Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012
- root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
- CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz (1595.33-MHz 686-class CPU)
- Origin = "GenuineIntel" Id = 0xf24 Family = f Model = 2 Stepping = 4
- Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
- real memory = 1342177280 (1280 MB)
- avail memory = 1295364096 (1235 MB)
- kbd1 at kbdmux0
- acpi0: <DELL CPi R > on motherboard
- acpi0: reservation of 0, 9fc00 (3) failed
- acpi0: reservation of 100000, 4fef0000 (3) failed
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- cpu0: <ACPI CPU> on acpi0
- acpi_acad0: <AC Adapter> on acpi0
- battery0: <ACPI Control Method Battery> on acpi0
- battery1: <ACPI Control Method Battery> on acpi0
- acpi_lid0: <Control Method Lid Switch> on acpi0
- acpi_button0: <Power Button> on acpi0
- acpi_button1: <Sleep Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid
- pci0: <ACPI PCI bus> on pcib0
- agp0: <Intel 82845 host to AGP bridge> on hostb0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xe0000000-0xe7ffffff,0xdff80000-0xdfffffff irq 11 at device 0.0 on pci1
- uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
- uhci0: LegSup = 0x2f00
- usbus0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
- uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
- uhci1: LegSup = 0x2f00
- usbus1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1
- pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pcib2: failed to allocate initial I/O port window: 0xe000-0xffff
- pcib2: failed to allocate initial memory window: 0xf4000000-0xfbffffff
- pci2: <ACPI PCI bus> on pcib2
- xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2
- miibus0: <MII bus> on xl0
- ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0
- ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
- xl0: Ethernet address: 00:08:74:05:76:d8
- cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2
- cardbus0: <CardBus bus> on cbb0
- pccard0: <16-bit PCCard bus> on cbb0
- cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2
- cardbus1: <CardBus bus> on cbb1
- pccard1: <16-bit PCCard bus> on cbb1
- fwohci0: <Texas Instruments PCI4451> mem 0xf8fff000-0xf8fff7ff,0xf8ff8000-0xf8ffbfff irq 11 at device 1.2 on pci2
- fwohci0: OHCI version 1.0 (ROM=1)
- fwohci0: No. of Isochronous channels is 4.
- fwohci0: EUI64 42:4f:c0:00:0f:d6:54:21
- fwohci0: Phy 1394a available S400, 1 ports.
- fwohci0: Link S400, max_rec 2048 bytes.
- firewire0: <IEEE1394(FireWire) bus> on fwohci0
- dcons_crom0: <dcons configuration ROM> on firewire0
- dcons_crom0: bus_addr 0x1704000
- fwe0: <Ethernet over FireWire> on firewire0
- if_fwe0: Fake Ethernet address: 42:4f:c0:d6:54:21
- fwe0: Ethernet address: 42:4f:c0:d6:54:21
- fwip0: <IP over FireWire> on firewire0
- fwip0: Firewire address: 42:4f:c0:00:0f:d6:54:21 @ 0xfffe00000000, S400, maxrec 2048
- fwohci0: Initiate bus reset
- fwohci0: fwohci_intr_core: BUS reset
- fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
- iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xf8ffe000-0xf8ffefff irq 11 at device 3.0 on pci2
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
- ata0: <ATA channel 0> on atapci0
- ata1: <ATA channel 1> on atapci0
- pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc80-0xdcbf irq 9 at device 31.5 on pci0
- pcm0: <Cirrus Logic CS4205 AC97 Codec>
- pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
- acpi_tz0: <Thermal Zone> on acpi0
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- psm0: <PS/2 Mouse> irq 12 on atkbdc0
- psm0: [GIANT-LOCKED]
- psm0: model GlidePoint, device ID 0
- atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
- fd0: <1440-KB 3.5" drive> on fdc0 drive 0
- uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
- ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
- ppc0: FIFO with 16/16/8 bytes threshold
- ppbus0: <Parallel port bus> on ppc0
- plip0: <PLIP network interface> on ppbus0
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- pmtimer0 on isa0
- orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff pnpid ORM0000 on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- acpi_perf0: <ACPI CPU Frequency Control> on cpu0
- acpi_perf0: failed in PERF_STATUS attach
- device_attach: acpi_perf0 attach returned 6
- acpi_perf0: <ACPI CPU Frequency Control> on cpu0
- acpi_perf0: failed in PERF_STATUS attach
- device_attach: acpi_perf0 attach returned 6
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- ichss0: <SpeedStep ICH> on cpu0
- Timecounters tick every 1.000 msec
- firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
- firewire0: bus manager 0
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 12Mbps Full Speed USB v1.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ada0 at ata0 bus 0 scbus0 target 0 lun 0
- ada0: <SAMSUNG HM160HC LQ100-10> ATA-8 device
- ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
- ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad0
- Timecounter "TSC" frequency 1595325936 Hz quality 800
- cd0 at ata0 bus 0 scbus0 target 1 lun 0
- cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device
- cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- ugen0.2: <vendor 0x15d9> at usbus0
- ums0: <vendor 0x15d9 USB Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0
- ums0: 3 buttons and [XYZ] coordinates ID=0
- Trying to mount root from ufs:/dev/ada0p2 [rw]...
- wlan0: Ethernet address: 00:16:6f:b5:eb:8a
- iwi0: need multicast update callback
- iwi0: need multicast update callback
- iwi0: need multicast update callback
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement