Guest User

Intel Edison Mainline 4.8R3 (github.com/atlury)

a guest
Aug 25th, 2016
76
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 33.83 KB | None | 0 0
  1. ******************************
  2. PSH KERNEL VERSION: b0182b2b
  3.                 WR: 20104000
  4. ******************************
  5.  
  6. SCU IPC: 0x800000d0  0xfffce92c
  7.  
  8. PSH miaHOB version: TNG.B0.VVBD.0000000c
  9.  
  10. microkernel built 11:24:08 Feb  5 2015
  11.  
  12. ******* PSH loader *******
  13. PCM page cache size = 192 KB
  14. Cache Constraint = 0 Pages
  15. Arming IPC driver ..
  16. Adding page store pool ..
  17. PagestoreAddr(IMR Start Address) = 0x04899000
  18. pageStoreSize(IMR Size)          = 0x00080000
  19.  
  20. *** Ready to receive application ***
  21.  
  22.  
  23. U-Boot 2014.04 (Jun 24 2016 - 01:51:03)
  24.  
  25.        Watchdog enabled
  26. DRAM:  980.6 MiB
  27. MMC:   tangier_sdhci: 0
  28. In:    serial
  29. Out:   serial
  30. Err:   serial
  31. Hit any key to stop autoboot:  0
  32. Target:blank
  33. Partitioning already done...
  34. Flashing already done...
  35. GADGET DRIVER: usb_dnl_dfu
  36. 7210272 bytes read in 270 ms (25.5 MiB/s)
  37. Valid Boot Flag
  38. Setup Size = 0x00003e00
  39. Magic signature found
  40. Using boot protocol version 2.0d
  41. Linux kernel version 4.8.0-rc3 (root@ubuntu) #1 SMP Thu Aug 25 02:35:56 EDT 2016
  42. Building boot_params at 0x00090000
  43. Loading bzImage at address 00100000 (7194400 bytes)
  44. Magic signature found
  45. Kernel command line: "rootwait root=/dev/mmcblk0p5 rootfstype=ext4 rw console=tty1 console=ttyS2,115200n8 loglevel=8 g_multi.ethernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=b33f335811680145fdc309c8f189130c g_multi.dev_addr=02:00:86:89:13:0c platform_mrfld_audio.audio_codec=dummy init=/sbin/init"
  46.  
  47. Starting kernel ...
  48.  
  49. [    0.000000] Linux version 4.8.0-rc3 (root@ubuntu) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #1 SMP Thu Aug 25 02:35:56 EDT 2016
  50. [    0.000000] x86/fpu: Legacy x87 FPU detected.
  51. [    0.000000] x86/fpu: Using 'eager' FPU context switches.
  52. [    0.000000] e820: BIOS-provided physical RAM map:
  53. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
  54. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
  55. [    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000005ffffff] reserved
  56. [    0.000000] BIOS-e820: [mem 0x0000000006000000-0x000000003f4fffff] usable
  57. [    0.000000] BIOS-e820: [mem 0x000000003f500000-0x000000003fffffff] reserved
  58. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  59. [    0.000000] BIOS-e820: [mem 0x00000000fec04000-0x00000000fec07fff] reserved
  60. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  61. [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  62. [    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
  63. [    0.000000] SMBIOS 2.6 present.
  64. [    0.000000] DMI: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
  65. [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  66. [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  67. [    0.000000] e820: last_pfn = 0x3f500 max_arch_pfn = 0x100000
  68. [    0.000000] MTRR default type: uncachable
  69. [    0.000000] MTRR fixed ranges enabled:
  70. [    0.000000]   00000-9FFFF write-back
  71. [    0.000000]   A0000-BFFFF uncachable
  72. [    0.000000]   C0000-FFFFF write-back
  73. [    0.000000] MTRR variable ranges enabled:
  74. [    0.000000]   0 base 000000000 mask FC0000000 write-back
  75. [    0.000000]   1 base 03F600000 mask FFFE00000 uncachable
  76. [    0.000000]   2 base 03F800000 mask FFF800000 uncachable
  77. [    0.000000]   3 base 004000000 mask FFE000000 uncachable
  78. [    0.000000]   4 disabled
  79. [    0.000000]   5 disabled
  80. [    0.000000]   6 disabled
  81. [    0.000000]   7 disabled
  82. [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
  83. [    0.000000] e820: update [mem 0x04000000-0x05ffffff] usable ==> reserved
  84. [    0.000000] Scanning 1 areas for low memory corruption
  85. [    0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
  86. [    0.000000] Base memory trampoline at [c0094000] 94000 size 16384
  87. [    0.000000] BRK [0x01e3f000, 0x01e3ffff] PGTABLE
  88. [    0.000000] ACPI: Early table checksum verification disabled
  89. [    0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20160422/tbxfroot-243)
  90. [    0.000000] 125MB HIGHMEM available.
  91. [    0.000000] 887MB LOWMEM available.
  92. [    0.000000]   mapped low ram: 0 - 377fe000
  93. [    0.000000]   low ram: 0 - 377fe000
  94. [    0.000000] BRK [0x01e40000, 0x01e40fff] PGTABLE
  95. [    0.000000] Zone ranges:
  96. [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  97. [    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
  98. [    0.000000]   HighMem  [mem 0x00000000377fe000-0x000000003f4fffff]
  99. [    0.000000] Movable zone start for each node
  100. [    0.000000] Early memory node ranges
  101. [    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000097fff]
  102. [    0.000000]   node   0: [mem 0x0000000000100000-0x0000000003ffffff]
  103. [    0.000000]   node   0: [mem 0x0000000006000000-0x000000003f4fffff]
  104. [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f4fffff]
  105. [    0.000000] On node 0 totalpages: 251031
  106. [    0.000000] free_area_init_node: node 0, pgdat c1c9bc40, node_mem_map f700e020
  107. [    0.000000]   DMA zone: 32 pages used for memmap
  108. [    0.000000]   DMA zone: 0 pages reserved
  109. [    0.000000]   DMA zone: 3991 pages, LIFO batch:0
  110. [    0.000000]   Normal zone: 1744 pages used for memmap
  111. [    0.000000]   Normal zone: 215038 pages, LIFO batch:31
  112. [    0.000000]   HighMem zone: 32002 pages, LIFO batch:7
  113. [    0.000000] Using APIC driver default
  114. [    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
  115. [    0.000000] SFI: SYST E31F0, 0060 (v1  INTEL INTELFDK)
  116. [    0.000000] SFI: CPUS E3296, 0020 (v1  INTEL INTELFDK)
  117. [    0.000000] SFI: FREQ E32C2, 0030 (v1  INTEL INTELFDK)
  118. [    0.000000] SFI: MMAP E32FE, 01A4 (v1  INTEL INTELFDK)
  119. [    0.000000] SFI: XSDT E34B0, 002C (v1  INTEL INTELFDK)
  120. [    0.000000] SFI: APIC E353E, 0020 (v1  INTEL INTELFDK)
  121. [    0.000000] SFI: WAKE E356A, 0020 (v2  INTEL INTELFDK)
  122. [    0.000000] SFI: DEVS E359E, 047D (v1  INTEL INTELFDK)
  123. [    0.000000] SFI: GPIO E3A27, 0964 (v1  INTEL INTELFDK)
  124. [    0.000000] SFI: OEMB E4397, 0060 (v5 UMGFDK CFGINFO!)
  125. [    0.000000] SFI: registering lapic[0]
  126. [    0.000000] SFI: registering lapic[2]
  127. [    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-54
  128. [    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  129. [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  130. [    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x000fffff]
  131. [    0.000000] PM: Registered nosave memory: [mem 0x04000000-0x05ffffff]
  132. [    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
  133. [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  134. [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
  135. [    0.000000] percpu: Embedded 20 pages/cpu @f6fe0000 s50380 r0 d31540 u81920
  136. [    0.000000] pcpu-alloc: s50380 r0 d31540 u81920 alloc=20*4096
  137. [    0.000000] pcpu-alloc: [0] 0 [0] 1
  138. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 249255
  139. [    0.000000] Kernel command line: rootwait root=/dev/mmcblk0p5 rootfstype=ext4 rw console=tty1 console=ttyS2,115200n8 loglevel=8 g_multi.ethernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=b33f335811680145fdc309c8f189130c g_multi.dev_addr=02:00:86:89:13:0c platform_mrfld_audio.audio_codec=dummy init=/sbin/init
  140. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  141. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  142. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  143. [    0.000000] Initializing CPU#0
  144. [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
  145. [    0.000000] Initializing Movable for node 0 (00000000:00000000)
  146. [    0.000000] Memory: 980344K/1004124K available (9318K kernel code, 925K rwdata, 2908K rodata, 660K init, 680K bss, 23780K reserved, 0K cma-reserved, 128008K highmem)
  147. [    0.000000] virtual kernel memory layout:
  148. [    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
  149. [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  150. [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
  151. [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
  152. [    0.000000]       .init : 0xc1cdd000 - 0xc1d82000   ( 660 kB)
  153. [    0.000000]       .data : 0xc1919e1a - 0xc1cdb4c0   (3845 kB)
  154. [    0.000000]       .text : 0xc1000000 - 0xc1919e1a   (9319 kB)
  155. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  156. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  157. [    0.000000] Hierarchical RCU implementation.
  158. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  159. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  160. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  161. [    0.000000] NR_IRQS:2304 nr_irqs:512 0
  162. [    0.000000] CPU 0 irqstacks, hard=f6824000 soft=f6826000
  163. [    0.000000] Console: colour dummy device 80x25
  164. [    0.000000] console [tty1] enabled
  165. [    0.000000] console [ttyS2] enabled
  166. [    0.000000] tsc: Detected 500.000 MHz processor
  167. [    0.000078] Calibrating delay loop (skipped), value calculated using timer frequency.. 998.40 BogoMIPS (lpj=499200)
  168. [    0.000385] pid_max: default: 32768 minimum: 301
  169. [    0.000599] Security Framework initialized
  170. [    0.000760] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  171. [    0.000952] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  172. [    0.002048] CPU: Physical Processor ID: 0
  173. [    0.002180] CPU: Processor Core ID: 0
  174. [    0.002302] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  175. [    0.002471] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  176. [    0.002678] mce: CPU supports 6 MCE banks
  177. [    0.002816] CPU0: Thermal monitoring enabled (TM1)
  178. [    0.002967] process: using mwait in idle threads
  179. [    0.003120] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
  180. [    0.003277] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
  181. [    0.004332] Freeing SMP alternatives memory: 36K (c1d82000 - c1d8b000)
  182. [    0.004533] SFI: MCFG E34F6, 003C (v1  INTEL INTELFDK)
  183. [    0.004928] smpboot: APIC(0) Converting physical 0 to logical package 0
  184. [    0.005120] smpboot: Max logical packages: 1
  185. [    0.005255] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  186. [    0.005441] TSC deadline timer enabled
  187. [    0.005564] smpboot: CPU0: Genuine Intel(R) CPU   4000  @  500MHz (family: 0x6, model: 0x4a, stepping: 0x8)
  188. [    0.005868] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
  189. [    0.006193] ... version:                3
  190. [    0.006315] ... bit width:              40
  191. [    0.006438] ... generic registers:      2
  192. [    0.006560] ... value mask:             000000ffffffffff
  193. [    0.006760] ... max period:             000000ffffffffff
  194. [    0.006913] ... fixed-purpose events:   3
  195. [    0.007034] ... event mask:             0000000700000003
  196. [    0.013590] CPU 1 irqstacks, hard=f68f0000 soft=f68f2000
  197. [    0.013788] x86: Booting SMP configuration:
  198. [    0.013921] .... node  #0, CPUs:      #1
  199. [    0.014231] Initializing CPU#1
  200. [    0.074340] Skipped synchronization checks as TSC is reliable.
  201. [    0.074533] x86: Booted up 1 node, 2 CPUs
  202. [    0.074659] smpboot: Total of 2 processors activated (2005.48 BogoMIPS)
  203. [    0.076057] devtmpfs: initialized
  204. [    0.080456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  205. [    0.080566] kworker/u4:0 (20) used greatest stack depth: 7332 bytes left
  206. [    0.081087] pinctrl core: initialized pinctrl subsystem
  207. [    0.081488] SFI: SFI sysfs interfaces init success
  208. [    0.081895] regulator-dummy: no parameters
  209. [    0.082286] RTC time:  0:00:07, date: 01/01/00
  210. [    0.082349] kworker/u4:1 (24) used greatest stack depth: 7260 bytes left
  211. [    0.083168] NET: Registered protocol family 16
  212. [    0.087925] cpuidle: using governor menu
  213. [    0.090105] Using generic wifi platform data
  214. [    0.090730] PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0x3f500000-0x3f5fffff] (base 0x3f500000)
  215. [    0.091028] PCI: MMCONFIG at [mem 0x3f500000-0x3f5fffff] reserved in E820
  216. [    0.091221] PCI: Using MMCONFIG for extended config space
  217. [    0.091377] PCI: Using configuration type 1 for base access
  218. [    0.096802] kworker/u4:0 (102) used greatest stack depth: 7228 bytes left
  219. [    0.099409] kworker/u4:0 (51) used greatest stack depth: 7116 bytes left
  220. [    0.100345] kworker/u4:0 (69) used greatest stack depth: 6852 bytes left
  221. [    0.132460] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  222. [    0.134177] ACPI: Interpreter disabled.
  223. [    0.134503] bcm43xx-vmmc-regulator: Failed to request enable GPIO96: -517
  224. [    0.134748] reg-fixed-voltage reg-fixed-voltage.0.auto: Failed to register regulator: -517
  225. [    0.135323] vgaarb: loaded
  226. [    0.135907] SCSI subsystem initialized
  227. [    0.136522] libata version 3.00 loaded.
  228. [    0.137654] usbcore: registered new interface driver usbfs
  229. [    0.137966] usbcore: registered new interface driver hub
  230. [    0.138245] usbcore: registered new device driver usb
  231. [    0.138633] Linux video capture interface: v2.00
  232. [    0.138959] pps_core: LinuxPPS API ver. 1 registered
  233. [    0.139111] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  234. [    0.139408] PTP clock support registered
  235. [    0.140361] Advanced Linux Sound Architecture Driver Initialized.
  236. [    0.140621] Intel MID platform detected, using MID PCI ops
  237. [    0.140784] PCI: Probing PCI hardware
  238. [    0.140943] PCI: root bus 00: using default resources
  239. [    0.141096] PCI: Probing PCI hardware (bus 00)
  240. [    0.141420] PCI host bridge to bus 0000:00
  241. [    0.141563] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
  242. [    0.141747] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  243. [    0.141968] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  244. [    0.142247] pci 0000:00:00.0: [8086:1170] type 00 class 0x060000
  245. [    0.142774] pci 0000:00:01.0: [8086:1190] type 00 class 0x080501
  246. [    0.143020] pci 0000:00:01.0: reg 0x10: [mem 0xff3fc000-0xff3fc0ff]
  247. [    0.143328] pci 0000:00:01.0: PME# supported from D0 D3hot
  248. [    0.143775] pci 0000:00:01.2: [8086:1190] type 00 class 0x080501
  249. [    0.144013] pci 0000:00:01.2: reg 0x10: [mem 0xff3fa000-0xff3fa0ff]
  250. [    0.144317] pci 0000:00:01.2: PME# supported from D0 D3hot
  251. [    0.144766] pci 0000:00:01.3: [8086:1190] type 00 class 0x080501
  252. [    0.144979] pci 0000:00:01.3: reg 0x10: [mem 0xff3fb000-0xff3fb0ff]
  253. [    0.145305] pci 0000:00:01.3: PME# supported from D0 D3hot
  254. [    0.145769] pci 0000:00:02.0: [8086:1182] type 00 class 0x038000
  255. [    0.145984] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc1ffffff]
  256. [    0.146225] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff]
  257. [    0.146441] pci 0000:00:02.0: reg 0x20: [io  0x7ff8-0x7fff]
  258. [    0.146954] pci 0000:00:04.0: [8086:1191] type 00 class 0x070002
  259. [    0.147166] pci 0000:00:04.0: reg 0x10: [mem 0xff010000-0xff01007f]
  260. [    0.147503] pci 0000:00:04.0: PME# supported from D0 D3hot
  261. [    0.147961] pci 0000:00:04.1: [8086:1191] type 00 class 0x070002
  262. [    0.148175] pci 0000:00:04.1: reg 0x10: [mem 0xff010080-0xff0100ff]
  263. [    0.148546] pci 0000:00:04.1: PME# supported from D0 D3hot
  264. [    0.149004] pci 0000:00:04.2: [8086:1191] type 00 class 0x070002
  265. [    0.149217] pci 0000:00:04.2: reg 0x10: [mem 0xff010100-0xff01017f]
  266. [    0.149541] pci 0000:00:04.2: PME# supported from D0 D3hot
  267. [    0.149989] pci 0000:00:04.3: [8086:1191] type 00 class 0x070002
  268. [    0.150202] pci 0000:00:04.3: reg 0x10: [mem 0xff010180-0xff0101ff]
  269. [    0.150525] pci 0000:00:04.3: PME# supported from D0 D3hot
  270. [    0.150991] pci 0000:00:05.0: [8086:1192] type 00 class 0x070002
  271. [    0.151203] pci 0000:00:05.0: reg 0x10: [mem 0xff010400-0xff0107ff]
  272. [    0.151527] pci 0000:00:05.0: PME# supported from D0 D3hot
  273. [    0.151984] pci 0000:00:06.0: [8086:1193] type 00 class 0x088000
  274. [    0.152197] pci 0000:00:06.0: reg 0x10: [mem 0xff2a0000-0xff2a0fff]
  275. [    0.152520] pci 0000:00:06.0: PME# supported from D0 D3hot
  276. [    0.152968] pci 0000:00:06.1: [8086:1193] type 00 class 0x088000
  277. [    0.153181] pci 0000:00:06.1: reg 0x10: [mem 0xff2a1000-0xff2a1fff]
  278. [    0.153504] pci 0000:00:06.1: PME# supported from D0 D3hot
  279. [    0.153976] pci 0000:00:07.0: [8086:1194] type 00 class 0x088000
  280. [    0.154188] pci 0000:00:07.0: reg 0x10: [mem 0xff188000-0xff188fff]
  281. [    0.154509] pci 0000:00:07.0: PME# supported from D0 D3hot
  282. [    0.154967] pci 0000:00:07.1: [8086:1194] type 00 class 0x088000
  283. [    0.155180] pci 0000:00:07.1: reg 0x10: [mem 0xff189000-0xff189fff]
  284. [    0.155479] pci 0000:00:07.1: PME# supported from D0 D3hot
  285. [    0.155950] pci 0000:00:07.2: [8086:1194] type 00 class 0x088000
  286. [    0.156162] pci 0000:00:07.2: reg 0x10: [mem 0xff18a000-0xff18afff]
  287. [    0.156461] pci 0000:00:07.2: PME# supported from D0 D3hot
  288. [    0.156954] pci 0000:00:08.0: [8086:1195] type 00 class 0x078000
  289. [    0.157167] pci 0000:00:08.0: reg 0x10: [mem 0xff18b000-0xff18bfff]
  290. [    0.157466] pci 0000:00:08.0: PME# supported from D0 D3hot
  291. [    0.157957] pci 0000:00:08.1: [8086:1195] type 00 class 0x078000
  292. [    0.158170] pci 0000:00:08.1: reg 0x10: [mem 0xff18c000-0xff18cfff]
  293. [    0.158469] pci 0000:00:08.1: PME# supported from D0 D3hot
  294. [    0.158940] pci 0000:00:08.2: [8086:1195] type 00 class 0x078000
  295. [    0.159153] pci 0000:00:08.2: reg 0x10: [mem 0xff18d000-0xff18dfff]
  296. [    0.159452] pci 0000:00:08.2: PME# supported from D0 D3hot
  297. [    0.159934] pci 0000:00:08.3: [8086:1195] type 00 class 0x078000
  298. [    0.160147] pci 0000:00:08.3: reg 0x10: [mem 0xff18e000-0xff18efff]
  299. [    0.160447] pci 0000:00:08.3: PME# supported from D0 D3hot
  300. [    0.160940] pci 0000:00:09.0: [8086:1196] type 00 class 0x078000
  301. [    0.161153] pci 0000:00:09.0: reg 0x10: [mem 0xff18f000-0xff18ffff]
  302. [    0.161454] pci 0000:00:09.0: PME# supported from D0 D3hot
  303. [    0.161930] pci 0000:00:09.1: [8086:1196] type 00 class 0x078000
  304. [    0.162144] pci 0000:00:09.1: reg 0x10: [mem 0xff190000-0xff190fff]
  305. [    0.162444] pci 0000:00:09.1: PME# supported from D0 D3hot
  306. [    0.162912] pci 0000:00:09.2: [8086:1196] type 00 class 0x078000
  307. [    0.163124] pci 0000:00:09.2: reg 0x10: [mem 0xff191000-0xff191fff]
  308. [    0.163424] pci 0000:00:09.2: PME# supported from D0 D3hot
  309. [    0.163905] pci 0000:00:0a.0: [8086:1197] type 00 class 0x078000
  310. [    0.164117] pci 0000:00:0a.0: reg 0x10: [mem 0xff3f8000-0xff3f8fff]
  311. [    0.164417] pci 0000:00:0a.0: PME# supported from D0 D3hot
  312. [    0.164875] pci 0000:00:0b.0: [8086:1198] type 00 class 0x108000
  313. [    0.165087] pci 0000:00:0b.0: reg 0x10: [mem 0xf9038000-0xf903ffff]
  314. [    0.165386] pci 0000:00:0b.0: PME# supported from D0 D3hot
  315. [    0.165855] pci 0000:00:0c.0: [8086:1199] type 00 class 0x088000
  316. [    0.166069] pci 0000:00:0c.0: reg 0x10: [mem 0xff008000-0xff008fff]
  317. [    0.166266] pci 0000:00:0c.0: reg 0x14: [mem 0x000ddcc0-0x000ddccf]
  318. [    0.166554] pci 0000:00:0c.0: PME# supported from D0 D3hot
  319. [    0.167023] pci 0000:00:0d.0: [8086:119a] type 00 class 0x040100
  320. [    0.167236] pci 0000:00:0d.0: reg 0x10: [mem 0x05e00000-0x05ffffff]
  321. [    0.167433] pci 0000:00:0d.0: reg 0x14: [mem 0xff340000-0xff343fff]
  322. [    0.167629] pci 0000:00:0d.0: reg 0x18: [mem 0xff344000-0xff344fff]
  323. [    0.167824] pci 0000:00:0d.0: reg 0x1c: [mem 0xff2c0000-0xff2dffff]
  324. [    0.168046] pci 0000:00:0d.0: reg 0x20: [mem 0xff300000-0xff33ffff]
  325. [    0.168305] pci 0000:00:0d.0: PME# supported from D0 D3hot
  326. [    0.168744] pci 0000:00:0e.0: [8086:119b] type 00 class 0x088000
  327. [    0.168956] pci 0000:00:0e.0: reg 0x10: [mem 0xff298000-0xff29bfff]
  328. [    0.169179] pci 0000:00:0e.0: reg 0x14: [mem 0xff2a2000-0xff2a2fff]
  329. [    0.169471] pci 0000:00:0e.0: PME# supported from D0 D3hot
  330. [    0.169935] pci 0000:00:11.0: [8086:119e] type 00 class 0x0c0320
  331. [    0.170148] pci 0000:00:11.0: reg 0x10: [mem 0xf9100000-0xf911ffff]
  332. [    0.170473] pci 0000:00:11.0: PME# supported from D0 D3hot
  333. [    0.170921] pci 0000:00:12.0: [8086:119f] type 00 class 0x118000
  334. [    0.171134] pci 0000:00:12.0: reg 0x10: [mem 0xf9009000-0xf9009fff]
  335. [    0.171357] pci 0000:00:12.0: reg 0x14: [mem 0xf90a0000-0xf90affff]
  336. [    0.171557] pci 0000:00:12.0: reg 0x18: [mem 0xfa000000-0xfaffffff]
  337. [    0.171834] pci 0000:00:12.0: PME# supported from D0 D3hot
  338. [    0.172274] pci 0000:00:13.0: [8086:11a0] type 00 class 0x0b4000
  339. [    0.172511] pci 0000:00:13.0: reg 0x10: [mem 0xff009000-0xff009fff]
  340. [    0.172813] pci 0000:00:13.0: PME# supported from D0 D3hot
  341. [    0.173262] pci 0000:00:14.0: [8086:11a1] type 00 class 0x0b4000
  342. [    0.173497] pci 0000:00:14.0: reg 0x10: [mem 0xff00b000-0xff00bfff]
  343. [    0.173800] pci 0000:00:14.0: PME# supported from D0 D3hot
  344. [    0.174250] pci 0000:00:15.0: [8086:11a2] type 00 class 0x088000
  345. [    0.174462] pci 0000:00:15.0: reg 0x10: [mem 0xff192000-0xff192fff]
  346. [    0.174785] pci 0000:00:15.0: PME# supported from D0 D3hot
  347. [    0.175253] pci 0000:00:16.0: [8086:11a3] type 00 class 0x0b4000
  348. [    0.175466] pci 0000:00:16.0: reg 0x10: [mem 0xff0d9000-0xff0d90ff]
  349. [    0.175789] pci 0000:00:16.0: PME# supported from D0 D3hot
  350. [    0.176241] pci 0000:00:16.1: [8086:11a4] type 00 class 0x0b4000
  351. [    0.176454] pci 0000:00:16.1: reg 0x10: [mem 0x04819000-0x04898fff]
  352. [    0.176652] pci 0000:00:16.1: reg 0x14: [mem 0x04919000-0x04920fff]
  353. [    0.176963] pci 0000:00:16.1: PME# supported from D0 D3hot
  354. [    0.177439] pci 0000:00:17.0: [8086:11a5] type 00 class 0x088000
  355. [    0.177650] pci 0000:00:17.0: reg 0x10: [mem 0xff013000-0xff013fff]
  356. [    0.177974] pci 0000:00:17.0: PME# supported from D0 D3hot
  357. [    0.178428] pci 0000:00:18.0: [8086:11a6] type 00 class 0x038000
  358. [    0.178749] pci 0000:00:18.0: PME# supported from D0 D3hot
  359. [    0.179225] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  360. [    0.179536] PCI: pci_cache_line_size set to 64 bytes
  361. [    0.179861] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
  362. [    0.180061] e820: reserve RAM buffer [mem 0x3f500000-0x3fffffff]
  363. [    0.181721] NetLabel: Initializing
  364. [    0.181840] NetLabel:  domain hash size = 128
  365. [    0.181970] NetLabel:  protocols = UNLABELED CIPSOv4
  366. [    0.182232] NetLabel:  unlabeled traffic allowed by default
  367. [    0.184695] clocksource: Switched to clocksource refined-jiffies
  368. [    0.227425] VFS: Disk quotas dquot_6.6.0
  369. [    0.227637] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  370. [    0.228352] pnp: PnP ACPI: disabled
  371. [    0.242651] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
  372. [    0.242834] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  373. [    0.243133] NET: Registered protocol family 2
  374. [    0.244132] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  375. [    0.244454] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  376. [    0.244790] TCP: Hash tables configured (established 8192 bind 8192)
  377. [    0.245051] UDP hash table entries: 512 (order: 2, 16384 bytes)
  378. [    0.245258] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  379. [    0.245643] NET: Registered protocol family 1
  380. [    0.246252] RPC: Registered named UNIX socket transport module.
  381. [    0.246430] RPC: Registered udp transport module.
  382. [    0.246570] RPC: Registered tcp transport module.
  383. [    0.246708] RPC: Registered tcp NFSv4.1 backchannel transport module.
  384. [    0.586875] PCI: CLS 0 bytes, default 64
  385. [    0.614197] DMA-API: preallocated 65536 debug entries
  386. [    0.614360] DMA-API: debugging enabled by kernel config
  387. [    0.617609] Scanning for low memory corruption every 60 seconds
  388. [    0.620229] futex hash table entries: 512 (order: 3, 32768 bytes)
  389. [    0.620473] audit: initializing netlink subsys (disabled)
  390. [    0.620675] audit: type=2000 audit(946684806.593:1): initialized
  391. [    0.622868] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  392. [    0.633789] kworker/u4:1 (702) used greatest stack depth: 6808 bytes left
  393. [    0.637541] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  394. [    0.639573] NFS: Registering the id_resolver key type
  395. [    0.639804] Key type id_resolver registered
  396. [    0.639937] Key type id_legacy registered
  397. [    0.640113] ntfs: driver 2.1.32 [Flags: R/O].
  398. [    0.640968] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
  399. [    0.647328] bounce: pool size: 64 pages
  400. [    0.647757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  401. [    0.647983] io scheduler noop registered
  402. [    0.648104] io scheduler deadline registered
  403. [    0.648482] io scheduler cfq registered (default)
  404. [    0.653931] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  405. [    0.657562] dw_dmac_pci 0000:00:0e.0: DesignWare DMA Controller, 8 channels
  406. [    0.660834] dw_dmac_pci 0000:00:15.0: DesignWare DMA Controller, 8 channels
  407. [    0.662790] hsu_dma_pci 0000:00:05.0: Found HSU DMA, 12 channels
  408. [    0.663486] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  409. [    0.665521] serial: probe of 0000:00:04.0 failed with error -16
  410. [    0.672152] 8250_mid: probe of 0000:00:04.0 failed with error -16
  411. [    0.672735] 0000:00:04.1: ttyS0 at MMIO 0xff010080 (irq = 28, base_baud = 1843200) is a TI16750
  412. [    0.673705] 0000:00:04.2: ttyS1 at MMIO 0xff010100 (irq = 29, base_baud = 1843200) is a TI16750
  413. [    0.674652] console [ttyS2] disabled
  414. [    0.674824] 0000:00:04.3: ttyS2 at MMIO 0xff010180 (irq = 54, base_baud = 1843200) is a TI16750
  415. [    2.777546] console [ttyS2] enabled
  416. [    2.781706] Non-volatile memory driver v1.3
  417. [    2.786422] Linux agpgart interface v0.103
  418. [    2.791014] [drm] Initialized drm 1.1.0 20060810
  419. [    2.795795] usbcore: registered new interface driver udl
  420. [    2.817450] brd: module loaded
  421. [    2.828381] loop: module loaded
  422. [    2.840786] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  423. [    2.846941] e100: Copyright(c) 1999-2006 Intel Corporation
  424. [    2.852644] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  425. [    2.859759] e1000: Copyright (c) 1999-2006 Intel Corporation.
  426. [    2.865691] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  427. [    2.871572] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  428. [    2.877688] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  429. [    2.884699] igb: Copyright (c) 2007-2014 Intel Corporation.
  430. [    2.890441] sky2: driver version 1.30
  431. [    2.895077] usbcore: registered new interface driver r8152
  432. [    2.900723] usbcore: registered new interface driver asix
  433. [    2.906259] usbcore: registered new interface driver ax88179_178a
  434. [    2.912488] usbcore: registered new interface driver cdc_ether
  435. [    2.918454] usbcore: registered new interface driver net1080
  436. [    2.924242] usbcore: registered new interface driver cdc_subset
  437. [    2.930299] usbcore: registered new interface driver zaurus
  438. [    2.936001] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  439. [    2.943567] usbcore: registered new interface driver cdc_ncm
  440. [    2.952641] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  441. [    2.959240] ehci-pci: EHCI PCI platform driver
  442. [    2.963835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  443. [    2.970095] ohci-pci: OHCI PCI platform driver
  444. [    2.974685] uhci_hcd: USB Universal Host Controller Interface driver
  445. [    2.981441] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  446. [    2.987238] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
  447. [    2.995455] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010
  448. [    3.004286] xhci-hcd xhci-hcd.2.auto: irq 34, io mem 0xf9100000
  449. [    3.010494] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  450. [    3.017358] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  451. [    3.024645] usb usb1: Product: xHCI Host Controller
  452. [    3.029569] usb usb1: Manufacturer: Linux 4.8.0-rc3 xhci-hcd
  453. [    3.035270] usb usb1: SerialNumber: xhci-hcd.2.auto
  454. [    3.040928] hub 1-0:1.0: USB hub found
  455. [    3.044794] hub 1-0:1.0: 1 port detected
  456. [    3.049212] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  457. [    3.055015] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
  458. [    3.062847] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  459. [    3.071179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  460. [    3.078031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  461. [    3.085313] usb usb2: Product: xHCI Host Controller
  462. [    3.090236] usb usb2: Manufacturer: Linux 4.8.0-rc3 xhci-hcd
  463. [    3.095938] usb usb2: SerialNumber: xhci-hcd.2.auto
  464. [    3.101590] hub 2-0:1.0: USB hub found
  465. [    3.105452] hub 2-0:1.0: 1 port detected
  466. [    3.110077] usbcore: registered new interface driver cdc_acm
  467. [    3.115803] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  468. [    3.123977] usbcore: registered new interface driver usblp
  469. [    3.129666] usbcore: registered new interface driver usb-storage
  470. [    3.135885] usbcore: registered new interface driver usbserial
  471. [    3.141842] usbcore: registered new interface driver pl2303
  472. [    3.147533] usbserial: USB Serial support registered for pl2303
  473. [    3.154193] mousedev: PS/2 mouse device common for all mice
  474. [    3.176660] usbcore: registered new interface driver uvcvideo
  475. [    3.182481] USB Video Class driver (1.1.1)
  476. [    3.186797] usbcore: registered new interface driver usbtv
  477. [    3.192849] intel_mid_wdt intel_mid_wdt: Intel MID watchdog device probed
  478. [    3.200293] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  479. [    3.208896] sdhci: Secure Digital Host Controller Interface driver
  480. [    3.215127] sdhci: Copyright(c) Pierre Ossman
  481. [    3.219594] sdhci-pci 0000:00:01.0: SDHCI controller found [8086:1190] (rev 1)
  482. [    3.235573] mmc0: SDHCI controller on PCI [0000:00:01.0] using ADMA
  483. [    3.242009] sdhci-pci 0000:00:01.2: SDHCI controller found [8086:1190] (rev 1)
  484. [    3.251833] sdhci-pci 0000:00:01.3: SDHCI controller found [8086:1190] (rev 1)
  485. [    3.262127] hidraw: raw HID events driver (C) Jiri Kosina
  486. [    3.269046] usbcore: registered new interface driver usbhid
  487. [    3.274687] usbhid: USB HID core driver
  488. [    3.280351] Netfilter messages via NETLINK v0.30.
  489. [    3.285558] nf_conntrack version 0.5.0 (15360 buckets, 61440 max)
  490. [    3.297434] ctnetlink v0.93: registering with nfnetlink.
  491. [    3.303820] ip_tables: (C) 2000-2006 Netfilter Core Team
  492. [    3.309445] Initializing XFRM netlink socket
  493. [    3.314996] NET: Registered protocol family 10
  494. [    3.321805] ip6_tables: (C) 2000-2006 Netfilter Core Team
  495. [    3.332166] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  496. [    3.347412] NET: Registered protocol family 17
  497. [    3.354078] Key type dns_resolver registered
  498. [    3.368177] microcode: sig=0x406a8, pf=0x1, revision=0x81f
  499. [    3.373915] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  500. [    3.382795] Using IPI No-Shortcut mode
  501. [    3.387578] registered taskstats version 1
  502. [    3.393174] bcm43xx-vmmc-regulator: at 2000 mV
  503. [    3.397987] reg-fixed-voltage reg-fixed-voltage.0.auto: bcm43xx-vmmc-regulator supplying 2000000uV
  504. [    3.407168]   Magic number: 4:6:0
  505. [    3.410644] console [netcon0] enabled
  506. [    3.414387] netconsole: network logging started
  507. [    3.419500] PM: Hibernation image not present or could not be loaded.
  508. [    3.426015] bcm43xx-vmmc-regulator: disabling
  509. [    3.430426] ALSA device list:
  510. [    3.433429]   No soundcards found.
  511. [    3.437253] md: Waiting for all devices to be available before autodetect
  512. [    3.444093] md: If you don't use raid, use raid=noautodetect
  513. [    3.444705] mmc0: new DDR MMC card at address 0001
  514. [    3.447961] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
  515. [    3.448264] mmcblk0boot0: mmc0:0001 H4G1d partition 1 4.00 MiB
  516. [    3.448552] mmcblk0boot1: mmc0:0001 H4G1d partition 2 4.00 MiB
  517. [    3.448833] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
  518. [    3.452071]  mmcblk0: p1 p2 p3 p4 p5
  519. [    3.481543] md: Autodetecting RAID arrays.
  520. [    3.485729] md: Scanned 0 and added 0 devices.
  521. [    3.490220] md: autorun ...
  522. [    3.493050] md: ... autorun DONE.
  523. [    3.536278] EXT4-fs (mmcblk0p5): recovery complete
  524. [    3.542005] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  525. [    3.550212] VFS: Mounted root (ext4 filesystem) on device 179:5.
  526. [    3.558535] devtmpfs: mounted
  527. [    3.562145] Freeing unused kernel memory: 660K (c1cdd000 - c1d82000)
  528. [    3.568744] Write protecting the kernel text: 9320k
  529. [    3.573917] Write protecting the kernel read-only data: 2920k
  530. [    3.607461] random: fast init done
  531. [    3.623088] init-early.sh (1115) used greatest stack depth: 6568 bytes left
  532.  
  533.    OpenRC 0.21.3.5b5730e is starting up Linux 4.8.0-rc3 (i686)
  534.  
  535.  * Mounting /proc ... [ ok ]
  536.  * Mounting /run ... * /run/openrc: creating directory
  537.  * /run/lock: creating directory
  538.  * /run/lock: correcting owner
  539. [    3.699650] cp (1131) used greatest stack depth: 6500 bytes left
  540. [    3.780415] openrc-run.sh (1143) used greatest stack depth: 6400 bytes left
  541.  * Remounting devtmpfs on /dev ... [ ok ]
  542.  * Mounting /dev/mqueue ... [ ok ]
  543.  * Mounting /dev/pts ... [ ok ]
  544.  * Mounting /dev/shm ... [ ok ]
  545.  * Mounting /sys ... [ ok ]
  546.  * Mounting debug filesystem ... [ ok ]
  547.  * Mounting persistent storage (pstore) filesystem ... [ ok ]
  548.  * Mounting cgroup filesystem ... [ ok ]
  549.  * Starting busybox mdev ... [ ok ]
  550.  * Loading hardware drivers ... [ ok ]
  551.  * Setting system clock using the hardware clock [UTC] ...hwclock: can't open '/dev/misc/rtc': No such file or directory
  552. * Failed to set the system clock
  553. [ !! ]
  554. * Checking local filesystems  ... [ ok ]
  555. * Remounting filesystems ... [ ok ]
  556. * Mounting local filesystems ... [ ok ]
  557. * Configuring kernel parameters ... [ ok ]
  558. * Creating user login records ... [ ok ]
  559. * Wiping /tmp directory ... [ ok ]
  560. * Setting hostname ... [ ok ]
  561. * Initializing random number generator ... [ ok ]
  562.  
  563. Welcome to Alpine Linux 3.4
  564. Kernel 4.8.0-rc3 on an i686 (/dev/ttyS2)
  565.  
  566. localhost login: root
  567. Welcome to Alpine!
  568.  
  569. The Alpine Wiki contains a large amount of how-to guides and general
  570. information about administrating Alpine systems.
  571. See <http://wiki.alpinelinux.org>.
  572.  
  573. You can setup the system with the command: setup-alpine
  574.  
  575. You may change this message by editing /etc/motd.
  576.  
  577. login[1566]: root login on 'ttyS2'
  578. localhost:~#
Add Comment
Please, Sign In to add comment