API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 7th, 2014
193
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.01 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Caviar SE
  6. Device Model: WDC WD800JB-00JJC0
  7. Serial Number: WD-WCAM9S558205
  8. Firmware Version: 05.01C05
  9. User Capacity: 80.026.361.856 bytes [80,0 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: 6
  13. ATA Standard is: Exact ATA specification draft version not indicated
  14. Local Time is: Tue Oct 7 19:44:44 2014 EEST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x84) Offline data collection activity
  23. was suspended by an interrupting command from host.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 2460) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. No General Purpose Logging support.
  44. Short self-test routine
  45. recommended polling time: ( 2) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 35) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 5) minutes.
  50. SCT capabilities: (0x003f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
  59. 3 Spin_Up_Time 0x0003 186 161 021 Pre-fail Always - 1691
  60. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1123
  61. 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 5
  62. 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
  63. 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 21669
  64. 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  65. 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
  66. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1051
  67. 194 Temperature_Celsius 0x0022 110 079 000 Old_age Always - 33
  68. 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
  69. 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
  70. 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
  71. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  72. 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
  73.  
  74. SMART Error Log Version: 1
  75. ATA Error Count: 11 (device log contains only the most recent five errors)
  76. CR = Command Register [HEX]
  77. FR = Features Register [HEX]
  78. SC = Sector Count Register [HEX]
  79. SN = Sector Number Register [HEX]
  80. CL = Cylinder Low Register [HEX]
  81. CH = Cylinder High Register [HEX]
  82. DH = Device/Head Register [HEX]
  83. DC = Device Command Register [HEX]
  84. ER = Error register [HEX]
  85. ST = Status register [HEX]
  86. Powered_Up_Time is measured from power on, and printed as
  87. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  88. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  89.  
  90. Error 11 occurred at disk power-on lifetime: 16847 hours (701 days + 23 hours)
  91. When the command that caused the error occurred, the device was active or idle.
  92.  
  93. After command completion occurred, registers were:
  94. ER ST SC SN CL CH DH
  95. -- -- -- -- -- -- --
  96. 40 51 42 fe f7 1a e9 Error: UNC 66 sectors at LBA = 0x091af7fe = 152762366
  97.  
  98. Commands leading to the command that caused the error were:
  99. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  100. -- -- -- -- -- -- -- -- ---------------- --------------------
  101. c8 00 c0 80 f7 1a 09 58 1d+03:00:11.935 READ DMA
  102. c8 00 08 f8 15 44 02 58 1d+03:00:11.920 READ DMA
  103. c8 00 08 10 39 5b 06 58 1d+03:00:11.555 READ DMA
  104. c8 00 50 a8 38 5b 06 58 1d+03:00:11.555 READ DMA
  105. c8 00 08 98 38 5b 06 58 1d+03:00:11.540 READ DMA
  106.  
  107. Error 10 occurred at disk power-on lifetime: 16845 hours (701 days + 21 hours)
  108. When the command that caused the error occurred, the device was active or idle.
  109.  
  110. After command completion occurred, registers were:
  111. ER ST SC SN CL CH DH
  112. -- -- -- -- -- -- --
  113. 40 51 02 fe f7 1a e9 Error: UNC 2 sectors at LBA = 0x091af7fe = 152762366
  114.  
  115. Commands leading to the command that caused the error were:
  116. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  117. -- -- -- -- -- -- -- -- ---------------- --------------------
  118. c8 00 08 f8 f7 1a 09 58 1d+00:44:11.115 READ DMA
  119. c8 00 08 58 f8 1a 09 58 1d+00:44:11.115 READ DMA
  120. c8 00 08 50 f8 1a 09 58 1d+00:44:11.115 READ DMA
  121. c8 00 08 68 34 44 02 58 1d+00:44:11.110 READ DMA
  122. c8 00 08 48 f8 1a 09 58 1d+00:44:11.110 READ DMA
  123.  
  124. Error 9 occurred at disk power-on lifetime: 16831 hours (701 days + 7 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 40 51 02 fe f7 1a e9 Error: UNC 2 sectors at LBA = 0x091af7fe = 152762366
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. c8 00 08 f8 f7 1a 09 58 11:17:42.120 READ DMA
  136. f8 00 00 00 00 00 00 58 11:17:42.050 READ NATIVE MAX ADDRESS
  137. ec 00 00 00 00 00 00 58 11:17:42.045 IDENTIFY DEVICE
  138. ef 03 45 00 00 00 00 58 11:17:42.045 SET FEATURES [Set transfer mode]
  139. f8 00 00 00 00 00 00 58 11:17:42.045 READ NATIVE MAX ADDRESS
  140.  
  141. Error 8 occurred at disk power-on lifetime: 16831 hours (701 days + 7 hours)
  142. When the command that caused the error occurred, the device was active or idle.
  143.  
  144. After command completion occurred, registers were:
  145. ER ST SC SN CL CH DH
  146. -- -- -- -- -- -- --
  147. 40 51 02 fe f7 1a e9 Error: UNC 2 sectors at LBA = 0x091af7fe = 152762366
  148.  
  149. Commands leading to the command that caused the error were:
  150. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  151. -- -- -- -- -- -- -- -- ---------------- --------------------
  152. c8 00 08 f8 f7 1a 09 58 11:17:39.980 READ DMA
  153. f8 00 00 00 00 00 00 58 11:17:39.865 READ NATIVE MAX ADDRESS
  154. ec 00 00 00 00 00 00 58 11:17:39.860 IDENTIFY DEVICE
  155. ef 03 45 00 00 00 00 58 11:17:39.860 SET FEATURES [Set transfer mode]
  156. f8 00 00 00 00 00 00 58 11:17:39.860 READ NATIVE MAX ADDRESS
  157.  
  158. Error 7 occurred at disk power-on lifetime: 16831 hours (701 days + 7 hours)
  159. When the command that caused the error occurred, the device was active or idle.
  160.  
  161. After command completion occurred, registers were:
  162. ER ST SC SN CL CH DH
  163. -- -- -- -- -- -- --
  164. 40 51 02 fe f7 1a e9 Error: UNC 2 sectors at LBA = 0x091af7fe = 152762366
  165.  
  166. Commands leading to the command that caused the error were:
  167. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  168. -- -- -- -- -- -- -- -- ---------------- --------------------
  169. c8 00 08 f8 f7 1a 09 58 11:17:37.930 READ DMA
  170. e7 00 00 37 0c c2 00 58 11:17:37.705 FLUSH CACHE
  171. ca 00 08 30 0c c2 04 58 11:17:37.700 WRITE DMA
  172. e7 00 00 2f 0c c2 00 58 11:17:37.680 FLUSH CACHE
  173. ca 00 48 e8 0b c2 04 58 11:17:37.680 WRITE DMA
  174.  
  175. SMART Self-test log structure revision number 1
  176. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  177.  
  178.  
  179. SMART Selective self-test log data structure revision number 1
  180. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  181. 1 0 0 Not_testing
  182. 2 0 0 Not_testing
  183. 3 0 0 Not_testing
  184. 4 0 0 Not_testing
  185. 5 0 0 Not_testing
  186. Selective self-test flags (0x0):
  187. After scanning selected spans, do NOT read-scan remainder of disk.
  188. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!