API tools faq
paste
Advertisement
Guest User

uevm after

a guest
Jul 17th, 2013
223
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.41 KB | None | 0 0
raw download clone embed print report
  1. Terminal ready
  2.  
  3. U-Boot SPL 2013.07-rc2-00038-g225fd8c (Jul 11 2013 - 09:30:53)
  4. OMAP5432 ES2.0
  5. OMAP SD/MMC: 0
  6. reading u-boot.img
  7. reading u-boot.img
  8.  
  9.  
  10. U-Boot 2013.07-rc2-00038-g225fd8c (Jul 11 2013 - 09:30:53)
  11.  
  12. CPU : OMAP5432 ES2.0
  13. Board: OMAP5430 EVM
  14. I2C: ready
  15. DRAM: 2 GiB
  16. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  17. Using default environment
  18.  
  19. In: serial
  20. Out: serial
  21. Err: serial
  22. Hit any key to stop autoboot: 0
  23. mmc0 is current device
  24. reading boot.scr
  25. ** Unable to read file boot.scr **
  26. reading uEnv.txt
  27. 49 bytes read in 5 ms (8.8 KiB/s)
  28. Importing environment from mmc0 ...
  29. reading //zImage
  30. 4088040 bytes read in 223 ms (17.5 MiB/s)
  31. reading //omap5-uevm.dtb
  32. 17761 bytes read in 22 ms (788.1 KiB/s)
  33. Booting from mmc0 ...
  34. Kernel image @ 0x82000000 [ 0x000000 - 0x3e60e8 ]
  35. ## Flattened Device Tree blob at 80f80000
  36. Booting using the fdt blob at 0x80f80000
  37. Using Device Tree in place at 80f80000, end 80f87560
  38.  
  39. Starting kernel ...
  40.  
  41. [ 0.000000] Booting Linux on physical CPU 0x0
  42. [ 0.000000] Linux version 3.11.0-rc1-00014-g88f50b2 (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #7 SMP Wed Jul 17 11:33:26 CDT 2013
  43. [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c53c7d
  44. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  45. [ 0.000000] Machine: Generic OMAP5 (Flattened Device Tree), model: TI OMAP5 uEVM board
  46. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000
  47. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  48. [ 0.000000] OMAP5432 ES2.0
  49. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1f8e000 s14208 r8192 d14464 u36864
  50. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518416
  51. [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait
  52. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  53. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  54. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  55. [ 0.000000] Memory: 2032180K/2079744K available (5304K kernel code, 637K rwdata, 1956K rodata, 377K init, 5522K bss, 47564K reserved, 1301504K highmem)
  56. [ 0.000000] Virtual kernel memory layout:
  57. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  58. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  59. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  60. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  61. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  62. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  63. [ 0.000000] .text : 0xc0008000 - 0xc071f5f0 (7262 kB)
  64. [ 0.000000] .init : 0xc0720000 - 0xc077e780 ( 378 kB)
  65. [ 0.000000] .data : 0xc0780000 - 0xc081f640 ( 638 kB)
  66. [ 0.000000] .bss : 0xc081f640 - 0xc0d840b0 (5523 kB)
  67. [ 0.000000] Hierarchical RCU implementation.
  68. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  69. [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
  70. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  71. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  72. [ 0.000000] Architected local timer running at 6.14MHz (virt).
  73. [ 0.000000] Switching to timer-based delay loop
  74. [ 0.000000] sched_clock: ARM arch timer >56 bits at 6144kHz, resolution 162ns
  75. [ 0.000000] Console: colour dummy device 80x30
  76. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  77. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  78. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  79. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  80. [ 0.000000] ... CLASSHASH_SIZE: 4096
  81. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  82. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  83. [ 0.000000] ... CHAINHASH_SIZE: 16384
  84. [ 0.000000] memory used by lock dependency info: 3695 kB
  85. [ 0.000000] per task-struct memory footprint: 1152 bytes
  86. [ 8.471157] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440)
  87. [ 8.471168] pid_max: default: 32768 minimum: 301
  88. [ 8.471438] Security Framework initialized
  89. [ 8.471522] Mount-cache hash table entries: 512
  90. [ 8.481038] CPU: Testing write buffer coherency: ok
  91. [ 8.481702] /cpus/cpu@0 missing clock-frequency property
  92. [ 8.481712] /cpus/cpu@1 missing clock-frequency property
  93. [ 8.481729] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  94. [ 8.481750] Setting up static identity map for 0xc0507698 - 0xc0507708
  95. [ 8.484570] CPU1: Booted secondary processor
  96. [ 8.484596] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  97. [ 8.484954] Brought up 2 CPUs
  98. [ 8.484967] SMP: Total of 2 processors activated (24.57 BogoMIPS).
  99. [ 8.484972] CPU: All CPU(s) started in SVC mode.
  100. [ 8.486512] devtmpfs: initialized
  101. [ 9.703114] clock: dpll_abe_ck failed transition to 'locked'
  102. [ 10.904012] clock: dpll_abe_ck failed transition to 'locked'
  103. [ 12.104884] clock: dpll_abe_ck failed transition to 'locked'
  104. [ 13.305926] clock: dpll_abe_ck failed transition to 'locked'
  105. [ 13.305960] ------------[ cut here ]------------
  106. [ 13.305975] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:780 clk_disable+0x18/0x24()
  107. [ 13.305980] Modules linked in:
  108. [ 13.305993] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc1-00014-g88f50b2 #7
  109. [ 13.306014] [<c001b434>] (unwind_backtrace+0x0/0xf0) from [<c001764c>] (show_stack+0x10/0x14)
  110. [ 13.306028] [<c001764c>] (show_stack+0x10/0x14) from [<c04fc878>] (dump_stack+0x70/0x8c)
  111. [ 13.306041] [<c04fc878>] (dump_stack+0x70/0x8c) from [<c0043f04>] (warn_slowpath_common+0x6c/0x8c)
  112. [ 13.306051] [<c0043f04>] (warn_slowpath_common+0x6c/0x8c) from [<c0043f40>] (warn_slowpath_null+0x1c/0x24)
  113. [ 13.306061] [<c0043f40>] (warn_slowpath_null+0x1c/0x24) from [<c042a810>] (clk_disable+0x18/0x24)
  114. [ 13.306073] [<c042a810>] (clk_disable+0x18/0x24) from [<c002b65c>] (_disable_clocks+0x18/0x68)
  115. [ 13.306085] [<c002b65c>] (_disable_clocks+0x18/0x68) from [<c002ca48>] (_idle+0x114/0x1f4)
  116. [ 13.306098] [<c002ca48>] (_idle+0x114/0x1f4) from [<c072c8c0>] (_setup+0x108/0x15c)
  117. [ 13.306108] [<c072c8c0>] (_setup+0x108/0x15c) from [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c)
  118. [ 13.306120] [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c) from [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40)
  119. [ 13.306130] [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40) from [<c00087b0>] (do_one_initcall+0x34/0x160)
  120. [ 13.306143] [<c00087b0>] (do_one_initcall+0x34/0x160) from [<c072091c>] (kernel_init_freeable+0xfc/0x1c8)
  121. [ 13.306155] [<c072091c>] (kernel_init_freeable+0xfc/0x1c8) from [<c04f7dc8>] (kernel_init+0x8/0xe4)
  122. [ 13.306168] [<c04f7dc8>] (kernel_init+0x8/0xe4) from [<c00138e8>] (ret_from_fork+0x14/0x2c)
  123. [ 13.306271] ---[ end trace 1b75b31a2719ed1c ]---
  124. [ 14.554488] clock: dpll_abe_ck failed transition to 'locked'
  125. [ 15.755309] clock: dpll_abe_ck failed transition to 'locked'
  126. [ 15.755337] ------------[ cut here ]------------
  127. [ 15.755347] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:780 clk_disable+0x18/0x24()
  128. [ 15.755352] Modules linked in:
  129. [ 15.755363] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.11.0-rc1-00014-g88f50b2 #7
  130. [ 15.755376] [<c001b434>] (unwind_backtrace+0x0/0xf0) from [<c001764c>] (show_stack+0x10/0x14)
  131. [ 15.755387] [<c001764c>] (show_stack+0x10/0x14) from [<c04fc878>] (dump_stack+0x70/0x8c)
  132. [ 15.755397] [<c04fc878>] (dump_stack+0x70/0x8c) from [<c0043f04>] (warn_slowpath_common+0x6c/0x8c)
  133. [ 15.755407] [<c0043f04>] (warn_slowpath_common+0x6c/0x8c) from [<c0043f40>] (warn_slowpath_null+0x1c/0x24)
  134. [ 15.755416] [<c0043f40>] (warn_slowpath_null+0x1c/0x24) from [<c042a810>] (clk_disable+0x18/0x24)
  135. [ 15.755426] [<c042a810>] (clk_disable+0x18/0x24) from [<c002b65c>] (_disable_clocks+0x18/0x68)
  136. [ 15.755437] [<c002b65c>] (_disable_clocks+0x18/0x68) from [<c002ca48>] (_idle+0x114/0x1f4)
  137. [ 15.755447] [<c002ca48>] (_idle+0x114/0x1f4) from [<c072c8c0>] (_setup+0x108/0x15c)
  138. [ 15.755458] [<c072c8c0>] (_setup+0x108/0x15c) from [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c)
  139. [ 15.755469] [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c) from [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40)
  140. [ 15.755479] [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40) from [<c00087b0>] (do_one_initcall+0x34/0x160)
  141. [ 15.755489] [<c00087b0>] (do_one_initcall+0x34/0x160) from [<c072091c>] (kernel_init_freeable+0xfc/0x1c8)
  142. [ 15.755501] [<c072091c>] (kernel_init_freeable+0xfc/0x1c8) from [<c04f7dc8>] (kernel_init+0x8/0xe4)
  143. [ 15.755513] [<c04f7dc8>] (kernel_init+0x8/0xe4) from [<c00138e8>] (ret_from_fork+0x14/0x2c)
  144. [ 15.755519] ---[ end trace 1b75b31a2719ed1d ]---
  145. [ 16.956337] clock: dpll_abe_ck failed transition to 'locked'
  146. [ 18.157238] clock: dpll_abe_ck failed transition to 'locked'
  147. [ 18.157267] ------------[ cut here ]------------
  148. [ 18.157276] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:780 clk_disable+0x18/0x24()
  149. [ 18.157282] Modules linked in:
  150. [ 18.157292] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.11.0-rc1-00014-g88f50b2 #7
  151. [ 18.157305] [<c001b434>] (unwind_backtrace+0x0/0xf0) from [<c001764c>] (show_stack+0x10/0x14)
  152. [ 18.157315] [<c001764c>] (show_stack+0x10/0x14) from [<c04fc878>] (dump_stack+0x70/0x8c)
  153. [ 18.157325] [<c04fc878>] (dump_stack+0x70/0x8c) from [<c0043f04>] (warn_slowpath_common+0x6c/0x8c)
  154. [ 18.157335] [<c0043f04>] (warn_slowpath_common+0x6c/0x8c) from [<c0043f40>] (warn_slowpath_null+0x1c/0x24)
  155. [ 18.157344] [<c0043f40>] (warn_slowpath_null+0x1c/0x24) from [<c042a810>] (clk_disable+0x18/0x24)
  156. [ 18.157354] [<c042a810>] (clk_disable+0x18/0x24) from [<c002b65c>] (_disable_clocks+0x18/0x68)
  157. [ 18.157364] [<c002b65c>] (_disable_clocks+0x18/0x68) from [<c002ca48>] (_idle+0x114/0x1f4)
  158. [ 18.157374] [<c002ca48>] (_idle+0x114/0x1f4) from [<c072c8c0>] (_setup+0x108/0x15c)
  159. [ 18.157384] [<c072c8c0>] (_setup+0x108/0x15c) from [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c)
  160. [ 18.157395] [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c) from [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40)
  161. [ 18.157405] [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40) from [<c00087b0>] (do_one_initcall+0x34/0x160)
  162. [ 18.157417] [<c00087b0>] (do_one_initcall+0x34/0x160) from [<c072091c>] (kernel_init_freeable+0xfc/0x1c8)
  163. [ 18.157428] [<c072091c>] (kernel_init_freeable+0xfc/0x1c8) from [<c04f7dc8>] (kernel_init+0x8/0xe4)
  164. [ 18.157440] [<c04f7dc8>] (kernel_init+0x8/0xe4) from [<c00138e8>] (ret_from_fork+0x14/0x2c)
  165. [ 18.157446] ---[ end trace 1b75b31a2719ed1e ]---
  166. [ 19.358399] clock: dpll_abe_ck failed transition to 'locked'
  167. [ 20.559452] clock: dpll_abe_ck failed transition to 'locked'
  168. [ 20.559479] ------------[ cut here ]------------
  169. [ 20.559489] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:780 clk_disable+0x18/0x24()
  170. [ 20.559494] Modules linked in:
  171. [ 20.559503] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.11.0-rc1-00014-g88f50b2 #7
  172. [ 20.559516] [<c001b434>] (unwind_backtrace+0x0/0xf0) from [<c001764c>] (show_stack+0x10/0x14)
  173. [ 20.559526] [<c001764c>] (show_stack+0x10/0x14) from [<c04fc878>] (dump_stack+0x70/0x8c)
  174. [ 20.559536] [<c04fc878>] (dump_stack+0x70/0x8c) from [<c0043f04>] (warn_slowpath_common+0x6c/0x8c)
  175. [ 20.559546] [<c0043f04>] (warn_slowpath_common+0x6c/0x8c) from [<c0043f40>] (warn_slowpath_null+0x1c/0x24)
  176. [ 20.559555] [<c0043f40>] (warn_slowpath_null+0x1c/0x24) from [<c042a810>] (clk_disable+0x18/0x24)
  177. [ 20.559565] [<c042a810>] (clk_disable+0x18/0x24) from [<c002b65c>] (_disable_clocks+0x18/0x68)
  178. [ 20.559575] [<c002b65c>] (_disable_clocks+0x18/0x68) from [<c002ca48>] (_idle+0x114/0x1f4)
  179. [ 20.559585] [<c002ca48>] (_idle+0x114/0x1f4) from [<c072c8c0>] (_setup+0x108/0x15c)
  180. [ 20.559596] [<c072c8c0>] (_setup+0x108/0x15c) from [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c)
  181. [ 20.559606] [<c002ce30>] (omap_hwmod_for_each+0x34/0x5c) from [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40)
  182. [ 20.559617] [<c072cc58>] (__omap_hwmod_setup_all+0x30/0x40) from [<c00087b0>] (do_one_initcall+0x34/0x160)
  183. [ 20.559627] [<c00087b0>] (do_one_initcall+0x34/0x160) from [<c072091c>] (kernel_init_freeable+0xfc/0x1c8)
  184. [ 20.559638] [<c072091c>] (kernel_init_freeable+0xfc/0x1c8) from [<c04f7dc8>] (kernel_init+0x8/0xe4)
  185. [ 20.559650] [<c04f7dc8>] (kernel_init+0x8/0xe4) from [<c00138e8>] (ret_from_fork+0x14/0x2c)
  186. [ 20.559656] ---[ end trace 1b75b31a2719ed1f ]---
  187. [ 21.760486] clock: dpll_abe_ck failed transition to 'locked'
  188. [ 22.961470] clock: dpll_abe_ck failed transition to 'locked'
  189. [ 24.162109] clock: dpll_abe_ck failed transition to 'locked'
  190. [ 25.362960] clock: dpll_abe_ck failed transition to 'locked'
  191. [ 26.563657] clock: dpll_abe_ck failed transition to 'locked'
  192. [ 26.566269] pinctrl core: initialized pinctrl subsystem
  193. [ 26.568258] regulator-dummy: no parameters
  194. [ 26.569596] NET: Registered protocol family 16
  195. [ 26.573709] DMA: preallocated 256 KiB pool for atomic coherent allocations
  196. [ 26.591525] OMAP GPIO hardware version 0.1
  197. [ 26.602015] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc'
  198. [ 26.602279] omap-gpmc 50000000.gpmc: error: clk_get
  199. [ 26.602309] omap-gpmc: probe of 50000000.gpmc failed with error -2
  200. [ 26.616931] platform ocp2scp.3: Cannot lookup hwmod 'ocp2scp1'
  201. [ 26.617308] platform 4a062000.usbhstll: Cannot lookup hwmod 'usb_tll_hs'
  202. [ 26.617623] platform 4a064000.usbhshost: Cannot lookup hwmod 'usb_host_hs'
  203. [ 26.619816] No ATAGs?
  204. [ 26.619839] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  205. [ 26.619847] hw-breakpoint: maximum watchpoint size is 8 bytes.
  206. [ 26.621963] OMAP DMA hardware revision 0.0
  207. [ 26.648258] bio: create slab <bio-0> at 0
  208. [ 26.650210] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
  209. [ 26.650232] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
  210. [ 26.682105] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
  211. [ 26.683196] vmmcsd_fixed: 3000 mV
  212. [ 26.683820] hsusb2_reset: 3300 mV
  213. [ 26.684300] hsusb3_reset: 3300 mV
  214. [ 26.688313] SCSI subsystem initialized
  215. [ 26.689269] usbcore: registered new interface driver usbfs
  216. [ 26.689471] usbcore: registered new interface driver hub
  217. [ 26.689737] usbcore: registered new device driver usb
  218. [ 26.691420] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c1_pins, deferring probe
  219. [ 26.691439] platform 48070000.i2c: Driver omap_i2c requests probe deferral
  220. [ 26.691527] omap_i2c 48072000.i2c: did not get pins for i2c error: -19
  221. [ 26.692232] omap_i2c 48072000.i2c: bus 0 rev0.12 at 100 kHz
  222. [ 26.692398] omap_i2c 48060000.i2c: did not get pins for i2c error: -19
  223. [ 26.692875] omap_i2c 48060000.i2c: bus 1 rev0.12 at 100 kHz
  224. [ 26.692977] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19
  225. [ 26.693439] omap_i2c 4807a000.i2c: bus 2 rev0.12 at 100 kHz
  226. [ 26.693498] omap_i2c 4807c000.i2c: could not find pctldev for node /ocp/pinmux@4a002840/pinmux_i2c5_pins, deferring probe
  227. [ 26.693516] platform 4807c000.i2c: Driver omap_i2c requests probe deferral
  228. [ 26.697145] Switched to clocksource arch_sys_counter
  229. [ 26.763928] NET: Registered protocol family 2
  230. [ 26.764951] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  231. [ 26.765197] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
  232. [ 26.767434] TCP: Hash tables configured (established 8192 bind 8192)
  233. [ 26.767535] TCP: reno registered
  234. [ 26.767553] UDP hash table entries: 512 (order: 3, 40960 bytes)
  235. [ 26.767855] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  236. [ 26.768782] NET: Registered protocol family 1
  237. [ 26.769562] RPC: Registered named UNIX socket transport module.
  238. [ 26.769572] RPC: Registered udp transport module.
  239. [ 26.769579] RPC: Registered tcp transport module.
  240. [ 26.769586] RPC: Registered tcp NFSv4.1 backchannel transport module.
  241. [ 26.770100] NetWinder Floating Point Emulator V0.97 (double precision)
  242. [ 26.861716] bounce pool size: 64 pages
  243. [ 26.862066] VFS: Disk quotas dquot_6.5.2
  244. [ 26.862213] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  245. [ 26.863675] NFS: Registering the id_resolver key type
  246. [ 26.863887] Key type id_resolver registered
  247. [ 26.863898] Key type id_legacy registered
  248. [ 26.863965] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  249. [ 26.864321] msgmni has been set to 1459
  250. [ 26.866179] io scheduler noop registered
  251. [ 26.866188] io scheduler deadline registered
  252. [ 26.866248] io scheduler cfq registered (default)
  253. [ 26.867252] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438
  254. [ 26.867595] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56
  255. [ 26.869585] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  256. [ 26.873008] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  257. [ 26.873808] omap_uart 4806c000.serial: did not get pins for uart1 error: -19
  258. [ 26.874019] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  259. [ 26.874852] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  260. [ 28.367121] console [ttyO2] enabled
  261. [ 28.371314] omap_uart 4806e000.serial: did not get pins for uart3 error: -19
  262. [ 28.378883] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  263. [ 28.387652] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 137) is a OMAP UART4
  264. [ 28.396096] omap_uart 48068000.serial: did not get pins for uart5 error: -19
  265. [ 28.403682] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 138) is a OMAP UART5
  266. [ 28.425820] brd: module loaded
  267. [ 28.436978] loop: module loaded
  268. [ 28.443199] mtdoops: mtd device (mtddev=name/number) must be supplied
  269. [ 28.455963] usbcore: registered new interface driver asix
  270. [ 28.461810] usbcore: registered new interface driver ax88179_178a
  271. [ 28.468352] usbcore: registered new interface driver cdc_ether
  272. [ 28.474658] usbcore: registered new interface driver r815x
  273. [ 28.480604] usbcore: registered new interface driver smsc95xx
  274. [ 28.486781] usbcore: registered new interface driver net1080
  275. [ 28.492884] usbcore: registered new interface driver cdc_subset
  276. [ 28.499264] usbcore: registered new interface driver zaurus
  277. [ 28.505302] usbcore: registered new interface driver cdc_ncm
  278. [ 28.512053] usbcore: registered new interface driver cdc_wdm
  279. [ 28.518164] usbcore: registered new interface driver usb-storage
  280. [ 28.524660] usbcore: registered new interface driver usbtest
  281. [ 28.531462] mousedev: PS/2 mouse device common for all mice
  282. [ 28.540034] i2c /dev entries driver
  283. [ 28.545198] Driver for 1-wire Dallas network protocol.
  284. [ 28.553447] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  285. [ 28.562139] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
  286. [ 28.569741] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
  287. [ 28.577332] omap_hsmmc 4809c000.mmc: vmmc regulator missing
  288. [ 28.583282] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
  289. [ 28.590568] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
  290. [ 28.597878] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
  291. [ 28.605406] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
  292. [ 28.612979] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
  293. [ 28.620731] omap_hsmmc 480b4000.mmc: pins are not configured from the driver
  294. [ 28.668059] omap-dma-engine 4a056000.dma-controller: allocating channel for 78
  295. [ 28.675759] omap-dma-engine 4a056000.dma-controller: allocating channel for 77
  296. [ 28.683455] omap_hsmmc 480ad000.mmc: vmmc regulator missing
  297. [ 28.689316] omap-dma-engine 4a056000.dma-controller: freeing channel for 77
  298. [ 28.696628] omap-dma-engine 4a056000.dma-controller: freeing channel for 78
  299. [ 28.706156] ledtrig-cpu: registered to indicate activity on CPUs
  300. [ 28.713103] usbcore: registered new interface driver usbhid
  301. [ 28.718940] usbhid: USB HID core driver
  302. [ 28.723526] oprofile: no performance counters
  303. [ 28.729029] oprofile: using timer interrupt.
  304. [ 28.733810] TCP: cubic registered
  305. [ 28.737270] Initializing XFRM netlink socket
  306. [ 28.741795] NET: Registered protocol family 17
  307. [ 28.746468] NET: Registered protocol family 15
  308. [ 28.751296] Key type dns_resolver registered
  309. [ 28.755805] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  310. [ 28.763824] ThumbEE CPU extension supported.
  311. [ 28.765437] mmc0: new high speed MMC card at address 0001
  312. [ 28.774978] mmcblk0: mmc0:0001 SEM08G 7.39 GiB
  313. [ 28.780014] mmcblk0boot0: mmc0:0001 SEM08G partition 1 2.00 MiB
  314. [ 28.786458] mmcblk0boot1: mmc0:0001 SEM08G partition 2 2.00 MiB
  315. [ 28.796286] omap_i2c 48070000.i2c: bus 3 rev0.12 at 400 kHz
  316. [ 28.802999] palmas 3-0048: Irq flag is 0x00000000
  317. [ 28.809764] Alternate GPT is invalid, using primary GPT.
  318. [ 28.815332] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  319. [ 28.823676] palmas 3-0048: Muxing GPIO 2, PWM 0, LED 0
  320. [ 28.832360] mmcblk0boot1: unknown partition table
  321. [ 28.838356] smps123: 600 <--> 1500 mV at 1060 mV
  322. [ 28.844522] mmcblk0boot0: unknown partition table
  323. [ 28.851156] smps45: 600 <--> 1310 mV at 1030 mV
  324. [ 28.858660] smps6: 1200 mV
  325. [ 28.863698] smps7: 1800 mV
  326. [ 28.868601] smps8: 600 <--> 1310 mV at 1040 mV
  327. [ 28.875372] smps9: 2100 mV
  328. [ 28.879978] smps10: 5000 mV
  329. [ 28.883754] ldo1: 1500 <--> 1800 mV
  330. [ 28.889180] ldo2: 2800 mV
  331. [ 28.893697] ldo3: 1500 mV
  332. [ 28.897626] ldo4: 1500 <--> 1800 mV
  333. [ 28.903153] ldo5: 1800 mV
  334. [ 28.907690] ldo6: 1200 mV
  335. [ 28.912168] ldo7: 2000 mV
  336. [ 28.916631] ldo8: 3000 mV
  337. [ 28.920770] ldo9: 1800 <--> 3000 mV at 3000 mV
  338. [ 28.927196] ldoln: 1800 mV
  339. [ 28.931760] ldousb: 3250 mV
  340. [ 28.935696] REGEN1: no parameters
  341. [ 28.939540] REGEN2: no parameters
  342. [ 28.943596] regen3: no parameters
  343. [ 28.947745] SYSEN1: no parameters
  344. [ 28.951599] SYSEN2: no parameters
  345. [ 28.956884] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
  346. [ 28.963043] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
  347. [ 28.970624] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
  348. [ 28.980363] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
  349. [ 29.027782] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  350. [ 29.034948] SYSEN1: disabling
  351. [ 29.038732] REGEN1: disabling
  352. [ 29.042311] ldo8: disabling
  353. [ 29.046095] ldo3: disabling
  354. [ 29.051530] Waiting for root device /dev/mmcblk1p2...
  355. [ 29.064077] mmc1: host does not support reading read-only switch. assuming write-enable.
  356. [ 29.074683] mmc1: new high speed SDHC card at address 0007
  357. [ 29.081170] mmcblk1: mmc1:0007 SD04G 3.72 GiB
  358. [ 29.089025] mmcblk1: p1 p2
  359. [ 32.530722] EXT4-fs (mmcblk1p2): recovery complete
  360. [ 32.553656] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  361. [ 32.562184] VFS: Mounted root (ext4 filesystem) on device 179:26.
  362. [ 32.579126] devtmpfs: mounted
  363. [ 32.582581] Freeing unused kernel memory: 376K (c0720000 - c077e000)
  364. Mounting proc : OK
  365. Mounting sysfs : OK
  366. Mounting devtmpfs:mount: mounting none on /dev failed: Device or resource busy
  367. boot mounted: OK
  368. /dev/ttyO2 linked to /dev/tty-bd - using as console
  369.  
  370. ******************************************
  371. Starting System Init for GenericOMAP5(FlattenedDeviceTree)
  372. Release: X.x
  373. Kernel: Linux GenericOMAP5(FlattenedDeviceTree) 3.11.0-rc1-00014-g88f50b2 #7 SMP Wed Jul 17 11:33:26 CDT 2013 armv7l GNU/Linux
  374. ******************************************
  375. Saving kernel ring buffer : OK
  376. Mounting devpts : OK
  377. Setting up networking
  378. Configuring lo : OK
  379. Starting syslogd : OK
  380. Starting klogd : OK
  381. Mounting filesystems : OK
  382. mount: mounting none on /proc/bus/usb/ failed: No such file or directory
  383.  
  384. Please press Enter to activate this console.
  385.  
  386. / $
  387. / $
  388. / $ cd /sys/class/regulator/
  389. /sys/class/regulator $ for i in regulator.[0-9] regulator.1[0-9] regulator.2[0
  390. -9]
  391. `ca> do
  392.  
  393. c> echo "+++++ $i : "`cat $i/name`
  394. > cat $i/state
  395. > cat $i/num_users
  396. > done
  397. +++++ regulator.0 : regulator-dummy
  398. cat: can't open 'regulator.0/state': No such file or directory
  399. 0
  400. +++++ regulator.1 : vmmcsd_fixed
  401. cat: can't open 'regulator.1/state': No such file or directory
  402. 1
  403. +++++ regulator.2 : hsusb2_reset
  404. disabled
  405. 0
  406. +++++ regulator.3 : hsusb3_reset
  407. disabled
  408. 0
  409. +++++ regulator.4 : smps123
  410. enabled
  411. 0
  412. +++++ regulator.5 : smps45
  413. enabled
  414. 0
  415. +++++ regulator.6 : smps6
  416. enabled
  417. 0
  418. +++++ regulator.7 : smps7
  419. enabled
  420. 0
  421. +++++ regulator.8 : smps8
  422. enabled
  423. 0
  424. +++++ regulator.9 : smps9
  425. disabled
  426. 0
  427. +++++ regulator.10 : smps10
  428. enabled
  429. 0
  430. +++++ regulator.11 : ldo1
  431. disabled
  432. 0
  433. +++++ regulator.12 : ldo2
  434. disabled
  435. 0
  436. +++++ regulator.13 : ldo3
  437. disabled
  438. 0
  439. +++++ regulator.14 : ldo4
  440. disabled
  441. 0
  442. +++++ regulator.15 : ldo5
  443. enabled
  444. 0
  445. +++++ regulator.16 : ldo6
  446. enabled
  447. 0
  448. +++++ regulator.17 : ldo7
  449. disabled
  450. 0
  451. +++++ regulator.18 : ldo8
  452. disabled
  453. 0
  454. +++++ regulator.19 : ldo9
  455. enabled
  456. 1
  457. +++++ regulator.20 : ldoln
  458. enabled
  459. 0
  460. +++++ regulator.21 : ldousb
  461. enabled
  462. 0
  463. +++++ regulator.22 : REGEN1
  464. disabled
  465. 0
  466. +++++ regulator.23 : REGEN2
  467. disabled
  468. 0
  469. +++++ regulator.24 : regen3
  470. enabled
  471. 0
  472. +++++ regulator.25 : SYSEN1
  473. disabled
  474. 0
  475. +++++ regulator.26 : SYSEN2
  476. disabled
  477. 0
  478. /sys/class/regulator $
  479. Skipping tty reset...
  480. Thanks for using picocom
  481. picocom v1.4
  482.  
  483. port is : /dev/ttyUSB0
  484. flowcontrol : none
  485. baudrate is : 115200
  486. parity is : none
  487. databits are : 8
  488. escape is : C-a
  489. noinit is : yes
  490. noreset is : yes
  491. nolock is : yes
  492. send_cmd is : ascii_xfr -s -v -l10
  493. receive_cmd is : rz -vv
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!