00c0 0x00d0
- * P2P-client: 0x0040 0x00d0
- * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
- Device supports RSN-IBSS.
- HT Capability overrides:
- * MCS: ff ff ff ff ff ff ff ff ff ff
- * maximum A-MSDU length
- * supported channel width
- * short GI for 40 MHz
- * max A-MPDU length exponent
- * min MPDU start spacing
- Device supports TX status socket option.
- Device supports HT-IBSS.
- Wiphy phy0
- Band 1:
- Capabilities: 0x11ef
- RX LDPC
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 3839 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-15
- Frequencies:
- * 2412 MHz [1] (27.0 dBm)
- * 2417 MHz [2] (27.0 dBm)
- * 2422 MHz [3] (27.0 dBm)
- * 2427 MHz [4] (27.0 dBm)
- * 2432 MHz [5] (27.0 dBm)
- * 2437 MHz [6] (27.0 dBm)
- * 2442 MHz [7] (27.0 dBm)
- * 2447 MHz [8] (27.0 dBm)
- * 2452 MHz [9] (27.0 dBm)
- * 2457 MHz [10] (27.0 dBm)
- * 2462 MHz [11] (27.0 dBm)
- * 2467 MHz [12] (disabled)
- * 2472 MHz [13] (disabled)
- * 2484 MHz [14] (disabled)
- Bitrates (non-HT):
- * 1.0 Mbps
- * 2.0 Mbps (short preamble supported)
- * 5.5 Mbps (short preamble supported)
- * 11.0 Mbps (short preamble supported)
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- max # scan SSIDs: 4
- max scan IEs length: 2257 bytes
- Coverage class: 0 (up to 0m)
- Supported Ciphers:
- * WEP40 (00-0f-ac:1)
- * WEP104 (00-0f-ac:5)
- * TKIP (00-0f-ac:2)
- * CCMP (00-0f-ac:4)
- * CMAC (00-0f-ac:6)
- Available Antennas: TX 0x3 RX 0x3
- Configured Antennas: TX 0x3 RX 0x3
- Supported interface modes:
- * IBSS
- * managed
- * AP
- * AP/VLAN
- * WDS
- * monitor
- * mesh point
- * P2P-client
- * P2P-GO
- software interface modes (can always be added):
- * AP/VLAN
- * monitor
- valid interface combinations:
- * #{ managed, WDS, P2P-client } <= 2048, #{ IBSS, AP, mesh point, P2P-GO } <= 8,
- total <= 2048, #channels <= 1
- Supported commands:
- * new_interface
- * set_interface
- * new_key
- * new_beacon
- * new_station
- * new_mpath
- * set_mesh_params
- * set_bss
- * authenticate
- * associate
- * deauthenticate
- * disassociate
- * join_ibss
- * join_mesh
- * remain_on_channel
- * set_tx_bitrate_mask
- * action
- * frame_wait_cancel
- * set_wiphy_netns
- * set_channel
- * set_wds_peer
- * Unknown command (82)
- * Unknown command (81)
- * Unknown command (84)
- * Unknown command (87)
- * Unknown command (85)
- * connect
- * disconnect
- Supported TX frame types:
- * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
- Supported RX frame types:
- * IBSS: 0x00b0 0x00c0 0x00d0
- * managed: 0x0040 0x00d0
- * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
- * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
- * mesh point: 0x00b0 0x00c0 0x00d0
- * P2P-client: 0x0040 0x00d0
- * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
- Device supports RSN-IBSS.
- HT Capability overrides:
- * MCS: ff ff ff ff ff ff ff ff ff ff
- * maximum A-MSDU length
- * supported channel width
- * short GI for 40 MHz
- * max A-MPDU length exponent
- * min MPDU start spacing
- Device supports TX status socket option.
- Device supports HT-IBSS.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement