Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

dapper acpi=off apm=power_off cusi-fx !OK!

By: camelseller on Jul 31st, 2011  |  syntax: None  |  size: 16.71 KB  |  views: 71  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. $ dmesg
  2. [4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3  (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
  3. [4294667.296000] BIOS-provided physical RAM map:
  4. [4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  5. [4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  6. [4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  7. [4294667.296000]  BIOS-e820: 0000000000100000 - 000000000effc000 (usable)
  8. [4294667.296000]  BIOS-e820: 000000000effc000 - 000000000efff000 (ACPI data)
  9. [4294667.296000]  BIOS-e820: 000000000efff000 - 000000000f000000 (ACPI NVS)
  10. [4294667.296000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
  11. [4294667.296000] 0MB HIGHMEM available.
  12. [4294667.296000] 239MB LOWMEM available.
  13. [4294667.296000] On node 0 totalpages: 61436
  14. [4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
  15. [4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
  16. [4294667.296000]   Normal zone: 57340 pages, LIFO batch:15
  17. [4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
  18. [4294667.296000] DMI 2.3 present.
  19. [4294667.296000] Allocating PCI resources starting at 10000000 (gap: 0f000000:f0 f80000)
  20. [4294667.296000] Built 1 zonelists
  21. [4294667.296000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper ini trd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet acpi=off apm=p ower_off nosplash vga=0x33b debian-installer/locale=it kbd-chooser/method=it
  22. [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable i t with "lapic"
  23. [4294667.296000] mapped APIC to ffffd000 (011e1000)
  24. [4294667.296000] Initializing CPU#0
  25. [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
  26. [    0.000000] Detected 930.369 MHz processor.
  27. [   79.921312] Using tsc for high-res timesource
  28. [   79.921374] Console: colour dummy device 80x25
  29. [   79.922072] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  30. [   79.922672] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  31. [   79.950764] Memory: 232884k/245744k available (1976k kernel code, 12256k rese rved, 606k data, 288k init, 0k highmem)
  32. [   79.950774] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  33. [   80.010662] Calibrating delay using timer specific routine.. 1861.90 BogoMIPS  (lpj=930952)
  34. [   80.010729] Security Framework v1.0.0 initialized
  35. [   80.010749] SELinux:  Disabled at boot.
  36. [   80.010777] Mount-cache hash table entries: 512
  37. [   80.010969] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 000 00000 00000000 00000000 00000000
  38. [   80.010984] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 0000 0000 00000000 00000000 00000000
  39. [   80.011002] CPU: L1 I cache: 16K, L1 D cache: 16K
  40. [   80.011008] CPU: L2 cache: 256K
  41. [   80.011015] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 0 0000000 00000000 00000000
  42. [   80.011048] mtrr: v2.0 (20020519)
  43. [   80.011058] CPU: Intel Pentium III (Coppermine) stepping 0a
  44. [   80.011067] Enabling fast FPU save and restore... done.
  45. [   80.011072] Enabling unmasked SIMD FPU exception support... done.
  46. [   80.011081] Checking 'hlt' instruction... OK.
  47. [   80.015065] checking if image is initramfs... it is
  48. [   81.759365] Freeing initrd memory: 6838k freed
  49. [   81.804895] NET: Registered protocol family 16
  50. [   81.804976] EISA bus registered
  51. [   81.805743] PCI: PCI BIOS revision 2.10 entry at 0xf0eb0, last bus=1
  52. [   81.805762] PCI: Using configuration type 1
  53. [   81.806706] ACPI: Subsystem revision 20051216
  54. [   81.806711] ACPI: Interpreter disabled.
  55. [   81.806721] Linux Plug and Play Support v0.97 (c) Adam Belay
  56. [   81.806737] pnp: PnP ACPI: disabled
  57. [   81.806747] PnPBIOS: Scanning system for PnP BIOS support...
  58. [   81.806942] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbee0
  59. [   81.806951] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf10, dseg 0xf0000
  60. [   81.808045] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
  61. [   81.808098] PCI: Probing PCI hardware
  62. [   81.808109] PCI: Probing PCI hardware (bus 00)
  63. [   81.808390] Uncovering SIS18 that hid as a SIS503 (compatible=0)
  64. [   81.808396] Enabling SiS 96x SMBus.
  65. [   81.808703] Boot video device is 0000:01:00.0
  66. [   81.809270] PCI: Using IRQ router SIS [1039/0018] at 0000:00:01.0
  67. [   81.811803] pnp: 00:11: ioport range 0x290-0x297 has been reserved
  68. [   81.811811] pnp: 00:11: ioport range 0xe400-0xe47f has been reserved
  69. [   81.811818] pnp: 00:11: ioport range 0xe480-0xe4ff has been reserved
  70. [   81.811824] pnp: 00:11: ioport range 0x480-0x48f has been reserved
  71. [   81.812207] PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
  72. [   81.812213] PCI: Bridge: 0000:00:02.0
  73. [   81.812219]   IO window: a000-afff
  74. [   81.812228]   MEM window: e9800000-e9ffffff
  75. [   81.812236]   PREFETCH window: f0000000-feafffff
  76. [   81.812255] PCI: Setting latency timer of device 0000:00:02.0 to 64
  77. [   81.813168] audit: initializing netlink socket (disabled)
  78. [   81.813194] audit(1312137253.676:1): initialized
  79. [   81.813473] VFS: Disk quotas dquot_6.5.1
  80. [   81.813526] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  81. [   81.813659] Initializing Cryptographic API
  82. [   81.813669] io scheduler noop registered
  83. [   81.813683] io scheduler anticipatory registered
  84. [   81.813693] io scheduler deadline registered
  85. [   81.813715] io scheduler cfq registered
  86. [   81.814093] isapnp: Scanning for PnP cards...
  87. [   82.170137] isapnp: No Plug & Play device found
  88. [   82.205972] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
  89. [   83.221323] serio: i8042 AUX port at 0x60,0x64 irq 12
  90. [   83.222044] serio: i8042 KBD port at 0x60,0x64 irq 1
  91. [   83.222131] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing  enabled
  92. [   83.222299] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  93. [   83.222511] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  94. [   83.228271] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  95. [   83.228679] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  96. [   83.229825] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 bl ocksize
  97. [   83.229955] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  98. [   83.229965] ide: Assuming 33MHz system bus speed for PIO modes; override with  idebus=xx
  99. [   83.230280] mice: PS/2 mouse device common for all mice
  100. [   83.231781] EISA: Probing bus 0 at eisa.0
  101. [   83.231825] EISA: Detected 0 cards.
  102. [   83.231927] NET: Registered protocol family 2
  103. [   83.267161] input: AT Translated Set 2 keyboard as /class/input/input0
  104. [   83.267353] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  105. [   83.267938] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  106. [   83.268061] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  107. [   83.268188] TCP: Hash tables configured (established 8192 bind 8192)
  108. [   83.268195] TCP reno registered
  109. [   83.268392] TCP bic registered
  110. [   83.268414] NET: Registered protocol family 1
  111. [   83.268438] NET: Registered protocol family 8
  112. [   83.268443] NET: Registered protocol family 20
  113. [   83.268489] Using IPI Shortcut mode
  114. [   83.268576] Freeing unused kernel memory: 288k freed
  115. [   83.389832] vesafb: framebuffer at 0xf0000000, mapped to 0xcf880000, using 37 50k, total 16384k
  116. [   83.389845] vesafb: mode is 800x600x32, linelength=3200, pages=3
  117. [   83.389851] vesafb: protected mode interface info at cbe5:000c
  118. [   83.389855] vesafb: scrolling: redraw
  119. [   83.389861] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  120. [   83.389868] vesafb: Mode is VGA compatible
  121. [   83.412680] Console: switching to colour frame buffer device 100x37
  122. [   83.412690] fb0: VESA VGA frame buffer device
  123. [   83.442145] Capability LSM initialized
  124. [   84.596483] SIS5513: IDE controller at PCI slot 0000:00:00.1
  125. [   84.596515] SIS5513: chipset revision 208
  126. [   84.596520] SIS5513: not 100% native mode: will probe irqs later
  127. [   84.596532] SIS5513: SiS630 ATA 66 controller
  128. [   84.596576]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DM A
  129. [   84.596597]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pi o
  130. [   84.596613] Probing IDE interface ide0...
  131. [   84.860205] hda: Maxtor 6L250S0, ATA DISK drive
  132. [   85.573721] hdb: CDRW5224, ATAPI CD/DVD-ROM drive
  133. [   85.625725] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  134. [   85.626218] Probing IDE interface ide1...
  135. [   86.159418] hda: max request size: 1024KiB
  136. [   86.178756] hda: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/25 5/63, UDMA(33)
  137. [   86.180208] hda: cache flushes supported
  138. [   86.180589]  hda: hda1 hda2 hda3
  139. [   86.205587] hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
  140. [   86.205611] Uniform CD-ROM driver Revision: 3.20
  141. [   86.507399] usbcore: registered new driver usbfs
  142. [   86.508248] usbcore: registered new driver hub
  143. [   86.512758] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Dri ver (PCI)
  144. [   86.513522] PCI: Found IRQ 5 for device 0000:00:01.2
  145. [   86.513543] PCI: Sharing IRQ 5 with 0000:00:01.3
  146. [   86.513574] ohci_hcd 0000:00:01.2: OHCI Host Controller
  147. [   86.524809] ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus numbe r 1
  148. [   86.524834] ohci_hcd 0000:00:01.2: irq 5, io mem 0xeb000000
  149. [   86.577433] hub 1-0:1.0: USB hub found
  150. [   86.577471] hub 1-0:1.0: 3 ports detected
  151. [   86.678076] PCI: Found IRQ 5 for device 0000:00:01.3
  152. [   86.678092] PCI: Sharing IRQ 5 with 0000:00:01.2
  153. [   86.678123] ohci_hcd 0000:00:01.3: OHCI Host Controller
  154. [   86.688963] ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus numbe r 2
  155. [   86.688984] ohci_hcd 0000:00:01.3: irq 5, io mem 0xea800000
  156. [   86.742152] hub 2-0:1.0: USB hub found
  157. [   86.742176] hub 2-0:1.0: 2 ports detected
  158. [   86.894694] usb 1-1: new low speed USB device using ohci_hcd and address 2
  159. [   86.904717] Probing IDE interface ide1...
  160. [   87.067264] usbcore: registered new driver hiddev
  161. [   87.080858] input: Microsoft Comfort Optical Mouse 1000 as /class/input/input 1
  162. [   87.081034] input: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000]  on usb-0000:00:01.2-1
  163. [   87.081062] usbcore: registered new driver usbhid
  164. [   87.081069] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  165. [   88.022599] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  166. [   88.022613] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  167. [   88.022621] ide: failed opcode was: unknown
  168. [   88.022628] end_request: I/O error, dev hdb, sector 1429192
  169. [   88.022638] Buffer I/O error on device hdb, logical block 357298
  170. [   88.043989] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  171. [   88.043997] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  172. [   88.044004] ide: failed opcode was: unknown
  173. [   88.044009] end_request: I/O error, dev hdb, sector 1429192
  174. [   88.044015] Buffer I/O error on device hdb, logical block 357298
  175. [   88.065384] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  176. [   88.065393] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  177. [   88.065400] ide: failed opcode was: unknown
  178. [   88.065405] end_request: I/O error, dev hdb, sector 1429192
  179. [   88.065411] Buffer I/O error on device hdb, logical block 357298
  180. [   88.086785] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  181. [   88.086793] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  182. [   88.086800] ide: failed opcode was: unknown
  183. [   88.086805] end_request: I/O error, dev hdb, sector 1429192
  184. [   88.086811] Buffer I/O error on device hdb, logical block 357298
  185. [   88.122443] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  186. [   88.122452] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  187. [   88.122459] ide: failed opcode was: unknown
  188. [   88.122464] end_request: I/O error, dev hdb, sector 1429192
  189. [   88.122470] Buffer I/O error on device hdb, logical block 357298
  190. [   88.143843] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  191. [   88.143851] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  192. [   88.143858] ide: failed opcode was: unknown
  193. [   88.143863] end_request: I/O error, dev hdb, sector 1429192
  194. [   88.143869] Buffer I/O error on device hdb, logical block 357298
  195. [   88.179283] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  196. [   88.179292] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  197. [   88.179298] ide: failed opcode was: unknown
  198. [   88.179304] end_request: I/O error, dev hdb, sector 1429184
  199. [   88.179310] Buffer I/O error on device hdb, logical block 357296
  200. [   88.186330] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  201. [   88.186339] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  202. [   88.186345] ide: failed opcode was: unknown
  203. [   88.186351] end_request: I/O error, dev hdb, sector 1429188
  204. [   88.186356] Buffer I/O error on device hdb, logical block 357297
  205. [   88.193549] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  206. [   88.193558] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  207. [   88.193564] ide: failed opcode was: unknown
  208. [   88.193570] end_request: I/O error, dev hdb, sector 1429184
  209. [   88.193576] Buffer I/O error on device hdb, logical block 357296
  210. [   88.200592] hdb: media error (bad sector): status=0x51 { DriveReady SeekCompl ete Error }
  211. [   88.200600] hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
  212. [   88.200607] ide: failed opcode was: unknown
  213. [   88.200612] end_request: I/O error, dev hdb, sector 1429188
  214. [   88.200618] Buffer I/O error on device hdb, logical block 357297
  215. [   88.491861] ISO 9660 Extensions: Microsoft Joliet Level 3
  216. [   88.511536] ISO 9660 Extensions: RRIP_1991A
  217. [   88.555399] loop: loaded (max 8 devices)
  218. [   88.583073] Registering unionfs 1.1.2
  219. [   88.722680] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
  220. [  152.458388] sis900.c: v1.08.09 Sep. 19 2005
  221. [  152.459146] PCI: Found IRQ 10 for device 0000:00:01.1
  222. [  152.459896] 0000:00:01.1: SiS 900 Internal MII PHY transceiver found at addre ss 1.
  223. [  152.466916] 0000:00:01.1: Using transceiver found at address 1 as default
  224. [  154.124893] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 10, 00:e0:18:8f:37 :e8.
  225. [  197.788913] ts: Compaq touchscreen protocol output
  226. [  198.950731] NET: Registered protocol family 17
  227. [  199.779714] eth0: Media Link On 100mbps full-duplex
  228. [  201.754672] parport: PnPBIOS parport detected.
  229. [  201.754749] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE ,COMPAT,ECP,DMA]
  230. [  201.837139] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  231. [  201.853753] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  232. [  203.007471] Linux agpgart interface v0.101 (c) Dave Jones
  233. [  203.017040] agpgart: Detected SiS 630 chipset
  234. [  203.023015] agpgart: AGP aperture is 64M @ 0xec000000
  235. [  203.577409] input: PC Speaker as /class/input/input2
  236. [  203.762034] Real Time Clock Driver v1.12
  237. [  204.260955] NET: Registered protocol family 10
  238. [  204.261252] lo: Disabled Privacy Extensions
  239. [  204.261608] IPv6 over IPv4 tunneling driver
  240. [  206.331467] Adding 1044216k swap on /dev/hda3.  Priority:-1 extents:1 across: 1044216k
  241. [  207.178738] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
  242. [  207.178751] md: bitmap version 4.39
  243. [  207.934237] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@red hat.com
  244. [  211.121151] cdrom: hdb: mrw address space DMA selected
  245. [  211.123102] cdrom open: mrw_status 'not mrw'
  246. [  214.501310] eth0: no IPv6 routers present
  247. [  234.199612] [drm] Initialized drm 1.0.1 20051102
  248. [  234.501257] PCI: Found IRQ 11 for device 0000:01:00.0
  249. [  234.503300] [drm] Initialized sis 1.1.0 20030826 on minor 0
  250. [  234.505122] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
  251. [  234.505161] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
  252. [  234.505185] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
  253. [  244.329161] lp0: using parport0 (interrupt-driven).
  254. [  244.798342] ppdev: user-space parallel port driver
  255. [  253.152765] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  256. [  257.138690] hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
  257. [  257.138707] hdb: drive_cmd: error=0x04 { AbortedCommand }
  258. [  257.138713] ide: failed opcode was: 0xec
  259. [  272.896836] Bluetooth: Core ver 2.8
  260. [  272.896858] NET: Registered protocol family 31
  261. [  272.896862] Bluetooth: HCI device and connection manager initialized
  262. [  272.896912] Bluetooth: HCI socket layer initialized
  263. [  273.056042] Bluetooth: L2CAP ver 2.8
  264. [  273.056063] Bluetooth: L2CAP socket layer initialized
  265. [  273.406124] Bluetooth: RFCOMM socket layer initialized
  266. [  273.406187] Bluetooth: RFCOMM TTY layer initialized
  267. [  273.406192] Bluetooth: RFCOMM ver 1.7
  268. ubuntu@ubuntu:~$