Advertisement
Arrta

lspci

Jul 8th, 2012
104
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.68 KB | None | 0 0
  1. # lspci
  2. 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
  3. 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
  4. 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
  5. 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
  6. 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
  7. 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
  8. 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
  9. 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
  10. 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
  11. 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
  12. 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
  13. 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
  14. 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
  15. 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
  16. 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
  17. 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02)
  18. 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
  19. 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
  20. 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 02)
  21. 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
  22. 11:00.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
  23. 11:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
  24. 11:02.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
  25.  
  26. # lspci -vvv
  27. 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
  28. Subsystem: Super Micro Computer Inc Device d780
  29. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
  30. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  31. Latency: 0
  32. Capabilities: [e0] Vendor Specific Information: Len=0b <?>
  33. Kernel driver in use: agpgart-intel
  34.  
  35. 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
  36. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
  37. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  38. Latency: 0, Cache Line Size: 32 bytes
  39. Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
  40. I/O behind bridge: 00002000-00002fff
  41. Memory behind bridge: d0100000-d01fffff
  42. Prefetchable memory behind bridge: 00000000d0400000-00000000d04fffff
  43. Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  44. BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  45. PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  46. Capabilities: [88] Subsystem: Super Micro Computer Inc Device d780
  47. Capabilities: [80] Power Management version 3
  48. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  49. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  50. Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  51. Address: fee0f00c Data: 41a8
  52. Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
  53. DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  54. ExtTag- RBE+ FLReset-
  55. DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  56. RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  57. MaxPayload 128 bytes, MaxReadReq 128 bytes
  58. DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  59. LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <1us, L1 <4us
  60. ClockPM- Surprise- LLActRep- BwNot-
  61. LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
  62. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  63. LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  64. SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  65. Slot #4096, PowerLimit 10.000W; Interlock- NoCompl+
  66. SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  67. Control: AttnInd Off, PwrInd On, Power- Interlock-
  68. SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  69. Changed: MRL- PresDet- LinkState-
  70. RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  71. RootCap: CRSVisible-
  72. RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  73. Capabilities: [100 v1] Virtual Channel
  74. Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  75. Arb: Fixed- WRR32- WRR64- WRR128-
  76. Ctrl: ArbSelect=Fixed
  77. Status: InProgress-
  78. VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  79. Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  80. Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  81. Status: NegoPending- InProgress-
  82. Capabilities: [140 v1] Root Complex Link
  83. Desc: PortNumber=02 ComponentID=01 EltType=Config
  84. Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
  85. Addr: 00000000fed19000
  86. Kernel driver in use: pcieport
  87.  
  88. 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
  89. Subsystem: Super Micro Computer Inc Device d780
  90. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  91. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  92. Latency: 0
  93. Interrupt: pin A routed to IRQ 295
  94. Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=512K]
  95. Region 1: I/O ports at 1c60 [size=8]
  96. Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
  97. Region 3: Memory at d0000000 (32-bit, non-prefetchable) [size=1M]
  98. Expansion ROM at <unassigned> [disabled]
  99. Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  100. Address: fee0100c Data: 41b0
  101. Capabilities: [d0] Power Management version 2
  102. Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  103. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  104. Kernel driver in use: i915
  105.  
  106. 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
  107. Subsystem: Super Micro Computer Inc Device 10bd
  108. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
  109. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  110. Latency: 0
  111. Interrupt: pin A routed to IRQ 297
  112. Region 0: Memory at d0580000 (32-bit, non-prefetchable) [size=128K]
  113. Region 1: Memory at d05a4000 (32-bit, non-prefetchable) [size=4K]
  114. Region 2: I/O ports at 1820 [size=32]
  115. Capabilities: [c8] Power Management version 2
  116. Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  117. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
  118. Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
  119. Address: 00000000fee0200c Data: 4149
  120. Capabilities: [e0] PCI Advanced Features
  121. AFCap: TP+ FLR+
  122. AFCtrl: FLR-
  123. AFStatus: TP-
  124. Kernel driver in use: e1000e
  125.  
  126. 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
  127. Subsystem: Super Micro Computer Inc Device d780
  128. Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  129. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  130. Latency: 0
  131. Interrupt: pin A routed to IRQ 16
  132. Region 4: I/O ports at 1840 [size=32]
  133. Capabilities: [50] PCI Advanced Features
  134. AFCap: TP+ FLR+
  135. AFCtrl: FLR-
  136. AFStatus: TP-
  137. Kernel driver in use: uhci_hcd
  138.  
  139. 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
  140. Subsystem: Super Micro Computer Inc Device d780
  141. Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  142. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  143. Latency: 0
  144. Interrupt: pin B routed to IRQ 17
  145. Region 4: I/O ports at 1860 [size=32]
  146. Capabilities: [50] PCI Advanced Features
  147. AFCap: TP+ FLR+
  148. AFCtrl: FLR-
  149. AFStatus: TP-
  150. Kernel driver in use: uhci_hcd
  151.  
  152. 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
  153. Subsystem: Super Micro Computer Inc Device d780
  154. Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  155. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  156. Latency: 0
  157. Interrupt: pin C routed to IRQ 18
  158. Region 4: I/O ports at 1880 [size=32]
  159. Capabilities: [50] PCI Advanced Features
  160. AFCap: TP+ FLR+
  161. AFCtrl: FLR-
  162. AFStatus: TP-
  163. Kernel driver in use: uhci_hcd
  164.  
  165. 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
  166. Subsystem: Super Micro Computer Inc Device d780
  167. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
  168. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  169. Latency: 0
  170. Interrupt: pin C routed to IRQ 18
  171. Region 0: Memory at d05a6000 (32-bit, non-prefetchable) [size=1K]
  172. Capabilities: [50] Power Management version 2
  173. Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  174. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  175. Capabilities: [58] Debug port: BAR=1 offset=00a0
  176. Capabilities: [98] PCI Advanced Features
  177. AFCap: TP+ FLR+
  178. AFCtrl: FLR-
  179. AFStatus: TP-
  180. Kernel driver in use: ehci_hcd
  181.  
  182. 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
  183. Subsystem: Super Micro Computer Inc Device d780
  184. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
  185. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  186. Latency: 0, Cache Line Size: 32 bytes
  187. Interrupt: pin A routed to IRQ 298
  188. Region 0: Memory at d05a0000 (64-bit, non-prefetchable) [size=16K]
  189. Capabilities: [50] Power Management version 2
  190. Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  191. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  192. Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  193. Address: 00000000fee0100c Data: 4139
  194. Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  195. DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  196. ExtTag- RBE- FLReset+
  197. DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  198. RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
  199. MaxPayload 128 bytes, MaxReadReq 128 bytes
  200. DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  201. LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
  202. ClockPM- Surprise- LLActRep- BwNot-
  203. LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
  204. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  205. LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  206. Capabilities: [100 v1] Virtual Channel
  207. Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  208. Arb: Fixed- WRR32- WRR64- WRR128-
  209. Ctrl: ArbSelect=Fixed
  210. Status: InProgress-
  211. VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  212. Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  213. Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
  214. Status: NegoPending- InProgress-
  215. VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
  216. Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
  217. Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
  218. Status: NegoPending- InProgress-
  219. Capabilities: [130 v1] Root Complex Link
  220. Desc: PortNumber=0f ComponentID=02 EltType=Config
  221. Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
  222. Addr: 00000000fed1c000
  223. Kernel driver in use: snd_hda_intel
  224.  
  225. 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
  226. Subsystem: Super Micro Computer Inc Device d780
  227. Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  228. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  229. Latency: 0
  230. Interrupt: pin A routed to IRQ 23
  231. Region 4: I/O ports at 18a0 [size=32]
  232. Capabilities: [50] PCI Advanced Features
  233. AFCap: TP+ FLR+
  234. AFCtrl: FLR-
  235. AFStatus: TP-
  236. Kernel driver in use: uhci_hcd
  237.  
  238. 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
  239. Subsystem: Super Micro Computer Inc Device d780
  240. Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  241. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  242. Latency: 0
  243. Interrupt: pin B routed to IRQ 22
  244. Region 4: I/O ports at 18c0 [size=32]
  245. Capabilities: [50] PCI Advanced Features
  246. AFCap: TP+ FLR+
  247. AFCtrl: FLR-
  248. AFStatus: TP-
  249. Kernel driver in use: uhci_hcd
  250.  
  251. 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
  252. Subsystem: Super Micro Computer Inc Device d780
  253. Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  254. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  255. Latency: 0
  256. Interrupt: pin C routed to IRQ 18
  257. Region 4: I/O ports at 18e0 [size=32]
  258. Capabilities: [50] PCI Advanced Features
  259. AFCap: TP+ FLR+
  260. AFCtrl: FLR-
  261. AFStatus: TP-
  262. Kernel driver in use: uhci_hcd
  263.  
  264. 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
  265. Subsystem: Super Micro Computer Inc Device d780
  266. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
  267. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  268. Latency: 0
  269. Interrupt: pin A routed to IRQ 23
  270. Region 0: Memory at d05a6400 (32-bit, non-prefetchable) [size=1K]
  271. Capabilities: [50] Power Management version 2
  272. Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  273. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  274. Capabilities: [58] Debug port: BAR=1 offset=00a0
  275. Capabilities: [98] PCI Advanced Features
  276. AFCap: TP+ FLR+
  277. AFCtrl: FLR-
  278. AFStatus: TP-
  279. Kernel driver in use: ehci_hcd
  280.  
  281. 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
  282. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
  283. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  284. Latency: 0
  285. Bus: primary=00, secondary=11, subordinate=11, sec-latency=32
  286. I/O behind bridge: 00003000-00003fff
  287. Memory behind bridge: d0200000-d02fffff
  288. Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
  289. Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  290. BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  291. PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  292. Capabilities: [50] Subsystem: Super Micro Computer Inc Device d780
  293.  
  294. 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
  295. Subsystem: Super Micro Computer Inc Device d780
  296. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  297. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  298. Latency: 0
  299. Capabilities: [e0] Vendor Specific Information: Len=0c <?>
  300.  
  301. 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02) (prog-if 8a [Master SecP PriP])
  302. Subsystem: Super Micro Computer Inc Device d780
  303. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  304. Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  305. Latency: 0
  306. Interrupt: pin B routed to IRQ 17
  307. Region 0: I/O ports at 01f0 [size=8]
  308. Region 1: I/O ports at 03f4 [size=1]
  309. Region 2: I/O ports at 0170 [size=8]
  310. Region 3: I/O ports at 0374 [size=1]
  311. Region 4: I/O ports at 1c30 [size=16]
  312. Region 5: I/O ports at 1c20 [size=16]
  313. Capabilities: [70] Power Management version 3
  314. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  315. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  316. Capabilities: [b0] PCI Advanced Features
  317. AFCap: TP+ FLR+
  318. AFCtrl: FLR-
  319. AFStatus: TP-
  320. Kernel driver in use: ata_piix
  321.  
  322. 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
  323. Subsystem: Super Micro Computer Inc Device d780
  324. Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  325. Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  326. Interrupt: pin B routed to IRQ 17
  327. Region 0: Memory at d05a6800 (64-bit, non-prefetchable) [size=256]
  328. Region 4: I/O ports at 1100 [size=32]
  329. Kernel driver in use: i801_smbus
  330.  
  331. 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02) (prog-if 85 [Master SecO PriO])
  332. Subsystem: Super Micro Computer Inc Device d780
  333. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
  334. Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  335. Latency: 0
  336. Interrupt: pin C routed to IRQ 18
  337. Region 0: I/O ports at 1c90 [size=8]
  338. Region 1: I/O ports at 1c84 [size=4]
  339. Region 2: I/O ports at 1c88 [size=8]
  340. Region 3: I/O ports at 1c80 [size=4]
  341. Region 4: I/O ports at 1c50 [size=16]
  342. Region 5: I/O ports at 1c40 [size=16]
  343. Capabilities: [70] Power Management version 3
  344. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  345. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  346. Capabilities: [b0] PCI Advanced Features
  347. AFCap: TP+ FLR+
  348. AFCtrl: FLR-
  349. AFStatus: TP-
  350. Kernel driver in use: ata_piix
  351.  
  352. 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 02)
  353. Subsystem: Super Micro Computer Inc Device 0000
  354. Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  355. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  356. Interrupt: pin A routed to IRQ 5
  357. Region 0: Memory at d05a5000 (64-bit, non-prefetchable) [size=4K]
  358. Capabilities: [50] Power Management version 3
  359. Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  360. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  361.  
  362. 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
  363. Subsystem: LSI Logic / Symbios Logic Device 1021
  364. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
  365. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  366. Latency: 0, Cache Line Size: 32 bytes
  367. Interrupt: pin A routed to IRQ 16
  368. Region 0: Memory at d0140000 (64-bit, non-prefetchable) [size=256K]
  369. Region 2: I/O ports at 2000 [size=256]
  370. Region 3: Memory at d0100000 (64-bit, non-prefetchable) [size=256K]
  371. [virtual] Expansion ROM at d0400000 [disabled] [size=128K]
  372. Capabilities: [b0] Express (v1) Endpoint, MSI 00
  373. DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
  374. ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  375. DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  376. RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  377. MaxPayload 128 bytes, MaxReadReq 2048 bytes
  378. DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
  379. LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 <2us, L1 unlimited
  380. ClockPM- Surprise- LLActRep- BwNot-
  381. LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
  382. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  383. LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  384. Capabilities: [c4] MSI: Enable- Count=1/4 Maskable- 64bit+
  385. Address: 0000000000000000 Data: 0000
  386. Capabilities: [d4] MSI-X: Enable+ Count=4 Masked-
  387. Vector table: BAR=0 offset=0003e000
  388. PBA: BAR=0 offset=0003f000
  389. Capabilities: [e0] Power Management version 2
  390. Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  391. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  392. Capabilities: [ec] Vital Product Data
  393. pcilib: sysfs_read_vpd: read failed: Connection timed out
  394. Not readable
  395. Capabilities: [100 v1] Power Budgeting <?>
  396. Kernel driver in use: megaraid_sas
  397.  
  398. 11:00.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
  399. Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
  400. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
  401. Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  402. Latency: 32
  403. Interrupt: pin A routed to IRQ 20
  404. Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
  405. Region 1: I/O ports at 3000 [size=32]
  406. Kernel driver in use: b2c2_flexcop_pci
  407.  
  408. 11:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
  409. Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
  410. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
  411. Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  412. Latency: 32
  413. Interrupt: pin A routed to IRQ 21
  414. Region 0: Memory at d0210000 (32-bit, non-prefetchable) [size=64K]
  415. Region 1: I/O ports at 3020 [size=32]
  416. Kernel driver in use: b2c2_flexcop_pci
  417.  
  418. 11:02.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
  419. Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
  420. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
  421. Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  422. Latency: 32
  423. Interrupt: pin A routed to IRQ 22
  424. Region 0: Memory at d0220000 (32-bit, non-prefetchable) [size=64K]
  425. Region 1: I/O ports at 3040 [size=32]
  426. Kernel driver in use: b2c2_flexcop_pci
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement