API tools faq
paste
Advertisement
Guest User

dmesg

a guest
Apr 15th, 2014
95
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.41 KB | None | 0 0
raw download clone embed print report
  1. root@Hola-PC Ubuntu:~# dmesg
  2. Linux version 3.1.2 (sasa@sasa-laptop) (gcc version 4.7.1 20120402 (prerelease) (crosstool-NG linaro-1.13.1-2012.04-20120426 - Linaro GCC 2012.04) ) #2 SMP PREEMPT Tue Apr 15 14:01:11 MSK 2014
  3. CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  4. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. Machine: Starterkit i.MX 6Solo Board
  6. Memory policy: ECC disabled, Data cache writealloc
  7. CPU identified as i.MX6DL/SOLO, silicon rev 1.1
  8. On node 0 totalpages: 98304
  9. free_area_init_node: node 0, pgdat 80712200, node_mem_map 8b800000
  10. DMA zone: 368 pages used for memmap
  11. DMA zone: 0 pages reserved
  12. DMA zone: 46736 pages, LIFO batch:15
  13. Normal zone: 656 pages used for memmap
  14. Normal zone: 50544 pages, LIFO batch:15
  15. PERCPU: Embedded 7 pages/cpu @8bc06000 s6208 r8192 d14272 u32768
  16. pcpu-alloc: s6208 r8192 d14272 u32768 alloc=8*4096
  17. pcpu-alloc: [0] 0
  18. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280
  19. Kernel command line: video=mxcfb0:dev=hdmi,1280x1024M@60,if=RGB24 console=ttymxc0,115200 consoleblank=0 dmfc=3 root=/dev/mmcblk0p1 rootwait
  20. PID hash table entries: 2048 (order: 1, 8192 bytes)
  21. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  23. Memory: 384MB = 384MB total
  24. Memory: 380992k/380992k available, 143296k reserved, 0K highmem
  25. Virtual kernel memory layout:
  26. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  28. DMA : 0xf4600000 - 0xffe00000 ( 184 MB)
  29. vmalloc : 0xa0800000 - 0xf2000000 (1304 MB)
  30. lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
  31. pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  32. modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  33. .init : 0x80008000 - 0x8003d000 ( 212 kB)
  34. .text : 0x8003d000 - 0x806afd54 (6604 kB)
  35. .data : 0x806b0000 - 0x807144f0 ( 402 kB)
  36. .bss : 0x80714514 - 0x8077e7bc ( 425 kB)
  37. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  38. Preemptible hierarchical RCU implementation.
  39. NR_IRQS:624
  40. MXC GPIO hardware
  41. sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
  42. Set periph_clk's parent to pll2_pfd_400M!
  43. arm_max_freq=1GHz
  44. MXC_Early serial console at MMIO 0x2020000 (options '115200')
  45. bootconsole [ttymxc0] enabled
  46. Console: colour dummy device 80x30
  47. Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  48. pid_max: default: 32768 minimum: 301
  49. Mount-cache hash table entries: 512
  50. CPU: Testing write buffer coherency: ok
  51. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  52. Brought up 1 CPUs
  53. SMP: Total of 1 processors activated (1581.05 BogoMIPS).
  54. devtmpfs: initialized
  55. print_constraints: dummy:
  56. NET: Registered protocol family 16
  57. print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal
  58. print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
  59. print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
  60. print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
  61. print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
  62. print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
  63. hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  64. hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  65. hw-breakpoint: maximum watchpoint size is 4 bytes.
  66. L310 cache controller enabled
  67. l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B
  68. bio: create slab <bio-0> at 0
  69. mxs-dma mxs-dma-apbh: initialized
  70. print_constraints: vmmc: 3300 mV
  71. SCSI subsystem initialized
  72. libata version 3.00 loaded.
  73. spi_imx imx6q-ecspi.3: probed
  74. spi_imx imx6q-ecspi.0: probed
  75. usbcore: registered new interface driver usbfs
  76. usbcore: registered new interface driver hub
  77. usbcore: registered new device driver usb
  78. Freescale USB OTG Driver loaded, $Revision: 1.55 $
  79. imx-ipuv3 imx-ipuv3.0: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
  80. Advanced Linux Sound Architecture Driver Version 1.0.24.
  81. Bluetooth: Core ver 2.16
  82. NET: Registered protocol family 31
  83. Bluetooth: HCI device and connection manager initialized
  84. Bluetooth: HCI socket layer initialized
  85. Bluetooth: L2CAP socket layer initialized
  86. Bluetooth: SCO socket layer initialized
  87. i2c-core: driver [max17135] using legacy suspend method
  88. i2c-core: driver [max17135] using legacy resume method
  89. Switching to clocksource mxc_timer1
  90. cfg80211: Calling CRDA to update world regulatory domain
  91. NET: Registered protocol family 2
  92. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  93. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  94. TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  95. TCP: Hash tables configured (established 16384 bind 16384)
  96. TCP reno registered
  97. UDP hash table entries: 256 (order: 1, 8192 bytes)
  98. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  99. NET: Registered protocol family 1
  100. RPC: Registered named UNIX socket transport module.
  101. RPC: Registered udp transport module.
  102. RPC: Registered tcp transport module.
  103. RPC: Registered tcp NFSv4.1 backchannel transport module.
  104. _regulator_get: etb supply vcore not found, using dummy regulator
  105. _regulator_get: etm.0 supply vcore not found, using dummy regulator
  106. Static Power Management for Freescale i.MX6
  107. wait mode is enabled for i.MX6
  108. cpaddr = a0820000 suspend_iram_base=a088c000
  109. PM driver module loaded
  110. IMX usb wakeup probe
  111. the wakeup pdata is 0x94150900
  112. add wake up source irq 75
  113. IMX usb wakeup probe
  114. the wakeup pdata is 0x94150bc0
  115. cpu regulator mode:ldo_enable
  116. i.MXC CPU frequency driver
  117. fuse init (API version 7.16)
  118. msgmni has been set to 744
  119. alg: No test for stdrng (krng)
  120. io scheduler noop registered
  121. io scheduler deadline registered
  122. io scheduler cfq registered (default)
  123. mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
  124. mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
  125. fbcvt: 1280x1024@60: CVT Name - 1.310M4
  126. imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  127. imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  128. Console: switching to colour frame buffer device 160x64
  129. imx-sdma imx-sdma: loaded firmware 1.1
  130. imx-sdma imx-sdma: initialized
  131. Serial: IMX driver
  132. imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  133. console [ttymxc0] enabled, bootconsole disabled
  134. imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
  135. imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  136. loop: module loaded
  137. vcan: Virtual CAN interface driver
  138. CAN device driver interface
  139. flexcan netdevice driver
  140. flexcan imx6q-flexcan.1: device registered (reg_base=a08f8000, irq=143)
  141. FEC Ethernet Driver
  142. fec_enet_mii_bus: probed
  143. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  144. fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  145. fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  146. fbcvt: 1280x1024@60: CVT Name - 1.310M4
  147. fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  148. fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  149. hub 1-0:1.0: USB hub found
  150. hub 1-0:1.0: 1 port detected
  151. add wake up source irq 72
  152. fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  153. fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  154. fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  155. fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  156. hub 2-0:1.0: USB hub found
  157. hub 2-0:1.0: 1 port detected
  158. Initializing USB Mass Storage driver...
  159. usbcore: registered new interface driver usb-storage
  160. USB Mass Storage support registered.
  161. ARC USBOTG Device Controller driver (1 August 2005)
  162. mousedev: PS/2 mouse device common for all mice
  163. _regulator_get: spi3.0 supply vcc not found, using dummy regulator
  164. ads7846 spi3.0: touchscreen, irq 362
  165. input: ADS7846 Touchscreen as /devices/platform/imx6q-ecspi.3/spi_master/spi3/spi3.0/input/input0
  166. _regulator_get: spi0.0 supply vcc not found, using dummy regulator
  167. ads7846 spi0.0: touchscreen, irq 347
  168. input: ADS7846 Touchscreen as /devices/platform/imx6q-ecspi.0/spi_master/spi0/spi0.0/input/input1
  169. i2c-core: driver [isl29023] using legacy suspend method
  170. i2c-core: driver [isl29023] using legacy resume method
  171. snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
  172. i2c /dev entries driver
  173. Linux video capture interface: v2.00
  174. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  175. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  176. imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
  177. Bluetooth: Generic Bluetooth USB driver ver 0.6
  178. usbcore: registered new interface driver btusb
  179. sdhci: Secure Digital Host Controller Interface driver
  180. sdhci: Copyright(c) Pierre Ossman
  181. mmc0: SDHCI controller on platform [sdhci-esdhc-imx.0] using ADMA
  182. mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA
  183. mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  184. VPU initialized
  185. mxc_asrc registered
  186. Galcore version 4.6.9.6622
  187. Thermal calibration data is 0x5785025f
  188. Thermal sensor with ratio = 181
  189. imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  190. Anatop Thermal registered as thermal_zone0
  191. anatop_thermal_probe: default cooling device is cpufreq!
  192. HDMI CEC initialized
  193. usbcore: registered new interface driver usbhid
  194. usbhid: USB HID core driver
  195. usbcore: registered new interface driver snd-usb-audio
  196. mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
  197. asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
  198. ALSA device list:
  199. #0: imx-hdmi-soc
  200. NET: Registered protocol family 26
  201. TCP cubic registered
  202. NET: Registered protocol family 17
  203. can: controller area network core (rev 20090105 abi 8)
  204. NET: Registered protocol family 29
  205. can: raw protocol (rev 20090105)
  206. can: broadcast manager protocol (rev 20090105 t)
  207. Bluetooth: RFCOMM TTY layer initialized
  208. Bluetooth: RFCOMM socket layer initialized
  209. Bluetooth: RFCOMM ver 1.11
  210. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  211. Bluetooth: BNEP filters: protocol multicast
  212. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  213. lib80211: common routines for IEEE802.11 drivers
  214. lib80211_crypt: registered algorithm 'NULL'
  215. lib80211_crypt: registered algorithm 'WEP'
  216. lib80211_crypt: registered algorithm 'CCMP'
  217. lib80211_crypt: registered algorithm 'TKIP'
  218. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  219. Bus freq driver module loaded
  220. Bus freq driver Enabled
  221. mxc_dvfs_core_probe
  222. DVFS driver module loaded
  223. snvs_rtc snvs_rtc.0: setting system clock to 2014-04-15 13:29:53 UTC (1397568593)
  224. mmc0: new high speed SDHC card at address 59b4
  225. mmcblk0: mmc0:59b4 USD 14.7 GiB
  226. mmcblk0: p1
  227. EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
  228. EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  229. VFS: Mounted root (ext3 filesystem) on device 179:1.
  230. devtmpfs: mounted
  231. Freeing init memory: 212K
  232. usb 2-1: new high speed USB device number 2 using fsl-ehci
  233. hub 2-1:1.0: USB hub found
  234. hub 2-1:1.0: 4 ports detected
  235. USB Host suspend begins
  236. will suspend roothub and its children
  237. ehci_fsl_bus_suspend begins, DR
  238. ehci_fsl_bus_suspend ends, DR
  239. host suspend ends
  240. init: hostname main process (59) terminated with status 1
  241. usb 2-1.1: new low speed USB device number 3 using fsl-ehci
  242. init: ureadahead main process (62) terminated with status 5
  243. input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
  244. generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-fsl-ehci.1-1.1/input0
  245. input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
  246. generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-fsl-ehci.1-1.1/input1
  247. usb 2-1.4: new low speed USB device number 4 using fsl-ehci
  248. input: Genius Optical Mouse as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
  249. generic-usb 0003:0458:003A.0003: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-fsl-ehci.1-1.4/input0
  250. init: mounted-proc main process (72) terminated with status 1
  251. udevd[125]: starting version 173
  252. adv7180_tvin: disagrees about version of symbol module_layout
  253. ehci_fsl_bus_resume begins, DR
  254. init: plymouth main process (63) killed by SEGV signal
  255. init: plymouth-splash main process (309) terminated with status 2
  256. init: failsafe main process (410) killed by TERM signal
  257. wd_keepalive (487): /proc/487/oom_adj is deprecated, please use /proc/487/oom_score_adj instead.
  258. init: apport pre-start process (468) terminated with status 1
  259. init: apport post-stop process (502) terminated with status 1
  260. eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
  261. imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  262. imx2-wdt imx2-wdt.0: Unexpected close: Expect reboot!
  263. PHY: 1:00 - Link is Up - 100/Full
  264. imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  265. imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  266. imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  267. warning: process `colord' used the deprecated sysctl system call with 8.1.2.
  268. g_serial: disagrees about version of symbol module_layout
  269. EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=0
  270. init: tty1 main process (994) killed by TERM signal
  271. init: ttyGS0 main process (478) terminated with status 1
  272. init: ttyGS0 main process ended, respawning
  273. init: ttyGS0 main process (1088) terminated with status 1
  274. init: ttyGS0 main process ended, respawning
  275. init: ttyGS0 main process (1214) terminated with status 1
  276. init: ttyGS0 main process ended, respawning
  277. init: ttyGS0 main process (1226) terminated with status 1
  278. init: ttyGS0 main process ended, respawning
  279. init: ttyGS0 main process (1238) terminated with status 1
  280. init: ttyGS0 main process ended, respawning
  281. init: ttyGS0 main process (1250) terminated with status 1
  282. init: ttyGS0 main process ended, respawning
  283. init: ttyGS0 main process (1326) terminated with status 1
  284. init: ttyGS0 main process ended, respawning
  285. init: ttyGS0 main process (1440) terminated with status 1
  286. init: ttyGS0 main process ended, respawning
  287. init: ttyGS0 main process (1502) terminated with status 1
  288. init: ttyGS0 main process ended, respawning
  289. init: ttyGS0 main process (1530) terminated with status 1
  290. init: ttyGS0 main process ended, respawning
  291. init: ttyGS0 main process (1553) terminated with status 1
  292. init: ttyGS0 main process ended, respawning
  293. init: ttyGS0 main process (1644) terminated with status 1
  294. init: ttyGS0 main process ended, respawning
  295. init: ttyGS0 main process (1657) terminated with status 1
  296. init: ttyGS0 main process ended, respawning
  297. init: ttyGS0 main process (1672) terminated with status 1
  298. init: ttyGS0 main process ended, respawning
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!