[   39.021773] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   39.021806] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   39.023989] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   39.023993] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[   39.024010] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP05.PEGP.DD02._BCL] (Node ffff904766915848), AE_NOT_FOUND (20160831/psparse-543)
[   39.024061] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/LNXVIDEO:01/input/input11
[   39.024094] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   39.026141] fbcon: inteldrmfb (fb0) is primary device
[   39.090872] EFI Variables Facility v0.08 2004-May-17
[   39.105813] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   39.147891] input: PNP0C50:00 06CB:76E9 Touchpad as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-PNP0C50:00/0018:06CB:76E9.0001/input/input12
[   39.148031] hid-multitouch 0018:06CB:76E9.0001: input,hidraw4: I2C HID v1.00 Mouse [PNP0C50:00 06CB:76E9] on i2c-PNP0C50:00
[   39.162603] pstore: using zlib compression
[   39.162616] pstore: Registered efi as persistent store backend
[   39.192019] usb 2-8: new full-speed USB device number 6 using xhci_hcd
[   39.264265] input: PC Speaker as /devices/platform/pcspkr/input/input14
[   39.332687] usb 2-8: New USB device found, idVendor=0cf3, idProduct=3004
[   39.332689] usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   39.374268] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   39.374269] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   39.374270] RAPL PMU: hw unit of domain package 2^-14 Joules
[   39.374271] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   39.374272] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   39.733619] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[   39.733762] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   39.753989] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   39.754782] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   39.770289] media: Linux media interface: v0.10
[   40.047083] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   40.047085] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   40.047086] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   40.047087] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   40.047088] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   40.047089] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1b
[   40.047090] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   40.054289] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   40.054840] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   40.054890] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[   40.065982] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:01:00.0.bin (-2)
[   40.065984] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[   40.065996] ath10k_pci 0000:01:00.0: firmware: failed to load ath10k/cal-pci-0000:01:00.0.bin (-2)
[   40.065997] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[   40.106446] Linux video capture interface: v2.00
[   40.121594] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   40.121598] Console: switching to colour frame buffer device 170x48
[   40.139029] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   40.179274] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   40.213234] usb 2-1: 2:1: cannot get freq at ep 0x1
[   40.214094] iTCO_vendor_support: vendor-support=0
[   40.222661] usbcore: registered new interface driver snd-usb-audio
[   40.245310] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[   40.245370] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[   40.245422] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[   40.373260] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw2.1/firmware-5.bin
[   40.373269] ath10k_pci 0000:01:00.0: qca6174 hw2.1 target 0x05010000 chip_id 0x003405ff sub 1a56:1525
[   40.373271] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   40.373831] ath10k_pci 0000:01:00.0: firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 features ignore-otp,no-4addr-pad crc32 10bf8e08
[   40.471095] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   40.471148] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[   40.471258] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   40.473244] dell_wmi: Detected Dell WMI interface version 0
[   40.473291] input: Dell WMI hotkeys as /devices/virtual/input/input21
[   40.828596] intel_rapl: Found RAPL domain package
[   40.828602] intel_rapl: Found RAPL domain core
[   40.828607] intel_rapl: Found RAPL domain uncore
[   40.828611] intel_rapl: Found RAPL domain dram
[   40.828619] intel_rapl: RAPL package 0 domain package locked by BIOS
[   40.828657] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   40.915788] uvcvideo: Found UVC 1.00 device Integrated_Webcam_FHD (0c45:6708)
[   40.956915] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[   40.956919] uvcvideo 2-6:1.0: Entity type for entity Extension 3 was not initialized!
[   40.956921] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[   40.956923] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[   40.957035] input: Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input22
[   40.957122] usbcore: registered new interface driver uvcvideo
[   40.957123] USB Video Class driver (1.1.1)
[   41.162412] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw2.1/board-2.bin
[   41.162717] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 ae2e275a
[   42.197594] Bluetooth: Core ver 2.22
[   42.197609] NET: Registered protocol family 31
[   42.197609] Bluetooth: HCI device and connection manager initialized
[   42.197612] Bluetooth: HCI socket layer initialized
[   42.197614] Bluetooth: L2CAP socket layer initialized
[   42.197620] Bluetooth: SCO socket layer initialized
[   42.258349] usbcore: registered new interface driver btusb
[   42.359672] ath10k_pci 0000:01:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   42.453671] ath: EEPROM regdomain: 0x6c
[   42.453672] ath: EEPROM indicates we should expect a direct regpair map
[   42.453674] ath: Country alpha2 being used: 00
[   42.453674] ath: Regpair used: 0x6c
[   42.466039] usb 2-8: firmware: failed to load ar3k/AthrBT_0x00000200.dfu (-2)
[   42.466082] usb 2-8: Direct firmware load for ar3k/AthrBT_0x00000200.dfu failed with error -2
[   42.466085] Bluetooth: Loading patch file failed
[   42.466122] ath3k: probe of 2-8:1.0 failed with error -2
[   42.466156] usbcore: registered new interface driver ath3k
[   42.720183] Adding 8306684k swap on /dev/mapper/AgentSkitNsa--vg-swap_1.  Priority:-1 extents:1 across:8306684k FS
[   43.859913] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[   43.909300] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[   46.920596] snd_hda_intel 0000:00:1b.0: control 2:0:0:PCM Playback Volume:0 is already present
[   51.407303] Netfilter messages via NETLINK v0.30.
[   55.026635] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   55.027170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   55.028081] alx 0000:02:00.0 eth0: NIC Up: 1 Gbps Full
[   55.028623] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   55.031761] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.547112] usb 2-1: 2:1: cannot get freq at ep 0x1
[   66.547580] usb 2-1: 2:1: cannot get freq at ep 0x1
[   66.553081] usb 2-1: 1:1: cannot set freq 44100 to ep 0x81
[   66.555001] usb 2-1: 1:1: cannot set freq 44100 to ep 0x81
[   66.591941] usb 2-1: 2:1: cannot set freq 44100 to ep 0x1
[   66.599357] usb 2-1: 2:1: cannot set freq 44100 to ep 0x1
[  296.198480] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.216438] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.231021] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.243178] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.255185] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.263136] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.272049] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.283143] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.291148] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.299019] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.306972] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.315142] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.323153] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.331163] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.339173] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.347139] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.355148] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.362996] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.371140] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.379158] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.387096] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.395159] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.402993] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.411159] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.419160] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.427178] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.435143] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.443131] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.451054] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.459150] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.467233] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.475016] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.483191] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.491133] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.499143] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.507142] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.515116] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.523013] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.531143] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.539057] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.547159] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.555159] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.563162] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.571036] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.579171] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.587162] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.595160] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.604260] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.615179] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.623163] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.631160] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.639182] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.647236] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.655183] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1
[  296.663242] usb 2-1: 2:1: cannot set freq 48000 to ep 0x1