ini file

[HOSTMOT2]
DRIVER=hm2_pci
BOARD=5i20
CONFIG="firmware=hm2/5i20/SVST8_4.BIT num_encoders=4 num_pwmgens=3 num_stepgens=0"




[EMC]

# Name of machine, for use with display, etc.
MACHINE =               HM2-Servo

# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
#DEBUG =                0x00000003
#DEBUG =                0x00000007
DEBUG = 0




[DISPLAY]

# Name of display program, e.g., tkemc
DISPLAY =              axis

# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME =            0.100

# Path to help file
HELP_FILE =             tklinucnc.txt

# Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET =       RELATIVE

# Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK =     ACTUAL

# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE =     1.5

# Prefix to be used
PROGRAM_PREFIX = /home/aram/linuxcnc/nc_files

# Introductory graphic
INTRO_GRAPHIC =         linuxcnc.gif
INTRO_TIME =            5


[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python


[TASK]

# Name of task controller program, e.g., milltask
TASK =                  milltask

# Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME =            0.010




[RS274NGC]

# File containing interpreter variables
PARAMETER_FILE = hm2-servo.var




[EMCMOT]

EMCMOT =                motmod

# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT =          1.0

# Interval between tries to emcmot, in seconds
COMM_WAIT =             0.010

# Servo task period, in nanoseconds
SERVO_PERIOD =          500000




[HAL]

# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.

# list of hal config files to run through halcmd
# files are executed in the order in which they appear

HALFILE = hm2-servo.hal

# list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD =               save neta




[TRAJ]

AXES =                  3
# COORDINATES =         X Y Z R P W
COORDINATES =           X Y Z
HOME =                  0 0 0
LINEAR_UNITS =          inch
ANGULAR_UNITS =         degree
CYCLE_TIME =            0.010
DEFAULT_VELOCITY =     05.0
MAX_VELOCITY =      6.0
DEFAULT_ACCELERATION =  5.0
MAX_ACCELERATION =     6.0




[AXIS_0]

TYPE =                  LINEAR
MAX_VELOCITY =        .5
MAX_ACCELERATION =    9.0
BACKLASH =              0.000
FERROR =                1.00
MIN_FERROR =            0.01

INPUT_SCALE =            167936

OUTPUT_SCALE =          1
OUTPUT_OFFSET =         0.0
MAX_OUTPUT =            1

MIN_LIMIT =           0.50
MAX_LIMIT =            7.0
HOME =                  0.500
HOME_OFFSET =           0.
HOME_SEARCH_VEL =       0.10
HOME_LATCH_VEL =        0.010
# the X axis servo's encoder does not have an index channel, so we have to home without index
HOME_USE_INDEX =        NO
HOME_IGNORE_LIMITS =    NO

# PID tuning params
DEADBAND =              0.000015
P =                    42
I =                     0.7
D =                     0.4
FF0 =                   0
FF1 =                   1.2
FF2 =			0.0035
BIAS =                  0

#########################################################
#HOME_IS_SHARED=true
#HOME_SEQUENCE 0|1|2|



[AXIS_1]

TYPE =                  LINEAR
MAX_VELOCITY =          0.5
MAX_ACCELERATION =      6.0
BACKLASH =              0.000
FERROR =                1.00
MIN_FERROR =            0.008

INPUT_SCALE =           167936

OUTPUT_SCALE =          1
OUTPUT_OFFSET =         0.0
MAX_OUTPUT =            1

MIN_LIMIT =            -8.0
MAX_LIMIT =            1.0
HOME =                  -0.000
HOME_OFFSET =           0.0
HOME_SEARCH_VEL =      0.10
HOME_LATCH_VEL =        0.010
# the Y axis servo's encoder has an index channel, so we use it to improve the home accuracy
HOME_USE_INDEX =        no
HOME_IGNORE_LIMITS =    no

# PID tuning params
DEADBAND =              0.000015
P =                     17
I =                     1
D =                     0.01
FF0 =                   0
FF1 =                   1.2
FF2 =			0
BIAS =                  0
#########################################################
#HOME_IS_SHARED=true false
#HOME_SEQUENCE 0|1|2|



[AXIS_2]

TYPE =                  LINEAR
MAX_VELOCITY =          0.5
MAX_ACCELERATION =     6.0
BACKLASH =              0.000
FERROR =                1.00
MIN_FERROR =            0.01

INPUT_SCALE =           167936

OUTPUT_SCALE =          1
OUTPUT_OFFSET =         0.0
MAX_OUTPUT =            1

MIN_LIMIT =             0.50
MAX_LIMIT =            4.0
HOME =                  0.0
HOME_OFFSET =           0.0
HOME_SEARCH_VEL =       0.10
HOME_LATCH_VEL =        0.010
# the Z axis servo's encoder does not have an index channel, so we have to home without index
HOME_USE_INDEX =        no
HOME_IGNORE_LIMITS =    no

# PID tuning params
DEADBAND =              0.000015
P =                    42
I =                     0.7
D =                     0.4
FF0 =                   0
FF1 =                   1.2
FF2 =			0.0035
BIAS =                  0
#########################################################
#HOME_IS_SHARED=false
#HOME_SEQUENCE 0|1|2|



[EMCIO]

# Name of IO controller program, e.g., io
EMCIO =                 io

# cycle time, in seconds
CYCLE_TIME =            0.100

# tool table file
TOOL_TABLE = tool.tbl