Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@feld-bert:/home/markus# lspci -vv
- 00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part
- Subsystem: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Region 3: Memory at <ignored> (64-bit, non-prefetchable)
- Capabilities: [c4] HyperTransport: Slave or Primary Interface
- Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
- Revision ID: 3.00
- Link Frequency 0: 1.0GHz
- Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
- Link Frequency 1: 200MHz
- Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
- Prefetchable memory behind bridge Upper: 00-00
- Bus Number: 00
- Capabilities: [40] HyperTransport: Retry Mode
- Capabilities: [54] HyperTransport: UnitID Clumping
- Capabilities: [9c] HyperTransport: #1a
- 00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 0000c000-0000cfff
- Memory behind bridge: fa000000-fe9fffff
- Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag+ RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -3.5dB
- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4129
- Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5958
- Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
- Capabilities: [110 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Kernel driver in use: pcieport
- 00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 0000d000-0000dfff
- Memory behind bridge: fea00000-feafffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag+ RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB
- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4141
- Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5958
- Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
- Capabilities: [110 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Kernel driver in use: pcieport
- 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 22
- Region 0: I/O ports at b000 [size=8]
- Region 1: I/O ports at a000 [size=4]
- Region 2: I/O ports at 9000 [size=8]
- Region 3: I/O ports at 8000 [size=4]
- Region 4: I/O ports at 7000 [size=16]
- Region 5: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [60] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: ahci
- 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10 [OHCI])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci_hcd
- 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10 [OHCI])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin B routed to IRQ 17
- Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci_hcd
- 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10 [OHCI])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin C routed to IRQ 18
- Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci_hcd
- 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10 [OHCI])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin B routed to IRQ 17
- Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci_hcd
- 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10 [OHCI])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin C routed to IRQ 18
- Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [size=4K]
- Kernel driver in use: ohci_hcd
- 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin D routed to IRQ 19
- Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=256]
- Capabilities: [c0] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Bridge: PM- B3+
- Capabilities: [e4] Debug port: BAR=1 offset=00e0
- Kernel driver in use: ehci_hcd
- 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Region 0: I/O ports at 0b00 [size=16]
- Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
- Kernel driver in use: piix4_smbus
- 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64
- Interrupt: pin A routed to IRQ 16
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4 [size=1]
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374 [size=1]
- Region 4: I/O ports at ff00 [size=16]
- Kernel driver in use: pata_atiixp
- 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: snd_hda_intel
- 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
- Subsystem: Micro-Star International Co., Ltd. Device 7388
- Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
- I/O behind bridge: 0000e000-0000efff
- Memory behind bridge: feb00000-febfffff
- Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Capabilities: [80] HyperTransport: Host or Secondary Interface
- Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
- Revision ID: 1.02
- Link Frequency: 1.0GHz
- Link Error: <Prot- <Ovfl- <EOC- CTLTm-
- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
- 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Capabilities: [f0] Secure device <?>
- Kernel driver in use: k8temp
- 01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600GT] (rev a1) (prog-if 00 [VGA controller])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 18
- Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
- Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
- Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
- Region 5: I/O ports at c800 [size=128]
- [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
- Capabilities: [60] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [78] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Capabilities: [128 v1] Power Budgeting <?>
- Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
- Kernel driver in use: nvidia
- 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
- Subsystem: Micro-Star International Co., Ltd. Device 388c
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 42
- Region 0: I/O ports at d800 [size=256]
- Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
- Expansion ROM at feac0000 [disabled] [size=128K]
- Capabilities: [40] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [48] Vital Product Data
- Unknown small resource type 05, will not decode more.
- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
- Address: 00000000fee0300c Data: 4159
- Capabilities: [60] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited
- ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [84] Vendor Specific Information: Len=4c <?>
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
- Capabilities: [12c v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Capabilities: [148 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
- Capabilities: [154 v1] Power Budgeting <?>
- Kernel driver in use: r8169
- 03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 46) (prog-if 10 [OHCI])
- Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
- Latency: 64 (8000ns max), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 21
- Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
- Region 1: I/O ports at e800 [size=128]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: firewire_ohci
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement