root@brzi:/ # dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #2 r242394M: Wed Oct 31 13:34:27 CET 2012
    root@brzi.nmw:/usr/obj/usr/src/sys/PILA amd64
CPU: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz (1662.54-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f2  Family = 0x6  Model = 0xf  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 2029928448 (1935 MB)
ACPI APIC Table: <Sony VAIO>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
hpt27xx: RocketRAID 27xx controller driver v1.0 (Oct 31 2012 13:31:01)
acpi0: <Sony> on motherboard
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xd1000000-0xd1ffffff,0xb0000000-0xbfffffff,0xd0000000-0xd0ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce Go 7400> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <Intel 82801G HDA Controller> mem 0xd2300000-0xd2303fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8036 Fast Ethernet> port 0x2000-0x20ff mem 0xc8000000-0xc8003fff irq 16 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x01> on mskc0
msk0: disabling jumbo frame support
msk0: Ethernet address: 00:13:a9:a7:d5:27
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci6: <ACPI PCI bus> on pcib4
ath0: <Atheros 9280> mem 0xcc000000-0xcc00ffff irq 18 at device 0.0 on pci6
ath0: [HT] enabling HT modes
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9280 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib5: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x1800-0x181f irq 23 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x1820-0x183f irq 17 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x1860-0x187f irq 16 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd2305000-0xd23053ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> at device 3.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xd2005000-0xd20057ff,0xd2000000-0xd2003fff irq 16 at device 3.1 on pci10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:02:52:63:c2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x22d0000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:52:63:c2
fwe0: Ethernet address: 0a:00:46:52:63:c2
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 08:00:46:03:02:52:63:c2 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci10: <mass storage> at device 3.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH7M AHCI SATA controller> port 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem 0xd2305400-0xd23057ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <dasp> at device 31.4 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_sony0: <Sony notebook controller> on acpi0
acpi_sony0: PID 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xe0000-0xe17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
Timecounters tick every 10.000 msec
hpt27xx: no controller detected.
hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,25 on hdaa0
hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0
unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST9250421AS SD13> ATA-8 SATA 2.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 12988604 Hz quality 1000
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <PIONEER DVD-RW  DVR-K17 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ada0p4 [rw]...
wlan0: Ethernet address: c8:bc:c8:c5:0b:33
acpi_acad0: unknown notify 0x81
pid 2365 (at-spi2-registryd), uid 1001: exited on signal 10
acpi_acad0: unknown notify 0x81